From: Sujith <Sujith.Manoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 1/2] ath9k: Fix RX Filter handling for BAR
Date: Thu, 3 Sep 2009 12:08:43 +0530 [thread overview]
Message-ID: <19103.25715.131295.357646@gargle.gargle.HOWL> (raw)
BAR frames have to be sent to mac80211 only if the
current channel is HT. Also, move the macro to
enum ath9k_rx_filter.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 3 ++-
drivers/net/wireless/ath/ath9k/mac.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 2 +-
drivers/net/wireless/ath/ath9k/recv.c | 3 +++
drivers/net/wireless/ath/ath9k/reg.h | 1 -
5 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 71f27f3..011b14f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -3967,7 +3967,8 @@ void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
{
u32 phybits;
- REG_WRITE(ah, AR_RX_FILTER, (bits & 0xffff) | AR_RX_COMPR_BAR);
+ REG_WRITE(ah, AR_RX_FILTER, bits);
+
phybits = 0;
if (bits & ATH9K_RX_FILTER_PHYRADAR)
phybits |= AR_PHY_ERR_RADAR;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 7b39822..f56e77d 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -568,6 +568,7 @@ enum ath9k_rx_filter {
ATH9K_RX_FILTER_PROBEREQ = 0x00000080,
ATH9K_RX_FILTER_PHYERR = 0x00000100,
ATH9K_RX_FILTER_MYBEACON = 0x00000200,
+ ATH9K_RX_FILTER_COMP_BAR = 0x00000400,
ATH9K_RX_FILTER_PSPOLL = 0x00004000,
ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
ATH9K_RX_FILTER_MCAST_BCAST_ALL = 0x00008000,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c2efdf2..b1d189c 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2433,7 +2433,7 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
ath9k_ps_restore(sc);
- DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
+ DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", rfilt);
}
static void ath9k_sta_notify(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 52e62da..ec0abf8 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -423,6 +423,9 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->rx.rxfilter & FIF_PSPOLL)
rfilt |= ATH9K_RX_FILTER_PSPOLL;
+ if (conf_is_ht(&sc->hw->conf))
+ rfilt |= ATH9K_RX_FILTER_COMP_BAR;
+
if (sc->sec_wiphy || (sc->rx.rxfilter & FIF_OTHER_BSS)) {
/* TODO: only needed if more than one BSSID is in use in
* station/adhoc mode */
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 3ddb243..e5c29eb 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1325,7 +1325,6 @@ enum {
#define AR_CFP_VAL 0x0000FFFF
#define AR_RX_FILTER 0x803C
-#define AR_RX_COMPR_BAR 0x00000400
#define AR_MCAST_FIL0 0x8040
#define AR_MCAST_FIL1 0x8044
--
1.6.4.2
reply other threads:[~2009-09-03 6:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19103.25715.131295.357646@gargle.gargle.HOWL \
--to=sujith.manoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox