From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, rt2400-devel@lists.sourceforge.net
Subject: Please pull 'upstream' branch of rt2x00
Date: Wed, 25 Jul 2007 22:49:47 +0200 [thread overview]
Message-ID: <200707252249.47931.IvDoorn@gmail.com> (raw)
Hi John,
Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes
regarding the USB ID and the rt61pci interrupts.
The latter one (hopefully) resolves an bugreport recently
raised in the Fedora Bugzilla. (I'll update the report in a few seconds)
And yes I have read the mails of today regarding patch submissions,
so I'll start sending the individual patches as well along with this pull request. ;)
Short note about the state of rt2x00:
- Code cleaning is progressing, next version will probably contain
the result of Lindent run. But after that I don't expect big changes regarding
code style.
- Writing "Magical" values to the registers has been reduced as much as possible,
most values that are still magical are really magic and I have no clue on what they
exactly mean, except that those values should be written. ;)
- Suspend/resume is completely broken. I am not sure how the device should
correctly suspend/resume. Most important points on this area are
deregistering/registering ieee80211_hw and reassociation after resume.
I am gathering some more info on this, and will post a bigger report on the mailinglist
in a few days.
- Statistics reading. Noise and Signal are still empty...
It would really be nice to have some value to report for these statistics.
- Bug reports show definite progress, rt2x00 doesn't really seem to break things,
but neither is it doing a usefull things...
Ivo
---
The following changes since commit 9cc4f5142dd983d178b158e782d5e60900e48270:
Michael Wu (1):
mac80211: use more GFP_KERNEL instead of GFP_ATOMIC
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: Don't export unneeded symbols
Ivo van Doorn (13):
rt2x00: Check permissions on debugfs write
Merge branch 'wireless-dev'
rt2x00: Use rts_cts_rate for CTS frames
rt2x00: Cleanup allocation/initialization
rt2x00: rt61pci interrupts are called on MCU CMD done
rt2x00: Reduce requirement for debugfs wrapper functions
rt2x00: Don't toggle promisc mode in link_tuner
rt2x00: Fix MAC address initialization for multiple interfaces
Merge branch 'wireless-dev'
rt2x00: Check for all errors on RXdone
rt2x00: Parse chipset revision for RT chip validation
rt2x00: Release 2.0.4
Merge branch 'wireless-dev'
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 83 +--
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 90 +---
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 105 ++---
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 17 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 237 +++------
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 27 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 560 ++++++++++----------
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 57 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 58 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 126 +++--
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 99 ++---
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 100 ++---
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 2 +-
19 files changed, 731 insertions(+), 842 deletions(-)
next reply other threads:[~2007-07-25 20:48 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-25 20:49 Ivo van Doorn [this message]
2007-07-26 2:19 ` [Rt2400-devel] Please pull 'upstream' branch of rt2x00 John W. Linville
2007-07-26 21:22 ` Ivo van Doorn
-- strict thread matches above, loose matches on Subject: below --
2008-12-20 9:52 Ivo van Doorn
2008-12-02 17:19 Ivo van Doorn
2008-10-29 16:16 Ivo van Doorn
2008-08-29 19:03 Ivo van Doorn
2008-08-04 14:36 Ivo van Doorn
2008-07-19 14:15 Ivo van Doorn
2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
2008-06-16 17:58 Ivo van Doorn
2008-06-08 21:41 Ivo van Doorn
2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
2008-05-05 15:23 Ivo van Doorn
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
2008-03-09 21:37 Ivo van Doorn
2008-02-25 22:20 Ivo van Doorn
2008-02-17 16:30 Ivo van Doorn
2008-02-10 21:46 Ivo van Doorn
2008-02-03 14:41 Ivo van Doorn
2008-01-06 22:37 Ivo van Doorn
2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
2007-10-27 11:34 Ivo van Doorn
2007-10-13 14:27 Ivo van Doorn
2007-10-06 12:19 Ivo van Doorn
2007-09-25 18:52 Ivo van Doorn
2007-09-16 12:17 Ivo van Doorn
2007-08-19 18:18 Ivo van Doorn
2007-08-02 15:45 Ivo van Doorn
2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
2007-06-19 18:18 Ivo van Doorn
2007-06-03 12:25 Ivo van Doorn
2007-05-07 14:44 Ivo van Doorn
2007-04-28 20:45 Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200707252249.47931.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).