From: Sujith <m.sujith@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: ath9k-devel@lists.ath9k.org
Subject: [RFC/WIP 31/33] ath9k_htc: Remove unused WMI commands
Date: Fri, 21 Jan 2011 08:33:50 +0530 [thread overview]
Message-ID: <19768.63382.633231.531270@gargle.gargle.HOWL> (raw)
From: Sujith Manoharan <Sujith.Manoharan@atheros.com>
WMI_TGT_TXQ_ENABLE_CMDID
WMI_HOST_ATTACH
WMI_DEBUG_INFO_CMDID
WMI_BEACON_UPDATE_CMDID
WMI_RESET_CMDID
WMI_RX_LINK_CMDID
WMI_ABORT_TXQ_CMDID
WMI_STOP_DMA_RECV_CMDID
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath/ath9k/wmi.c | 16 ----------------
drivers/net/wireless/ath/ath9k/wmi.h | 8 --------
2 files changed, 0 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index 9c11d6e..a5f8f6b 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -27,16 +27,10 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_DISABLE_INTR_CMDID";
case WMI_ENABLE_INTR_CMDID:
return "WMI_ENABLE_INTR_CMDID";
- case WMI_RX_LINK_CMDID:
- return "WMI_RX_LINK_CMDID";
case WMI_ATH_INIT_CMDID:
return "WMI_ATH_INIT_CMDID";
- case WMI_ABORT_TXQ_CMDID:
- return "WMI_ABORT_TXQ_CMDID";
case WMI_STOP_TX_DMA_CMDID:
return "WMI_STOP_TX_DMA_CMDID";
- case WMI_STOP_DMA_RECV_CMDID:
- return "WMI_STOP_DMA_RECV_CMDID";
case WMI_ABORT_TX_DMA_CMDID:
return "WMI_ABORT_TX_DMA_CMDID";
case WMI_DRAIN_TXQ_CMDID:
@@ -51,8 +45,6 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_FLUSH_RECV_CMDID";
case WMI_SET_MODE_CMDID:
return "WMI_SET_MODE_CMDID";
- case WMI_RESET_CMDID:
- return "WMI_RESET_CMDID";
case WMI_NODE_CREATE_CMDID:
return "WMI_NODE_CREATE_CMDID";
case WMI_NODE_REMOVE_CMDID:
@@ -61,8 +53,6 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_VAP_REMOVE_CMDID";
case WMI_VAP_CREATE_CMDID:
return "WMI_VAP_CREATE_CMDID";
- case WMI_BEACON_UPDATE_CMDID:
- return "WMI_BEACON_UPDATE_CMDID";
case WMI_REG_READ_CMDID:
return "WMI_REG_READ_CMDID";
case WMI_REG_WRITE_CMDID:
@@ -71,10 +61,6 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_RC_STATE_CHANGE_CMDID";
case WMI_RC_RATE_UPDATE_CMDID:
return "WMI_RC_RATE_UPDATE_CMDID";
- case WMI_DEBUG_INFO_CMDID:
- return "WMI_DEBUG_INFO_CMDID";
- case WMI_HOST_ATTACH:
- return "WMI_HOST_ATTACH";
case WMI_TARGET_IC_UPDATE_CMDID:
return "WMI_TARGET_IC_UPDATE_CMDID";
case WMI_TGT_STATS_CMDID:
@@ -83,8 +69,6 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_TX_AGGR_ENABLE_CMDID";
case WMI_TGT_DETACH_CMDID:
return "WMI_TGT_DETACH_CMDID";
- case WMI_TGT_TXQ_ENABLE_CMDID:
- return "WMI_TGT_TXQ_ENABLE_CMDID";
case WMI_AGGR_LIMIT_CMD:
return "WMI_AGGR_LIMIT_CMD";
}
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index b705961..6e3edec 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -43,11 +43,8 @@ enum wmi_cmd_id {
/* Commands to Target */
WMI_DISABLE_INTR_CMDID,
WMI_ENABLE_INTR_CMDID,
- WMI_RX_LINK_CMDID,
WMI_ATH_INIT_CMDID,
- WMI_ABORT_TXQ_CMDID,
WMI_STOP_TX_DMA_CMDID,
- WMI_STOP_DMA_RECV_CMDID,
WMI_ABORT_TX_DMA_CMDID,
WMI_DRAIN_TXQ_CMDID,
WMI_DRAIN_TXQ_ALL_CMDID,
@@ -55,23 +52,18 @@ enum wmi_cmd_id {
WMI_STOP_RECV_CMDID,
WMI_FLUSH_RECV_CMDID,
WMI_SET_MODE_CMDID,
- WMI_RESET_CMDID,
WMI_NODE_CREATE_CMDID,
WMI_NODE_REMOVE_CMDID,
WMI_VAP_REMOVE_CMDID,
WMI_VAP_CREATE_CMDID,
- WMI_BEACON_UPDATE_CMDID,
WMI_REG_READ_CMDID,
WMI_REG_WRITE_CMDID,
WMI_RC_STATE_CHANGE_CMDID,
WMI_RC_RATE_UPDATE_CMDID,
- WMI_DEBUG_INFO_CMDID,
- WMI_HOST_ATTACH,
WMI_TARGET_IC_UPDATE_CMDID,
WMI_TGT_STATS_CMDID,
WMI_TX_AGGR_ENABLE_CMDID,
WMI_TGT_DETACH_CMDID,
- WMI_TGT_TXQ_ENABLE_CMDID,
WMI_AGGR_LIMIT_CMD = 0x0026,
};
--
1.7.3.5
reply other threads:[~2011-01-21 3:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19768.63382.633231.531270@gargle.gargle.HOWL \
--to=m.sujith@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox