[PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Izzy Kulbe]

Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
which is using the Intel Wireless-AC 9260 chip

Signed-off-by: Izzy Kulbe <kernel@unikorn.me>

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 56fc28750a41..62ab4790687c 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -543,6 +543,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 	{IWL_PCI_DEVICE(0x2526, 0x1210, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1410, iwl9270_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1420, iwl9460_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x2526, 0x1550, iwl9270_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1610, iwl9270_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4010, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4030, iwl9560_2ac_cfg)},
-- 
2.16.2

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Izzy Kulbe]

nvm the last message, attached the wrong file using the 9270 instead of the 9260 firmware, which obviously wouldn't work. Here's the working patch:


Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
which is using the Intel Wireless-AC 9260 chip

Signed-off-by: Izzy Kulbe <kernel@unikorn.me>

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c /drivers/net/wireless/intel/iwlwifi/pcie/drv.c
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -543,6 +543,7 @@ static const struct pci_device_id iwl_hw_card_ids[]
= {
 	{IWL_PCI_DEVICE(0x2526, 0x1210, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1410, iwl9270_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1420, iwl9460_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x2526, 0x1550, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x1610, iwl9270_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4010, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x4030, iwl9560_2ac_cfg)},

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Kalle Valo]

Izzy Kulbe <kernel@unikorn.me> writes:

> nvm the last message, attached the wrong file using the 9270 instead of the 9260 firmware, which obviously wouldn't work. Here's the working patch:
>
>
> Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
> which is using the Intel Wireless-AC 9260 chip
>
> Signed-off-by: Izzy Kulbe <kernel@unikorn.me>
>
> ---

You should put the comment "nvm the last message..." under the "---"
line so that git-am can ignore it.

-- 
Kalle Valo

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Izzy Kulbe]

On Tue, 2018-03-27 at 14:48 +0300, Kalle Valo wrote:
> Izzy Kulbe <kernel@unikorn.me> writes:
> 
> > nvm the last message, attached the wrong file using the 9270 instead of the 9260 firmware, which obviously wouldn't work. Here's the working patch:
> > 
> > 
> > Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
> > which is using the Intel Wireless-AC 9260 chip
> > 
> > Signed-off-by: Izzy Kulbe <kernel@unikorn.me>
> > 
> > ---
> 
> You should put the comment "nvm the last message..." under the "---"
> line so that git-am can ignore it.

Sorry, still new to the whole process. should i just resend 
that message with the proper order? 

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Luciano Coelho]

On Tue, 2018-03-27 at 14:03 +0200, Izzy Kulbe wrote:
> On Tue, 2018-03-27 at 14:48 +0300, Kalle Valo wrote:
> > Izzy Kulbe <kernel@unikorn.me> writes:
> > 
> > > nvm the last message, attached the wrong file using the 9270
> > > instead of the 9260 firmware, which obviously wouldn't work.
> > > Here's the working patch:
> > > 
> > > 
> > > Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
> > > which is using the Intel Wireless-AC 9260 chip
> > > 
> > > Signed-off-by: Izzy Kulbe <kernel@unikorn.me>
> > > 
> > > ---
> > 
> > You should put the comment "nvm the last message..." under the "---
> > "
> > line so that git-am can ignore it.
> 
> Sorry, still new to the whole process. should i just resend 
> that message with the proper order? 

Wait a bit.  This ID looks strange, someone else reported this already
and it looked strange, with an incorrect subsystem vendor ID.

Can you run lspci like this and let us know the results?

lspci -nv -s 3b:00.0

--
Cheers,
Luca.

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Luciano Coelho]

On Tue, 2018-03-27 at 15:37 +0300, Luciano Coelho wrote:
> On Tue, 2018-03-27 at 14:03 +0200, Izzy Kulbe wrote:
> > On Tue, 2018-03-27 at 14:48 +0300, Kalle Valo wrote:
> > > Izzy Kulbe <kernel@unikorn.me> writes:
> > > 
> > > > nvm the last message, attached the wrong file using the 9270
> > > > instead of the 9260 firmware, which obviously wouldn't work.
> > > > Here's the working patch:
> > > > 
> > > > 
> > > > Add support for Rivet Networks Killer Wireless-AC 1550
> > > > chipset, 
> > > > which is using the Intel Wireless-AC 9260 chip
> > > > 
> > > > Signed-off-by: Izzy Kulbe <kernel@unikorn.me>
> > > > 
> > > > ---
> > > 
> > > You should put the comment "nvm the last message..." under the "-
> > > --
> > > "
> > > line so that git-am can ignore it.
> > 
> > Sorry, still new to the whole process. should i just resend 
> > that message with the proper order? 
> 
> Wait a bit.  This ID looks strange, someone else reported this
> already
> and it looked strange, with an incorrect subsystem vendor ID.
> 
> Can you run lspci like this and let us know the results?
> 
> lspci -nv -s 3b:00.0

Sorry, please substitute the 3b:00.0 with the correct PCI slot in your
system.  If you're not sure, remove the '-s 3b:00.0' entirely so we'll
get the results for all devices.

