* BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
@ 2007-05-25 23:37 Will Dyson
2007-05-26 1:05 ` Michael Wu
2007-05-26 5:02 ` Michael Buesch
0 siblings, 2 replies; 8+ messages in thread
From: Will Dyson @ 2007-05-25 23:37 UTC (permalink / raw)
To: linux-wireless, Broadcom Linux
[-- Attachment #1: Type: text/plain, Size: 1787 bytes --]
Hi all,
First, the good news: bcm43xx-mac80211 in wireless-dev now works about
as well for me as the old driver. Similar connection reliability,
upload speed and download speed. Woo!
But I've got ton's of these in my log:
BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
Call Trace:
[<ffffffff805866a3>] ieee80211_master_start_xmit+0x5f3/0x680
[<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0
[<ffffffff804e4781>] __qdisc_run+0xd1/0x260
[<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370
[<ffffffff8058a45b>] ieee80211_subif_start_xmit+0x34b/0x590
[<ffffffff804ce3a7>] kfree_skb+0x17/0x30
[<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0
[<ffffffff804e4781>] __qdisc_run+0xd1/0x260
[<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370
[<ffffffff804f9bef>] ip_output+0x19f/0x340
[<ffffffff804f9069>] ip_queue_xmit+0x219/0x430
[<ffffffff80295fe0>] __pollwait+0x0/0x110
[<ffffffff8050a82e>] tcp_transmit_skb+0x40e/0x7c0
[<ffffffff8022ce00>] default_wake_function+0x0/0x10
[<ffffffff8050c4bb>] __tcp_push_pending_frames+0x11b/0x940
[<ffffffff8059c6a8>] csum_partial_copy_from_user+0x88/0x120
[<ffffffff80500b66>] tcp_sendmsg+0x876/0xc80
[<ffffffff8022ce0d>] default_wake_function+0xd/0x10
[<ffffffff8022ba37>] __wake_up_common+0x47/0x70
[<ffffffff8051e795>] inet_sendmsg+0x45/0x80
[<ffffffff804c7161>] sock_aio_write+0x101/0x110
[<ffffffff80286071>] do_sync_write+0xf1/0x130
[<ffffffff80246f80>] autoremove_wake_function+0x0/0x40
[<ffffffff8023688e>] current_fs_time+0x3e/0x40
[<ffffffff80286999>] vfs_write+0x159/0x170
[<ffffffff80286fa0>] sys_write+0x50/0x90
[<ffffffff8020a1ae>] system_call+0x7e/0x83
Kernel: wireless-dev latest from git
Arch: x86-64
My boot log is attached for full hardware information.
--
Will Dyson
[-- Attachment #2: bootlog.txt --]
[-- Type: text/plain, Size: 36482 bytes --]
[ 0.000000] Linux version 2.6.22-rc2-wifidev0 (will@zod) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 PREEMPT Tue May 22 21:42:43 EDT 2007
[ 0.000000] Command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F8FA0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT BFFF3180, 48C1 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS BFFF0000, 0040
[ 0.000000] ACPI: SSDT BFFF7B80, 00B5 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: SRAT BFFF7C80, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: APIC BFFF7AC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786416
[ 0.000000] On node 0 totalpages: 786319
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1510 pages reserved
[ 0.000000] DMA zone: 2433 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 771625 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
[ 0.000000] Built 1 zonelists. Total pages: 774058
[ 0.000000] Kernel command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 31.075884] time.c: Detected 1808.831 MHz processor.
[ 31.076920] Console: colour VGA+ 80x25
[ 31.081178] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 31.085085] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 31.086413] Checking aperture...
[ 31.086449] CPU 0: aperture @ f0000000 size 128 MB
[ 31.118310] Memory: 3089632k/3145664k available (3723k kernel code, 55316k reserved, 1581k data, 204k init)
[ 31.177835] Calibrating delay using timer specific routine.. 3618.69 BogoMIPS (lpj=1809346)
[ 31.177945] Mount-cache hash table entries: 256
[ 31.178085] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 31.178121] CPU: L2 Cache: 512K (64 bytes/line)
[ 31.178164] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[ 31.178250] ACPI: Core revision 20070126
[ 31.192208] Using local APIC timer interrupts.
[ 31.247516] result 12561331
[ 31.247548] Detected 12.561 MHz APIC timer.
[ 31.247925] NET: Registered protocol family 16
[ 31.248052] No dock devices found.
[ 31.248147] ACPI: bus type pci registered
[ 31.248188] PCI: Using configuration type 1
[ 31.253257] ACPI: Interpreter enabled
[ 31.253294] ACPI: (supports S0 S1 S4 S5)
[ 31.253450] ACPI: Using IOAPIC for interrupt routing
[ 31.263052] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 31.263093] PCI: Probing PCI hardware (bus 00)
[ 31.263690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 31.263880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 31.264215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 31.321009] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 31.321488] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 31.321968] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 31.322495] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 31.322974] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 31.323451] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 31.323929] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 31.324405] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 31.324883] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 31.325410] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 31.325893] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 31.326371] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 31.326850] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 31.327326] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 31.327855] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 31.328382] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 31.328920] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 31.329409] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 31.329917] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 31.330232] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 31.330546] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 31.330887] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 31.331146] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 31.331446] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 31.331835] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
[ 31.332221] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 31.332606] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[ 31.333017] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 31.333403] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 31.333790] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 31.334176] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 31.334561] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 31.334973] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[ 31.335381] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 31.335799] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 31.336193] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 31.336515] ACPI: Power Resource [ISAV] (on)
[ 31.336564] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.336607] pnp: PnP ACPI init
[ 31.336646] ACPI: bus type pnp registered
[ 31.341119] pnp: PnP ACPI: found 12 devices
[ 31.341154] ACPI: ACPI bus type pnp unregistered
[ 31.341221] Generic PHY: Registered new driver
[ 31.341337] SCSI subsystem initialized
[ 31.341392] libata version 2.20 loaded.
[ 31.341440] usbcore: registered new interface driver usbfs
[ 31.341499] usbcore: registered new interface driver hub
[ 31.341559] usbcore: registered new device driver usb
[ 31.341632] PCI: Using ACPI for IRQ routing
[ 31.341668] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.341720] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 31.341857] agpgart: Detected AGP bridge 0
[ 31.341894] agpgart: Setting up Nforce3 AGP.
[ 31.346221] agpgart: AGP aperture is 128M @ 0xf0000000
[ 31.346322] ACPI: RTC can wake from S4
[ 31.346381] pnp: 00:00: ioport range 0x4000-0x407f has been reserved
[ 31.346417] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 31.346454] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 31.346490] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
[ 31.346526] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[ 31.346562] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[ 31.346602] pnp: 00:01: iomem range 0xd0000-0xd3fff has been reserved
[ 31.346638] pnp: 00:01: iomem range 0xd5000-0xd7fff has been reserved
[ 31.346674] pnp: 00:01: iomem range 0xf0000-0xfbfff could not be reserved
[ 31.346710] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
[ 31.346771] Time: tsc clocksource has been installed.
[ 31.347336] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 31.347377] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 31.400642] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 31.407768] PCI: Bridge: 0000:00:0b.0
[ 31.407803] IO window: 9000-9fff
[ 31.407838] MEM window: fdf00000-fdffffff
[ 31.407874] PREFETCH window: e0000000-efffffff
[ 31.407911] PCI: Bridge: 0000:00:0e.0
[ 31.407945] IO window: 8000-8fff
[ 31.407979] MEM window: fde00000-fdefffff
[ 31.408013] PREFETCH window: fdd00000-fddfffff
[ 31.408053] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 31.408078] NET: Registered protocol family 2
[ 31.416773] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 31.417480] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 31.421146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 31.421660] TCP: Hash tables configured (established 262144 bind 65536)
[ 31.421697] TCP reno registered
[ 31.425313] Total HugeTLB memory allocated, 0
[ 31.425508] io scheduler noop registered
[ 31.425542] io scheduler anticipatory registered (default)
[ 31.425586] io scheduler cfq registered
[ 31.469745] Boot video device is 0000:01:00.0
[ 31.470119] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 31.470161] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[ 31.470298] radeonfb: Found Intel x86 BIOS ROM Image
[ 31.470334] radeonfb: Retrieved PLL infos from BIOS
[ 31.470370] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
[ 31.470415] radeonfb: PLL min 20000 max 40000
[ 31.759268] i2c-adapter i2c-2: unable to read EDID block.
[ 31.878225] i2c-adapter i2c-2: unable to read EDID block.
[ 31.997181] i2c-adapter i2c-2: unable to read EDID block.
[ 32.116250] i2c-adapter i2c-3: unable to read EDID block.
[ 32.235206] i2c-adapter i2c-3: unable to read EDID block.
[ 32.354162] i2c-adapter i2c-3: unable to read EDID block.
[ 32.397399] radeonfb: Monitor 1 type DFP found
[ 32.397433] radeonfb: EDID probed
[ 32.397465] radeonfb: Monitor 2 type no found
[ 32.429101] Console: switching to colour frame buffer device 160x64
[ 32.453039] mtrr: base(0xe8000000) is not aligned on a size(0x10000000) boundary
[ 32.453234] radeonfb (0000:01:00.0): ATI Radeon Ya
[ 32.453471] input: Power Button (FF) as /class/input/input0
[ 32.453624] ACPI: Power Button (FF) [PWRF]
[ 32.453785] input: Power Button (CM) as /class/input/input1
[ 32.453936] ACPI: Power Button (CM) [PWRB]
[ 32.482998] Real Time Clock Driver v1.12ac
[ 32.483205] Linux agpgart interface v0.102 (c) Dave Jones
[ 32.483385] [drm] Initialized drm 1.1.0 20060810
[ 32.483629] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 32.483798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 32.484553] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.549440] loop: module loaded
[ 34.559694] Marvell 88E1101: Registered new driver
[ 34.571650] Marvell 88E1111: Registered new driver
[ 34.583513] Marvell 88E1145: Registered new driver
[ 34.595253] QS6612: Registered new driver
[ 34.606337] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 34.621427] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 34.634487] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) -> IRQ 23
[ 34.650877] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 34.842588] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00006c260b]
[ 35.162601] eth0: forcedeth.c: subsystem: 01462:0250 bound to 0000:00:05.0
[ 35.177206] tun: Universal TUN/TAP device driver, 1.6
[ 35.189980] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 35.204060] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 35.217697] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 35.231407] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[ 35.248344] eth1: RTL8169s/8110s at 0xffffc20000014000, 00:11:09:8f:4b:52, IRQ 16
[ 35.267157] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.281629] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 35.297723] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 35.311694] NFORCE3-250: chipset revision 162
[ 35.323939] NFORCE3-250: not 100% native mode: will probe irqs later
[ 35.338316] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 35.352440] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
[ 35.367826] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
[ 35.383190] Probing IDE interface ide0...
[ 36.054129] hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive
[ 36.374065] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 36.388205] Probing IDE interface ide1...
[ 36.906783] Probing IDE interface ide1...
[ 37.426208] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 37.442064] Uniform CD-ROM driver Revision: 3.20
[ 37.455887] sata_nv 0000:00:09.0: version 3.3
[ 37.456273] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[ 37.470259] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22
[ 37.487460] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 37.487504] scsi0 : sata_nv
[ 37.498639] scsi1 : sata_nv
[ 37.509670] ata1: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 0
[ 37.528385] ata2: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 0
[ 38.000352] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 38.034729] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 38.051028] ata1.00: ATA-6: WDC WD1600SD-01KCB0, 08.02D08, max UDMA/133
[ 38.066313] ata1.00: 312581808 sectors, multi 16: LBA48
[ 38.085672] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 38.101900] ata1.00: configured for UDMA/133
[ 38.568143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 38.586156] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752
[ 38.602433] ata2.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
[ 38.617284] ata2.00: 490234752 sectors, multi 16: LBA48 NCQ (not used)
[ 38.637151] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752
[ 38.653703] ata2.00: configured for UDMA/133
[ 38.667032] scsi 0:0:0:0: Direct-Access ATA WDC WD1600SD-01K 08.0 PQ: 0 ANSI: 5
[ 38.684453] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.700994] sd 0:0:0:0: [sda] Write Protect is off
[ 38.715135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.715147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.733781] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.750536] sd 0:0:0:0: [sda] Write Protect is off
[ 38.764888] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.764900] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.783597] sda: sda1 sda2 sda3
[ 38.812893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 38.827153] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 38.842119] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
[ 38.860002] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
[ 38.876940] sd 1:0:0:0: [sdb] Write Protect is off
[ 38.891510] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.891522] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.910518] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
[ 38.927613] sd 1:0:0:0: [sdb] Write Protect is off
[ 38.942343] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.942355] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.961431] sdb: sdb1 sdb2 sdb3
[ 38.995056] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 39.009640] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 39.025325] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 39.041110] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 21 (level, high) -> IRQ 21
[ 39.060258] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 39.060288] scsi2 : sata_nv
[ 39.073379] scsi3 : sata_nv
[ 39.086327] ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001b000 irq 0
[ 39.106864] ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001b008 irq 0
[ 39.429826] ata3: SATA link down (SStatus 0 SControl 300)
[ 39.747708] ata4: SATA link down (SStatus 0 SControl 300)
[ 39.763457] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 39.779205] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20
[ 39.798177] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 39.798181] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 39.813603] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 39.831174] ehci_hcd 0000:00:02.2: debug port 1
[ 39.845724] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 39.845733] ehci_hcd 0000:00:02.2: irq 20, io mem 0xfe02d000
[ 39.861338] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 39.878890] usb usb1: configuration #1 chosen from 1 choice
[ 39.894360] hub 1-0:1.0: USB hub found
[ 39.907984] hub 1-0:1.0: 8 ports detected
[ 40.022675] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 40.022989] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 40.038592] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, high) -> IRQ 23
[ 40.057390] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 40.057393] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 40.072709] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 40.090167] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 40.158646] usb usb2: configuration #1 chosen from 1 choice
[ 40.174160] hub 2-0:1.0: USB hub found
[ 40.187779] hub 2-0:1.0: 4 ports detected
[ 40.302835] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[ 40.318338] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 22
[ 40.336969] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 40.336972] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 40.352149] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 40.369387] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 40.437541] usb usb3: configuration #1 chosen from 1 choice
[ 40.452887] hub 3-0:1.0: USB hub found
[ 40.466327] hub 3-0:1.0: 4 ports detected
[ 40.874297] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 41.085446] usb 2-3: configuration #1 chosen from 1 choice
[ 41.363118] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 41.570293] usb 3-3: configuration #1 chosen from 1 choice
[ 41.587303] usbcore: registered new interface driver libusual
[ 41.602751] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 41.618547] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 41.885260] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 41.899883] mice: PS/2 mouse device common for all mice
[ 41.914783] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 41.930421] rtc_cmos: probe of 00:05 failed with error -16
[ 41.945341] i2c /dev entries driver
[ 41.958452] usbcore: registered new interface driver hiddev
[ 41.980308] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 41.996537] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-3
[ 42.014720] usbcore: registered new interface driver usbhid
[ 42.029692] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 42.045348] Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16 09:45:46 2007 UTC).
[ 42.064212] input: AT Translated Set 2 keyboard as /class/input/input3
[ 42.080413] ALSA device list:
[ 42.092893] No soundcards found.
[ 42.105734] IPv4 over IPv4 tunneling driver
[ 42.119382] GRE over IPv4 tunneling driver
[ 42.132825] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 42.147404] TCP cubic registered
[ 42.159838] Initializing XFRM netlink socket
[ 42.173252] NET: Registered protocol family 1
[ 42.186622] NET: Registered protocol family 10
[ 42.200022] lo: Disabled Privacy Extensions
[ 42.213133] tunl0: Disabled Privacy Extensions
[ 42.226456] IPv6 over IPv4 tunneling driver
[ 42.239456] sit0: Disabled Privacy Extensions
[ 42.252429] NET: Registered protocol family 17
[ 42.265559] NET: Registered protocol family 15
[ 42.278484] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[ 42.295914] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 42.310052] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 42.324499] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 42.359493] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 42.375224] ReiserFS: sda2: using ordered data mode
[ 42.390775] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 42.424801] ReiserFS: sda2: checking transaction log (sda2)
[ 42.472400] ReiserFS: sda2: Using r5 hash to sort names
[ 42.486657] VFS: Mounted root (reiserfs filesystem) readonly.
[ 42.501437] Freeing unused kernel memory: 204k freed
[ 45.632106] i2c-adapter i2c-4: nForce2 SMBus adapter at 0x4c00
[ 45.647000] i2c-adapter i2c-5: nForce2 SMBus adapter at 0x4c40
[ 45.720888] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 45.735768] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 21
[ 45.753883] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 45.880576] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 45.900990] usbcore: registered new interface driver usblp
[ 45.916052] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 45.989535] parport_pc 00:0a: reported by Plug and Play ACPI
[ 46.004712] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 46.140509] intel8x0_measure_ac97_clock: measured 50715 usecs
[ 46.155762] intel8x0: clocking to 46814
[ 46.284556] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 46.299793] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 46.318250] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[ 46.335079] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 46.351980] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[ 46.368386] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 46.384510] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[ 46.400559] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 46.417316] ssb: Ignoring additional 802.11 core
[ 46.434678] ssb: Switching to PCI core, index 4
[ 46.448692] ssb: Sonics Silicon Backplane found on PCI device 0000:02:07.0
[ 46.465130] bcm43xx_mac80211: Broadcom 4306 WLAN found
[ 46.479787] ssb: Switching to IEEE 802.11 core, index 1
[ 46.501268] bcm43xx_mac80211: Found PHY: Analog 1, Type 2, Revision 1
[ 46.517334] bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 46.541260] bcm43xx_mac80211: Radio turned off
[ 46.555449] wmaster0: Selected rate control algorithm 'simple'
[ 47.074260] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 56.413386] w83627hf: Found W83627THF chip at 0x290
[ 56.429428] w83627hf w83627hf.656: Reading VID from GPIO5
[ 56.551910] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 57.003895] md: bind<sdb3>
[ 57.045167] md: raid1 personality registered for level 1
[ 57.061317] raid1: raid set md1 active with 1 out of 2 mirrors
[ 57.103692] md: bind<sdb1>
[ 57.121320] raid1: raid set md0 active with 1 out of 2 mirrors
[ 58.142249] fuse init (API version 7.8)
[ 58.195209] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 58.195222] ReiserFS: sda3: using ordered data mode
[ 58.220745] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 58.222426] ReiserFS: sda3: checking transaction log (sda3)
[ 58.286751] ReiserFS: sda3: Using r5 hash to sort names
[ 58.327342] kjournald starting. Commit interval 5 seconds
[ 58.327796] EXT3 FS on sdb2, internal journal
[ 58.327800] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.387473] kjournald starting. Commit interval 5 seconds
[ 58.420715] EXT3 FS on dm-2, internal journal
[ 58.420719] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.469210] kjournald starting. Commit interval 5 seconds
[ 58.475009] EXT3 FS on dm-1, internal journal
[ 58.475013] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.503126] Adding 1048568k swap on /dev/vg0/swap. Priority:-1 extents:1 across:1048568k
[ 60.729470] bcm43xx_mac80211: Adding Interface type 2
[ 60.744090] ssb: Switching to PCI core, index 4
[ 60.744095] ssb: Switching to IEEE 802.11 core, index 1
[ 61.036718] bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 61.036727] ssb: Switching to ChipCommon core, index 0
[ 61.036734] ssb: Switching to IEEE 802.11 core, index 1
[ 61.044914] bcm43xx_mac80211: Radio turned on
[ 61.044917] bcm43xx_mac80211: Radio enabled by hardware
[ 61.062801] bcm43xx_mac80211: Chip initialized
[ 61.063091] bcm43xx_mac80211: 30-bit DMA initialized
[ 61.063124] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063129] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063132] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063137] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063141] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063145] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063149] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063154] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063157] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063162] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063166] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063170] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063174] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063179] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063182] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.063187] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724
[ 61.080373] bcm43xx_mac80211: Wireless interface started
[ 61.084329] HW CONFIG: channel=1 freq=2412 phymode=3
[ 61.095127] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 62.235543] HW CONFIG: channel=1 freq=2412 phymode=3
[ 62.304515] HW CONFIG: channel=2 freq=2417 phymode=3
[ 62.381486] HW CONFIG: channel=3 freq=2422 phymode=3
[ 62.458461] HW CONFIG: channel=4 freq=2427 phymode=3
[ 62.535433] HW CONFIG: channel=5 freq=2432 phymode=3
[ 62.612403] HW CONFIG: channel=6 freq=2437 phymode=3
[ 62.689375] HW CONFIG: channel=7 freq=2442 phymode=3
[ 62.766344] HW CONFIG: channel=8 freq=2447 phymode=3
[ 62.843316] HW CONFIG: channel=9 freq=2452 phymode=3
[ 62.920288] HW CONFIG: channel=10 freq=2457 phymode=3
[ 62.997260] HW CONFIG: channel=11 freq=2462 phymode=3
[ 63.074232] HW CONFIG: channel=1 freq=2412 phymode=3
[ 63.082479] HW CONFIG: channel=11 freq=2462 phymode=3
[ 63.090539] wlan0: Initial auth_alg=0
[ 63.090543] wlan0: authenticate with AP 00:0d:0b:fd:86:39
[ 63.092108] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0)
[ 63.092112] wlan0: authenticated
[ 63.092115] wlan0: associate with AP 00:0d:0b:fd:86:39
[ 63.096462] wlan0: RX AssocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2)
[ 63.096466] wlan0: associated
[ 63.096486] wmaster0: Added STA 00:0d:0b:fd:86:39
[ 63.099206] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 67.053817] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15)
[ 67.053821] wlan0: deauthenticated
[ 68.053420] wlan0: authenticate with AP 00:0d:0b:fd:86:39
[ 68.054958] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0)
[ 68.054961] wlan0: authenticated
[ 68.054964] wlan0: associate with AP 00:0d:0b:fd:86:39
[ 68.057426] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2)
[ 68.057428] wlan0: associated
[ 68.087407] HW CONFIG: channel=1 freq=2412 phymode=3
[ 68.164377] HW CONFIG: channel=2 freq=2417 phymode=3
[ 68.241349] HW CONFIG: channel=3 freq=2422 phymode=3
[ 68.318321] HW CONFIG: channel=4 freq=2427 phymode=3
[ 68.395293] HW CONFIG: channel=5 freq=2432 phymode=3
[ 68.472265] HW CONFIG: channel=6 freq=2437 phymode=3
[ 68.549237] HW CONFIG: channel=7 freq=2442 phymode=3
[ 68.626209] HW CONFIG: channel=8 freq=2447 phymode=3
[ 68.703180] HW CONFIG: channel=9 freq=2452 phymode=3
[ 68.780152] HW CONFIG: channel=10 freq=2457 phymode=3
[ 68.857125] HW CONFIG: channel=11 freq=2462 phymode=3
[ 68.934097] HW CONFIG: channel=11 freq=2462 phymode=3
[ 72.021951] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15)
[ 72.021954] wlan0: deauthenticated
[ 73.020611] wlan0: authenticate with AP 00:0d:0b:fd:86:39
[ 73.022204] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0)
[ 73.022207] wlan0: authenticated
[ 73.022210] wlan0: associate with AP 00:0d:0b:fd:86:39
[ 73.025177] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2)
[ 73.025180] wlan0: associated
[ 73.054598] HW CONFIG: channel=1 freq=2412 phymode=3
[ 73.131567] HW CONFIG: channel=2 freq=2417 phymode=3
[ 73.208539] HW CONFIG: channel=3 freq=2422 phymode=3
[ 73.285511] HW CONFIG: channel=4 freq=2427 phymode=3
[ 73.362483] HW CONFIG: channel=5 freq=2432 phymode=3
[ 73.439455] HW CONFIG: channel=6 freq=2437 phymode=3
[ 73.516427] HW CONFIG: channel=7 freq=2442 phymode=3
[ 73.593399] HW CONFIG: channel=8 freq=2447 phymode=3
[ 73.670371] HW CONFIG: channel=9 freq=2452 phymode=3
[ 73.747342] HW CONFIG: channel=10 freq=2457 phymode=3
[ 73.824315] HW CONFIG: channel=11 freq=2462 phymode=3
[ 73.901287] HW CONFIG: channel=11 freq=2462 phymode=3
[ 74.153194] wlan0: no IPv6 routers present
[ 76.982900] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15)
[ 76.982903] wlan0: deauthenticated
[ 77.981802] wlan0: authenticate with AP 00:0d:0b:fd:86:39
[ 77.994011] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0)
[ 77.994014] wlan0: authenticated
[ 77.994016] wlan0: associate with AP 00:0d:0b:fd:86:39
[ 77.996499] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2)
[ 77.996502] wlan0: associated
[ 78.025787] HW CONFIG: channel=1 freq=2412 phymode=3
[ 78.102755] HW CONFIG: channel=2 freq=2417 phymode=3
[ 78.179727] HW CONFIG: channel=3 freq=2422 phymode=3
[ 78.256699] HW CONFIG: channel=4 freq=2427 phymode=3
[ 78.333672] HW CONFIG: channel=5 freq=2432 phymode=3
[ 78.410643] HW CONFIG: channel=6 freq=2437 phymode=3
[ 78.487615] HW CONFIG: channel=7 freq=2442 phymode=3
[ 78.564587] HW CONFIG: channel=8 freq=2447 phymode=3
[ 78.641559] HW CONFIG: channel=9 freq=2452 phymode=3
[ 78.718531] HW CONFIG: channel=10 freq=2457 phymode=3
[ 78.795503] HW CONFIG: channel=11 freq=2462 phymode=3
[ 78.872476] HW CONFIG: channel=11 freq=2462 phymode=3
[ 78.995129] bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: 00:0d:0b:fd:86:39
[ 89.404270] ppdev: user-space parallel port driver
[ 94.598972] Marking TSC unstable due to cpufreq changes
[ 94.599379] Time: acpi_pm clocksource has been installed.
[ 99.840547] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 99.840623] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 99.840660] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 99.991649] [drm] Setting GART location based on new memory map
[ 99.991656] [drm] Loading R200 Microcode
[ 99.991684] [drm] writeback test succeeded in 1 usecs
[ 111.311440] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 262 (2620/10)
[ 152.460495] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 24 (265/11)
[ 187.232837] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 10 (10/1)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-25 23:37 BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx() Will Dyson
@ 2007-05-26 1:05 ` Michael Wu
2007-05-26 4:10 ` Will Dyson
2007-05-26 5:02 ` Michael Buesch
1 sibling, 1 reply; 8+ messages in thread
From: Michael Wu @ 2007-05-26 1:05 UTC (permalink / raw)
To: Will Dyson; +Cc: linux-wireless, Broadcom Linux, Jiri Benc
[-- Attachment #1: Type: text/plain, Size: 495 bytes --]
On Friday 25 May 2007 16:37, Will Dyson wrote:
> But I've got ton's of these in my log:
>
> BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
>
Do you have CONFIG_NET_SCHED on?
If you do, can you check what qdisc is attached to the master device? This
command should do it if you only have one mac80211 device on your system:
tc qdisc show dev wmaster0
I suspect the patch that made mac80211 work without the ieee80211 qdisc might
not be working correctly.
-Michael Wu
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-26 1:05 ` Michael Wu
@ 2007-05-26 4:10 ` Will Dyson
2007-05-26 5:24 ` Michael Wu
0 siblings, 1 reply; 8+ messages in thread
From: Will Dyson @ 2007-05-26 4:10 UTC (permalink / raw)
To: Michael Wu; +Cc: linux-wireless, Broadcom Linux, Jiri Benc
On 5/25/07, Michael Wu <flamingice@sourmilk.net> wrote:
> On Friday 25 May 2007 16:37, Will Dyson wrote:
> > But I've got ton's of these in my log:
> >
> > BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
> >
> Do you have CONFIG_NET_SCHED on?
I do not have it set in this kernel. Should I?
--
Will Dyson
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-25 23:37 BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx() Will Dyson
2007-05-26 1:05 ` Michael Wu
@ 2007-05-26 5:02 ` Michael Buesch
1 sibling, 0 replies; 8+ messages in thread
From: Michael Buesch @ 2007-05-26 5:02 UTC (permalink / raw)
To: bcm43xx-dev; +Cc: Will Dyson, linux-wireless
On Saturday 26 May 2007 01:37, Will Dyson wrote:
> Hi all,
>
> First, the good news: bcm43xx-mac80211 in wireless-dev now works about
> as well for me as the old driver. Similar connection reliability,
> upload speed and download speed. Woo!
Whoo, nice. :)
/me pours a bottle of beer to everybody on the list.
> But I've got ton's of these in my log:
>
> BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
Hm, probably mac80211 bug. Not sure. I didn't look at the code, yet.
> Call Trace:
> [<ffffffff805866a3>] ieee80211_master_start_xmit+0x5f3/0x680
> [<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0
> [<ffffffff804e4781>] __qdisc_run+0xd1/0x260
> [<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370
> [<ffffffff8058a45b>] ieee80211_subif_start_xmit+0x34b/0x590
> [<ffffffff804ce3a7>] kfree_skb+0x17/0x30
> [<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0
> [<ffffffff804e4781>] __qdisc_run+0xd1/0x260
> [<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370
> [<ffffffff804f9bef>] ip_output+0x19f/0x340
> [<ffffffff804f9069>] ip_queue_xmit+0x219/0x430
> [<ffffffff80295fe0>] __pollwait+0x0/0x110
> [<ffffffff8050a82e>] tcp_transmit_skb+0x40e/0x7c0
> [<ffffffff8022ce00>] default_wake_function+0x0/0x10
> [<ffffffff8050c4bb>] __tcp_push_pending_frames+0x11b/0x940
> [<ffffffff8059c6a8>] csum_partial_copy_from_user+0x88/0x120
> [<ffffffff80500b66>] tcp_sendmsg+0x876/0xc80
> [<ffffffff8022ce0d>] default_wake_function+0xd/0x10
> [<ffffffff8022ba37>] __wake_up_common+0x47/0x70
> [<ffffffff8051e795>] inet_sendmsg+0x45/0x80
> [<ffffffff804c7161>] sock_aio_write+0x101/0x110
> [<ffffffff80286071>] do_sync_write+0xf1/0x130
> [<ffffffff80246f80>] autoremove_wake_function+0x0/0x40
> [<ffffffff8023688e>] current_fs_time+0x3e/0x40
> [<ffffffff80286999>] vfs_write+0x159/0x170
> [<ffffffff80286fa0>] sys_write+0x50/0x90
> [<ffffffff8020a1ae>] system_call+0x7e/0x83
>
> Kernel: wireless-dev latest from git
> Arch: x86-64
>
> My boot log is attached for full hardware information.
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-26 4:10 ` Will Dyson
@ 2007-05-26 5:24 ` Michael Wu
2007-05-26 15:51 ` Will Dyson
0 siblings, 1 reply; 8+ messages in thread
From: Michael Wu @ 2007-05-26 5:24 UTC (permalink / raw)
To: Will Dyson; +Cc: linux-wireless, Broadcom Linux, Jiri Benc
[-- Attachment #1: Type: text/plain, Size: 515 bytes --]
On Friday 25 May 2007 21:10, Will Dyson wrote:
> On 5/25/07, Michael Wu <flamingice@sourmilk.net> wrote:
> > On Friday 25 May 2007 16:37, Will Dyson wrote:
> > > But I've got ton's of these in my log:
> > >
> > > BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
> >
> > Do you have CONFIG_NET_SCHED on?
