From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: Michael Wu <flamingice@sourmilk.net>, linux-wireless@vger.kernel.org
Subject: [PATCH 09/21] wireless networking: move frame inline functions to generic header
Date: Thu, 06 Sep 2007 01:42:18 +0200 [thread overview]
Message-ID: <20070905234625.710099000@sipsolutions.net> (raw)
In-Reply-To: 20070905234209.108005000@sipsolutions.net
These inlines are generally useful, not just with mac80211.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
include/linux/ieee80211.h | 61 ++++++++++++++++++++++++++++++++++++++++++++++
include/net/mac80211.h | 60 ---------------------------------------------
2 files changed, 61 insertions(+), 60 deletions(-)
--- wireless-dev.orig/include/linux/ieee80211.h 2007-09-06 01:34:56.734453431 +0200
+++ wireless-dev/include/linux/ieee80211.h 2007-09-06 01:35:18.784453431 +0200
@@ -16,6 +16,7 @@
#define IEEE80211_H
#include <linux/types.h>
+#include <asm/byteorder.h>
#define FCS_LEN 4
@@ -581,4 +582,64 @@ enum wifi_oui_stype_wmm {
WIFI_OUI_STYPE_WMM_TSPEC = 2,
};
+/**
+ * ieee80211_get_SA - get pointer to SA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the source address (SA). It does not verify that the
+ * header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
+{
+ u8 *raw = (u8 *) hdr;
+ u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */
+
+ switch (tofrom) {
+ case 2:
+ return hdr->addr3;
+ case 3:
+ return hdr->addr4;
+ }
+ return hdr->addr2;
+}
+
+/**
+ * ieee80211_get_DA - get pointer to DA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the destination address (DA). It does not verify that
+ * the header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
+{
+ u8 *raw = (u8 *) hdr;
+ u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */
+
+ if (to_ds)
+ return hdr->addr3;
+ return hdr->addr1;
+}
+
+/**
+ * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set
+ *
+ * This function determines whether the "more fragments" bit is set
+ * in the frame.
+ *
+ * @hdr: the frame
+ */
+static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr)
+{
+ return (le16_to_cpu(hdr->frame_control) &
+ IEEE80211_FCTL_MOREFRAGS) != 0;
+}
+
#endif /* IEEE80211_H */
--- wireless-dev.orig/include/net/mac80211.h 2007-09-06 01:35:18.104453431 +0200
+++ wireless-dev/include/net/mac80211.h 2007-09-06 01:35:18.784453431 +0200
@@ -1334,66 +1334,6 @@ void ieee80211_wake_queues(struct ieee80
*/
void ieee80211_scan_completed(struct ieee80211_hw *hw);
-/**
- * ieee80211_get_SA - get pointer to SA
- *
- * Given an 802.11 frame, this function returns the offset
- * to the source address (SA). It does not verify that the
- * header is long enough to contain the address, and the
- * header must be long enough to contain the frame control
- * field.
- *
- * @hdr: the frame
- */
-static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
-{
- u8 *raw = (u8 *) hdr;
- u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */
-
- switch (tofrom) {
- case 2:
- return hdr->addr3;
- case 3:
- return hdr->addr4;
- }
- return hdr->addr2;
-}
-
-/**
- * ieee80211_get_DA - get pointer to DA
- *
- * Given an 802.11 frame, this function returns the offset
- * to the destination address (DA). It does not verify that
- * the header is long enough to contain the address, and the
- * header must be long enough to contain the frame control
- * field.
- *
- * @hdr: the frame
- */
-static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
-{
- u8 *raw = (u8 *) hdr;
- u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */
-
- if (to_ds)
- return hdr->addr3;
- return hdr->addr1;
-}
-
-/**
- * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set
- *
- * This function determines whether the "more fragments" bit is set
- * in the frame.
- *
- * @hdr: the frame
- */
-static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr)
-{
- return (le16_to_cpu(hdr->frame_control) &
- IEEE80211_FCTL_MOREFRAGS) != 0;
-}
-
#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
#define MAC_ARG(x) ((u8*)(x))[0], ((u8*)(x))[1], ((u8*)(x))[2], \
((u8*)(x))[3], ((u8*)(x))[4], ((u8*)(x))[5]
--
next prev parent reply other threads:[~2007-09-06 13:46 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-05 23:42 [PATCH 00/21] more mac80211 updates Johannes Berg
2007-09-05 23:42 ` [PATCH 01/21] mac80211: get STA after tx radiotap snipped Johannes Berg
2007-09-05 23:42 ` [PATCH 02/21] mac80211: allow drivers to indicate failed FCS/PLCP checksum Johannes Berg
2007-09-05 23:42 ` [PATCH 03/21] mac80211: revamp interface and filter configuration Johannes Berg
2007-09-06 14:28 ` Michael Buesch
2007-09-06 14:46 ` Johannes Berg
2007-09-06 17:05 ` Ivo van Doorn
2007-09-07 13:23 ` Johannes Berg
2007-09-07 17:56 ` Ivo van Doorn
2007-09-14 3:50 ` Michael Wu
2007-09-14 12:06 ` Johannes Berg
2007-09-05 23:42 ` [PATCH 04/21] mac80211: validate VLAN interfaces better Johannes Berg
2007-09-05 23:42 ` [PATCH 05/21] mac80211: remove key threshold stuff Johannes Berg
2007-09-05 23:42 ` [PATCH 06/21] mac80211: remove IEEE80211_CONF_SSID_HIDDEN and PRISM2_PARAM_BROADCAST_SSID Johannes Berg
2007-09-05 23:42 ` [PATCH 07/21] mac80211: renumber and document the hardware flags Johannes Berg
2007-09-05 23:42 ` [PATCH 08/21] mac80211: document a lot more Johannes Berg
2007-09-05 23:42 ` Johannes Berg [this message]
2007-09-05 23:42 ` [PATCH 10/21] mac80211: yet more documentation Johannes Berg
2007-09-05 23:42 ` [PATCH 11/21] mac80211: fix warnings introduced by the doc patches Johannes Berg
2007-09-05 23:42 ` [PATCH 12/21] mac80211: remove tx info sw_retry_attempt member Johannes Berg
2007-09-05 23:42 ` [PATCH 13/21] mac80211: print out wiphy name instead of master device Johannes Berg
2007-09-05 23:42 ` [PATCH 14/21] mac80211 maintainership Johannes Berg
2007-09-05 23:42 ` [PATCH 15/21] mac80211: rename ieee80211_cfg.c to cfg.c Johannes Berg
2007-09-05 23:42 ` [PATCH 16/21] mac80211: consolidate decryption Johannes Berg
2007-09-05 23:42 ` [PATCH 17/21] mac80211: consolidate encryption Johannes Berg
2007-09-05 23:42 ` [PATCH 18/21] mac80211: remove ieee80211_wep_get_keyidx Johannes Berg
2007-09-05 23:42 ` [PATCH 19/21] mac80211: remove crypto algorithm typedef Johannes Berg
2007-09-05 23:42 ` [PATCH 20/21] mac80211: kill IE parse typedef Johannes Berg
2007-09-05 23:42 ` [PATCH 21/21] mac80211: kill vlan_id Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070905234625.710099000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=flamingice@sourmilk.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).