* [PATCH 3/28] rt2x00: Make debug option rt2x00-global
@ 2007-02-28 14:07 Ivo van Doorn
0 siblings, 0 replies; only message in thread
From: Ivo van Doorn @ 2007-02-28 14:07 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless
Remove per-driver debug option, and replace it with a
rt2x00 global debug option.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/mac80211/rt2x00/Kconfig b/drivers/net/wireless/mac80211/rt2x00/Kconfig
index 7206cb6..491fe08 100644
--- a/drivers/net/wireless/mac80211/rt2x00/Kconfig
+++ b/drivers/net/wireless/mac80211/rt2x00/Kconfig
@@ -16,12 +16,6 @@ config RT2400PCI
When compiled as a module, this driver will be called "rt2400pci.ko".
-config RT2400PCI_DEBUG
- bool "Ralink rt2400 debug output"
- depends on RT2400PCI
- ---help---
- Enable debugging output.
-
config RT2500PCI
tristate "Ralink rt2500 pci/pcmcia support"
depends on RT2X00 && PCI
@@ -31,12 +25,6 @@ config RT2500PCI
When compiled as a module, this driver will be called "rt2500pci.ko".
-config RT2500PCI_DEBUG
- bool "Ralink rt2500 debug output"
- depends on RT2500PCI
- ---help---
- Enable debugging output.
-
config RT61PCI
tristate "Ralink rt61 pci/pcmcia support"
depends on RT2X00 && FW_LOADER && PCI
@@ -47,12 +35,6 @@ config RT61PCI
When compiled as a module, this driver will be called "rt61pci.ko".
-config RT61PCI_DEBUG
- bool "Ralink rt61 debug output"
- depends on RT61PCI
- ---help---
- Enable debugging output.
-
config RT2500USB
tristate "Ralink rt2500 usb support"
depends on RT2X00 && USB
@@ -61,12 +43,6 @@ config RT2500USB
When compiled as a module, this driver will be called "rt2500usb.ko".
-config RT2500USB_DEBUG
- bool "Ralink rt2500 debug output"
- depends on RT2500USB
- ---help---
- Enable debugging output.
-
config RT73USB
tristate "Ralink rt73 usb support"
depends on RT2X00 && FW_LOADER && USB
@@ -76,12 +52,6 @@ config RT73USB
When compiled as a module, this driver will be called "rt73usb.ko".
-config RT73USB_DEBUG
- bool "Ralink rt73 debug output"
- depends on RT73USB
- ---help---
- Enable debugging output.
-
config RT2X00_DEBUGFS
tristate "Ralink debugfs support"
depends on RT2X00 && DEBUG_FS
@@ -89,3 +59,9 @@ config RT2X00_DEBUGFS
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 devices.
+
+config RT2X00_DEBUG
+ bool "Ralink debug output"
+ depends on RT2X00
+ ---help---
+ Enable debugging output for all rt2x00 modules
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
index df1e569..14e55b9 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -47,10 +47,6 @@
*/
#define DRV_NAME "rt2400pci"
-#ifdef CONFIG_RT2400PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2400PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
@@ -3037,10 +3033,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2400PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2400PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt2400pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
index 3594dc5..6722135 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -47,10 +47,6 @@
*/
#define DRV_NAME "rt2500pci"
-#ifdef CONFIG_RT2500PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2500PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
@@ -3349,10 +3345,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2500PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2500PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt2500pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
index 0a0de18..df155ba 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -43,10 +43,6 @@
*/
#define DRV_NAME "rt2500usb"
-#ifdef CONFIG_RT2500USB_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT2500USB_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00usb.h"
#include "rt2500usb.h"
@@ -3183,10 +3179,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2500USB_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT2500USB_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct usb_driver rt2500usb_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
index 757cd9e..abe458e 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -49,10 +49,6 @@
*/
#define DRV_NAME "rt61pci"
-#ifdef CONFIG_RT61PCI_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT61PCI_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
@@ -3879,10 +3875,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT61PCI_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT61PCI_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct pci_driver rt61pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
index 7311764..9626cf1 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -45,10 +45,6 @@
*/
#define DRV_NAME "rt73usb"
-#ifdef CONFIG_RT73USB_DEBUG
-#define CONFIG_RT2X00_DEBUG
-#endif /* CONFIG_RT73USB_DEBUG */
-
#include "rt2x00.h"
#include "rt2x00usb.h"
#include "rt73usb.h"
@@ -3519,10 +3515,10 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2573 USB chipset based cards");
MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT73USB_DEBUG
+#ifdef CONFIG_RT2X00_DEBUG
module_param_named(debug, rt2x00_debug_level, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Set this parameter to 1 to enable debug output.");
-#endif /* CONFIG_RT73USB_DEBUG */
+#endif /* CONFIG_RT2X00_DEBUG */
static struct usb_driver rt73usb_driver = {
.name = DRV_NAME,
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-02-28 14:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-28 14:07 [PATCH 3/28] rt2x00: Make debug option rt2x00-global Ivo van Doorn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).