From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Ahmad Masri <amasri@codeaurora.org>,
linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
Maya Erez <merez@codeaurora.org>
Subject: [PATCH 10/11] wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeout
Date: Sun, 16 Jun 2019 10:26:06 +0300 [thread overview]
Message-ID: <1560669967-23706-11-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1560669967-23706-1-git-send-email-merez@codeaurora.org>
From: Ahmad Masri <amasri@codeaurora.org>
Replace all wmi_call timeouts that are less than 100 msec to use
WIL_WMI_CALL_GENERAL_TO_MS (100 msec) as a default. Some of the
current wmi_call timeouts are too short and fails to receive its
waiting events.
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 3 ++-
drivers/net/wireless/ath/wil6210/debugfs.c | 2 +-
drivers/net/wireless/ath/wil6210/txrx.c | 9 +++++---
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 32 +++++++++++++++++------------
5 files changed, 29 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index cd41a0b..52ae3d9 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -314,7 +314,8 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
memset(&reply, 0, sizeof(reply));
rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, vif->mid, &cmd, sizeof(cmd),
- WMI_NOTIFY_REQ_DONE_EVENTID, &reply, sizeof(reply), 20);
+ WMI_NOTIFY_REQ_DONE_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index bbe274c..4d0c867 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1334,7 +1334,7 @@ static int bf_show(struct seq_file *s, void *data)
rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, vif->mid,
&cmd, sizeof(cmd),
WMI_NOTIFY_REQ_DONE_EVENTID, &reply,
- sizeof(reply), 20);
+ sizeof(reply), WIL_WMI_CALL_GENERAL_TO_MS);
/* if reply is all-0, ignore this CID */
if (rc || is_all_zeros(&reply.evt, sizeof(reply.evt)))
continue;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 8790e5e..eae00aa 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1037,7 +1037,8 @@ static int wil_vring_init_tx(struct wil6210_vif *vif, int id, int size,
if (!vif->privacy)
txdata->dot1x_open = true;
rc = wmi_call(wil, WMI_VRING_CFG_CMDID, vif->mid, &cmd, sizeof(cmd),
- WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
goto out_free;
@@ -1125,7 +1126,8 @@ static int wil_tx_vring_modify(struct wil6210_vif *vif, int ring_id, int cid,
cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
rc = wmi_call(wil, WMI_VRING_CFG_CMDID, vif->mid, &cmd, sizeof(cmd),
- WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
goto fail;
@@ -1205,7 +1207,8 @@ int wil_vring_init_bcast(struct wil6210_vif *vif, int id, int size)
txdata->dot1x_open = true;
rc = wmi_call(wil, WMI_BCAST_VRING_CFG_CMDID, vif->mid,
&cmd, sizeof(cmd),
- WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
goto out_free;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 038329b..6f456b3 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -99,6 +99,7 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
#define WIL_MAX_AMPDU_SIZE_128 (128 * 1024) /* FW/HW limit */
#define WIL_MAX_AGG_WSIZE_64 (64) /* FW/HW limit */
#define WIL6210_MAX_STATUS_RINGS (8)
+#define WIL_WMI_CALL_GENERAL_TO_MS 100
/* Hardware offload block adds the following:
* 26 bytes - 3-address QoS data header
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 5d7eb52..542ef15 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -40,7 +40,6 @@
" 60G device led enablement. Set the led ID (0-2) to enable");
#define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200
-#define WIL_WMI_CALL_GENERAL_TO_MS 100
#define WIL_WMI_PCP_STOP_TO_MS 5000
/**
@@ -2059,7 +2058,8 @@ int wmi_echo(struct wil6210_priv *wil)
};
return wmi_call(wil, WMI_ECHO_CMDID, vif->mid, &cmd, sizeof(cmd),
- WMI_ECHO_RSP_EVENTID, NULL, 0, 50);
+ WMI_ECHO_RSP_EVENTID, NULL, 0,
+ WIL_WMI_CALL_GENERAL_TO_MS);
}
int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
@@ -2118,7 +2118,7 @@ int wmi_led_cfg(struct wil6210_priv *wil, bool enable)
rc = wmi_call(wil, WMI_LED_CFG_CMDID, vif->mid, &cmd, sizeof(cmd),
WMI_LED_CFG_DONE_EVENTID, &reply, sizeof(reply),
- 100);
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
goto out;
@@ -2267,7 +2267,8 @@ int wmi_get_ssid(struct wil6210_vif *vif, u8 *ssid_len, void *ssid)
memset(&reply, 0, sizeof(reply));
