[PATCH v2 07/12] ath11k: ce: get msi_addr and msi_data before srng setup

[Kalle Valo <kvalo@codeaurora.org>]

From: Carl Huang <cjhuang@codeaurora.org>

Move function to get msi_addr and msi_data before srng setup,
otherwise srng is setup with no MSI configuration.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/ce.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/ce.c b/drivers/net/wireless/ath/ath11k/ce.c
index 41c1a6e56596..b2da1f937478 100644
--- a/drivers/net/wireless/ath/ath11k/ce.c
+++ b/drivers/net/wireless/ath/ath11k/ce.c
@@ -467,6 +467,9 @@ static int ath11k_ce_init_ring(struct ath11k_base *ab,
 	params.ring_base_vaddr = ce_ring->base_addr_owner_space;
 	params.num_entries = ce_ring->nentries;
 
+	if (!(CE_ATTR_DIS_INTR & ab->hw_params.host_ce_config[ce_id].flags))
+		ath11k_ce_srng_msi_ring_params_setup(ab, ce_id, &params);
+
 	switch (type) {
 	case HAL_CE_SRC:
 		if (!(CE_ATTR_DIS_INTR & ab->hw_params.host_ce_config[ce_id].flags))
@@ -500,9 +503,6 @@ static int ath11k_ce_init_ring(struct ath11k_base *ab,
 		return ret;
 	}
 
-	if (!(CE_ATTR_DIS_INTR & ab->hw_params.host_ce_config[ce_id].flags))
-		ath11k_ce_srng_msi_ring_params_setup(ab, ce_id, &params);
-
 	ce_ring->hal_ring_id = ret;
 
 	return 0;
-- 
2.7.4