Re: b44: regression in 2.6.22 (resend)

[Maximilian Engelhardt <maxi@daemonizer.de>]

[-- Attachment #1: Type: text/plain, Size: 1383 bytes --]

On Monday 28 May 2007, Thomas Gleixner wrote:
> On Mon, 2007-05-28 at 19:44 +0200, Maximilian Engelhardt wrote:
> > > Can you please keep CONFIG_HIGH_RES_TIMERS and CONFIG_NOHZ and try the
> > > following combinations on the kernel command line:
> > >
> > > 1) highres=off nohz=off (should be the same as your working config)
> > > 2) highres=off
> > > 3) nohz=off
> >
> > I tested this with my 2.6.22-rc3 kernel, here are the results:
> >
> > without any special boot parameters: problem does appear
> > highres=off nohz=off: problem does not appear
> > highres=off: problem does not appear
> > nohz=off: problem does appear
>
> Is there any other strange behavior of the high res enabled kernel than
> the b44 problem ?

I didn't notice anything in the past (as I wrote). But today I did some tests 
for an updated version of the p54 mac80211 wlan driver and I noticed exactly 
the same problem:

when booting with highres=off everything is fine.
But when I boot an highres enabled kernel and I do the iperf-test with the p54 
driver, my systems becomes unresponsive during the test. It seems to be 
exactly the same problem I have with the b44 driver.
So this might not be a bug in the b44 code but a bug somewhere in the linux 
networking code.

I did the test with an 2.6.22-rc3-git4 kernel and the p54 driver built 
external as module. 

Maxi

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]