From: Sujith <m.sujith@gmail.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Sujith.Manoharan@atheros.com
Subject: [PATCH v2 2/6] ath9k_htc: Handle pending URBs properly
Date: Tue, 28 Dec 2010 14:28:05 +0530 [thread overview]
Message-ID: <19737.42653.754539.507702@gargle.gargle.HOWL> (raw)
From: Sujith Manoharan <Sujith.Manoharan@atheros.com>
When doing a channel change, the pending URBs have to be killed
properly on calling htc_stop().
This fixes the probe response timeout seen when sending UDP traffic at
a high rate and running background scan at the same time.
Cc: stable <stable@kernel.org>
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 40 +++++++++++++++++++++++++++---
drivers/net/wireless/ath/ath9k/hif_usb.h | 1 +
2 files changed, 37 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index c20c8c8..5ab3084 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -153,16 +153,36 @@ static void hif_usb_tx_cb(struct urb *urb)
case -ENODEV:
case -ESHUTDOWN:
/*
- * The URB has been killed, free the SKBs
- * and return.
+ * The URB has been killed, free the SKBs.
*/
ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
- return;
+
+ /*
+ * If the URBs are being flushed, no need to add this
+ * URB to the free list.
+ */
+ spin_lock(&hif_dev->tx.tx_lock);
+ if (hif_dev->tx.flags & HIF_USB_TX_FLUSH) {
+ spin_unlock(&hif_dev->tx.tx_lock);
+ return;
+ }
+ spin_unlock(&hif_dev->tx.tx_lock);
+
+ /*
+ * In the stop() case, this URB has to be added to
+ * the free list.
+ */
+ goto add_free;
default:
break;
}
- /* Check if TX has been stopped */
+ /*
+ * Check if TX has been stopped, this is needed because
+ * this CB could have been invoked just after the TX lock
+ * was released in hif_stop() and kill_urb() hasn't been
+ * called yet.
+ */
spin_lock(&hif_dev->tx.tx_lock);
if (hif_dev->tx.flags & HIF_USB_TX_STOP) {
spin_unlock(&hif_dev->tx.tx_lock);
@@ -314,6 +334,7 @@ static void hif_usb_start(void *hif_handle, u8 pipe_id)
static void hif_usb_stop(void *hif_handle, u8 pipe_id)
{
struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
+ struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
unsigned long flags;
spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
@@ -321,6 +342,12 @@ static void hif_usb_stop(void *hif_handle, u8 pipe_id)
hif_dev->tx.tx_skb_cnt = 0;
hif_dev->tx.flags |= HIF_USB_TX_STOP;
spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
+ /* The pending URBs have to be canceled. */
+ list_for_each_entry_safe(tx_buf, tx_buf_tmp,
+ &hif_dev->tx.tx_pending, list) {
+ usb_kill_urb(tx_buf->urb);
+ }
}
static int hif_usb_send(void *hif_handle, u8 pipe_id, struct sk_buff *skb,
@@ -587,6 +614,7 @@ free:
static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
{
struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
+ unsigned long flags;
list_for_each_entry_safe(tx_buf, tx_buf_tmp,
&hif_dev->tx.tx_buf, list) {
@@ -597,6 +625,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
kfree(tx_buf);
}
+ spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
+ hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
+ spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
list_for_each_entry_safe(tx_buf, tx_buf_tmp,
&hif_dev->tx.tx_pending, list) {
usb_kill_urb(tx_buf->urb);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index e4a5e2e..7b9d863 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -64,6 +64,7 @@ struct tx_buf {
};
#define HIF_USB_TX_STOP BIT(0)
+#define HIF_USB_TX_FLUSH BIT(1)
struct hif_usb_tx {
u8 flags;
--
1.7.3.4
reply other threads:[~2010-12-28 8:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19737.42653.754539.507702@gargle.gargle.HOWL \
--to=m.sujith@gmail.com \
--cc=Sujith.Manoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox