From: Sujith <Sujith.Manoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>, <Jouni.Malinen@Atheros.com>,
<Luis.Rodriguez@Atheros.com>
Subject: [PATCH 4/6] ath9k: Remove remaining occurrences of CONFIG_SLOW_ANT_DIV
Date: Sun, 7 Dec 2008 21:43:10 +0530 [thread overview]
Message-ID: <18747.62998.68377.181538@gargle.gargle.HOWL> (raw)
Slow Antenna Diversity has been removed, these are remnants
of the old code.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath9k/core.h | 3 ---
drivers/net/wireless/ath9k/hw.c | 13 ++-----------
drivers/net/wireless/ath9k/main.c | 8 --------
3 files changed, 2 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 9abdbd8..0e3c225 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -715,9 +715,6 @@ struct ath_softc {
enum ath9k_ht_extprotspacing sc_ht_extprotspacing;
enum ath9k_ht_macmode tx_chan_width;
-#ifdef CONFIG_SLOW_ANT_DIV
- struct ath_antdiv sc_antdiv;
-#endif
enum {
OK, /* no change needed */
UPDATE, /* update pending */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 4d70430..60d18d6 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -641,10 +641,7 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
struct ath_hal_5416 *ahp;
struct ath_hal *ah;
int ecode;
-#ifndef CONFIG_SLOW_ANT_DIV
- u32 i;
- u32 j;
-#endif
+ u32 i, j;
ahp = ath9k_hw_newstate(devid, sc, mem, status);
if (ahp == NULL)
@@ -854,7 +851,6 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
if (AR_SREV_9280_20_OR_LATER(ah))
ath9k_hw_init_txgain_ini(ah);
-#ifndef CONFIG_SLOW_ANT_DIV
if (ah->ah_devid == AR9280_DEVID_PCI) {
for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) {
u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
@@ -868,7 +864,7 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
}
}
}
-#endif
+
if (!ath9k_hw_fill_cap_info(ah)) {
DPRINTF(ah->ah_sc, ATH_DBG_RESET,
"failed ath9k_hw_fill_cap_info\n");
@@ -1295,11 +1291,6 @@ static int ath9k_hw_process_ini(struct ath_hal *ah,
u32 reg = INI_RA(&ahp->ah_iniModes, i, 0);
u32 val = INI_RA(&ahp->ah_iniModes, i, modesIndex);
-#ifdef CONFIG_SLOW_ANT_DIV
- if (ah->ah_devid == AR9280_DEVID_PCI)
- val = ath9k_hw_ini_fixup(ah, &ahp->ah_eeprom, reg, val);
-#endif
-
REG_WRITE(ah, reg, val);
if (reg >= 0x7800 && reg < 0x78a0
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 11cd52e..f1877da 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1514,11 +1514,6 @@ static int ath_init(u16 devid, struct ath_softc *sc)
/* save MISC configurations */
sc->sc_config.swBeaconProcess = 1;
-#ifdef CONFIG_SLOW_ANT_DIV
- /* range is 40 - 255, we use something in the middle */
- ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127);
-#endif
-
/* setup channels and rates */
sc->sbands[IEEE80211_BAND_2GHZ].channels =
@@ -2130,9 +2125,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
-#ifdef CONFIG_SLOW_ANT_DIV
- ath_slow_ant_div_stop(&sc->sc_antdiv);
-#endif
/* Stop ANI */
del_timer_sync(&sc->sc_ani.timer);
--
1.6.0.3
reply other threads:[~2008-12-07 16:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18747.62998.68377.181538@gargle.gargle.HOWL \
--to=sujith.manoharan@atheros.com \
--cc=Jouni.Malinen@Atheros.com \
--cc=Luis.Rodriguez@Atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox