From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, rt2400-devel@lists.sourceforge.net
Subject: [PATCH 30/30] rt2x00: rt2x00 2.0.7
Date: Sun, 19 Aug 2007 20:37:04 +0200 [thread overview]
Message-ID: <200708192037.04926.IvDoorn@gmail.com> (raw)
In-Reply-To: <200708192018.30624.IvDoorn@gmail.com>
>From 7b429527e4460c4bc550ca71a47696d677b92e5f Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sun, 19 Aug 2007 20:13:11 +0200
Subject: [PATCH 30/30] rt2x00: rt2x00 2.0.7
Release rt2x00 2.0.7
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 06738e4..2105f44 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -42,7 +42,7 @@
* Module information.
* DRV_NAME should be set within the individual module source files.
*/
-#define DRV_VERSION "2.0.6"
+#define DRV_VERSION "2.0.7"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
--
1.5.3.rc5
next prev parent reply other threads:[~2007-08-19 18:32 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-19 18:18 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-08-19 18:21 ` [PATCH 01/30] rt2x00: Correctly configure packet filter in monitor mode Ivo van Doorn
2007-08-19 18:21 ` [PATCH 02/30] rt2x00: Clear MAC and BSSID when non-monitor interface goes down Ivo van Doorn
2007-08-19 18:21 ` [PATCH 03/30] rt2x00: Check return value of usb_control_msg() Ivo van Doorn
2007-08-19 18:22 ` [PATCH 04/30] rt2x00: Clear all fields on start_link_tune() Ivo van Doorn
2007-08-19 18:22 ` [PATCH 05/30] rt2x00: Don't increase rx_failed for individual frames Ivo van Doorn
2007-08-19 18:23 ` [PATCH 06/30] rt2x00: Set vgc_level during reset_tuner Ivo van Doorn
2007-08-19 18:23 ` [PATCH 07/30] rt2x00: Schedule beacon update Ivo van Doorn
2007-08-19 18:24 ` [PATCH 08/30] rt2x00: Fix width of filter field Ivo van Doorn
2007-08-19 18:24 ` [PATCH 09/30] rt2x00: Be consistent with unsigned Ivo van Doorn
2007-08-19 18:24 ` [PATCH 10/30] rt2x00: Correctly reset TX/RX success/failed counters Ivo van Doorn
2007-08-19 18:25 ` [PATCH 11/30] rt2x00: Rework RF register handling Ivo van Doorn
2007-08-19 18:25 ` [PATCH 12/30] rt2x00: Store firmware in memory Ivo van Doorn
2007-08-19 18:54 ` Michael Buesch
2007-08-19 20:44 ` Ivo van Doorn
2007-08-19 18:26 ` [PATCH 13/30] rt2x00: rt2x00_ring_free returns invalid length Ivo van Doorn
2007-08-19 18:26 ` [PATCH 14/30] Fix off-by-one error in debugfs helpers Ivo van Doorn
2007-08-19 18:26 ` [PATCH 15/30] rt2x00: Use caching for USB transfers Ivo van Doorn
2007-08-19 18:27 ` [PATCH 16/30] rt2x00: Cleanup set_state for rt61 and rt73 Ivo van Doorn
2007-08-19 18:27 ` [PATCH 17/30] rt2x00: Fix register initialization ordering Ivo van Doorn
2007-08-19 18:27 ` [PATCH 18/30] rt2x00: memset descriptor before use Ivo van Doorn
2007-08-19 18:28 ` [PATCH 19/30] rt2x00: Remove IEEE80211_HW_WEP_INCLUDE_IV flag Ivo van Doorn
2007-08-19 18:28 ` [PATCH 20/30] rt2x00: Cleanup TXD flags Ivo van Doorn
2007-08-19 18:28 ` [PATCH 21/30] rt2x00: Add byte-ordering annotation for MAC and BSSID Ivo van Doorn
2007-08-19 18:29 ` [PATCH 22/30] rt2x00: Correctly set TXD retry flag Ivo van Doorn
2007-08-19 18:35 ` [PATCH 23/30] rt2x00: Move rt2x00 files into rt2x00 folder Ivo van Doorn
2007-08-19 18:35 ` [PATCH 24/30] rt2x00: Add file pattern to MAINTAINER entry Ivo van Doorn
2007-08-19 18:35 ` [PATCH 25/30] rt2x00: Fix PLCP setup Ivo van Doorn
2007-08-19 18:36 ` [PATCH 26/30] rt2x00: Clean up RATEMASK handling Ivo van Doorn
2007-08-19 18:36 ` [PATCH 27/30] rt2x00: Add rt2x00lib_reset_link_tuner() Ivo van Doorn
2007-08-19 18:36 ` [PATCH 28/30] rt2x00: Always check if mac80211 requested TX status update Ivo van Doorn
2007-08-20 17:21 ` Johannes Berg
2007-08-21 10:21 ` Ivo van Doorn
2007-08-19 18:36 ` [PATCH 29/30] rt2x00: Lindent Ivo van Doorn
2007-08-19 18:37 ` Ivo van Doorn [this message]
2007-08-23 20:55 ` [Rt2400-devel] Please pull 'upstream' branch of rt2x00 John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200708192037.04926.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).