From: Kalle Valo <kvalo@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 02/10] ath11k: add hw_params entry for QCA6390
Date: Thu, 13 Aug 2020 12:04:18 +0300 [thread overview]
Message-ID: <1597309466-19688-3-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1597309466-19688-1-git-send-email-kvalo@codeaurora.org>
From: Carl Huang <cjhuang@codeaurora.org>
Define own firmware directory and settings for QCA6390.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/core.c | 12 ++++++++++++
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/hw.c | 4 ++++
drivers/net/wireless/ath/ath11k/hw.h | 1 +
4 files changed, 18 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 38e830a2395b..093faf20f324 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -30,6 +30,18 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.bdf_addr = 0x4B0C0000,
.hw_ops = &ipq8074_ops,
},
+ {
+ .name = "qca6390 hw2.0",
+ .hw_rev = ATH11K_HW_QCA6390_HW20,
+ .fw = {
+ .dir = "QCA6390/hw2.0",
+ .board_size = 256 * 1024,
+ .cal_size = 256 * 1024,
+ },
+ .max_radios = 3,
+ .bdf_addr = 0x4B0C0000,
+ .hw_ops = &qca6390_ops,
+ },
};
static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index b6ccd9f93853..c48d53ec4fa7 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -90,6 +90,7 @@ struct ath11k_skb_rxcb {
enum ath11k_hw_rev {
ATH11K_HW_IPQ8074,
+ ATH11K_HW_QCA6390_HW20,
};
enum ath11k_firmware_mode {
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 7cc5f36509c0..6feb0f699cfc 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -32,3 +32,7 @@ const struct ath11k_hw_ops ipq8074_ops = {
const struct ath11k_hw_ops ipq6018_ops = {
.get_hw_mac_from_pdev_id = ath11k_hw_ipq6018_mac_from_pdev_id,
};
+
+const struct ath11k_hw_ops qca6390_ops = {
+ .get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id,
+};
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index f31d53f6adb8..1958830c01ec 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -120,6 +120,7 @@ struct ath11k_hw_params {
extern const struct ath11k_hw_ops ipq8074_ops;
extern const struct ath11k_hw_ops ipq6018_ops;
+extern const struct ath11k_hw_ops qca6390_ops;
static inline
int ath11k_hw_get_mac_from_pdev_id(struct ath11k_hw_params *hw,
--
2.7.4
next prev parent reply other threads:[~2020-08-13 9:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-13 9:04 [PATCH 00/10] ath11k: initial PCI support Kalle Valo
2020-08-13 9:04 ` [PATCH 01/10] ath11k: do not depend on ARCH_QCOM for ath11k Kalle Valo
2020-08-17 10:15 ` Kalle Valo
2020-08-13 9:04 ` Kalle Valo [this message]
2020-08-13 9:04 ` [PATCH 03/10] ath11k: move ring mask definitions to hw_params Kalle Valo
2020-08-13 9:04 ` [PATCH 04/10] ath11k: add simple PCI client driver for QCA6390 chipset Kalle Valo
2020-08-13 9:04 ` [PATCH 05/10] ath11k: pci: setup resources Kalle Valo
2020-08-13 9:04 ` [PATCH 06/10] ath11k: pci: add MSI config initialisation Kalle Valo
2020-08-13 9:04 ` [PATCH 07/10] ath11k: implement ath11k_core_pre_init() Kalle Valo
2020-08-13 9:04 ` [PATCH 08/10] ath11k: register MHI controller device for QCA6390 Kalle Valo
2020-08-13 9:04 ` [PATCH 09/10] ath11k: pci: add HAL, CE and core initialisation Kalle Valo
2020-08-13 9:04 ` [PATCH 10/10] ath11k: use remoteproc only with AHB devices Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1597309466-19688-3-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).