rc = wmi_call(wil, WMI_GET_SSID_CMDID, vif->mid, NULL, 0,
- WMI_GET_SSID_EVENTID, &reply, sizeof(reply), 20);
+ WMI_GET_SSID_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2304,7 +2305,8 @@ int wmi_get_channel(struct wil6210_priv *wil, int *channel)
memset(&reply, 0, sizeof(reply));
rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, vif->mid, NULL, 0,
- WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20);
+ WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2400,7 +2402,8 @@ int wmi_stop_discovery(struct wil6210_vif *vif)
wil_dbg_wmi(wil, "sending WMI_DISCOVERY_STOP_CMDID\n");
rc = wmi_call(wil, WMI_DISCOVERY_STOP_CMDID, vif->mid, NULL, 0,
- WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0, 100);
+ WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0,
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
wil_err(wil, "Failed to stop discovery\n");
@@ -2546,12 +2549,14 @@ int wmi_rxon(struct wil6210_priv *wil, bool on)
if (on) {
rc = wmi_call(wil, WMI_START_LISTEN_CMDID, vif->mid, NULL, 0,
WMI_LISTEN_STARTED_EVENTID,
- &reply, sizeof(reply), 100);
+ &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if ((rc == 0) && (reply.evt.status != WMI_FW_STATUS_SUCCESS))
rc = -EINVAL;
} else {
rc = wmi_call(wil, WMI_DISCOVERY_STOP_CMDID, vif->mid, NULL, 0,
- WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0, 20);
+ WMI_DISCOVERY_STOPPED_EVENTID, NULL, 0,
+ WIL_WMI_CALL_GENERAL_TO_MS);
}
return rc;
@@ -2640,7 +2645,8 @@ int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_bb, u32 *t_rf)
memset(&reply, 0, sizeof(reply));
rc = wmi_call(wil, WMI_TEMP_SENSE_CMDID, vif->mid, &cmd, sizeof(cmd),
- WMI_TEMP_SENSE_DONE_EVENTID, &reply, sizeof(reply), 100);
+ WMI_TEMP_SENSE_DONE_EVENTID, &reply, sizeof(reply),
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2822,7 +2828,7 @@ int wmi_addba_rx_resp(struct wil6210_priv *wil,
rc = wmi_call(wil, WMI_RCP_ADDBA_RESP_CMDID, mid, &cmd, sizeof(cmd),
WMI_RCP_ADDBA_RESP_SENT_EVENTID, &reply, sizeof(reply),
- 100);
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2904,7 +2910,7 @@ int wmi_ps_dev_profile_cfg(struct wil6210_priv *wil,
rc = wmi_call(wil, WMI_PS_DEV_PROFILE_CFG_CMDID, vif->mid,
&cmd, sizeof(cmd),
WMI_PS_DEV_PROFILE_CFG_EVENTID, &reply, sizeof(reply),
- 100);
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2941,7 +2947,7 @@ int wmi_set_mgmt_retry(struct wil6210_priv *wil, u8 retry_short)
rc = wmi_call(wil, WMI_SET_MGMT_RETRY_LIMIT_CMDID, vif->mid,
&cmd, sizeof(cmd),
WMI_SET_MGMT_RETRY_LIMIT_EVENTID, &reply, sizeof(reply),
- 100);
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
@@ -2971,7 +2977,7 @@ int wmi_get_mgmt_retry(struct wil6210_priv *wil, u8 *retry_short)
memset(&reply, 0, sizeof(reply));
rc = wmi_call(wil, WMI_GET_MGMT_RETRY_LIMIT_CMDID, vif->mid, NULL, 0,
WMI_GET_MGMT_RETRY_LIMIT_EVENTID, &reply, sizeof(reply),
- 100);
+ WIL_WMI_CALL_GENERAL_TO_MS);
if (rc)
return rc;
--
1.9.1
next prev parent reply other threads:[~2019-06-16 7:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-16 7:25 [PATCH 00/11] wil6210 patches Maya Erez
2019-06-16 7:25 ` [PATCH 01/11] wil6210: do not reset FW in STA to P2P client interface switch Maya Erez
2019-06-27 17:51 ` Kalle Valo
2019-06-16 7:25 ` [PATCH 02/11] wil6210: enlarge Tx status ring size Maya Erez
2019-06-16 7:25 ` [PATCH 03/11] wil6210: increase the frequency of status ring hw tail update Maya Erez
2019-06-16 7:26 ` [PATCH 04/11] wil6210: Add support for setting RBUFCAP configuration Maya Erez
2019-06-16 7:26 ` [PATCH 05/11] wil6210: fix printout in wil_read_pmccfg Maya Erez
2019-06-16 7:26 ` [PATCH 06/11] wil6210: clear FW and ucode log address Maya Erez
2019-06-16 7:26 ` [PATCH 07/11] wil6210: update cid boundary check of wil_find_cid/_by_idx() Maya Erez
2019-06-16 7:26 ` [PATCH 08/11] wil6210: publish max_msdu_size to FW on BCAST ring Maya Erez
2019-06-16 7:26 ` [PATCH 09/11] wil6210: add support for reading multiple RFs temperature via debugfs Maya Erez
2019-06-16 7:26 ` Maya Erez [this message]
2019-06-16 7:26 ` [PATCH 11/11] wil6210: drop old event after wmi_call timeout Maya Erez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560669967-23706-11-git-send-email-merez@codeaurora.org \
--to=merez@codeaurora.org \
--cc=amasri@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wil6210@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).