From: Sujith <Sujith.Manoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 09/12] ath9k: Cleanup TX power calculation for 4K chips
Date: Fri, 7 Aug 2009 09:45:30 +0530 [thread overview]
Message-ID: <19067.43618.973315.564996@gargle.gargle.HOWL> (raw)
Write CCK power-per-rate array always and report
correct TX power to regulatory.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/eeprom_4k.c | 72 +++++++++++++--------------
1 files changed, 35 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index c963615..29878e0 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -703,11 +703,11 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
}
static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u16 cfgCtl,
- u8 twiceAntennaReduction,
- u8 twiceMaxRegulatoryPower,
- u8 powerLimit)
+ struct ath9k_channel *chan,
+ u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u8 powerLimit)
{
struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
struct modal_eep_4k_header *pModal = &pEepData->modalHeader;
@@ -724,10 +724,10 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
}
ath9k_hw_set_4k_power_per_rate_table(ah, chan,
- &ratesArray[0], cfgCtl,
- twiceAntennaReduction,
- twiceMaxRegulatoryPower,
- powerLimit);
+ &ratesArray[0], cfgCtl,
+ twiceAntennaReduction,
+ twiceMaxRegulatoryPower,
+ powerLimit);
ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
@@ -737,11 +737,23 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
ratesArray[i] = AR5416_MAX_RATE_POWER;
}
+
+ /* Update regulatory */
+
+ i = rate6mb;
+ if (IS_CHAN_HT40(chan))
+ i = rateHt40_0;
+ else if (IS_CHAN_HT20(chan))
+ i = rateHt20_0;
+
+ ah->regulatory.max_power_level = ratesArray[i];
+
if (AR_SREV_9280_10_OR_LATER(ah)) {
for (i = 0; i < Ar5416RateSize; i++)
ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
}
+ /* OFDM power per rate */
REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
ATH9K_POW_SM(ratesArray[rate18mb], 24)
| ATH9K_POW_SM(ratesArray[rate12mb], 16)
@@ -753,19 +765,19 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
| ATH9K_POW_SM(ratesArray[rate36mb], 8)
| ATH9K_POW_SM(ratesArray[rate24mb], 0));
- if (IS_CHAN_2GHZ(chan)) {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
- ATH9K_POW_SM(ratesArray[rate2s], 24)
- | ATH9K_POW_SM(ratesArray[rate2l], 16)
- | ATH9K_POW_SM(ratesArray[rateXr], 8)
- | ATH9K_POW_SM(ratesArray[rate1l], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
- ATH9K_POW_SM(ratesArray[rate11s], 24)
- | ATH9K_POW_SM(ratesArray[rate11l], 16)
- | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
- | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
- }
-
+ /* CCK power per rate */
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+ ATH9K_POW_SM(ratesArray[rate2s], 24)
+ | ATH9K_POW_SM(ratesArray[rate2l], 16)
+ | ATH9K_POW_SM(ratesArray[rateXr], 8)
+ | ATH9K_POW_SM(ratesArray[rate1l], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+ ATH9K_POW_SM(ratesArray[rate11s], 24)
+ | ATH9K_POW_SM(ratesArray[rate11l], 16)
+ | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+ | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
+
+ /* HT20 power per rate */
REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
| ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
@@ -777,6 +789,7 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
| ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
| ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
+ /* HT40 power per rate */
if (IS_CHAN_HT40(chan)) {
REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
ATH9K_POW_SM(ratesArray[rateHt40_3] +
@@ -796,27 +809,12 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
ht40PowerIncForPdadc, 8)
| ATH9K_POW_SM(ratesArray[rateHt40_4] +
ht40PowerIncForPdadc, 0));
-
REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
| ATH9K_POW_SM(ratesArray[rateExtCck], 16)
| ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
| ATH9K_POW_SM(ratesArray[rateDupCck], 0));
}
-
- i = rate6mb;
-
- if (IS_CHAN_HT40(chan))
- i = rateHt40_0;
- else if (IS_CHAN_HT20(chan))
- i = rateHt20_0;
-
- if (AR_SREV_9280_10_OR_LATER(ah))
- ah->regulatory.max_power_level =
- ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
- else
- ah->regulatory.max_power_level = ratesArray[i];
-
}
static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
--
1.6.4
reply other threads:[~2009-08-07 4:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19067.43618.973315.564996@gargle.gargle.HOWL \
--to=sujith.manoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox