linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maximilian Engelhardt <engelhardt@perisens.de>
To: seth.forshee@canonical.com
Cc: wireless-regdb@lists.infradead.org,
	linux-wireless@vger.kernel.org, maxi@daemonizer.de
Subject: wireless-regdb: Update regulatory rules for Germany (DE) on 5GHz
Date: Tue, 19 Apr 2016 20:03:16 +0200	[thread overview]
Message-ID: <1958820.LBuzOElZFT@perisens15> (raw)

[-- Attachment #1: Type: text/plain, Size: 2434 bytes --]

Hi,

In Europe ETSI standardized the used for short range devices (SRD) [1] in ETSI 
EN 300 440-1 [2].
According to this standard generic use equipment is allowed to transmit in the 
frequency range form 5725 MHz to 5875 MHz with a maximum output power of 
25 mW e.i.r.p. This generic allocation also allows transmission of 802.11 
devices.

[3] has a list of countries and their status about the implementation of the 
SRD frequency bands. For the 5 GHz band this can be seen on page 38 in the 
paragraph ANNEX 1 and the entry Annex j.

Attached is a patch that adds the 5 GHz SRD band to db.txt for Germany.

If it is acceptable I can provide a patch adding the 5 GHz SRD band for the 
other countries listed in [3].

Thanks,
Maxi


[1] http://www.etsi.org/technologies-clusters/technologies/radio/short-range-devices
[2] http://www.etsi.org/deliver/etsi_en/300400_300499/30044001/01.06.01_60/en_30044001v010601p.pdf
[3] http://www.erodocdb.dk/Docs/doc98/official/pdf/REC7003e.pdf


diff --git a/db.txt b/db.txt
index e9ba21a..38a9340 100644
--- a/db.txt
+++ b/db.txt
@@ -319,6 +319,9 @@ country CZ: DFS-ETSI
 # limit is used here as the non-interference with radar and satellite
 # apps relies on the attenuation by the building walls only in the
 # absence of DFS; the neighbour countries have 100mW limit here as well.
+# The ETSI EN 300 440-1 standard for short range devices in the 5 GHz band has
+# been implemented in Germany:
+# https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Frequenzen/Allgemeinzuteilungen/2014_69_SRD_pdf.pdf
 
 country DE: DFS-ETSI
        # entries 279004 and 280006
@@ -329,6 +332,8 @@ country DE: DFS-ETSI
        (5250 - 5350 @ 80), (100 mW), NO-OUTDOOR, DFS, AUTO-BW
        # entries 308002, 309001 and 310003
        (5470 - 5725 @ 160), (500 mW), DFS
+       # short range devices (ETSI EN 300 440-1)
+       (5725 - 5875 @ 80), (25 mW)
        # 60 GHz band channels 1-4, ref: Etsi En 302 567
        (57000 - 66000 @ 2160), (40)



-- 
Maximilian Engelhardt
Dipl.-Ing. (Univ.)
 
perisens GmbH
Lichtenbergstraße 8
85748 Garching bei München

tel:    +49 89 2155203-10
fax:    +49 89 2155203-19
web:    http://www.perisens.de/
_____________

perisens GmbH
Geschäftsführer: Dr. Florian Pfeiffer 
Sitz und Registergericht: München HRB 181857
USt-ID: DE-267481419

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

             reply	other threads:[~2016-04-19 18:03 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-19 18:03 Maximilian Engelhardt [this message]
2016-04-19 19:27 ` [wireless-regdb] wireless-regdb: Update regulatory rules for Germany (DE) on 5GHz Petko Bordjukov
2016-04-19 20:11   ` Bjørn Mork
2016-04-19 20:38     ` Petko Bordjukov
2016-04-21 13:19 ` Seth Forshee
2016-04-21 18:08   ` Maximilian Engelhardt
2016-04-21 18:51     ` Seth Forshee
2016-04-21 20:13       ` [wireless-regdb] " Anne Marcel Roorda
2016-04-21 20:40         ` Seth Forshee
2016-05-02 13:42     ` Seth Forshee
  -- strict thread matches above, loose matches on Subject: below --
2009-03-27  0:21 Bernhard Seibold
2009-03-27  7:15 ` Johannes Berg
2009-03-27  7:31   ` Johannes Berg
2009-03-27 10:55   ` Bernhard Seibold
2009-03-27 21:10 ` Luis R. Rodriguez
2009-03-27 21:12   ` Luis R. Rodriguez
2009-03-30 20:11 ` Thomas Bächler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1958820.LBuzOElZFT@perisens15 \
    --to=engelhardt@perisens.de \
    --cc=linux-wireless@vger.kernel.org \
    --cc=maxi@daemonizer.de \
    --cc=seth.forshee@canonical.com \
    --cc=wireless-regdb@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).