From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John Linville" <linville@tuxdriver.com>
Cc: wireless <linux-wireless@vger.kernel.org>
Subject: [PATCH 3/4] rt2x00: Remove ieee80211_netif_oper usage
Date: Thu, 8 Mar 2007 22:14:51 +0100 [thread overview]
Message-ID: <200703082214.52070.IvDoorn@gmail.com> (raw)
Remove the ieee80211_netif_oper usage from rt2x00.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
index ff5d67a..f8a9867 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -1278,7 +1278,6 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2400pci_enable_led(rt2x00dev);
ieee80211_start_queues(rt2x00dev->hw);
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_WAKE);
return 0;
@@ -1294,7 +1293,6 @@ static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
return;
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_STOP);
ieee80211_stop_queues(rt2x00dev->hw);
/*
@@ -2418,8 +2416,6 @@ static int rt2400pci_probe(struct pci_dev *pci_dev,
goto exit_free_device;
}
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
exit_free_device:
@@ -2445,7 +2441,6 @@ static void rt2400pci_remove(struct pci_dev *pci_dev)
/*
* Uninitialize the 80211 stack data.
*/
- ieee80211_netif_oper(hw, NETIF_DETACH);
ieee80211_unregister_hw(hw);
/*
@@ -2477,8 +2472,6 @@ static int rt2400pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
NOTICE("Going to sleep.\n");
- ieee80211_netif_oper(hw, NETIF_DETACH);
-
/*
* Disable the radio.
*/
@@ -2539,8 +2532,6 @@ static int rt2400pci_resume(struct pci_dev *pci_dev)
if (status)
return status;
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
index 7a1d924..bddbbf9 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -1404,7 +1404,6 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2500pci_enable_led(rt2x00dev);
ieee80211_start_queues(rt2x00dev->hw);
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_WAKE);
return 0;
@@ -1420,7 +1419,6 @@ static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
return;
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_STOP);
ieee80211_stop_queues(rt2x00dev->hw);
/*
@@ -2715,8 +2713,6 @@ static int rt2500pci_probe(struct pci_dev *pci_dev,
goto exit_free_device;
}
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
exit_free_device:
@@ -2742,7 +2738,6 @@ static void rt2500pci_remove(struct pci_dev *pci_dev)
/*
* Uninitialize the 80211 stack data.
*/
- ieee80211_netif_oper(hw, NETIF_DETACH);
ieee80211_unregister_hw(hw);
/*
@@ -2774,8 +2769,6 @@ static int rt2500pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
NOTICE("Going to sleep.\n");
- ieee80211_netif_oper(hw, NETIF_DETACH);
-
/*
* Disable the radio.
*/
@@ -2836,8 +2829,6 @@ static int rt2500pci_resume(struct pci_dev *pci_dev)
if (status)
return status;
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
index 82d5d1b..187076d 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -1311,7 +1311,6 @@ static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2500usb_enable_led(rt2x00dev);
ieee80211_start_queues(rt2x00dev->hw);
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_WAKE);
return 0;
@@ -1328,7 +1327,6 @@ static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
return;
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_STOP);
ieee80211_stop_queues(rt2x00dev->hw);
/*
@@ -2519,8 +2517,6 @@ static int rt2500usb_probe(struct usb_interface *usb_intf,
goto exit_free_device;
}
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
exit_free_device:
@@ -2540,7 +2536,6 @@ static void rt2500usb_disconnect(struct usb_interface *usb_intf)
/*
* Uninitialize the 80211 stack data.
*/
- ieee80211_netif_oper(hw, NETIF_DETACH);
ieee80211_unregister_hw(hw);
/*
@@ -2572,8 +2567,6 @@ static int rt2500usb_suspend(struct usb_interface *usb_intf,
NOTICE("Going to sleep.\n");
- ieee80211_netif_oper(hw, NETIF_DETACH);
-
/*
* Disable the radio.
*/
@@ -2629,8 +2622,6 @@ static int rt2500usb_resume(struct usb_interface *usb_intf)
if (status)
return status;
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
index 2de9201..9cee93f 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -1688,7 +1688,6 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
rt61pci_enable_led(rt2x00dev);
ieee80211_start_queues(rt2x00dev->hw);
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_WAKE);
return 0;
@@ -1704,7 +1703,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
return;
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_STOP);
ieee80211_stop_queues(rt2x00dev->hw);
/*
@@ -3190,8 +3188,6 @@ static int rt61pci_probe(struct pci_dev *pci_dev,
goto exit_free_device;
}
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
exit_free_device:
@@ -3217,7 +3213,6 @@ static void rt61pci_remove(struct pci_dev *pci_dev)
/*
* Uninitialize the 80211 stack data.
*/
- ieee80211_netif_oper(hw, NETIF_DETACH);
ieee80211_unregister_hw(hw);
/*
@@ -3249,8 +3244,6 @@ static int rt61pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
NOTICE("Going to sleep.\n");
- ieee80211_netif_oper(hw, NETIF_DETACH);
-
/*
* Disable the radio.
*/
@@ -3311,8 +3304,6 @@ static int rt61pci_resume(struct pci_dev *pci_dev)
if (status)
return status;
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
index 5a187e6..9c9fbce 100644
--- a/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -1451,7 +1451,6 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
rt73usb_enable_led(rt2x00dev);
ieee80211_start_queues(rt2x00dev->hw);
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_WAKE);
return 0;
@@ -1468,7 +1467,6 @@ static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
return;
- ieee80211_netif_oper(rt2x00dev->hw, NETIF_STOP);
ieee80211_stop_queues(rt2x00dev->hw);
/*
@@ -2819,8 +2817,6 @@ static int rt73usb_probe(struct usb_interface *usb_intf,
goto exit_free_device;
}
- ieee80211_netif_oper(hw, NETIF_ATTACH);
-
return 0;
exit_free_device:
@@ -2840,7 +2836,6 @@ static void rt73usb_disconnect(struct usb_interface *usb_intf)
/*
* Uninitialize the 80211 stack data.
*/
- ieee80211_netif_oper(hw, NETIF_DETACH);
ieee80211_unregister_hw(hw);
/*
@@ -2871,8 +2866,6 @@ static int rt73usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
NOTICE("Going to sleep.\n");
- ieee80211_netif_oper(hw, NETIF_DETACH);
-
/*
* Disable the radio.
*/
@@ -2928,7 +2921,6 @@ static int rt73usb_resume(struct usb_interface *usb_intf)
if (status)
return status;
- ieee80211_netif_oper(hw, NETIF_ATTACH);
return 0;
}
#endif /* CONFIG_PM */
reply other threads:[~2007-03-08 21:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200703082214.52070.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).