linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jouni Malinen <jouni@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org,
	Ankita Bajaj <bankita@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH] nl80211: Add per peer statistics to compute FCS error rate
Date: Thu, 27 Sep 2018 18:01:57 +0300	[thread overview]
Message-ID: <1538060517-32208-1-git-send-email-jouni@codeaurora.org> (raw)

From: Ankita Bajaj <bankita@codeaurora.org>

Add support for drivers to report the total number of MPDUs received
and the number of MPDUs received with an FCS error from a specific
peer. These counters will be incremented only when the TA of the
frame matches the MAC address of the peer irrespective of FCS
error.

It should be noted that the TA field in the frame might be corrupted
when there is an FCS error and TA matching logic would fail in such
cases. Hence, FCS error counter might not be fully accurate, but it can
provide help in detecting bad RX links in significant number of cases.
This FCS error counter without full accuracy can be used, e.g., to
trigger a kick-out of a connected client with a bad link in AP mode to
force such a client to roam to another AP.

Signed-off-by: Ankita Bajaj <bankita@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 include/net/cfg80211.h       | 7 +++++++
 include/uapi/linux/nl80211.h | 8 ++++++++
 net/wireless/nl80211.c       | 2 ++
 3 files changed, 17 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9f3ed79..1fbb2d9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1292,6 +1292,10 @@ struct cfg80211_tid_stats {
  * @ack_signal: signal strength (in dBm) of the last ACK frame.
  * @avg_ack_signal: average rssi value of ack packet for the no of msdu's has
  *	been sent.
+ * @rx_mpdu_count: number of MPDUs received from this station
+ * @fcs_err_count: number of packets (MPDUs) received from this station with
+ *	an FCS error. This counter should be incremented only when TA of the
+ *	received packet with an FCS error matches the peer MAC address.
  */
 struct station_info {
 	u64 filled;
@@ -1338,6 +1342,9 @@ struct station_info {
 	struct cfg80211_tid_stats *pertid;
 	s8 ack_signal;
 	s8 avg_ack_signal;
+
+	u32 rx_mpdu_count;
+	u32 fcs_err_count;
 };
 
 #if IS_ENABLED(CONFIG_CFG80211)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index cfc9417..172f312 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3051,6 +3051,12 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
  * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
+ * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
+ *	(u32, from this station)
+ * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
+ *	with an FCS error (u32, from this station). This count may not include
+ *	some packets with an FCS error due to TA corruption. Hence this counter
+ *	might not be fully accurate.
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -3091,6 +3097,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_PAD,
 	NL80211_STA_INFO_ACK_SIGNAL,
 	NL80211_STA_INFO_ACK_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_MPDUS,
+	NL80211_STA_INFO_FCS_ERROR_COUNT,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0827cbd..3151171 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4719,6 +4719,8 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid,
 	PUT_SINFO_U64(RX_DROP_MISC, rx_dropped_misc);
 	PUT_SINFO_U64(BEACON_RX, rx_beacon);
 	PUT_SINFO(BEACON_SIGNAL_AVG, rx_beacon_signal_avg, u8);
+	PUT_SINFO(RX_MPDUS, rx_mpdu_count, u32);
+	PUT_SINFO(FCS_ERROR_COUNT, fcs_err_count, u32);
 	if (wiphy_ext_feature_isset(&rdev->wiphy,
 				    NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT)) {
 		PUT_SINFO(ACK_SIGNAL, ack_signal, u8);
-- 
2.7.4


             reply	other threads:[~2018-09-27 15:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-27 15:01 Jouni Malinen [this message]
2018-10-01 10:19 ` [PATCH] nl80211: Add per peer statistics to compute FCS error rate Johannes Berg
2018-10-04 17:32   ` bankita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538060517-32208-1-git-send-email-jouni@codeaurora.org \
    --to=jouni@codeaurora.org \
    --cc=bankita@codeaurora.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).