From: Rakesh Pillai <pillair@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Rakesh Pillai <pillair@qti.qualcomm.com>,
Govind Singh <govinds@qti.qualcomm.com>
Subject: [PATCH 4/4] ath10k: WMI: add hw params entry for wcn3990
Date: Wed, 29 Nov 2017 15:21:37 +0530 [thread overview]
Message-ID: <1511949097-524-4-git-send-email-pillair@qti.qualcomm.com> (raw)
In-Reply-To: <1511949097-524-1-git-send-email-pillair@qti.qualcomm.com>
Add hw params entry for wcn3990 and populate various
target specific values for wcn3990.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.c | 2 ++
drivers/net/wireless/ath/ath10k/hw.h | 10 ++++++++++
3 files changed, 30 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index be18913..6abffb5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -405,6 +405,24 @@
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
},
+ {
+ .id = WCN3990_HW_1_0_DEV_VERSION,
+ .dev_id = 0,
+ .name = "wcn3990 hw1.0",
+ .continuous_frag_desc = true,
+ .tx_chain_mask = 0x7,
+ .rx_chain_mask = 0x7,
+ .max_spatial_stream = 4,
+ .fw = {
+ .dir = WCN3990_HW_1_0_FW_DIR,
+ },
+ .sw_decrypt_mcast_mgmt = true,
+ .hw_ops = &wcn3990_ops,
+ .decap_align_bytes = 1,
+ .num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+ .ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
+ .num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
+ },
};
static const char *const ath10k_core_fw_feature_str[] = {
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 88955bb..76b9b41 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -931,3 +931,5 @@ static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes(struct htt_rx_desc *rxd)
.set_coverage_class = ath10k_hw_qca988x_set_coverage_class,
.enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock,
};
+
+const struct ath10k_hw_ops wcn3990_ops = {0};
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index fedb6c7..90ad39b 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -128,6 +128,10 @@ enum qca9377_chip_id_rev {
#define QCA4019_HW_1_0_BOARD_DATA_FILE "board.bin"
#define QCA4019_HW_1_0_PATCH_LOAD_ADDR 0x1234
+/* WCN3990 1.0 definitions */
+#define WCN3990_HW_1_0_DEV_VERSION ATH10K_HW_WCN3990
+#define WCN3990_HW_1_0_FW_DIR ATH10K_FW_DIR "/WCN3990/hw3.0"
+
#define ATH10K_FW_FILE_BASE "firmware"
#define ATH10K_FW_API_MAX 6
#define ATH10K_FW_API_MIN 2
@@ -571,6 +575,7 @@ struct ath10k_hw_ops {
extern const struct ath10k_hw_ops qca988x_ops;
extern const struct ath10k_hw_ops qca99x0_ops;
extern const struct ath10k_hw_ops qca6174_ops;
+extern const struct ath10k_hw_ops wcn3990_ops;
extern const struct ath10k_hw_clk_params qca6174_clk[];
@@ -667,6 +672,11 @@ struct ath10k_hw_ops {
#define TARGET_TLV_NUM_MSDU_DESC (1024 + 32)
#define TARGET_TLV_NUM_WOW_PATTERNS 22
+/* Target specific defines for WMI-HL-1.0 firmware */
+#define TARGET_HL_10_TLV_NUM_PEERS 14
+#define TARGET_HL_10_TLV_AST_SKID_LIMIT 6
+#define TARGET_HL_10_TLV_NUM_WDS_ENTRIES 2
+
/* Diagnostic Window */
#define CE_DIAG_PIPE 7
--
1.9.1
prev parent reply other threads:[~2017-11-29 9:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 9:51 [PATCH 1/4] ath10k: WMI: modify svc bitmap parsing for wcn3990 Rakesh Pillai
2017-11-29 9:51 ` [PATCH 2/4] ath10k: WMI: Add management tx by reference support over wmi Rakesh Pillai
2017-11-29 9:51 ` [PATCH 3/4] ath10k: WMI: get wmi init parameter values from hw params Rakesh Pillai
2017-11-29 22:39 ` Sebastian Gottschall
2017-11-29 9:51 ` Rakesh Pillai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511949097-524-4-git-send-email-pillair@qti.qualcomm.com \
--to=pillair@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=govinds@qti.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox