linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Alexei Avshalom Lazar <ailizaro@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
	Maya Erez <merez@codeaurora.org>
Subject: [PATCH 08/21] wil6210: align to latest auto generated wmi.h
Date: Fri, 22 Feb 2019 16:21:06 +0200	[thread overview]
Message-ID: <1550845279-16103-9-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1550845279-16103-1-git-send-email-merez@codeaurora.org>

From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>

Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c |  7 +++
 drivers/net/wireless/ath/wil6210/wmi.h | 91 ++++++++++++++++++++++++++++++++--
 2 files changed, 94 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index bda4a97..c737a79e 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2957,6 +2957,10 @@ static const char *suspend_status2name(u8 status)
 	switch (status) {
 	case WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE:
 		return "LINK_NOT_IDLE";
+	case WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT:
+		return "DISCONNECT";
+	case WMI_TRAFFIC_SUSPEND_REJECTED_OTHER:
+		return "OTHER";
 	default:
 		return "Untracked status";
 	}
@@ -3046,6 +3050,9 @@ static void resume_triggers2string(u32 triggers, char *string, int str_size)
 
 	if (triggers & WMI_RESUME_TRIGGER_WMI_EVT)
 		strlcat(string, " WMI_EVT", str_size);
+
+	if (triggers & WMI_RESUME_TRIGGER_DISCONNECT)
+		strlcat(string, " DISCONNECT", str_size);
 }
 
 int wmi_resume(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index b668758..da46fc8 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
  * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
  * Copyright (c) 2006-2012 Wilocity
  *
@@ -104,6 +104,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_RAW_MODE			= 24,
 	WMI_FW_CAPABILITY_TX_REQ_EXT			= 25,
 	WMI_FW_CAPABILITY_CHANNEL_4			= 26,
+	WMI_FW_CAPABILITY_IPA				= 27,
 	WMI_FW_CAPABILITY_MAX,
 };
 
@@ -294,6 +295,7 @@ enum wmi_command_id {
 	WMI_SET_AP_SLOT_SIZE_CMDID			= 0xA0F,
 	WMI_SET_VRING_PRIORITY_WEIGHT_CMDID		= 0xA10,
 	WMI_SET_VRING_PRIORITY_CMDID			= 0xA11,
+	WMI_RBUFCAP_CFG_CMDID				= 0xA12,
 	WMI_SET_MAC_ADDRESS_CMDID			= 0xF003,
 	WMI_ABORT_SCAN_CMDID				= 0xF007,
 	WMI_SET_PROMISCUOUS_MODE_CMDID			= 0xF041,
@@ -979,10 +981,22 @@ enum wmi_rx_msg_type {
 	WMI_RX_MSG_TYPE_EXTENDED	= 0x01,
 };
 
+enum wmi_ring_add_irq_mode {
+	/* Backwards compatibility
+	 *  for DESC ring - interrupt disabled
+	 *  for STATUS ring - interrupt enabled
+	 */
+	WMI_RING_ADD_IRQ_MODE_BWC	= 0x00,
+	WMI_RING_ADD_IRQ_MODE_DISABLE	= 0x01,
+	WMI_RING_ADD_IRQ_MODE_ENABLE	= 0x02,
+};
+
 struct wmi_tx_status_ring_add_cmd {
 	struct wmi_edma_ring_cfg ring_cfg;
 	u8 irq_index;
-	u8 reserved[3];
+	/* wmi_ring_add_irq_mode */
+	u8 irq_mode;
+	u8 reserved[2];
 } __packed;
 
 struct wmi_rx_status_ring_add_cmd {
@@ -1016,7 +1030,10 @@ struct wmi_tx_desc_ring_add_cmd {
 	u8 mac_ctrl;
 	u8 to_resolution;
 	u8 agg_max_wsize;
-	u8 reserved[3];
+	u8 irq_index;
+	/* wmi_ring_add_irq_mode */
+	u8 irq_mode;
+	u8 reserved;
 	struct wmi_vring_cfg_schd schd_params;
 } __packed;
 
@@ -1982,6 +1999,7 @@ enum wmi_event_id {
 	WMI_BEAMFORMING_MGMT_DONE_EVENTID		= 0x1836,
 	WMI_BF_TXSS_MGMT_DONE_EVENTID			= 0x1837,
 	WMI_BF_RXSS_MGMT_DONE_EVENTID			= 0x1839,
+	WMI_BF_TRIG_EVENTID				= 0x183A,
 	WMI_RS_MGMT_DONE_EVENTID			= 0x1852,
 	WMI_RF_MGMT_STATUS_EVENTID			= 0x1853,
 	WMI_BF_SM_MGMT_DONE_EVENTID			= 0x1838,
@@ -2082,6 +2100,7 @@ enum wmi_event_id {
 	WMI_SET_AP_SLOT_SIZE_EVENTID			= 0x1A0F,
 	WMI_SET_VRING_PRIORITY_WEIGHT_EVENTID		= 0x1A10,
 	WMI_SET_VRING_PRIORITY_EVENTID			= 0x1A11,
+	WMI_RBUFCAP_CFG_EVENTID				= 0x1A12,
 	WMI_SET_CHANNEL_EVENTID				= 0x9000,
 	WMI_ASSOC_REQ_EVENTID				= 0x9001,
 	WMI_EAPOL_RX_EVENTID				= 0x9002,
@@ -2267,7 +2286,9 @@ struct wmi_notify_req_done_event {
 	__le32 status;
 	__le64 tsf;
 	s8 rssi;
-	u8 reserved0[3];
+	/* enum wmi_edmg_tx_mode */
+	u8 tx_mode;
+	u8 reserved0[2];
 	__le32 tx_tpt;
 	__le32 tx_goodput;
 	__le32 rx_goodput;
@@ -2316,6 +2337,7 @@ enum wmi_disconnect_reason {
 	WMI_DIS_REASON_PROFILE_MISMATCH		= 0x0C,
 	WMI_DIS_REASON_CONNECTION_EVICTED	= 0x0D,
 	WMI_DIS_REASON_IBSS_MERGE		= 0x0E,
+	WMI_DIS_REASON_HIGH_TEMPERATURE		= 0x0F,
 };
 
 /* WMI_DISCONNECT_EVENTID */
@@ -3168,6 +3190,30 @@ struct wmi_brp_set_ant_limit_event {
 	u8 reserved[3];
 } __packed;
 
+enum wmi_bf_type {
+	WMI_BF_TYPE_SLS		= 0x00,
+	WMI_BF_TYPE_BRP_RX	= 0x01,
+};
+
+/* WMI_BF_TRIG_CMDID */
+struct wmi_bf_trig_cmd {
+	/* enum wmi_bf_type - type of requested beamforming */
+	u8 bf_type;
+	/* used only for WMI_BF_TYPE_BRP_RX */
+	u8 cid;
+	/* used only for WMI_BF_TYPE_SLS */
+	u8 dst_mac[WMI_MAC_LEN];
+	u8 reserved[4];
+} __packed;
+
+/* WMI_BF_TRIG_EVENTID */
+struct wmi_bf_trig_event {
+	/* enum wmi_fw_status */
+	u8 status;
+	u8 cid;
+	u8 reserved[2];
+} __packed;
+
 /* broadcast connection ID */
 #define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST	(0xFFFFFFFF)
 
@@ -3263,6 +3309,8 @@ struct wmi_link_maintain_cfg_read_done_event {
 enum wmi_traffic_suspend_status {
 	WMI_TRAFFIC_SUSPEND_APPROVED			= 0x0,
 	WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE	= 0x1,
+	WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT		= 0x2,
+	WMI_TRAFFIC_SUSPEND_REJECTED_OTHER		= 0x3,
 };
 
 /* WMI_TRAFFIC_SUSPEND_EVENTID */
@@ -3282,6 +3330,7 @@ enum wmi_resume_trigger {
 	WMI_RESUME_TRIGGER_UCAST_RX	= 0x2,
 	WMI_RESUME_TRIGGER_BCAST_RX	= 0x4,
 	WMI_RESUME_TRIGGER_WMI_EVT	= 0x8,
+	WMI_RESUME_TRIGGER_DISCONNECT	= 0x10,
 };
 
 /* WMI_TRAFFIC_RESUME_EVENTID */
@@ -4057,4 +4106,38 @@ struct wmi_set_vring_priority_event {
 	u8 reserved[3];
 } __packed;
 
+/* WMI_RADAR_PCI_CTRL_BLOCK struct */
+struct wmi_radar_pci_ctrl_block {
+	/* last fw tail address index */
+	__le32 fw_tail_index;
+	/* last SW head address index known to FW */
+	__le32 sw_head_index;
+	__le32 last_wr_pulse_tsf_low;
+	__le32 last_wr_pulse_count;
+	__le32 last_wr_in_bytes;
+	__le32 last_wr_pulse_id;
+	__le32 last_wr_burst_id;
+	/* When pre overflow detected, advance sw head in unit of pulses */
+	__le32 sw_head_inc;
+	__le32 reserved[8];
+} __packed;
+
+/* WMI_RBUFCAP_CFG_CMD */
+struct wmi_rbufcap_cfg_cmd {
+	u8 enable;
+	u8 reserved;
+	/* RBUFCAP indicates rx space unavailable when number of rx
+	 * descriptors drops below this threshold. Set 0 to use system
+	 * default
+	 */
+	__le16 rx_desc_threshold;
+} __packed;
+
+/* WMI_RBUFCAP_CFG_EVENTID */
+struct wmi_rbufcap_cfg_event {
+	/* enum wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
 #endif /* __WILOCITY_WMI_H__ */
-- 
1.9.1


  parent reply	other threads:[~2019-02-22 14:21 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22 14:20 [PATCH 00/21] wil6210 patches Maya Erez
2019-02-22 14:20 ` [PATCH 01/21] wil6210: remove rtap_include_phy_info module param Maya Erez
2019-02-28  9:25   ` Kalle Valo
2019-02-22 14:21 ` [PATCH 02/21] wil6210: add option to drop Tx packets when Tx ring is full Maya Erez
2019-02-22 14:21 ` [PATCH 03/21] wil6210: support up to 20 stations in AP mode Maya Erez
2019-02-28  9:17   ` Kalle Valo
2019-02-28 10:36     ` merez
2019-02-22 14:21 ` [PATCH 04/21] wil6210: accessing 802.3 addresses via utility functions Maya Erez
2019-02-22 14:21 ` [PATCH 05/21] wil6210: fix invalid sta statistics update Maya Erez
2019-02-22 14:21 ` [PATCH 06/21] wil6210: ignore HALP ICR if already handled Maya Erez
2019-02-22 14:21 ` [PATCH 07/21] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Maya Erez
2019-02-22 14:21 ` Maya Erez [this message]
2019-04-03 12:43   ` [PATCH 08/21] wil6210: align to latest auto generated wmi.h Kalle Valo
2019-02-22 14:21 ` [PATCH 09/21] wil6210: prevent device memory access while in reset or suspend Maya Erez
2019-02-22 14:21 ` [PATCH 10/21] wil6210: increase PCP stop command timeout Maya Erez
2019-02-22 14:21 ` [PATCH 11/21] wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB Maya Erez
2019-02-22 14:21 ` [PATCH 12/21] wil6210: update WIL_MCS_MAX to 15 Maya Erez
2019-02-22 14:21 ` [PATCH 13/21] wil6210: check mid is valid Maya Erez
2019-02-22 14:21 ` [PATCH 14/21] wil6210: use OEM MAC address from OTP Maya Erez
2019-02-22 14:21 ` [PATCH 15/21] wil6210: free edma_rx_swtail upon reset Maya Erez
2019-02-22 14:21 ` [PATCH 16/21] wil6210: fix report of rx packet checksum in edma mode Maya Erez
2019-04-03 12:46   ` Kalle Valo
2019-02-22 14:21 ` [PATCH 17/21] wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext Maya Erez
2019-02-22 14:21 ` [PATCH 18/21] wil6210: prevent access to RGF_CAF_ICR in Talyn Maya Erez
2019-02-22 14:21 ` [PATCH 19/21] wil6210: add support for ucode tracing Maya Erez
2019-02-22 14:21 ` [PATCH 20/21] wil6210: reset buff id in status message after completion Maya Erez
2019-02-22 14:21 ` [PATCH 21/21] wil6210: print error in FW and board files load failures Maya Erez
2019-02-28  9:05 ` [PATCH 00/21] wil6210 patches Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1550845279-16103-9-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=ailizaro@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).