From: andy@warmcat.com
To: linux-wireless@vger.kernel.org
Subject: [PATCH 2/5] mac80211: Add radiotap support for Monitor mode RX
Date: Thu, 29 Mar 2007 14:38:16 +0100 [thread overview]
Message-ID: <20070329134040.751667935@warmcat.com> (raw)
In-Reply-To: 20070329133814.841581235@warmcat.com
Try #2
- Fix radiotap bitmap generation (Andy Green)
- Fix radiotap padding (Michael Wu)
From: Michael Wu <flamingice@sourmilk.net>
---
include/net/mac80211.h | 3 ++
net/mac80211/ieee80211.c | 67 +++++++++++++++++++++++++++++++++-------
net/mac80211/ieee80211_iface.c | 2 +
3 files changed, 59 insertions(+), 13 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 916b21b..27cffdc 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -518,6 +518,9 @@ struct ieee80211_hw {
* normal operation. */
#define IEEE80211_HW_MONITOR_DURING_OPER (1<<9)
+ /* Driver supports radiotap. */
+#define IEEE80211_HW_RADIOTAP_SUPPORTED (1<<10)
+
/* please fill this gap when adding new flags */
/* calculate Michael MIC for an MSDU when doing hwcrypto */
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 0b7cb35..6bffc29 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -8,6 +8,7 @@
*/
#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
@@ -286,6 +287,14 @@ int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
}
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
+static int ieee80211_get_radiotap_len(struct sk_buff *skb)
+{
+ struct ieee80211_radiotap_header *hdr =
+ (struct ieee80211_radiotap_header *) skb->data;
+
+ return le16_to_cpu(hdr->it_len);
+}
+
#ifdef CONFIG_MAC80211_LOWTX_FRAME_DUMP
static void ieee80211_dump_frame(const char *ifname, const char *title,
const struct sk_buff *skb)
@@ -2741,26 +2750,48 @@ ieee80211_rx_monitor(struct net_device *dev, struct sk_buff *skb,
struct ieee80211_rx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_frame_info *fi;
struct ieee80211_sub_if_data *sdata;
- const size_t hlen = sizeof(struct ieee80211_frame_info)
- - sizeof(fi->msg_type);
+ struct ieee80211_rtap_hdr {
+ struct ieee80211_radiotap_header hdr;
+ u8 flags;
+ u8 rate;
+ __le16 chan_freq;
+ __le16 chan_flags;
+ u8 antsignal;
+ } __attribute__ ((packed)) *rthdr;
skb->dev = dev;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (skb_headroom(skb) < hlen) {
- I802_DEBUG_INC(local->rx_expand_skb_head);
- if (pskb_expand_head(skb, hlen, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- return;
+ if (!(local->hw.flags & IEEE80211_HW_RADIOTAP_SUPPORTED)) {
+ if (skb_headroom(skb) < sizeof(*rthdr)) {
+ I802_DEBUG_INC(local->rx_expand_skb_head);
+ if (pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC)) {
+ dev_kfree_skb(skb);
+ return;
+ }
}
- }
- fi = (struct ieee80211_frame_info *) skb_push(skb, hlen);
+ rthdr = (struct ieee80211_rtap_hdr *) skb_push(skb, sizeof(*rthdr));
+ memset(rthdr, 0, sizeof(*rthdr));
+ rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
+ rthdr->hdr.it_present =
+ cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_RATE) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL));
+ rthdr->flags = local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS ?
+ IEEE80211_RADIOTAP_F_FCS : 0;
+ rthdr->rate = status->rate / 5;
+ rthdr->chan_freq = cpu_to_le16(status->freq);
+ rthdr->chan_flags =
+ status->phymode == MODE_IEEE80211A ?
+ cpu_to_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ) :
+ cpu_to_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ);
+ rthdr->antsignal = status->ssi;
+ }
- ieee80211_fill_frame_info(local, fi, status);
sdata->stats.rx_packets++;
sdata->stats.rx_bytes += skb->len;
@@ -3164,6 +3195,10 @@ ieee80211_rx_h_monitor(struct ieee80211_txrx_data *rx)
return TXRX_QUEUED;
}
+ if (rx->local->monitors &&
+ rx->local->hw.flags & IEEE80211_HW_RADIOTAP_SUPPORTED)
+ skb_pull(rx->skb, ieee80211_get_radiotap_len(rx->skb));
+
return TXRX_CONTINUE;
}
@@ -3731,6 +3766,13 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_txrx_data rx;
u16 type;
int multicast;
+ int radiotap_len = 0;
+
+ if (local->monitors &&
+ local->hw.flags & IEEE80211_HW_RADIOTAP_SUPPORTED) {
+ radiotap_len = ieee80211_get_radiotap_len(skb);
+ skb_pull(skb, radiotap_len);
+ }
hdr = (struct ieee80211_hdr *) skb->data;
memset(&rx, 0, sizeof(rx));
@@ -3767,6 +3809,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
goto end;
skb = rx.skb;
+ skb_push(skb, radiotap_len);
if (sta && !sta->assoc_ap && !(sta->flags & WLAN_STA_WDS) &&
!local->iff_promiscs && !multicast) {
rx.u.rx.ra_match = 1;
@@ -3775,7 +3818,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
} else {
struct ieee80211_sub_if_data *prev = NULL;
struct sk_buff *skb_new;
- u8 *bssid = ieee80211_get_bssid(hdr, skb->len);
+ u8 *bssid = ieee80211_get_bssid(hdr, skb->len - radiotap_len);
list_for_each_entry(sdata, &local->sub_if_list, list) {
rx.u.rx.ra_match = 1;
diff --git a/net/mac80211/ieee80211_iface.c b/net/mac80211/ieee80211_iface.c
index 3e0b4fa..51197b1 100644
--- a/net/mac80211/ieee80211_iface.c
+++ b/net/mac80211/ieee80211_iface.c
@@ -199,7 +199,7 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
break;
}
case IEEE80211_IF_TYPE_MNTR:
- dev->type = ARPHRD_IEEE80211_PRISM;
+ dev->type = ARPHRD_IEEE80211_RADIOTAP;
break;
default:
printk(KERN_WARNING "%s: %s: Unknown interface type 0x%x",
--
next prev parent reply other threads:[~2007-03-29 13:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-29 13:38 [PATCH 0/5] Try #6: Radiotap on Monitor Mode interfaces for rx and tx andy
2007-03-29 13:38 ` [PATCH 1/5] mac80211:Change Radiotap to little-endian (Pavel Roskin) andy
2007-03-29 13:38 ` andy [this message]
2007-03-29 13:38 ` [PATCH 3/5] mac80211: Monitor mode radiotap injection docs andy
2007-03-29 13:38 ` [PATCH 4/5] cfg80211:Radiotap parser andy
2007-03-29 13:38 ` [PATCH 5/5] mac80211: Monitor mode radiotap-based packet injection andy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070329134040.751667935@warmcat.com \
--to=andy@warmcat.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).