--
Luca.

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Izzy Kulbe]

On Tue, 2018-03-27 at 15:38 +0300, Luciano Coelho wrote:
> On Tue, 2018-03-27 at 15:37 +0300, Luciano Coelho wrote:
> > On Tue, 2018-03-27 at 14:03 +0200, Izzy Kulbe wrote:
> > Wait a bit.  This ID looks strange, someone else reported this
> > already
> > and it looked strange, with an incorrect subsystem vendor ID.
> > 
> > Can you run lspci like this and let us know the results?
> > weird 
> > lspci -nv -s 3b:00.0
> 
> Sorry, please substitute the 3b:00.0 with the correct PCI slot in your
> system.  If you're not sure, remove the '-s 3b:00.0' entirely so we'll
> get the results for all devices.
> 
> --
> Luca.

The subsystem device in lspci itself reports "Bigfoot Networks, 
Inc. Wireless-AC 9260" instead of when lookup is enabled. AFAIR this
was a company that was bought by Qualcomm? So not Rivet/Killer. 

Here's the lspci output:

root@dokidoki $> # lspci-nv -s 04:00.0
04:00.0 0280: 8086:2526 (rev 29)
	Subsystem: 1a56:1550
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at d3d00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [40] Express Endpoint, MSI 00
	Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Latency Tolerance Reporting
	Capabilities: [154] L1 PM Substates
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Luciano Coelho]

On Tue, 2018-03-27 at 14:48 +0200, Izzy Kulbe wrote:
> On Tue, 2018-03-27 at 15:38 +0300, Luciano Coelho wrote:
> > On Tue, 2018-03-27 at 15:37 +0300, Luciano Coelho wrote:
> > > On Tue, 2018-03-27 at 14:03 +0200, Izzy Kulbe wrote:
> > > Wait a bit.  This ID looks strange, someone else reported this
> > > already
> > > and it looked strange, with an incorrect subsystem vendor ID.
> > > 
> > > Can you run lspci like this and let us know the results?
> > > weird 
> > > lspci -nv -s 3b:00.0
> > 
> > Sorry, please substitute the 3b:00.0 with the correct PCI slot in
> > your
> > system.  If you're not sure, remove the '-s 3b:00.0' entirely so
> > we'll
> > get the results for all devices.
> > 
> > --
> > Luca.
> 
> The subsystem device in lspci itself reports "Bigfoot Networks, 
> Inc. Wireless-AC 9260" instead of when lookup is enabled. AFAIR this
> was a company that was bought by Qualcomm? So not Rivet/Killer. 
> 
> Here's the lspci output:
> 
> root@dokidoki $> # lspci-nv -s 04:00.0
> 04:00.0 0280: 8086:2526 (rev 29)
> 	Subsystem: 1a56:1550
> 	Flags: bus master, fast devsel, latency 0, IRQ 17
> 	Memory at d3d00000 (64-bit, non-prefetchable) [size=16K]
> 	Capabilities: [c8] Power Management version 3
> 	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
> 	Capabilities: [40] Express Endpoint, MSI 00
> 	Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
> 	Capabilities: [100] Advanced Error Reporting
> 	Capabilities: [14c] Latency Tolerance Reporting
> 	Capabilities: [154] L1 PM Substates
> 	Kernel driver in use: iwlwifi
> 	Kernel modules: iwlwifi

Thanks!

Yeah, this looks wrong and the same as someone else reported. :(

This value is coming from the OTP in the NIC and seems to be wrong.  I
have to contact our engineer who is responsible for the OTP data.  I'll
let you know once I get back some more information.

--
Cheers,
Luca.

Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

[Kalle Valo]

Izzy Kulbe <kernel@unikorn.me> writes:

> On Tue, 2018-03-27 at 14:48 +0300, Kalle Valo wrote:
>> Izzy Kulbe <kernel@unikorn.me> writes:
>> 
>> > nvm the last message, attached the wrong file using the 9270
>> > instead of the 9260 firmware, which obviously wouldn't work.
>> > Here's the working patch:
>> > 
>> > 
>> > Add support for Rivet Networks Killer Wireless-AC 1550 chipset, 
>> > which is using the Intel Wireless-AC 9260 chip
>> > 
>> > Signed-off-by: Izzy Kulbe <kernel@unikorn.me>
>> > 
>> > ---
>> 
>> You should put the comment "nvm the last message..." under the "---"
>> line so that git-am can ignore it.
>
> Sorry, still new to the whole process. should i just resend 
> that message with the proper order? 

Luca already replied, so don't resend yet. But please do read the
documentation, it should help you with the basics and have pointers to
other docs:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
Kalle Valo