From: Rakesh Pillai <pillair@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Rakesh Pillai <pillair@qti.qualcomm.com>,
Govind Singh <govinds@qti.qualcomm.com>
Subject: [PATCH v3 3/4] ath10k: WMI: get wmi init parameter values from hw params
Date: Mon, 11 Dec 2017 19:52:54 +0530 [thread overview]
Message-ID: <1513002175-2498-4-git-send-email-pillair@qti.qualcomm.com> (raw)
In-Reply-To: <1513002175-2498-1-git-send-email-pillair@qti.qualcomm.com>
The parameter values for skid limit, number of peers and wds
entries values which are sent in wmi init cmd are hardware
specific.
Add support to obtain skid limit, number of peers and wds entries
values from hw params which will have the hw specific values
for these parameters.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 36 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 4 ++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 7 +++---
3 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 1e4e18e5edcb..be189132623d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -75,6 +75,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA9887_HW_1_0_VERSION,
@@ -99,6 +102,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -122,6 +128,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -145,6 +154,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA6174_HW_3_0_VERSION,
@@ -168,6 +180,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA6174_HW_3_2_VERSION,
@@ -194,6 +209,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -223,6 +241,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 11,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -257,6 +278,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 1560,
.vht160_mcs_tx_highest = 1560,
.n_cipher_suites = 11,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -290,6 +314,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 780,
.vht160_mcs_tx_highest = 780,
.n_cipher_suites = 11,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -313,6 +340,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -338,6 +368,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 8,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -368,6 +401,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.vht160_mcs_rx_highest = 0,
.vht160_mcs_tx_highest = 0,
.n_cipher_suites = 11,
+ .num_peers = TARGET_TLV_NUM_PEERS,
+ .ast_skid_limit = 0x10,
+ .num_wds_entries = 0x20,
},
};
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 05f26e5858ad..fedb6c799374 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -553,6 +553,10 @@ struct ath10k_hw_params {
/* Number of ciphers supported (i.e First N) in cipher_suites array */
int n_cipher_suites;
+
+ u32 num_peers;
+ u32 ast_skid_limit;
+ u32 num_wds_entries;
};
struct htt_rx_desc;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 9910cc65af90..8d53063bd503 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1439,7 +1439,10 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
cfg->num_vdevs = __cpu_to_le32(TARGET_TLV_NUM_VDEVS);
- cfg->num_peers = __cpu_to_le32(TARGET_TLV_NUM_PEERS);
+
+ cfg->num_peers = __cpu_to_le32(ar->hw_params.num_peers);
+ cfg->ast_skid_limit = __cpu_to_le32(ar->hw_params.ast_skid_limit);
+ cfg->num_wds_entries = __cpu_to_le32(ar->hw_params.num_wds_entries);
if (test_bit(WMI_SERVICE_RX_FULL_REORDER, ar->wmi.svc_map)) {
cfg->num_offload_peers = __cpu_to_le32(TARGET_TLV_NUM_VDEVS);
@@ -1451,7 +1454,6 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cfg->num_peer_keys = __cpu_to_le32(2);
cfg->num_tids = __cpu_to_le32(TARGET_TLV_NUM_TIDS);
- cfg->ast_skid_limit = __cpu_to_le32(0x10);
cfg->tx_chain_mask = __cpu_to_le32(0x7);
cfg->rx_chain_mask = __cpu_to_le32(0x7);
cfg->rx_timeout_pri[0] = __cpu_to_le32(0x64);
@@ -1467,7 +1469,6 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cfg->num_mcast_table_elems = __cpu_to_le32(0);
cfg->mcast2ucast_mode = __cpu_to_le32(0);
cfg->tx_dbg_log_size = __cpu_to_le32(0x400);
- cfg->num_wds_entries = __cpu_to_le32(0x20);
cfg->dma_burst_size = __cpu_to_le32(0);
cfg->mac_aggr_delim = __cpu_to_le32(0);
cfg->rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(0);
--
2.11.0
next prev parent reply other threads:[~2017-12-11 14:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-11 14:22 [PATCH v3 0/4] WMI changes for wcn3990 Rakesh Pillai
2017-12-11 14:22 ` [PATCH v3 1/4] ath10k: WMI: modify svc bitmap parsing " Rakesh Pillai
2017-12-14 15:33 ` [v3,1/4] " Kalle Valo
2017-12-11 14:22 ` [PATCH v3 2/4] ath10k: WMI: Add management tx by reference support over wmi Rakesh Pillai
2017-12-11 14:22 ` Rakesh Pillai [this message]
2017-12-11 14:22 ` [PATCH v3 4/4] ath10k: WMI: add hw params entry for wcn3990 Rakesh Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513002175-2498-4-git-send-email-pillair@qti.qualcomm.com \
--to=pillair@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=govinds@qti.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox