* Please pull 'upstream' branch of rt2x00
@ 2007-04-28 20:45 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-04-28 20:45 UTC (permalink / raw)
To: John Linville, linux-wireless
Hi John,
A new update of rt2x00 is ready. :)
Perhaps the most interesting thing would be the removal
of passive scan support, because it was a purely software based
solution that (if really required) could best be resolved in mac80211
rather then the driver for devices that don't support such a thing in the
hardware.
The rest is just code being moved around, (more specifically code being moved
from the drivers toward rt2x00lib/pci/usb. There aren't any specific bugfixes made.
Ivo
---
The following changes since commit 9e4fd17309d0acddd1748c76f6bd35a0c85446b6:
Johannes Berg (1):
clarify locking comment in cfg80211
are found in the git repository at:
http://git.serialmonkey.com/rt2x00.git/ upstream
Ivo van Doorn (38):
rt2x00: Move beaconhandling into rt2x00{usb,pci} modules
rt2x00: Fix rt2x00pci, rt2x00usb, rt2x00mac module/debug enviroment
rt2x00: Move common rxdone and txdone code into rt2x00lib
rt2x00: Set rf_base during channel configuration
rt2x00: Move initialize() and uninitialize() into rt2x00pci/rt2x00usb
rt2x00: Fix spellin error
rt2x00: Move ieee80211_hw init & registration into rt2x00lib
rt2x00: Fix hardware mode registration order
rt2x00: Add struct debugsfs pointer to rt2x00dev
rt2x00: Fix debugfs related compile problem
rt2x00: Explicit return type for rt2x00debug_register
rt2x00: Fix sparse errors
rt2x00: Move alloc_rings into rt2x00lib
rt2x00: Move device allocation into rt2x00lib
rt2x00: Make rt2x00debug const
rt2x00: Minor fixes (comment & headers)
rt2x00: Create rt2x00_ops structure
rt2x00: rt2x00pci shouldn't use DRV_NAME for irq registration
rt2x00: Rename rt(25)73 identifications
rt2x00: Move PCI/USB handlers into rt2x00pci/usb modules
rt2x00: Fix hw mode registration
rt2x00: Fix NULL pointer exeption during init_hw
rt2x00: Fix sparse warnings
rt2x00: Fix ERROR strings
rt2x00: Move rf values outside functions
rt2x00: Allocate enough rings
rt2x00: Move write_tx_data functions into rt2x00pci/usb
rt2x00: Fix compilation error when not selecting rt61pci and rt73usb
rt2x00: Add return statement to rt2x00lib_alloc_dev
rt2x00: Create dummy rt2x00lib_firmware_load_wait()
rt2x00: Move write_tx_desc initialization into rt2x00lib
rt2x00: Remove ENTRY_RTS_CTS_FRAME flag
rt2x00: Fix check for Acked frames
Merge branch 'wireless-dev'
rt2x00: Remove passive scanning support
rt2x00: Set channel_change_time to 0
rt2x00: Move USB txdone handler into rt2x00usb
rt2x00: rt61 should call ieee80211_wake_queue only for correct queues
drivers/net/wireless/mac80211/rt2x00/Makefile | 2 +
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 1303 +++------------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 9 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 1496 ++++--------------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 1448 +++--------------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 2 -
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 165 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 27 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 7 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 689 +++++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 70 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 166 +--
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 587 +++++++
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 50 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 637 +++++++
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 44 +-
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 1731 ++++---------------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 1597 ++++---------------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 4 +-
21 files changed, 3553 insertions(+), 6495 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-05-07 14:44 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-05-07 14:44 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest rt2x00 update. It is a rather small one.
Only 1 real fix, and the second path is cosmetic since it
will start a proper versioning of rt2x00.
This will most likely be the last pull request for the next 1 or 2 months
due to developer/time/health shortage.
The TODO list for rt2x00 has been expanding over the last few days,
so as soon as I am fully back there will be quite a lot to do. ;)
(http://rt2x00.serialmonkey.com/wiki/index.php?title=Rt2x00_beta#rt2x00_beta_status_page)
Ivo
---
The following changes since commit 5209b1eff0b1891d8bb002eb067a11b4caa5f5bc:
John W. Linville (1):
Merge branch 'from-linus'
are found in the git repository at:
http://git.serialmonkey.com/rt2x00.git/ upstream
Ivo van Doorn (2):
rt2x00: release 2.0.0
Merge branch 'wireless-dev'
Jan Kiszka (1):
rt2x00: Fix master beacon setup
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 3 +--
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 17 -----------------
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 14 +++++++++++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 17 -----------------
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 19 +------------------
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 8 +++-----
10 files changed, 30 insertions(+), 80 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-06-03 12:25 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-06-03 12:25 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the new rt2x00 release: 2.0.1
It contains many patches since the previous release.
It doesn't address any major bugs that have been
reported, but the code has been cleaned up.
The most notable change is the addition of rfkill support. :)
Ivo
---
The following changes since commit 2e6c9eed7541f3e2a23a469f08e5be3ec28a129f:
James Ketrenos (1):
Add iwlwifi wireless drivers
are available in the git repository at:
git://git.serialmonkey.com/rt2x00.git/ upstream
Gertjan van Wingerde (8):
rt2x00: Move rxd_size and txd_size fields.
rt2x00: Update firmware loading interface.
rt2x00: Initialisation cleanup.
Move firmware loading code out of main rt2x00lib source file.
Fix debug support.
Let lowlevel driver decide on firmware names.
rt2x00: Provide cleaner firmware loading interface to lowlevel driver.
rt2x00: Deregister debugs at firmware loading failure.
Ivo van Doorn (34):
rt2x00: Add rfkill support
rt2x00: Use MODULE_FIRMWARE
rt2x00: cosmetic - rename CONFIG_RT2X00_DEBUGFS
rt2x00: Move crc-itu-t usage into rt2x00lib
rt2x00: Remove channel_change_time usage
rt2x00: Apply the 80 character line rule
rt2x00: Prevent forward declaration of functions
rt2x00: When toggling RX the link tuner should also be toggled
rt2x00: Move generic link_tuner code into rt2x00lib
rt2x00: Make rt2400 link tuner work like legacy driver
rt2x00: Remove activity_led
rt2x00: Make sure link tuning follows Legacy guidelines
rt2x00: Use correct values for r24, r25 and r26
rt2x00: Add EEPROM recovery data
rt2x00: Correctly initialize rt73usb PHY_CSR1
rt2x00: Use defines for chipset assignments
rt2x00: Merge kick_beacon_gen and kick_tx_queue
rt2x00: Merge radio control functions into 1 callback function
rt2x00: Make promisc mode available to USB devices
rt2x00: Make use of open / stop handlers
rt2x00: Cleanup flag handling
rt2x00: Use linux/bitops.h
rt2x00: Add FIELD8 and matching handlers
rt2x00: Move drv_name field into rt2x00_ops
rt2x00: rt2x00lib is in charge of forcing promisc mode
rt2x00: Make debug messages more informative
rt2x00: Fix rt61 typo
rt2x00: Move CONFIG_RT2X00_LIB_DEBUGFS ifdef out of rt2x00dev.c
rt2x00: Reduce indentation for txpower handlers
rt2x00: Define ARCSR2, ARCSR3, ARCSR4 and ARCSR5 registers
rt2x00: Fix compilation errors for rt2x00-rfkill
Merge branch 'wireless-dev'
rt2x00: Merge LENGTH_LOW and LENGTH_HIGH
rt2x00: Release rt2x00 2.0.1
drivers/net/wireless/mac80211/rt2x00/Kconfig | 33 +-
drivers/net/wireless/mac80211/rt2x00/Makefile | 10 +-
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 401 +++++++------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 65 ++-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 486 +++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 61 ++-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 542 +++++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 29 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 407 +++++++------
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 39 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 22 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 264 ++++-----
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 129 +++++
.../net/wireless/mac80211/rt2x00/rt2x00firmware.h | 49 ++
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 15 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 179 +++---
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 98 ++--
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 133 +++++
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.h | 51 ++
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 76 ++--
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 601 ++++++++++++--------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 33 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 589 +++++++++++--------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 33 +-
24 files changed, 2589 insertions(+), 1756 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00firmware.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00firmware.h
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00rfkill.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00rfkill.h
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-06-19 18:18 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-06-19 18:18 UTC (permalink / raw)
To: John Linville, linux-wireless, rt2400-devel
Hi John,
Here is the 2.0.2 release of rt2x00.
As usual most changes are code cleaning,
followed by code moving into the library modules.
Unfortunately, this round still does not contain real bugfixes.
Hopefully the next release will really bugfixes. ;)
The actuall diff is quite big, but that is mainly because
of the cleanup in the register access functions which caused
all register functions to be renamed (which prevents namespace
pollution).
Ivo
---
The following changes since commit 9181e959da76d85d688d8ec763702ed2f3b4edf9:
John W. Linville (1):
rt2x00firmware.c: include delay.h to avoid build error on ppc64
are available in the git repository at:
git://git.serialmonkey.com/rt2x00.git/ upstream
Gertjan van Wingerde (1):
rt2x00: Clean up register access functions.
Ivo van Doorn (32):
rt2x00: Remove debug module parameter
rt2x00: Cleanup header
rt2x00: *_bbp_check should not return magic value
rt2x00: rt2400pci - Use BBPCSR for txdesc
rt2x00: Make antenna selection more transparent
rt2x00: Don't hardcode beacon interval
rt2x00: Move config requirement into rt2x00lib
rt2x00: Remove pointless 0xff checks
rt2x00: Correct *_bbp_check
rt2x00: Correctly set the flags for the correct flags field
rt2x00: Remove unsused structure
rt2x00: Don't export config functions to outside rt2x00lib
Merge branch 'wireless-dev'
rt2x00: Constify txd_size and rxd_size
rt2x00: rt2x00lib_disable_radio should call toggle_rx
rt2x00: Move USB radio enabling/disabling into rt2x00usb
rt2x00: Remove ring->type
rt2x00: Split rings into tx and rx arrays
rt2x00: Split tx ring array into tx and bcn
rt2x00: Move rt2x00{pci,usb} shared code into rt2x00lib
rt2x00: Move ring allocation into rt2x00lib
Merge branch 'wireless-dev'
rt2x00: Fix ring array iteration
rt2x00: Remove huge macro functions
rt2x00: Include rt2x00firmware.h
rt2x00: Move ring allocation partially into rt2x00lib
rt2x00: Remove unused library call fields
rt2x00: rt61 and rt73 do not support Atim
rt2x00: link_tuner should be toggled when the radio is toggled
rt2x00: Add EEPROM recovery code for mac address
Merge branch 'wireless-dev'
rt2x00: Release rt2x00 2.0.2
Mattias Nissler (1):
rt73: Prevent oops when usb device is disconnected.
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 627 ++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 28 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 673 +++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 34 +-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 660 ++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 38 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 120 ++--
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 540 ++++++++++---
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 60 ++
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 7 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 13 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 52 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 283 +------
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 29 +
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 4 -
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 323 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 14 +-
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 858 +++++++++-----------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 43 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 758 +++++++----------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 43 +-
21 files changed, 2363 insertions(+), 2844 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2007-07-20 8:11 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Finally the 2.0.3 release of rt2x00 is here :)
And as promised since actually contains bugfixes
The hightlights are a working link tuner which finally
makes sure all drivers come close to being actually
useable.
Also a small change in statistics, rt2x00 will now only report the RSSI to mac80211.
The reporting of Noise values have been removed,
since rt2x00 cannot measure the noise and previously
reported the sensitivity value determined by the link_tuner.
And I am not completely sure if that is a desired behavior, since the preference
would be a measured value I guess.
Also I still have to determine what a good value for the Signal reporting
should be. With only a RSSI reporting I feel rt2x00 isn't reporting all that it can...
Ivo
---
The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
Johannes Berg (1):
mac80211: regdomain.c needs to include ieee80211_i.h
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master
Adam Baker (1):
rt2x00: Set Maximum sensitivity when not receiving
Ivo van Doorn (42):
rt2x00: Remove usage of open and stop callbacks
rt2x00: Fix rfkill compilation
rt2x00: rfkill should use input_poll device
rt2x00: Fix promisc mode check
rt2x00: Put debugfs_intf inbetween DEBUGFS defines
rt2x00: Cleanup debug messages
rt2x00: Remove ENTRY_TXD_NEW_SEQ flag
rt2x00: Remove DRV_NAME define from rt2x00.h
rt2x00: Remove device & mac_addr fields
rt2x00: Use the mac80211 provided workqueue
rt2x00: Don't wake device on resume
rt2x00: Move interrupt toggling into seperate function
rt2x00: Round LINK_TUNER_INTERVAL up
rt2x00: Set the IEEE80211_HW_NO_PROBE_FILTERING flag
rt2x00: Add rt2570 chipset revisions
rt2x00: Split TXD_ENTRY_AVAILABLE
rt2x00: rt61 should check the CIPHER_ERROR bit
rt2x00: Fix reporting false rate during rx
rt2x00: Correctly exit the firmware load function
rt2x00: Fix link tuner limitation for rt2400pci
rt2x00: Cleanup Kconfig dependencies and selects
rt2x00: Defer firmware loading untill ifup
rt2x00: Change register definition ordering
rt2x00: Correctly initialize PSCSR2 in rt2400.
rt2x00: Introduce the walking average
rt2x00: Remove noise reporting
rt2x00: Fix RSSI value reading / reporting / link tuning
rt2x00: Use prefetch for ring loop
rt2x00: Use the register field defines
rt2x00: Move initialization of rings into rt2x00usb
rt2x00: Move usb_interrupt_rxdone into rt2x00usb
rt2x00: Fix RX skb allocation
rt2x00: KConfig layout correction
rt2x00: Set DEVICE_ENABLED_RADIO_HW when rfkill is disabled
rt2x00: Change word argument for debug_access_t
rt2x00: Suspend/Resume Don't register/reregister device
Merge branch 'wireless-dev'
rt2x00: Fix CTS frame requirement detection
rt2x00: Don't cut FCS in RX frames
rt2x00: Use delayed_work_pending
rt2x00: Don't enable/disable link tuner twice
rt2x00: Release 2.0.3
drivers/net/wireless/mac80211/rt2x00/Kconfig | 91 ++++----
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 167 ++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 45 ++--
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 191 +++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 54 +++--
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 176 ++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 61 +++--
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 141 +++++++----
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 86 +------
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 77 ++----
.../net/wireless/mac80211/rt2x00/rt2x00firmware.h | 6 -
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 131 ++++------
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 52 ++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 16 +-
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 62 +++--
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.h | 7 +
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 156 +++++++++---
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 264 +++++++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 77 ++++--
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 242 ++++++++++---------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 81 ++++---
23 files changed, 1166 insertions(+), 1026 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-07-20 8:11 Ivo van Doorn
@ 2007-07-20 8:13 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-07-20 8:13 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi,
One additional note I forgot to mention:
> The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
> Johannes Berg (1):
> mac80211: regdomain.c needs to include ieee80211_i.h
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master
Please note the new location of the Git repository ;)
Because of problems with the git.serialmonkey repository
we have now moved to git.kernel.org. :)
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-07-25 20:49 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-07-25 20:49 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes
regarding the USB ID and the rt61pci interrupts.
The latter one (hopefully) resolves an bugreport recently
raised in the Fedora Bugzilla. (I'll update the report in a few seconds)
And yes I have read the mails of today regarding patch submissions,
so I'll start sending the individual patches as well along with this pull request. ;)
Short note about the state of rt2x00:
- Code cleaning is progressing, next version will probably contain
the result of Lindent run. But after that I don't expect big changes regarding
code style.
- Writing "Magical" values to the registers has been reduced as much as possible,
most values that are still magical are really magic and I have no clue on what they
exactly mean, except that those values should be written. ;)
- Suspend/resume is completely broken. I am not sure how the device should
correctly suspend/resume. Most important points on this area are
deregistering/registering ieee80211_hw and reassociation after resume.
I am gathering some more info on this, and will post a bigger report on the mailinglist
in a few days.
- Statistics reading. Noise and Signal are still empty...
It would really be nice to have some value to report for these statistics.
- Bug reports show definite progress, rt2x00 doesn't really seem to break things,
but neither is it doing a usefull things...
Ivo
---
The following changes since commit 9cc4f5142dd983d178b158e782d5e60900e48270:
Michael Wu (1):
mac80211: use more GFP_KERNEL instead of GFP_ATOMIC
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: Don't export unneeded symbols
Ivo van Doorn (13):
rt2x00: Check permissions on debugfs write
Merge branch 'wireless-dev'
rt2x00: Use rts_cts_rate for CTS frames
rt2x00: Cleanup allocation/initialization
rt2x00: rt61pci interrupts are called on MCU CMD done
rt2x00: Reduce requirement for debugfs wrapper functions
rt2x00: Don't toggle promisc mode in link_tuner
rt2x00: Fix MAC address initialization for multiple interfaces
Merge branch 'wireless-dev'
rt2x00: Check for all errors on RXdone
rt2x00: Parse chipset revision for RT chip validation
rt2x00: Release 2.0.4
Merge branch 'wireless-dev'
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 83 +--
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 90 +---
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 105 ++---
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 17 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 237 +++------
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 27 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 560 ++++++++++----------
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 57 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 58 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 126 +++--
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 99 ++---
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 100 ++---
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 2 +-
19 files changed, 731 insertions(+), 842 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2007-07-31 18:36 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a new release of rt2x00: 2.0.5
Don't let the 25 patches fool you, there are 2 _very_ big patches among them. ;)
The 2 biggest are (as announced earlier) the results of a Lindent run,
and the result of a code cleanup. After those 2 patches the code is hopefully
clean enough to be accepted upstream when rt2x00 is a bit more stable.
In any case further code cleanup patches won't/shouldn't be so big anymore.
Some interesting features in this release:
- rt73usb no longer crashes in adhoc mode (But neither does it work)
- rf registers can now be read/written through debugfs
- Monitor interfaces should now capture everything
- Signal reporting
- Correct suspend/resume handling
Ivo
---
The following changes since commit 6e46e62d22ed4b5282d3b9592483e901a9f2643f:
Zhu Yi (1):
iwlwifi: update version stamp to 0.1.5
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (25):
rt2x00: Remove rt73usb_get_tsf
rt2x00: Put rf register value detection in function
rt2x00: Don't toggle tuner bit for non-RF2523 chips
rt2x00: Add reset_tuner handler
rt2x00: rt2500usb needs to reset BBP 24, 25 and 61
rt2x00: Cleanup RF register reading/writing
rt2x00: Add RF register contents to Debugfs
rt2x00: Fix invalid RF array reading
rt2x00: Increase RF_SIZE
rt2x00: rt2x00pci should use rf_size
rt2x00: Correctly handle RF 0 writing
rt2x00: Rename init_hw -> probe_hw
rt2x00: Move interface init/deinit into rt2x00dev
rt2x00: Fix interface opening/closing on suspend/resume
rt2x00: Lindent
rt2x00: Call all configure handlers during resume
rt2x00: Big rt2x00 cleanup
rt2x00: Add Multicast/Broadcast filtering
rt2x00: Include <linux/delay.h>
rt2x00: Periodically read statistics
rt2x00: Don't check for preamble in RXdone
rt2x00: Configure type during add_interface
rt2x00: Add Signal reporting
rt2x00: rt2x00 2.0.5
Merge branch 'wireless-dev'
drivers/net/wireless/Makefile | 2 +-
drivers/net/wireless/rt2400pci.c | 620 +++++++++++----------
drivers/net/wireless/rt2400pci.h | 3 +-
drivers/net/wireless/rt2500pci.c | 695 +++++++++++++-----------
drivers/net/wireless/rt2500pci.h | 2 +
drivers/net/wireless/rt2500usb.c | 686 +++++++++++++-----------
drivers/net/wireless/rt2500usb.h | 35 +-
drivers/net/wireless/rt2x00.h | 861 +++++++++---------------------
drivers/net/wireless/rt2x00config.c | 177 ++++++
drivers/net/wireless/rt2x00debug.c | 101 +++--
drivers/net/wireless/rt2x00debug.h | 32 +-
drivers/net/wireless/rt2x00dev.c | 470 +++++++++++------
drivers/net/wireless/rt2x00dev.h | 59 --
drivers/net/wireless/rt2x00firmware.c | 45 +-
drivers/net/wireless/rt2x00firmware.h | 43 --
drivers/net/wireless/rt2x00lib.h | 137 +++---
drivers/net/wireless/rt2x00mac.c | 283 +++++-----
drivers/net/wireless/rt2x00pci.c | 140 +++--
drivers/net/wireless/rt2x00pci.h | 38 +-
drivers/net/wireless/rt2x00reg.h | 270 +++++++++
drivers/net/wireless/rt2x00rfkill.c | 41 +-
drivers/net/wireless/rt2x00rfkill.h | 58 --
drivers/net/wireless/rt2x00ring.h | 242 ++++++++
drivers/net/wireless/rt2x00usb.c | 177 ++++---
drivers/net/wireless/rt2x00usb.h | 40 +-
drivers/net/wireless/rt61pci.c | 966 +++++++++++++++++----------------
drivers/net/wireless/rt61pci.h | 3 +-
drivers/net/wireless/rt73usb.c | 870 ++++++++++++++++--------------
drivers/net/wireless/rt73usb.h | 3 +-
29 files changed, 3870 insertions(+), 3229 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00config.c
delete mode 100644 drivers/net/wireless/rt2x00dev.h
delete mode 100644 drivers/net/wireless/rt2x00firmware.h
create mode 100644 drivers/net/wireless/rt2x00reg.h
delete mode 100644 drivers/net/wireless/rt2x00rfkill.h
create mode 100644 drivers/net/wireless/rt2x00ring.h
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-07-31 18:36 Ivo van Doorn
@ 2007-08-01 17:05 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-08-01 17:05 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Thanks for the quick pull on rt2x00.git,
but I have a short question:
> Ivo van Doorn (25):
> rt2x00: Remove rt73usb_get_tsf
> rt2x00: Put rf register value detection in function
> rt2x00: Don't toggle tuner bit for non-RF2523 chips
> rt2x00: Add reset_tuner handler
> rt2x00: rt2500usb needs to reset BBP 24, 25 and 61
> rt2x00: Cleanup RF register reading/writing
> rt2x00: Add RF register contents to Debugfs
> rt2x00: Fix invalid RF array reading
> rt2x00: Increase RF_SIZE
> rt2x00: rt2x00pci should use rf_size
> rt2x00: Correctly handle RF 0 writing
> rt2x00: Rename init_hw -> probe_hw
> rt2x00: Move interface init/deinit into rt2x00dev
> rt2x00: Fix interface opening/closing on suspend/resume
> rt2x00: Lindent
> rt2x00: Call all configure handlers during resume
> rt2x00: Big rt2x00 cleanup
> rt2x00: Add Multicast/Broadcast filtering
> rt2x00: Include <linux/delay.h>
> rt2x00: Periodically read statistics
> rt2x00: Don't check for preamble in RXdone
> rt2x00: Configure type during add_interface
> rt2x00: Add Signal reporting
The above have been merged nicely,
but where did the following patch go to?
> rt2x00: rt2x00 2.0.5
Was this intentionally dropped,
or was there a weird git problem somewhere?
Thanks,
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-08-02 15:45 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-08-02 15:45 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is rt2x00 version 2.0.6,
unfortunately 2.0.5 was broken and unusable.
Problem has been found and fixed, so together with
some other small changes here is 2.0.6 :)
This one should be safe to be merged with FC kernels. ;)
Ivo
---
The following changes since commit 515c4dbee8271ff66fde61304309b1992e430502:
John W. Linville (1):
Merge branch 'upstream' of git://git.kernel.org/.../ivd/rt2x00
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (7):
Merge branch 'wireless-dev'
rt2x00: Add new USB ID for Buffalo rt73usb
rt2x00: Update rssi before signal calculation
rt2x00: Return 0 when the offset != 0
rt2x00: rt2x00lib_config_mac_addr should call config_mac
rt2x00: Release rt2x00 2.0.6
Merge branch 'wireless-dev'
drivers/net/wireless/rt2x00.h | 2 +-
drivers/net/wireless/rt2x00config.c | 4 ++--
drivers/net/wireless/rt2x00debug.c | 6 ++++++
drivers/net/wireless/rt2x00dev.c | 2 +-
drivers/net/wireless/rt73usb.c | 2 ++
5 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00.h b/drivers/net/wireless/rt2x00.h
index c5c1773..77556fe 100644
--- a/drivers/net/wireless/rt2x00.h
+++ b/drivers/net/wireless/rt2x00.h
@@ -41,7 +41,7 @@
* Module information.
* DRV_NAME should be set within the individual module source files.
*/
-#define DRV_VERSION "2.0.5"
+#define DRV_VERSION "2.0.6"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
diff --git a/drivers/net/wireless/rt2x00config.c b/drivers/net/wireless/rt2x00config.c
index 3733a84..11d5646 100644
--- a/drivers/net/wireless/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00config.c
@@ -37,13 +37,13 @@
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac)
{
if (mac)
- rt2x00dev->ops->lib->config_bssid(rt2x00dev, mac);
+ rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, mac);
}
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
{
if (bssid)
- rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, bssid);
+ rt2x00dev->ops->lib->config_bssid(rt2x00dev, bssid);
}
void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter)
diff --git a/drivers/net/wireless/rt2x00debug.c b/drivers/net/wireless/rt2x00debug.c
index ffc95bb..d6c4cfe 100644
--- a/drivers/net/wireless/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00debug.c
@@ -124,6 +124,9 @@ static ssize_t rt2x00debug_read_##__name(struct file *file, \
size_t size; \
__type value; \
\
+ if (*offset) \
+ return 0; \
+ \
if (intf->offset_##__name > debug->__name.word_count) \
return -EINVAL; \
\
@@ -151,6 +154,9 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \
size_t size; \
__type value; \
\
+ if (*offset) \
+ return 0; \
+ \
if (!capable(CAP_NET_ADMIN)) \
return -EPERM; \
\
diff --git a/drivers/net/wireless/rt2x00dev.c b/drivers/net/wireless/rt2x00dev.c
index a584fbe..28ddbe0 100644
--- a/drivers/net/wireless/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00dev.c
@@ -349,11 +349,11 @@ void rt2x00lib_rxdone(struct data_entry *entry, char *data,
}
}
+ rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
rt2x00dev->link.rx_success++;
rx_status->rate = val;
rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev);
rx_status->ssi = rssi;
- rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
/*
* Let's allocate a sk_buff where we can store the received data in,
diff --git a/drivers/net/wireless/rt73usb.c b/drivers/net/wireless/rt73usb.c
index 48fb38e..2f0bf29 100644
--- a/drivers/net/wireless/rt73usb.c
+++ b/drivers/net/wireless/rt73usb.c
@@ -1884,6 +1884,8 @@ static struct usb_device_id rt73usb_device_table[] = {
{ USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Buffalo */
+ { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
^ permalink raw reply related [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-08-19 18:18 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-08-19 18:18 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Well finally rt2x00 2.0.7 is released, unfortunately it will
not be the last release in the 2.0.* series as promised earlier.
This series contains lots of bugfixes, but some of the more
critical issues are still present. rt2x00 is however becoming
more usable for more people, so the progress is there. ;)
I'll do my best to make the next release 2.0.8 the last in the
2.0.* series so 2.1.0 can be moved upstream. :)
Ivo
---
The following changes since commit f5a420590f3f6a45ee5bca0048640f0f24852315:
John W. Linville (1):
Merge branch 'b43' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (27):
rt2x00: Correctly configure packet filter in monitor mode
rt2x00: Clear MAC and BSSID when non-monitor interface goes down
rt2x00: Check return value of usb_control_msg()
rt2x00: Clear all fields on start_link_tune()
rt2x00: Don't increase rx_failed for individual frames
rt2x00: Set vgc_level during reset_tuner
rt2x00: Schedule beacon update
rt2x00: Be consistent with unsigned
rt2x00: Correctly reset TX/RX success/failed counters
rt2x00: Rework RF register handling
rt2x00: rt2x00_ring_free returns invalid length
rt2x00: Use caching for USB transfers
rt2x00: Cleanup set_state for rt61 and rt73
rt2x00: Fix register initialization ordering
rt2x00: memset descriptor before use
rt2x00: Remove IEEE80211_HW_WEP_INCLUDE_IV flag
rt2x00: Cleanup TXD flags
rt2x00: Add byte-ordering annotation for MAC and BSSID
rt2x00: Correctly set TXD retry flag
rt2x00: Move rt2x00 files into rt2x00 folder
rt2x00: Add file pattern to MAINTAINER entry
rt2x00: Fix PLCP setup
rt2x00: Clean up RATEMASK handling
rt2x00: Add rt2x00lib_reset_link_tuner()
rt2x00: Always check if mac80211 requested TX status update
rt2x00: Lindent
rt2x00: rt2x00 2.0.7
Luca Tettamanti (1):
Fix off-by-one error in debugfs helpers
Mattias Nissler (2):
rt2x00: Fix width of filter field.
rt2x00: Store firmware in memory
MAINTAINERS | 1 +
drivers/net/wireless/Kconfig | 131 +------
drivers/net/wireless/Makefile | 23 +-
drivers/net/wireless/rt2x00/Kconfig | 130 ++++++
drivers/net/wireless/rt2x00/Makefile | 22 +
drivers/net/wireless/{ => rt2x00}/rt2400pci.c | 149 ++++---
drivers/net/wireless/{ => rt2x00}/rt2400pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2500pci.c | 409 ++++++++++--------
drivers/net/wireless/{ => rt2x00}/rt2500pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2500usb.c | 382 +++++++++-------
drivers/net/wireless/{ => rt2x00}/rt2500usb.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00.h | 56 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00config.c | 14 +-
drivers/net/wireless/{ => rt2x00}/rt2x00debug.c | 23 +-
drivers/net/wireless/{ => rt2x00}/rt2x00debug.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00dev.c | 221 ++++++----
drivers/net/wireless/{ => rt2x00}/rt2x00firmware.c | 43 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00lib.h | 5 +
drivers/net/wireless/{ => rt2x00}/rt2x00mac.c | 15 +-
drivers/net/wireless/{ => rt2x00}/rt2x00pci.c | 7 +-
drivers/net/wireless/{ => rt2x00}/rt2x00pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00reg.h | 56 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00rfkill.c | 0
drivers/net/wireless/{ => rt2x00}/rt2x00ring.h | 6 +-
drivers/net/wireless/{ => rt2x00}/rt2x00usb.c | 114 ++++-
drivers/net/wireless/{ => rt2x00}/rt2x00usb.h | 60 +++-
drivers/net/wireless/{ => rt2x00}/rt61pci.c | 466 ++++++++------------
drivers/net/wireless/{ => rt2x00}/rt61pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt73usb.c | 471 +++++++++++---------
drivers/net/wireless/{ => rt2x00}/rt73usb.h | 0
30 files changed, 1532 insertions(+), 1272 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/Kconfig
create mode 100644 drivers/net/wireless/rt2x00/Makefile
rename drivers/net/wireless/{ => rt2x00}/rt2400pci.c (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2400pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2500pci.c (84%)
rename drivers/net/wireless/{ => rt2x00}/rt2500pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2500usb.c (81%)
rename drivers/net/wireless/{ => rt2x00}/rt2500usb.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00.h (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00config.c (92%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00debug.c (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00debug.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00dev.c (85%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00firmware.c (84%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00lib.h (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00mac.c (97%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00pci.c (98%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00reg.h (80%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00rfkill.c (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00ring.h (96%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00usb.c (85%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00usb.h (65%)
rename drivers/net/wireless/{ => rt2x00}/rt61pci.c (89%)
rename drivers/net/wireless/{ => rt2x00}/rt61pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt73usb.c (82%)
rename drivers/net/wireless/{ => rt2x00}/rt73usb.h (100%)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-09-16 12:17 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-16 12:17 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
It has taken some time to finally release this,
but it contains quite a lot of bugfixes of variating impact.
Overall the stability has been greatly improved,
although there are still some nasty bugs in there.
Note that even after this update rt2x00 in wireless-dev will still not work
for encrypted networks. This is because rt2x00 depends on the encryption
patches by Johannes which are pending for wireless-dev inclusion
(Most notably the patch that fixes the IEEE80211_HW_WEP_INCLUDE_IV
behavior is required to make it work again).
Ivo
---
The following changes since commit e6d77b902151278df6a670b460a32e7cc6b75e9e:
Luis R. Rodriguez (1):
Merge branch 'ath5k' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (24):
rt2x00: Remove firmware not-NULL check
rt2x00: Don't check for IEEE80211_TXCTL_REQ_TX_STATUS
rt2x00: Cleanup rxdone
rt2x00: Don't allow configuration calls when uninitialized
rt2x00: Fix rt61pci and rt73usb beacon handling
rt2x00: Recalculate link quality
rt2x00: Cleanup entry->flags
rt2x00: Reduce LNA flags
rt2x00: Rework RT61 and RT73 Antenna handling
rt2x00: Rename DEVICE_SUPPORT_ATIM to REQUIRE_BEACON_RING
rt2x00: Remove rt2x00mac_reset()
rt2x00: Fix system freeze on device removal
rt2x00: Reduce magic value writing to device
rt2x00: New USB ID's for rt73usb and rt2500usb
rt2x00: Beacon ring entries should have QID_MGMT
rt2x00: Fix DEV_RATEBIT_ definitions
rt2x00: Fix rfkill handling
rt2x00: Merge allocation/free register components
rt2x00: macro's shouldn't use hidden arguments
rt2x00: Fix channel initialization
rt2x00: Add better CONFIG_PM checks
rt2x00: Add start/stop handlers
rt2x00: Add additional bit to MAX_FRAME_UNIT
rt2x00: Release rt2x00 2.0.8
drivers/net/wireless/rt2x00/rt2400pci.c | 37 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 83 +++--
drivers/net/wireless/rt2x00/rt2500pci.h | 40 ++-
drivers/net/wireless/rt2x00/rt2500usb.c | 208 ++++++++--
drivers/net/wireless/rt2x00/rt2500usb.h | 39 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 47 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 12 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 26 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 308 ++++++--------
drivers/net/wireless/rt2x00/rt2x00firmware.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 111 ++++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 127 ++----
drivers/net/wireless/rt2x00/rt2x00pci.h | 3 +
drivers/net/wireless/rt2x00/rt2x00reg.h | 27 +-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 29 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 235 +++--------
drivers/net/wireless/rt2x00/rt2x00usb.h | 9 +-
drivers/net/wireless/rt2x00/rt61pci.c | 617 ++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt61pci.h | 87 ++++-
drivers/net/wireless/rt2x00/rt73usb.c | 471 +++++++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 65 +++-
23 files changed, 1615 insertions(+), 982 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-09-25 18:52 Ivo van Doorn
2007-09-25 18:53 ` [PATCH 1/12] rt2x00: Correct error in calculating rssi for link tuner Ivo van Doorn
` (11 more replies)
0 siblings, 12 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:52 UTC (permalink / raw)
To: John W. Linville, linux-wireless, rt2400-devel
Hi John,
(Finally) the rt2x00 2.0.9 release containing the patches
for the API changes from the mac80211-misc git tree.
