From: Venkateswara Naralasetty <vnaralas@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Venkateswara Naralasetty <vnaralas@codeaurora.org>,
Kan Yan <kyan@chromium.org>
Subject: [PATCHv2] ath10k: Add wrapper function to ath10k debug
Date: Fri, 26 Apr 2019 18:28:25 +0530 [thread overview]
Message-ID: <1556283505-29539-1-git-send-email-vnaralas@codeaurora.org> (raw)
ath10k_dbg() is called in ath10k_process_rx() with huge set of arguments
which is causing CPU overhead even when debug_mask is not set.
Good improvement was observed in the receive side performance when call
to ath10k_dbg() is avoided in the RX path.
Since currently all debug messages are sent via tracing infrastructure,
we cannot entirely avoid calling ath10k_dbg. Therefore, call to
ath10k_dbg() is made conditional based on tracing config in the driver.
Trasmit performance remains unchanged with this patch; below are some
experimental results with this patch and tracing disabled.
mesh mode:
w/o this patch with this patch
Traffic TP CPU Usage TP CPU usage
TCP 840Mbps 76.53% 960Mbps 78.14%
UDP 1030Mbps 74.58% 1132Mbps 74.31%
Infra mode:
w/o this patch with this patch
Traffic TP CPU Usage TP CPU usage
TCP Rx 1241Mbps 80.89% 1270Mbps 73.50%
UDP Rx 1433Mbps 81.77% 1472Mbps 72.80%
Tested platform : IPQ8064
hardware used : QCA9984
firmware ver : ver 10.4-3.5.3-00057
Signed-off-by: Kan Yan <kyan@chromium.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
---
v2:
* changed trace enabled check from IS_ENABLED(CONFIG_ATH10K_TRACING)
* to trace_ath10k_log_dbg_enabled().
drivers/net/wireless/ath/ath10k/core.c | 2 ++
drivers/net/wireless/ath/ath10k/debug.c | 8 ++++----
drivers/net/wireless/ath/ath10k/debug.h | 22 ++++++++++++++++------
drivers/net/wireless/ath/ath10k/trace.c | 1 +
drivers/net/wireless/ath/ath10k/trace.h | 6 +++++-
5 files changed, 28 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index cfd7bb2..ab709bf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -26,6 +26,8 @@
#include "coredump.h"
unsigned int ath10k_debug_mask;
+EXPORT_SYMBOL(ath10k_debug_mask);
+
static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 32d967a..1b63929 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2620,8 +2620,8 @@ void ath10k_debug_unregister(struct ath10k *ar)
#endif /* CONFIG_ATH10K_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
-void ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
- const char *fmt, ...)
+void __ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
+ const char *fmt, ...)
{
struct va_format vaf;
va_list args;
@@ -2638,7 +2638,7 @@ void ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
va_end(args);
}
-EXPORT_SYMBOL(ath10k_dbg);
+EXPORT_SYMBOL(__ath10k_dbg);
void ath10k_dbg_dump(struct ath10k *ar,
enum ath10k_debug_mask mask,
@@ -2651,7 +2651,7 @@ void ath10k_dbg_dump(struct ath10k *ar,
if (ath10k_debug_mask & mask) {
if (msg)
- ath10k_dbg(ar, mask, "%s\n", msg);
+ __ath10k_dbg(ar, mask, "%s\n", msg);
for (ptr = buf; (ptr - buf) < len; ptr += 16) {
linebuflen = 0;
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index db78e85..a5b2039 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -240,18 +240,18 @@ void ath10k_sta_update_rx_tid_stats_ampdu(struct ath10k *ar,
#endif /* CONFIG_MAC80211_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
-__printf(3, 4) void ath10k_dbg(struct ath10k *ar,
- enum ath10k_debug_mask mask,
- const char *fmt, ...);
+__printf(3, 4) void __ath10k_dbg(struct ath10k *ar,
+ enum ath10k_debug_mask mask,
+ const char *fmt, ...);
void ath10k_dbg_dump(struct ath10k *ar,
enum ath10k_debug_mask mask,
const char *msg, const char *prefix,
const void *buf, size_t len);
#else /* CONFIG_ATH10K_DEBUG */
-static inline int ath10k_dbg(struct ath10k *ar,
- enum ath10k_debug_mask dbg_mask,
- const char *fmt, ...)
+static inline int __ath10k_dbg(struct ath10k *ar,
+ enum ath10k_debug_mask dbg_mask,
+ const char *fmt, ...)
{
return 0;
}
@@ -263,4 +263,14 @@ static inline void ath10k_dbg_dump(struct ath10k *ar,
{
}
#endif /* CONFIG_ATH10K_DEBUG */
+
+/* Avoid calling __ath10k_dbg() if debug_mask is not set and tracing
+ * disabled.
+ */
+#define ath10k_dbg(ar, dbg_mask, fmt, ...) \
+do { \
+ if ((ath10k_debug_mask & dbg_mask) || \
+ trace_ath10k_log_dbg_enabled()) \
+ __ath10k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \
+} while (0)
#endif /* _DEBUG_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/trace.c b/drivers/net/wireless/ath/ath10k/trace.c
index 3ecdff1..c7d4c97 100644
--- a/drivers/net/wireless/ath/ath10k/trace.c
+++ b/drivers/net/wireless/ath/ath10k/trace.c
@@ -7,3 +7,4 @@
#define CREATE_TRACE_POINTS
#include "trace.h"
+EXPORT_SYMBOL(__tracepoint_ath10k_log_dbg);
diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
index ba977bb..ab91645 100644
--- a/drivers/net/wireless/ath/ath10k/trace.h
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -29,7 +29,11 @@ static inline u32 ath10k_frm_hdr_len(const void *buf, size_t len)
#if !defined(CONFIG_ATH10K_TRACING)
#undef TRACE_EVENT
#define TRACE_EVENT(name, proto, ...) \
-static inline void trace_ ## name(proto) {}
+static inline void trace_ ## name(proto) {} \
+static inline bool trace_##name##_enabled(void) \
+{ \
+ return false; \
+}
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(...)
#undef DEFINE_EVENT
--
2.7.4
next reply other threads:[~2019-04-26 13:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 12:58 Venkateswara Naralasetty [this message]
2019-04-26 13:21 ` [PATCHv2] ath10k: Add wrapper function to ath10k debug Ben Greear
2019-04-26 13:38 ` Venkateswara Naralasetty
2019-04-26 13:57 ` Ben Greear
2019-04-26 13:44 ` Michał Kazior
2019-04-26 13:56 ` Ben Greear
2019-04-30 6:13 ` Venkateswara Naralasetty
2019-05-09 12:48 ` Venkateswara Naralasetty
2019-06-25 12:49 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556283505-29539-1-git-send-email-vnaralas@codeaurora.org \
--to=vnaralas@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=kyan@chromium.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox