From: Pavel Roskin <proski@gnu.org>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 21/35] Eliminate vendor IDs
Date: Sat, 01 Sep 2007 00:36:14 -0400 [thread overview]
Message-ID: <20070901043614.2498.37555.stgit@dv.roinet.com> (raw)
In-Reply-To: <20070901043233.2498.95850.stgit@dv.roinet.com>
They are useless next to comments with full device names.
Signed-off-by: Pavel Roskin <proski@gnu.org>
---
drivers/net/wireless/at76_usb.c | 98 ++++++++++++++++++++-------------------
drivers/net/wireless/at76_usb.h | 35 --------------
2 files changed, 49 insertions(+), 84 deletions(-)
diff --git a/drivers/net/wireless/at76_usb.c b/drivers/net/wireless/at76_usb.c
index 8b9f75a..233c4c1 100644
--- a/drivers/net/wireless/at76_usb.c
+++ b/drivers/net/wireless/at76_usb.c
@@ -65,122 +65,122 @@ static struct usb_device_id dev_table[] = {
* at76c503-i3861
*/
/* Generic AT76C503/3861 device */
- {USB_DEVICE(VID_ATMEL, 0x7603), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x03eb, 0x7603), .driver_info = BOARD_503_ISL3861},
/* Linksys WUSB11 v2.1/v2.6 */
- {USB_DEVICE(VID_LINKSYS_OLD, 0x2211), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x066b, 0x2211), .driver_info = BOARD_503_ISL3861},
/* Netgear MA 101 Rev. A */
- {USB_DEVICE(VID_NETGEAR, 0x4100), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0864, 0x4100), .driver_info = BOARD_503_ISL3861},
/* Tekram U-300C / Allnet ALL0193 */
- {USB_DEVICE(VID_TEKRAM, 0x1612), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0b3b, 0x1612), .driver_info = BOARD_503_ISL3861},
/* HP HN210W PKW-J7801A */
- {USB_DEVICE(VID_HP, 0x011c), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x03f0, 0x011c), .driver_info = BOARD_503_ISL3861},
/* Sitecom/Z-Com/Zyxel M4Y-750 */
- {USB_DEVICE(VID_ZCOM, 0x0001), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0cde, 0x0001), .driver_info = BOARD_503_ISL3861},
/* Dynalink/Askey WLL013 (intersil) */
- {USB_DEVICE(VID_ASKEY, 0x0320), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x069a, 0x0320), .driver_info = BOARD_503_ISL3861},
/* EZ connect 11Mpbs Wireless USB Adapter SMC2662W (v1) */
- {USB_DEVICE(VID_SMC_OLD, 0xa001), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0d5c, 0xa001), .driver_info = BOARD_503_ISL3861},
/* AWL-300 */
- {USB_DEVICE(VID_BENQ, 0x9000), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x04a5, 0x9000), .driver_info = BOARD_503_ISL3861},
/* AWU-120, Compex WLU11 */
- {USB_DEVICE(VID_ADDTRON, 0xff31), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x05dd, 0xff31), .driver_info = BOARD_503_ISL3861},
/* AP310 AnyPoint II USB */
- {USB_DEVICE(VID_INTEL, 0x0200), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x8086, 0x0200), .driver_info = BOARD_503_ISL3861},
/* Dynalink L11U */
- {USB_DEVICE(VID_GLOBAL_SUN, 0x7100), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0d8e, 0x7100), .driver_info = BOARD_503_ISL3861},
/* Arescom WL-210, FCC id 07J-GL2411USB */
- {USB_DEVICE(VID_GLOBAL_SUN, 0x7110), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x0d8e, 0x7110), .driver_info = BOARD_503_ISL3861},
/* IO-DATA WN-B11/USB */
- {USB_DEVICE(VID_IO_DATA, 0x0919), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x04bb, 0x0919), .driver_info = BOARD_503_ISL3861},
/* BT Voyager 1010 */
- {USB_DEVICE(VID_ASKEY, 0x0821), .driver_info = BOARD_503_ISL3861},
+ {USB_DEVICE(0x069a, 0x0821), .driver_info = BOARD_503_ISL3861},
/* at76c503-i3863 */
/* Generic AT76C503/3863 device */
- {USB_DEVICE(VID_ATMEL, 0x7604), .driver_info = BOARD_503_ISL3863},
+ {USB_DEVICE(0x03eb, 0x7604), .driver_info = BOARD_503_ISL3863},
/* Samsung SWL-2100U */
- {USB_DEVICE(VID_SAMSUNG, 0xa000), .driver_info = BOARD_503_ISL3863},
+ {USB_DEVICE(0x055d, 0xa000), .driver_info = BOARD_503_ISL3863},
/*
* at76c503-rfmd
*/
/* Generic AT76C503/RFMD device */
- {USB_DEVICE(VID_ATMEL, 0x7605), .driver_info = BOARD_503},
+ {USB_DEVICE(0x03eb, 0x7605), .driver_info = BOARD_503},
/* Dynalink/Askey WLL013 (rfmd) */
- {USB_DEVICE(VID_ASKEY, 0x0321), .driver_info = BOARD_503},
+ {USB_DEVICE(0x069a, 0x0321), .driver_info = BOARD_503},
/* Linksys WUSB11 v2.6 */
- {USB_DEVICE(VID_LINKSYS, 0x2219), .driver_info = BOARD_503},
+ {USB_DEVICE(0x077b, 0x2219), .driver_info = BOARD_503},
/* Network Everywhere NWU11B */
- {USB_DEVICE(VID_LINKSYS, 0x2227), .driver_info = BOARD_503},
+ {USB_DEVICE(0x077b, 0x2227), .driver_info = BOARD_503},
/* Netgear MA 101 Rev. B */
- {USB_DEVICE(VID_NETGEAR, 0x4102), .driver_info = BOARD_503},
+ {USB_DEVICE(0x0864, 0x4102), .driver_info = BOARD_503},
/* DWL-120 rev. E */
- {USB_DEVICE(VID_DLINK, 0x3200), .driver_info = BOARD_503},
+ {USB_DEVICE(0x2001, 0x3200), .driver_info = BOARD_503},
/* Actiontec 802UAT1, HWU01150-01UK */
- {USB_DEVICE(VID_ACTIONTEC, 0x7605), .driver_info = BOARD_503},
+ {USB_DEVICE(0x1668, 0x7605), .driver_info = BOARD_503},
/* AirVast W-Buddie WN210 */
- {USB_DEVICE(VID_ATMEL, 0x4102), .driver_info = BOARD_503},
+ {USB_DEVICE(0x03eb, 0x4102), .driver_info = BOARD_503},
/* XH1153 802.11b USB adapter */
- {USB_DEVICE(VID_DICK_SMITH, 0x5743), .driver_info = BOARD_503},
+ {USB_DEVICE(0x1371, 0x5743), .driver_info = BOARD_503},
/* WL-200U */
- {USB_DEVICE(VID_DICK_SMITH, 0x0002), .driver_info = BOARD_503},
+ {USB_DEVICE(0x1371, 0x0002), .driver_info = BOARD_503},
/* BenQ AWL-400 USB stick */
- {USB_DEVICE(VID_BENQ, 0x9001), .driver_info = BOARD_503},
+ {USB_DEVICE(0x04a5, 0x9001), .driver_info = BOARD_503},
/* 3COM 3CRSHEW696 */
- {USB_DEVICE(VID_3COM, 0x0a01), .driver_info = BOARD_503},
+ {USB_DEVICE(0x0506, 0x0a01), .driver_info = BOARD_503},
/* Siemens Santis ADSL WLAN USB adapter WLL 013 */
- {USB_DEVICE(VID_SIEMENS, 0x001b), .driver_info = BOARD_503},
+ {USB_DEVICE(0x0681, 0x001b), .driver_info = BOARD_503},
/* Belkin F5D6050, version 2 */
- {USB_DEVICE(VID_BELKIN_2, 0x0050), .driver_info = BOARD_503},
+ {USB_DEVICE(0x050d, 0x0050), .driver_info = BOARD_503},
/* iBlitzz, BWU613 (not *B or *SB) */
- {USB_DEVICE(VID_BLITZ, 0xb000), .driver_info = BOARD_503},
+ {USB_DEVICE(0x07b8, 0xb000), .driver_info = BOARD_503},
/* Gigabyte GN-WLBM101 */
- {USB_DEVICE(VID_GIGABYTE, 0x8003), .driver_info = BOARD_503},
+ {USB_DEVICE(0x1044, 0x8003), .driver_info = BOARD_503},
/* Planex GW-US11S */
- {USB_DEVICE(VID_PLANEX, 0x3220), .driver_info = BOARD_503},
+ {USB_DEVICE(0x2019, 0x3220), .driver_info = BOARD_503},
/* Internal WLAN adapter in h5[4,5]xx series iPAQs */
- {USB_DEVICE(VID_COMPAQ, 0x0032), .driver_info = BOARD_503},
+ {USB_DEVICE(0x049f, 0x0032), .driver_info = BOARD_503},
/*
* at76c503-rfmd-acc
*/
/* SMC 2664W */
- {USB_DEVICE(VID_SMC, 0x3501), .driver_info = BOARD_503_ACC},
+ {USB_DEVICE(0x083a, 0x3501), .driver_info = BOARD_503_ACC},
/* Belkin F5D6050, SMC 2662W v2, SMC 2662W-AR */
- {USB_DEVICE(VID_BELKIN, 0xa002), .driver_info = BOARD_503_ACC},
+ {USB_DEVICE(0x0d5c, 0xa002), .driver_info = BOARD_503_ACC},
/*
* at76c505-rfmd
*/
/* Generic AT76C505/RFMD */
- {USB_DEVICE(VID_ATMEL, 0x7606), .driver_info = BOARD_505},
+ {USB_DEVICE(0x03eb, 0x7606), .driver_info = BOARD_505},
/*
* at76c505-rfmd2958
*/
/* Generic AT76C505/RFMD, OvisLink WL-1130USB */
- {USB_DEVICE(VID_ATMEL, 0x7613), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x03eb, 0x7613), .driver_info = BOARD_505_2958},
/* Fiberline WL-240U */
- {USB_DEVICE(VID_CNET, 0x0014), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x1371, 0x0014), .driver_info = BOARD_505_2958},
/* CNet CNUSB 611G */
- {USB_DEVICE(VID_CNET, 0x0013), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x1371, 0x0013), .driver_info = BOARD_505_2958},
/* Linksys WUSB11 v2.8 */
- {USB_DEVICE(VID_LINKSYS_1915, 0x2233), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x1915, 0x2233), .driver_info = BOARD_505_2958},
/* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
- {USB_DEVICE(VID_XTERASYS, 0x1001), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x12fd, 0x1001), .driver_info = BOARD_505_2958},
/* Corega WLAN USB Stick 11 */
- {USB_DEVICE(VID_COREGA, 0x7613), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x07aa, 0x7613), .driver_info = BOARD_505_2958},
/* Microstar MSI Box MS6978 */
- {USB_DEVICE(VID_MSI, 0x1020), .driver_info = BOARD_505_2958},
+ {USB_DEVICE(0x0db0, 0x1020), .driver_info = BOARD_505_2958},
/*
* at76c505a-rfmd2958
*/
/* Generic AT76C505A device */
- {USB_DEVICE(VID_ATMEL, 0x7614), .driver_info = BOARD_505A},
+ {USB_DEVICE(0x03eb, 0x7614), .driver_info = BOARD_505A},
/* Generic AT76C505AS device */
- {USB_DEVICE(VID_ATMEL, 0x7617), .driver_info = BOARD_505A},
+ {USB_DEVICE(0x03eb, 0x7617), .driver_info = BOARD_505A},
/* Siemens Gigaset USB WLAN Adapter 11 */
- {USB_DEVICE(VID_GIGASET, 0x0701), .driver_info = BOARD_505A},
+ {USB_DEVICE(0x1690, 0x0701), .driver_info = BOARD_505A},
/*
* at76c505amx-rfmd
*/
/* Generic AT76C505AMX device */
- {USB_DEVICE(VID_ATMEL, 0x7615), .driver_info = BOARD_505AMX},
+ {USB_DEVICE(0x03eb, 0x7615), .driver_info = BOARD_505AMX},
{}
};
diff --git a/drivers/net/wireless/at76_usb.h b/drivers/net/wireless/at76_usb.h
index 07bbf14..33ba517 100644
--- a/drivers/net/wireless/at76_usb.h
+++ b/drivers/net/wireless/at76_usb.h
@@ -27,41 +27,6 @@
/* current driver version */
#define DRIVER_VERSION "0.16"
-/* USB vendor IDs */
-#define VID_3COM 0x0506
-#define VID_ACTIONTEC 0x1668
-#define VID_ADDTRON 0x05dd
-#define VID_ASKEY 0x069a
-#define VID_ATMEL 0x03eb
-#define VID_BELKIN 0x0d5c
-#define VID_BELKIN_2 0x050d
-#define VID_BENQ 0x04a5
-#define VID_BLITZ 0x07b8
-#define VID_CNET 0x1371
-#define VID_COMPAQ 0x049f
-#define VID_GLOBAL_SUN 0x0d8e
-#define VID_COREGA 0x07aa
-#define VID_DICK_SMITH 0x1371
-#define VID_DLINK 0x2001
-#define VID_GIGABYTE 0x1044
-#define VID_GIGASET 0x1690
-#define VID_HP 0x03f0
-#define VID_INTEL 0x8086
-#define VID_IO_DATA 0x04bb
-#define VID_LINKSYS 0x077b
-#define VID_LINKSYS_1915 0x1915
-#define VID_LINKSYS_OLD 0x066b
-#define VID_MSI 0x0db0
-#define VID_ZCOM 0x0cde
-#define VID_NETGEAR 0x0864
-#define VID_SAMSUNG 0x055d
-#define VID_SIEMENS 0x0681
-#define VID_SMC 0x083a
-#define VID_SMC_OLD 0x0d5c
-#define VID_PLANEX 0x2019
-#define VID_TEKRAM 0x0b3b
-#define VID_XTERASYS 0x12fd
-
/* Board types */
enum board_type {
BOARD_503_ISL3861 = 1,
next prev parent reply other threads:[~2007-09-01 4:36 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-01 4:34 [PATCH 00/35] Update at76_usb to the start of mac80211 port Pavel Roskin
2007-09-01 4:34 ` [PATCH 01/35] Protect at76_get_op_mode() and at76_get_mib() against short reads Pavel Roskin
2007-09-01 4:34 ` [PATCH 02/35] Use existing macros to find bulk in and bulk out endpoints Pavel Roskin
2007-09-01 4:34 ` [PATCH 03/35] Rewrite at76_alloc_urbs() in a more linear fashion Pavel Roskin
2007-09-01 4:34 ` [PATCH 04/35] Avoid overuse of NULL Pavel Roskin
2007-09-01 4:34 ` [PATCH 05/35] Add myself to the author list Pavel Roskin
2007-09-01 4:34 ` [PATCH 06/35] Move (de)initialization functions closer to the end of file Pavel Roskin
2007-09-01 4:34 ` [PATCH 07/35] Don't use shift on numeric constants in usb_control_msg() arguments Pavel Roskin
2007-09-01 4:35 ` [PATCH 08/35] Merge at76_download_external_fw() into at76_load_external_fw() Pavel Roskin
2007-09-01 4:35 ` [PATCH 09/35] Simplify at76_usbdfu_download() Pavel Roskin
2007-09-01 4:35 ` [PATCH 10/35] Add minimal support to 505AMX Pavel Roskin
2007-09-01 4:35 ` [PATCH 11/35] Simplify logic in at76_get_reg_domain() Pavel Roskin
2007-09-01 4:35 ` [PATCH 12/35] Fix hex2str() and mac2str() to avoid buffer overlap Pavel Roskin
2007-09-01 4:35 ` [PATCH 13/35] Rename some long functions and fields Pavel Roskin
2007-09-01 4:35 ` [PATCH 14/35] Fix incorrect queue management in at76_tx_mgmt() Pavel Roskin
2007-09-01 4:35 ` [PATCH 15/35] Introduce at76_quiesce(), use it to stop network activity Pavel Roskin
2007-09-01 4:35 ` [PATCH 16/35] Don't disable and enable tasklets, it doesn't work as expected Pavel Roskin
2007-09-01 4:35 ` [PATCH 17/35] Start beacon timeout task when connected Pavel Roskin
2007-09-01 4:35 ` [PATCH 18/35] Only cancel correct timeouts for Auth and Assoc replies Pavel Roskin
2007-09-01 9:17 ` Johannes Berg
2007-09-01 10:54 ` Pavel Roskin
2007-09-01 11:04 ` Johannes Berg
2007-09-01 13:16 ` John W. Linville
2007-09-01 20:09 ` Pavel Roskin
2007-09-01 4:36 ` [PATCH 19/35] Improve output of the regdomain id Pavel Roskin
2007-09-01 4:36 ` [PATCH 20/35] Protect at76_iw_handler_set_scan() with mutex Pavel Roskin
2007-09-01 4:36 ` Pavel Roskin [this message]
2007-09-01 4:36 ` [PATCH 22/35] Only retry resubmitting rx_urb once Pavel Roskin
2007-09-01 4:36 ` [PATCH 23/35] Simplify at76_get_mib_mdomain() Pavel Roskin
2007-09-01 4:36 ` [PATCH 24/35] Do implicit scanning only with current ESSID Pavel Roskin
2007-09-01 4:36 ` [PATCH 25/35] Don't dump mib_mdomain while scanning, it's done on device startup Pavel Roskin
2007-09-01 4:36 ` [PATCH 26/35] Improve dump of MAC_ADDR Pavel Roskin
2007-09-01 4:36 ` [PATCH 27/35] Remove unneeded braces, found by checkpatch.pl Pavel Roskin
2007-09-01 4:36 ` [PATCH 28/35] Convert dbg() to at76_dbg() or remove it Pavel Roskin
2007-09-01 4:37 ` [PATCH 29/35] Eliminate at76_dbg_dumpbuf() in favor of hex2str() Pavel Roskin
2007-09-01 4:37 ` [PATCH 30/35] Eliminate pr_debug() in favor of at76_dbg() Pavel Roskin
2007-09-01 4:37 ` [PATCH 31/35] Simplify logic in at76_is_hidden_ssid() Pavel Roskin
2007-09-01 4:37 ` [PATCH 32/35] Massive cleanup of dump functions Pavel Roskin
2007-09-01 4:37 ` [PATCH 33/35] Remove international roaming support Pavel Roskin
2007-09-01 4:37 ` [PATCH 34/35] Don't do additional MIB dumps if DEBUG is defined Pavel Roskin
2007-09-01 4:37 ` [PATCH 35/35] Replace scan_runs with scan_need_any Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070901043614.2498.37555.stgit@dv.roinet.com \
--to=proski@gnu.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).