From: Sujith <Sujith.Manoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 1/4] ath9k: Reduce the frequency of PA offset calibration
Date: Wed, 26 Aug 2009 08:39:40 +0530 [thread overview]
Message-ID: <19092.42868.444264.146442@gargle.gargle.HOWL> (raw)
PA calibration need not be done if the offset is not varying.
The current logic does PA calibration even if the offset is the
same.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/calib.c | 25 +++++++++++++++++++++----
drivers/net/wireless/ath/ath9k/calib.h | 7 +++++++
drivers/net/wireless/ath/ath9k/hw.h | 1 +
3 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 20f74b5..47a024d 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -861,7 +861,7 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
REG_WRITE(ah, regList[i][0], regList[i][1]);
}
-static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
+static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset)
{
u32 regVal;
@@ -877,6 +877,8 @@ static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
{ 0x7838, 0 },
};
+ DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
+
if (AR_SREV_9285_11(ah)) {
REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
udelay(10);
@@ -936,6 +938,17 @@ static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
offs_6_1 = offset>>1;
offs_0 = offset & 1;
+ if ((!is_reset) && (ah->pacal_info.prev_offset == offset)) {
+ if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
+ ah->pacal_info.max_skipcount =
+ 2 * ah->pacal_info.max_skipcount;
+ ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
+ } else {
+ ah->pacal_info.max_skipcount = 1;
+ ah->pacal_info.skipcount = 0;
+ ah->pacal_info.prev_offset = offset;
+ }
+
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_OFFS, offs_6_1);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, offs_0);
@@ -982,8 +995,12 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
/* Do periodic PAOffset Cal */
if (AR_SREV_9271(ah))
ath9k_hw_9271_pa_cal(ah);
- else if (AR_SREV_9285_11_OR_LATER(ah))
- ath9k_hw_9285_pa_cal(ah);
+ else if (AR_SREV_9285_11_OR_LATER(ah)) {
+ if (!ah->pacal_info.skipcount)
+ ath9k_hw_9285_pa_cal(ah, false);
+ else
+ ah->pacal_info.skipcount--;
+ }
if (OLC_FOR_AR9280_20_LATER || OLC_FOR_AR9287_10_LATER)
ath9k_olc_temp_compensation(ah);
@@ -1081,7 +1098,7 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
/* Do PA Calibration */
if (AR_SREV_9285_11_OR_LATER(ah))
- ath9k_hw_9285_pa_cal(ah);
+ ath9k_hw_9285_pa_cal(ah, true);
/* Do NF Calibration after DC offset and other calibrations */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 547e697..019bcbb 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -110,6 +110,13 @@ struct ath9k_nfcal_hist {
u8 invalidNFcount;
};
+#define MAX_PACAL_SKIPCOUNT 8
+struct ath9k_pacal_info{
+ int32_t prev_offset; /* Previous value of PA offset value */
+ int8_t max_skipcount; /* Max No. of times PACAL can be skipped */
+ int8_t skipcount; /* No. of times the PACAL to be skipped */
+};
+
bool ath9k_hw_reset_calvalid(struct ath_hw *ah);
void ath9k_hw_start_nfcal(struct ath_hw *ah);
void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 24b3063..b24150a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -424,6 +424,7 @@ struct ath_hw {
enum ath9k_power_mode power_mode;
struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+ struct ath9k_pacal_info pacal_info;
struct ar5416Stats stats;
struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES];
--
1.6.4
reply other threads:[~2009-08-26 3:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19092.42868.444264.146442@gargle.gargle.HOWL \
--to=sujith.manoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox