linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Maya Erez <merez@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com
Subject: [PATCH 06/21] wil6210: ignore HALP ICR if already handled
Date: Fri, 22 Feb 2019 16:21:04 +0200	[thread overview]
Message-ID: <1550845279-16103-7-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1550845279-16103-1-git-send-email-merez@codeaurora.org>

HALP ICR is set as long as the FW should stay awake.
To prevent its multiple handling the driver masks this IRQ bit.
However, if there is a different MISC ICR before the driver clears
this bit, there is a risk of race condition between HALP mask and
unmask. This race leads to HALP timeout, in case it is mistakenly
masked.
Add an atomic flag to indicate if HALP ICR should be handled.

Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 12 ++++++++----
 drivers/net/wireless/ath/wil6210/main.c      |  3 +++
 drivers/net/wireless/ath/wil6210/wil6210.h   |  1 +
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 5d287a8..3f5bd17 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -575,10 +575,14 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
 	}
 
 	if (isr & BIT_DMA_EP_MISC_ICR_HALP) {
-		wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
-		wil6210_mask_halp(wil);
 		isr &= ~BIT_DMA_EP_MISC_ICR_HALP;
-		complete(&wil->halp.comp);
+		if (wil->halp.handle_icr) {
+			/* no need to handle HALP ICRs until next vote */
+			wil->halp.handle_icr = false;
+			wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
+			wil6210_mask_halp(wil);
+			complete(&wil->halp.comp);
+		}
 	}
 
 	wil->isr_misc = isr;
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 10de16a..277abfd 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1919,11 +1919,14 @@ void wil_halp_vote(struct wil6210_priv *wil)
 
 	if (++wil->halp.ref_cnt == 1) {
 		reinit_completion(&wil->halp.comp);
+		/* mark to IRQ context to handle HALP ICR */
+		wil->halp.handle_icr = true;
 		wil6210_set_halp(wil);
 		rc = wait_for_completion_timeout(&wil->halp.comp, to_jiffies);
 		if (!rc) {
 			wil_err(wil, "HALP vote timed out\n");
 			/* Mask HALP as done in case the interrupt is raised */
+			wil->halp.handle_icr = false;
 			wil6210_mask_halp(wil);
 		} else {
 			wil_dbg_irq(wil,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 85dca1b..e1b1039b 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -794,6 +794,7 @@ struct wil_halp {
 	struct mutex		lock; /* protect halp ref_cnt */
 	unsigned int		ref_cnt;
 	struct completion	comp;
+	u8			handle_icr;
 };
 
 struct wil_blob_wrapper {
-- 
1.9.1


  parent reply	other threads:[~2019-02-22 14:21 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22 14:20 [PATCH 00/21] wil6210 patches Maya Erez
2019-02-22 14:20 ` [PATCH 01/21] wil6210: remove rtap_include_phy_info module param Maya Erez
2019-02-28  9:25   ` Kalle Valo
2019-02-22 14:21 ` [PATCH 02/21] wil6210: add option to drop Tx packets when Tx ring is full Maya Erez
2019-02-22 14:21 ` [PATCH 03/21] wil6210: support up to 20 stations in AP mode Maya Erez
2019-02-28  9:17   ` Kalle Valo
2019-02-28 10:36     ` merez
2019-02-22 14:21 ` [PATCH 04/21] wil6210: accessing 802.3 addresses via utility functions Maya Erez
2019-02-22 14:21 ` [PATCH 05/21] wil6210: fix invalid sta statistics update Maya Erez
2019-02-22 14:21 ` Maya Erez [this message]
2019-02-22 14:21 ` [PATCH 07/21] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Maya Erez
2019-02-22 14:21 ` [PATCH 08/21] wil6210: align to latest auto generated wmi.h Maya Erez
2019-04-03 12:43   ` Kalle Valo
2019-02-22 14:21 ` [PATCH 09/21] wil6210: prevent device memory access while in reset or suspend Maya Erez
2019-02-22 14:21 ` [PATCH 10/21] wil6210: increase PCP stop command timeout Maya Erez
2019-02-22 14:21 ` [PATCH 11/21] wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB Maya Erez
2019-02-22 14:21 ` [PATCH 12/21] wil6210: update WIL_MCS_MAX to 15 Maya Erez
2019-02-22 14:21 ` [PATCH 13/21] wil6210: check mid is valid Maya Erez
2019-02-22 14:21 ` [PATCH 14/21] wil6210: use OEM MAC address from OTP Maya Erez
2019-02-22 14:21 ` [PATCH 15/21] wil6210: free edma_rx_swtail upon reset Maya Erez
2019-02-22 14:21 ` [PATCH 16/21] wil6210: fix report of rx packet checksum in edma mode Maya Erez
2019-04-03 12:46   ` Kalle Valo
2019-02-22 14:21 ` [PATCH 17/21] wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext Maya Erez
2019-02-22 14:21 ` [PATCH 18/21] wil6210: prevent access to RGF_CAF_ICR in Talyn Maya Erez
2019-02-22 14:21 ` [PATCH 19/21] wil6210: add support for ucode tracing Maya Erez
2019-02-22 14:21 ` [PATCH 20/21] wil6210: reset buff id in status message after completion Maya Erez
2019-02-22 14:21 ` [PATCH 21/21] wil6210: print error in FW and board files load failures Maya Erez
2019-02-28  9:05 ` [PATCH 00/21] wil6210 patches Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1550845279-16103-7-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).