From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
To: 000ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Cc: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH v3 0/3] Add support to configure beacon tx mode
Date: Tue, 8 Jun 2021 20:34:00 +0530 [thread overview]
Message-ID: <1623164643-7803-1-git-send-email-mkenna@codeaurora.org> (raw)
Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.
Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.
V3: Addressed Johnson's comment on v2 patch.
V2: Addressed Johannes's comment on v1 patch.
Maharaja Kennadyrajan (3):
nl80211: Add support for beacon tx mode
mac80211: Add support for beacon tx mode
ath11k: Add support for beacon tx mode
drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
include/net/cfg80211.h | 4 ++++
include/net/mac80211.h | 2 ++
include/uapi/linux/nl80211.h | 16 ++++++++++++++++
net/mac80211/cfg.c | 2 ++
net/wireless/nl80211.c | 9 +++++++++
6 files changed, 40 insertions(+), 3 deletions(-)
--
2.7.4
next reply other threads:[~2021-06-08 15:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 15:04 Maharaja Kennadyrajan [this message]
2021-06-08 15:04 ` [PATCH v3 1/3] nl80211: Add support for beacon tx mode Maharaja Kennadyrajan
2021-06-08 15:04 ` [PATCH v3 2/3] mac80211: " Maharaja Kennadyrajan
2021-06-08 15:04 ` [PATCH v3 3/3] ath11k: " Maharaja Kennadyrajan
2021-06-08 15:06 ` [PATCH v3 0/3] Add support to configure " Maharaja Kennadyrajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623164643-7803-1-git-send-email-mkenna@codeaurora.org \
--to=mkenna@codeaurora.org \
--cc=000ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).