From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, rt2400-devel@lists.sourceforge.net
Subject: [PATCH 23/24] rt2x00: Add additional bit to MAX_FRAME_UNIT
Date: Sun, 16 Sep 2007 14:19:43 +0200 [thread overview]
Message-ID: <200709161419.44941.IvDoorn@gmail.com> (raw)
In-Reply-To: <200709161403.11332.IvDoorn@gmail.com>
Legacy driver indicated that the MAX_FRAME_UNIT register
was 11 bits long. _but_ they do write 12 bits to the register.
Increase the register definition to accept the 12th bit.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/rt2x00/rt73usb.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index f24bff3..6721d7d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -262,7 +262,7 @@ struct hw_pairwise_ta_entry {
* MAC_CSR6: Maximum frame length register.
*/
#define MAC_CSR6 0x3018
-#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x000007ff)
+#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
/*
* MAC_CSR7: Reserved
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 82f4e76..5d63a1a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -174,7 +174,7 @@ struct hw_pairwise_ta_entry {
* MAC_CSR6: Maximum frame length register.
*/
#define MAC_CSR6 0x3018
-#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x000007ff)
+#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
/*
* MAC_CSR7: Reserved
--
1.5.3
next prev parent reply other threads:[~2007-09-16 12:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200709161403.11332.IvDoorn@gmail.com>
2007-09-16 12:17 ` [PATCH 1/24] rt2x00: Remove firmware not-NULL check Ivo van Doorn
2007-09-16 12:17 ` [PATCH 2/24] rt2x00: Don't check for IEEE80211_TXCTL_REQ_TX_STATUS Ivo van Doorn
2007-09-16 12:18 ` [PATCH 3/24] rt2x00: Cleanup rxdone Ivo van Doorn
2007-09-16 12:18 ` [PATCH 4/24] rt2x00: Don't allow configuration calls when uninitialized Ivo van Doorn
2007-09-16 12:18 ` [PATCH 5/24] rt2x00: Fix rt61pci and rt73usb beacon handling Ivo van Doorn
2007-09-16 12:18 ` [PATCH 6/24] rt2x00: Recalculate link quality Ivo van Doorn
2007-09-16 12:18 ` [PATCH 7/24] rt2x00: Cleanup entry->flags Ivo van Doorn
2007-09-16 12:18 ` [PATCH 8/24] rt2x00: Reduce LNA flags Ivo van Doorn
2007-09-16 12:18 ` [PATCH 9/24] rt2x00: Rework RT61 and RT73 Antenna handling Ivo van Doorn
2007-09-16 12:18 ` [PATCH 10/24] rt2x00: Rename DEVICE_SUPPORT_ATIM to REQUIRE_BEACON_RING Ivo van Doorn
2007-09-16 12:18 ` [PATCH 11/24] rt2x00: Remove rt2x00mac_reset() Ivo van Doorn
2007-09-16 12:18 ` [PATCH 12/24] rt2x00: Fix system freeze on device removal Ivo van Doorn
2007-09-16 12:18 ` [PATCH 13/24] rt2x00: Reduce magic value writing to device Ivo van Doorn
2007-09-16 12:19 ` [PATCH 14/24] rt2x00: New USB ID's for rt73usb and rt2500usb Ivo van Doorn
2007-09-16 12:19 ` [PATCH 15/24] rt2x00: Beacon ring entries should have QID_MGMT Ivo van Doorn
2007-09-16 12:19 ` [PATCH 16/24] rt2x00: Fix DEV_RATEBIT_ definitions Ivo van Doorn
2007-09-16 12:19 ` [PATCH 17/24] rt2x00: Fix rfkill handling Ivo van Doorn
2007-09-16 12:19 ` [PATCH 18/24] rt2x00: Merge allocation/free register components Ivo van Doorn
2007-09-16 12:19 ` [PATCH 19/24] rt2x00: macro's shouldn't use hidden arguments Ivo van Doorn
2007-09-16 12:19 ` [PATCH 20/24] rt2x00: Fix channel initialization Ivo van Doorn
2007-09-16 12:19 ` [PATCH 21/24] rt2x00: Add better CONFIG_PM checks Ivo van Doorn
2007-09-16 12:19 ` [PATCH 22/24] rt2x00: Add start/stop handlers Ivo van Doorn
2007-09-16 12:19 ` Ivo van Doorn [this message]
2007-09-16 12:19 ` [PATCH 24/24] rt2x00: Release rt2x00 2.0.8 Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709161419.44941.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).