From: akolli@codeaurora.org
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Anilkumar Kolli <akolli@codeaurora.org>
Subject: [PATCHv2 4/4] ath10k: add debugfs support to dump per sta tx stats
Date: Tue, 4 Sep 2018 12:15:16 +0530 [thread overview]
Message-ID: <1536043516-12462-5-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1536043516-12462-1-git-send-email-akolli@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
This patch adds 'tx_stats' in per station debugfs entry.
Use this command to dump tx_stats:
cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/
stations/<MACADDR>/tx_stats
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
V2:
- Fix kbuild, warning: the frame size of 1088 bytes is
larger than 1024 bytes [-Wframe-larger-than=]
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 101 +++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index a63c97e2c50c..929f2f66fdce 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -626,9 +626,105 @@ static ssize_t ath10k_dbg_sta_read_tid_stats(struct file *file,
.llseek = default_llseek,
};
+static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ieee80211_sta *sta = file->private_data;
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k *ar = arsta->arvif->ar;
+ struct ath10k_htt_data_stats *stats;
+ const char *str_name[ATH10K_STATS_TYPE_MAX] = {"succ", "fail",
+ "retry", "ampdu"};
+ const char *str[ATH10K_COUNTER_TYPE_MAX] = {"bytes", "packets"};
+ int len = 0, i, j, k, retval = 0;
+ const int size = 2 * 4096;
+ char *buf;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
+ for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
+ stats = &arsta->tx_stats->stats[k];
+ len += scnprintf(buf + len, size - len, "%s_%s\n",
+ str_name[k],
+ str[j]);
+ len += scnprintf(buf + len, size - len,
+ " VHT MCS %s\n",
+ str[j]);
+ for (i = 0; i < ATH10K_VHT_MCS_NUM; i++)
+ len += scnprintf(buf + len, size - len,
+ " %llu ",
+ stats->vht[j][i]);
+ len += scnprintf(buf + len, size - len, "\n");
+ len += scnprintf(buf + len, size - len, " HT MCS %s\n",
+ str[j]);
+ for (i = 0; i < ATH10K_HT_MCS_NUM; i++)
+ len += scnprintf(buf + len, size - len,
+ " %llu ", stats->ht[j][i]);
+ len += scnprintf(buf + len, size - len, "\n");
+ len += scnprintf(buf + len, size - len,
+ " BW %s (20,40,80,160 MHz)\n", str[j]);
+ len += scnprintf(buf + len, size - len,
+ " %llu %llu %llu %llu\n",
+ stats->bw[j][0], stats->bw[j][1],
+ stats->bw[j][2], stats->bw[j][3]);
+ len += scnprintf(buf + len, size - len,
+ " NSS %s (1x1,2x2,3x3,4x4)\n", str[j]);
+ len += scnprintf(buf + len, size - len,
+ " %llu %llu %llu %llu\n",
+ stats->nss[j][0], stats->nss[j][1],
+ stats->nss[j][2], stats->nss[j][3]);
+ len += scnprintf(buf + len, size - len,
+ " GI %s (LGI,SGI)\n",
+ str[j]);
+ len += scnprintf(buf + len, size - len, " %llu %llu\n",
+ stats->gi[j][0], stats->gi[j][1]);
+ len += scnprintf(buf + len, size - len,
+ " legacy rate %s (1,2 ... Mbps)\n ",
+ str[j]);
+ for (i = 0; i < ATH10K_LEGACY_NUM; i++)
+ len += scnprintf(buf + len, size - len, "%llu ",
+ stats->legacy[j][i]);
+ len += scnprintf(buf + len, size - len, "\n");
+ }
+ }
+
+ len += scnprintf(buf + len, size - len,
+ "\nTX duration\n %llu usecs\n",
+ arsta->tx_stats->tx_duration);
+ len += scnprintf(buf + len, size - len,
+ "BA fails\n %llu\n", arsta->tx_stats->ba_fails);
+ len += scnprintf(buf + len, size - len,
+ "ack fails\n %llu\n", arsta->tx_stats->ack_fails);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (len > size)
+ len = size;
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ mutex_unlock(&ar->conf_mutex);
+ return retval;
+}
+
+static const struct file_operations fops_tx_stats = {
+ .read = ath10k_dbg_sta_dump_tx_stats,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, struct dentry *dir)
{
+ struct ath10k *ar = hw->priv;
+
debugfs_create_file("aggr_mode", 0644, dir, sta, &fops_aggr_mode);
debugfs_create_file("addba", 0200, dir, sta, &fops_addba);
debugfs_create_file("addba_resp", 0200, dir, sta, &fops_addba_resp);
@@ -637,4 +733,9 @@ void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
&fops_peer_debug_trigger);
debugfs_create_file("dump_tid_stats", 0400, dir, sta,
&fops_tid_stats_dump);
+
+ if (ath10k_peer_stats_enabled(ar) &&
+ ath10k_debug_is_extd_tx_stats_enabled(ar))
+ debugfs_create_file("tx_stats", 0400, dir, sta,
+ &fops_tx_stats);
}
--
1.7.9.5
prev parent reply other threads:[~2018-09-04 11:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 6:45 [PATCHv2 0/4] Add support to dump tx stats histogram akolli
2018-09-04 6:45 ` [PATCHv2 1/4] ath10k: get the legacy rate index to update the txrate table akolli
2018-09-06 16:03 ` Kalle Valo
2018-09-04 6:45 ` [PATCHv2 2/4] ath10k: add debugfs entry to enable extended tx stats akolli
2018-09-04 6:45 ` [PATCHv2 3/4] ath10k: add extended per sta tx statistics support akolli
2018-09-04 6:45 ` akolli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536043516-12462-5-git-send-email-akolli@codeaurora.org \
--to=akolli@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).