From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Alexei Avshalom Lazar <ailizaro@codeaurora.org>,
linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
Maya Erez <merez@codeaurora.org>
Subject: [PATCH 11/12] wil6210: align to latest auto generated wmi.h
Date: Sun, 2 Dec 2018 11:43:36 +0200 [thread overview]
Message-ID: <1543743817-10298-12-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1543743817-10298-1-git-send-email-merez@codeaurora.org>
From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/wmi.c | 7 +++++
drivers/net/wireless/ath/wil6210/wmi.h | 48 +++++++++++++++++++++++++++++++++-
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 509a255..88269e3 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2954,6 +2954,10 @@ static const char *suspend_status2name(u8 status)
switch (status) {
case WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE:
return "LINK_NOT_IDLE";
+ case WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT:
+ return "DISCONNECT";
+ case WMI_TRAFFIC_SUSPEND_REJECTED_OTHER:
+ return "OTHER";
default:
return "Untracked status";
}
@@ -3043,6 +3047,9 @@ static void resume_triggers2string(u32 triggers, char *string, int str_size)
if (triggers & WMI_RESUME_TRIGGER_WMI_EVT)
strlcat(string, " WMI_EVT", str_size);
+
+ if (triggers & WMI_RESUME_TRIGGER_DISCONNECT)
+ strlcat(string, " DISCONNECT", str_size);
}
int wmi_resume(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index b668758..cce5270 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -1982,6 +1982,7 @@ enum wmi_event_id {
WMI_BEAMFORMING_MGMT_DONE_EVENTID = 0x1836,
WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_BF_TRIG_EVENTID = 0x183A,
WMI_RS_MGMT_DONE_EVENTID = 0x1852,
WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
@@ -2267,7 +2268,9 @@ struct wmi_notify_req_done_event {
__le32 status;
__le64 tsf;
s8 rssi;
- u8 reserved0[3];
+ /* enum wmi_edmg_tx_mode */
+ u8 tx_mode;
+ u8 reserved0[2];
__le32 tx_tpt;
__le32 tx_goodput;
__le32 rx_goodput;
@@ -3168,6 +3171,30 @@ struct wmi_brp_set_ant_limit_event {
u8 reserved[3];
} __packed;
+enum wmi_bf_type {
+ WMI_BF_TYPE_SLS = 0x00,
+ WMI_BF_TYPE_BRP_RX = 0x01,
+};
+
+/* WMI_BF_TRIG_CMDID */
+struct wmi_bf_trig_cmd {
+ /* enum wmi_bf_type - type of requested beamforming */
+ u8 bf_type;
+ /* used only for WMI_BF_TYPE_BRP_RX */
+ u8 cid;
+ /* used only for WMI_BF_TYPE_SLS */
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 reserved[4];
+} __packed;
+
+/* WMI_BF_TRIG_EVENTID */
+struct wmi_bf_trig_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 cid;
+ u8 reserved[2];
+} __packed;
+
/* broadcast connection ID */
#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
@@ -3263,6 +3290,8 @@ struct wmi_link_maintain_cfg_read_done_event {
enum wmi_traffic_suspend_status {
WMI_TRAFFIC_SUSPEND_APPROVED = 0x0,
WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE = 0x1,
+ WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT = 0x2,
+ WMI_TRAFFIC_SUSPEND_REJECTED_OTHER = 0x3,
};
/* WMI_TRAFFIC_SUSPEND_EVENTID */
@@ -3282,6 +3311,7 @@ enum wmi_resume_trigger {
WMI_RESUME_TRIGGER_UCAST_RX = 0x2,
WMI_RESUME_TRIGGER_BCAST_RX = 0x4,
WMI_RESUME_TRIGGER_WMI_EVT = 0x8,
+ WMI_RESUME_TRIGGER_DISCONNECT = 0x10,
};
/* WMI_TRAFFIC_RESUME_EVENTID */
@@ -4057,4 +4087,20 @@ struct wmi_set_vring_priority_event {
u8 reserved[3];
} __packed;
+/* WMI_RADAR_PCI_CTRL_BLOCK struct */
+struct wmi_radar_pci_ctrl_block {
+ /* last fw tail address index */
+ __le32 fw_tail_index;
+ /* last SW head address index known to FW */
+ __le32 sw_head_index;
+ __le32 last_wr_pulse_tsf_low;
+ __le32 last_wr_pulse_count;
+ __le32 last_wr_in_bytes;
+ __le32 last_wr_pulse_id;
+ __le32 last_wr_burst_id;
+ /* When pre overflow detected, advance sw head in unit of pulses */
+ __le32 sw_head_inc;
+ __le32 reserved[8];
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.9.1
next prev parent reply other threads:[~2018-12-02 9:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 9:43 [PATCH 00/12] wil6210 patches Maya Erez
2018-12-02 9:43 ` [PATCH 01/12] wil6210: remove rtap_include_phy_info module param Maya Erez
2018-12-02 9:43 ` [PATCH 02/12] wil6210: use platform specific configuration Maya Erez
2018-12-02 9:43 ` [PATCH 03/12] wil6210: support ndo_select_queue in net_device_ops Maya Erez
2018-12-02 9:43 ` [PATCH 04/12] wil6210: add support for AC queues per station Maya Erez
2018-12-02 9:43 ` [PATCH 05/12] wil6210: add option to drop Tx packets when tx ring is full Maya Erez
2018-12-02 9:43 ` [PATCH 06/12] wil6210: support up to 20 stations in AP mode Maya Erez
2018-12-02 9:43 ` [PATCH 07/12] wil6210: accessing 802.3 addresses via utility functions Maya Erez
2018-12-02 9:43 ` [PATCH 08/12] wil6210: fix invalid sta statistics update Maya Erez
2018-12-02 9:43 ` [PATCH 09/12] wil6210: ignore HALP ICR if already handled Maya Erez
2018-12-02 9:43 ` [PATCH 10/12] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Maya Erez
2018-12-02 9:43 ` Maya Erez [this message]
2018-12-02 9:43 ` [PATCH 12/12] wil6210: prevent device memory access while in reset or suspend Maya Erez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1543743817-10298-12-git-send-email-merez@codeaurora.org \
--to=merez@codeaurora.org \
--cc=ailizaro@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).