>
> I do not have it set in this kernel. Should I?
It may help. mac80211 didn't work correctly without it before and I'm not
entirely sure if it works correctly now without that.
-Michael Wu
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-26 5:24 ` Michael Wu
@ 2007-05-26 15:51 ` Will Dyson
2007-06-03 19:34 ` Will Dyson
0 siblings, 1 reply; 8+ messages in thread
From: Will Dyson @ 2007-05-26 15:51 UTC (permalink / raw)
To: Michael Wu; +Cc: linux-wireless, Broadcom Linux, Jiri Benc
On 5/26/07, Michael Wu <flamingice@sourmilk.net> wrote:
> On Friday 25 May 2007 21:10, Will Dyson wrote:
> > On 5/25/07, Michael Wu <flamingice@sourmilk.net> wrote:
> > > On Friday 25 May 2007 16:37, Will Dyson wrote:
> > > > But I've got ton's of these in my log:
> > > >
> > > > BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
> > >
> > > Do you have CONFIG_NET_SCHED on?
> >
> > I do not have it set in this kernel. Should I?
> It may help. mac80211 didn't work correctly without it before and I'm not
> entirely sure if it works correctly now without that.
Ok. I'll try it.
For what it's worth, I can no-longer reproduce this error (although it
was reproducible across several reboots yesterday).
--
Will Dyson
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-05-26 15:51 ` Will Dyson
@ 2007-06-03 19:34 ` Will Dyson
2007-06-04 11:03 ` Johannes Berg
0 siblings, 1 reply; 8+ messages in thread
From: Will Dyson @ 2007-06-03 19:34 UTC (permalink / raw)
To: Michael Wu; +Cc: linux-wireless, Broadcom Linux, Jiri Benc
On 5/26/07, Will Dyson <will.dyson@gmail.com> wrote:
> On 5/26/07, Michael Wu <flamingice@sourmilk.net> wrote:
> > On Friday 25 May 2007 21:10, Will Dyson wrote:
> > > On 5/25/07, Michael Wu <flamingice@sourmilk.net> wrote:
> > > > On Friday 25 May 2007 16:37, Will Dyson wrote:
> > > > > But I've got ton's of these in my log:
> > > > >
> > > > > BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
> > > >
> > > > Do you have CONFIG_NET_SCHED on?
> > >
> > > I do not have it set in this kernel. Should I?
> > It may help. mac80211 didn't work correctly without it before and I'm not
> > entirely sure if it works correctly now without that.
>
> Ok. I'll try it.
>
> For what it's worth, I can no-longer reproduce this error (although it
> was reproducible across several reboots yesterday).
Followup:
The warning did eventually show up again in the kernel without
CONFIG_NET_SCHED. Runing a week with CONFIG_NET_SCHED without a
recurrence. So that seems to have solved it.
If mac80211 needs CONFIG_NET_SCHED, shouldn't mac80211 select or depend on it?
--
Will Dyson
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx()
2007-06-03 19:34 ` Will Dyson
@ 2007-06-04 11:03 ` Johannes Berg
0 siblings, 0 replies; 8+ messages in thread
From: Johannes Berg @ 2007-06-04 11:03 UTC (permalink / raw)
To: Will Dyson; +Cc: Michael Wu, Jiri Benc, linux-wireless, Broadcom Linux
[-- Attachment #1: Type: text/plain, Size: 370 bytes --]
On Sun, 2007-06-03 at 15:34 -0400, Will Dyson wrote:
> The warning did eventually show up again in the kernel without
> CONFIG_NET_SCHED. Runing a week with CONFIG_NET_SCHED without a
> recurrence. So that seems to have solved it.
>
> If mac80211 needs CONFIG_NET_SCHED, shouldn't mac80211 select or depend on it?
It's supposed to not need it ;)
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-06-04 11:03 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-25 23:37 BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx() Will Dyson
2007-05-26 1:05 ` Michael Wu
2007-05-26 4:10 ` Will Dyson
2007-05-26 5:24 ` Michael Wu
2007-05-26 15:51 ` Will Dyson
2007-06-03 19:34 ` Will Dyson
2007-06-04 11:03 ` Johannes Berg
2007-05-26 5:02 ` Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).