From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Cc: ath11k@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH 01/49] dt: bindings: net: add qcom,ath11k.txt
Date: Tue, 20 Aug 2019 18:47:27 +0300 [thread overview]
Message-ID: <1566316095-27507-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1566316095-27507-1-git-send-email-kvalo@codeaurora.org>
---
.../bindings/net/wireless/qcom,ath11k.txt | 127 +++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
new file mode 100644
index 000000000000..1824238b4b50
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
@@ -0,0 +1,127 @@
+* Qualcomm Technologies ath11k wireless devices
+
+Required properties:
+- compatible: Should be "qcom,ipq8074-wifi"
+
+AHB based ipq8074 uses most of the properties defined in this doc.
+
+Optional properties:
+- reg: Address and length of the register set for the device.
+- interrupts: List of interrupt lines. Must contain an entry
+ for each entry in the interrupt-names property.
+- interrupt-names: Must include the entries for CE interrupt
+ names ("ce0" to "ce11") and hw srng interrupt
+ names.
+- qcom,rproc: DT entry of q6v5-wcss
+
+Example:
+
+wifi0: wifi@c000000 {
+ compatible = "qcom,ipq8074-wifi";
+ reg = <0xc000000 0x2000000>;
+ interrupts = <0 320 1>,
+ <0 319 1>,
+ <0 318 1>,
+ <0 317 1>,
+ <0 316 1>,
+ <0 315 1>,
+ <0 314 1>,
+ <0 311 1>,
+ <0 310 1>,
+ <0 411 1>,
+ <0 410 1>,
+ <0 40 1>,
+ <0 39 1>,
+ <0 302 1>,
+ <0 301 1>,
+ <0 37 1>,
+ <0 36 1>,
+ <0 296 1>,
+ <0 295 1>,
+ <0 294 1>,
+ <0 293 1>,
+ <0 292 1>,
+ <0 291 1>,
+ <0 290 1>,
+ <0 289 1>,
+ <0 288 1>,
+ <0 239 1>,
+ <0 236 1>,
+ <0 235 1>,
+ <0 234 1>,
+ <0 233 1>,
+ <0 232 1>,
+ <0 231 1>,
+ <0 230 1>,
+ <0 229 1>,
+ <0 228 1>,
+ <0 224 1>,
+ <0 223 1>,
+ <0 203 1>,
+ <0 183 1>,
+ <0 180 1>,
+ <0 179 1>,
+ <0 178 1>,
+ <0 177 1>,
+ <0 176 1>,
+ <0 163 1>,
+ <0 162 1>,
+ <0 160 1>,
+ <0 159 1>,
+ <0 158 1>,
+ <0 157 1>,
+ <0 156 1>;
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&qcom_q6v5_wcss>;
+};
next prev parent reply other threads:[~2019-08-20 15:48 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 15:47 [PATCH 00/49] ath11k: driver for Qualcomm IEEE 802.11ax devices Kalle Valo
2019-08-20 15:47 ` Kalle Valo [this message]
2019-08-27 17:13 ` [PATCH 01/49] dt: bindings: net: add qcom,ath11k.txt Rob Herring
2019-09-05 13:18 ` Kalle Valo
2019-08-20 15:47 ` [PATCH 02/49] ath11k: add Kconfig Kalle Valo
2019-08-20 16:52 ` John Crispin
2019-08-20 15:47 ` [PATCH 03/49] ath11k: add Makefile Kalle Valo
2019-08-20 15:47 ` [PATCH 04/49] ath11k: add ahb.c Kalle Valo
2019-08-20 20:05 ` Johannes Berg
2019-08-21 9:29 ` Vasanthakumar Thiagarajan
2019-08-21 9:40 ` Johannes Berg
2019-08-21 17:10 ` Vasanthakumar Thiagarajan
2019-08-20 15:47 ` [PATCH 05/49] ath11k: add ahb.h Kalle Valo
2019-08-20 15:47 ` [PATCH 06/49] ath11k: add ce.c Kalle Valo
2019-08-20 20:23 ` Johannes Berg
2019-08-21 9:45 ` Vasanthakumar Thiagarajan
2019-08-20 15:47 ` [PATCH 07/49] ath11k: add ce.h Kalle Valo
2019-08-20 15:47 ` [PATCH 08/49] ath11k: add core.c Kalle Valo
2019-08-20 20:32 ` Johannes Berg
2019-09-05 11:37 ` Kalle Valo
2019-10-15 16:24 ` Kalle Valo
2019-08-20 15:47 ` [PATCH 09/49] ath11k: add core.h Kalle Valo
2019-08-20 15:47 ` [PATCH 10/49] ath11k: add debug.c Kalle Valo
2019-08-26 13:47 ` Sven Eckelmann
2019-08-27 7:33 ` Anilkumar Kolli
2019-08-27 7:35 ` Sven Eckelmann
2019-08-27 9:04 ` Anilkumar Kolli
2019-08-27 9:53 ` Sven Eckelmann
2019-08-27 10:04 ` Anilkumar Kolli
2019-08-27 10:49 ` Sven Eckelmann
2019-08-20 15:47 ` [PATCH 11/49] ath11k: add debug.h Kalle Valo
2019-08-20 15:47 ` [PATCH 12/49] ath11k: add debug_htt_stats.c Kalle Valo
2019-08-20 15:47 ` [PATCH 13/49] ath11k: add debug_htt_stats.h Kalle Valo
2019-08-20 15:47 ` [PATCH 14/49] ath11k: add debugfs_sta.c Kalle Valo
2019-08-20 15:47 ` [PATCH 15/49] ath11k: add dp.c Kalle Valo
2019-08-20 15:47 ` [PATCH 16/49] ath11k: add dp.h Kalle Valo
2019-08-20 15:47 ` [PATCH 17/49] ath11k: add dp_rx.c Kalle Valo
2019-08-20 15:47 ` [PATCH 18/49] ath11k: add dp_rx.h Kalle Valo
2019-08-20 15:47 ` [PATCH 19/49] ath11k: add dp_tx.c Kalle Valo
2019-08-20 15:47 ` [PATCH 20/49] ath11k: add dp_tx.h Kalle Valo
2019-08-20 15:47 ` [PATCH 21/49] ath11k: add hal.c Kalle Valo
2019-08-20 15:47 ` [PATCH 22/49] ath11k: add hal.h Kalle Valo
2019-08-20 15:47 ` [PATCH 23/49] ath11k: add hal_desc.h Kalle Valo
2019-08-20 15:47 ` [PATCH 24/49] ath11k: add hal_rx.c Kalle Valo
2019-08-20 15:47 ` [PATCH 25/49] ath11k: add hal_rx.h Kalle Valo
2019-08-20 15:47 ` [PATCH 26/49] ath11k: add hal_tx.c Kalle Valo
2019-08-20 15:47 ` [PATCH 27/49] ath11k: add hal_tx.h Kalle Valo
2019-08-20 15:47 ` [PATCH 28/49] ath11k: add htc.c Kalle Valo
2019-08-20 15:47 ` [PATCH 29/49] ath11k: add htc.h Kalle Valo
2019-08-20 15:47 ` [PATCH 30/49] ath11k: add hw.h Kalle Valo
2019-08-20 15:47 ` [PATCH 31/49] ath11k: add mac.c Kalle Valo
2019-08-20 16:51 ` Toke Høiland-Jørgensen
2019-08-21 5:02 ` Vasanthakumar Thiagarajan
2019-08-21 10:08 ` Toke Høiland-Jørgensen
2019-08-27 10:43 ` Vasanthakumar Thiagarajan
2019-08-27 17:27 ` Toke Høiland-Jørgensen
2019-08-27 19:13 ` Ben Greear
2019-08-20 20:46 ` Johannes Berg
2019-08-23 12:15 ` Vasanthakumar Thiagarajan
2019-09-05 11:24 ` Kalle Valo
2019-09-05 11:58 ` Vasanthakumar Thiagarajan
2019-09-05 12:29 ` Kalle Valo
2019-09-05 12:50 ` Johannes Berg
2019-08-21 6:16 ` Sven Eckelmann
2019-10-15 16:28 ` Kalle Valo
2019-08-23 15:02 ` Nicolas Cavallari
2019-08-27 10:51 ` Vasanthakumar Thiagarajan
2019-08-20 15:47 ` [PATCH 32/49] ath11k: add mac.h Kalle Valo
2019-08-20 15:47 ` [PATCH 33/49] ath11k: add peer.c Kalle Valo
2019-08-20 15:48 ` [PATCH 34/49] ath11k: add peer.h Kalle Valo
2019-08-20 15:48 ` [PATCH 35/49] ath11k: add qmi.c Kalle Valo
2019-08-20 15:48 ` [PATCH 36/49] ath11k: add qmi.h Kalle Valo
2019-08-20 15:48 ` [PATCH 37/49] ath11k: add reg.c Kalle Valo
2019-08-20 15:48 ` [PATCH 38/49] ath11k: add reg.h Kalle Valo
2019-08-20 15:48 ` [PATCH 39/49] ath11k: add rx_desc.h Kalle Valo
2019-08-20 15:48 ` [PATCH 40/49] ath11k: add testmode.c Kalle Valo
2019-08-20 15:48 ` [PATCH 41/49] ath11k: add testmode.h Kalle Valo
2019-08-20 15:48 ` [PATCH 42/49] ath11k: add testmode_i.h Kalle Valo
2019-08-20 15:48 ` [PATCH 43/49] ath11k: add trace.c Kalle Valo
2019-08-20 15:48 ` [PATCH 44/49] ath11k: add trace.h Kalle Valo
2019-08-20 15:48 ` [PATCH 45/49] ath11k: add wmi.c Kalle Valo
2019-08-20 15:48 ` [PATCH 46/49] ath11k: add wmi.h Kalle Valo
2019-08-20 20:29 ` Johannes Berg
2019-08-23 4:21 ` Vasanthakumar Thiagarajan
2019-08-20 15:48 ` [PATCH 47/49] ath: add ath11k to Makefile Kalle Valo
2019-08-20 15:48 ` [PATCH 48/49] ath: add ath11k to Kconfig Kalle Valo
2019-08-20 15:48 ` [PATCH 49/49] MAINTAINERS: add ath11k Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566316095-27507-2-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).