NOTE: currently rt2x00.git is branched off from the mac80211-misc
tree to make the porting easier and to allow early testing.
So you might want to pull that tree before pulling rt2x00.
This release contains several bug fixes especially some kernel
panics during rmmod have been fixed by Modestas Vainius.
---
The following changes since commit 4cceb887147261d7fd9fe7ce3b6d6f236c8300bc:
Michael Wu (1):
adm8211: Adapt to filter configuration API
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (11):
rt2x00: Correct error in calculating rssi for link tuner
rt2x00: Make *_beacon_update static
rt2x00: Increase rt2x00usb_vendor_request timeout.
rt2x00: Correctly identify rt2561turbo
rt2x00: adapt to filter configuration API
rt2x00: Reorganize rt2x00dev->flags
rt2x00: Add rt2x00dev->flags to debugfs
rt2x00: Stop link tuning when radio is down
rt2x00: Fix obvious typo in comment
rt2x00: Fix panic on rmmod with rfkill enabled
rt2x00: Release rt2x00 2.0.9
Modestas Vainius (1):
rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work
drivers/net/wireless/rt2x00/rt2400pci.c | 159 +++++++++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 171 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 181 ++++++++++++++++------------
drivers/net/wireless/rt2x00/rt2x00.h | 70 ++++-------
drivers/net/wireless/rt2x00/rt2x00config.c | 75 +-----------
drivers/net/wireless/rt2x00/rt2x00debug.c | 37 ++++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 109 +++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 155 ++++++++----------------
drivers/net/wireless/rt2x00/rt2x00pci.c | 31 ++---
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 14 +--
drivers/net/wireless/rt2x00/rt2x00ring.h | 17 +++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 26 ++---
drivers/net/wireless/rt2x00/rt2x00usb.h | 8 +-
drivers/net/wireless/rt2x00/rt61pci.c | 172 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.c | 179 ++++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.h | 2 +-
17 files changed, 728 insertions(+), 682 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* [PATCH 1/12] rt2x00: Correct error in calculating rssi for link tuner
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
@ 2007-09-25 18:53 ` Ivo van Doorn
2007-09-25 18:53 ` [PATCH 2/12] rt2x00: Make *_beacon_update static Ivo van Doorn
` (10 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:53 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
The call to rt2x00lib_precalculate_link_signal resets link.rx_success which is needed
when calculating the average rssi for the link tuner. Change the call order so the link
tuner runs first as it doesn't need the result of the precalculate.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index cd82eef..5780d6a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -240,8 +240,6 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
rt2x00dev->low_level_stats.dot11FCSErrorCount +=
rt2x00dev->link.rx_failed;
- rt2x00lib_precalculate_link_signal(&rt2x00dev->link);
-
/*
* Only perform the link tuning when Link tuning
* has been enabled (This could have been disabled from the EEPROM).
@@ -250,6 +248,12 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
rt2x00dev->ops->lib->link_tuner(rt2x00dev);
/*
+ * Precalculate a portion of the link signal which is
+ * in based on the tx/rx success/failure counters.
+ */
+ rt2x00lib_precalculate_link_signal(&rt2x00dev->link);
+
+ /*
* Increase tuner counter, and reschedule the next link tuner run.
*/
rt2x00dev->link.count++;
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 2/12] rt2x00: Make *_beacon_update static
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-09-25 18:53 ` [PATCH 1/12] rt2x00: Correct error in calculating rssi for link tuner Ivo van Doorn
@ 2007-09-25 18:53 ` Ivo van Doorn
2007-09-25 18:54 ` [PATCH 3/12] rt2x00: Increase rt2x00usb_vendor_request timeout Ivo van Doorn
` (9 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:53 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Make rt61pci_beacon_update and rt73usb_beacon_update static,
they are only used inside their own source file and then only
for setting it as callback funtion for mac80211.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 09c8c96..69ed178 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2462,7 +2462,7 @@ static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
}
-int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 3397881..890b449 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1939,7 +1939,7 @@ static void rt73usb_reset_tsf(struct ieee80211_hw *hw)
rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0);
}
-int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 3/12] rt2x00: Increase rt2x00usb_vendor_request timeout.
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-09-25 18:53 ` [PATCH 1/12] rt2x00: Correct error in calculating rssi for link tuner Ivo van Doorn
2007-09-25 18:53 ` [PATCH 2/12] rt2x00: Make *_beacon_update static Ivo van Doorn
@ 2007-09-25 18:54 ` Ivo van Doorn
2007-09-25 18:54 ` [PATCH 4/12] rt2x00: Correctly identify rt2561turbo Ivo van Doorn
` (8 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:54 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
By increasing the timeout for rt2x00usb_vendor_request,
we should limit the number of loops required to send
a signal to the device succefully.
500ms timeout is specified by the Ralink legacy drivers
for rt2500usb. For rt73usb 1000ms is specified, but that
includes the timeout for the firmware which is already
specified in a different define.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00usb.c | 10 ++++------
drivers/net/wireless/rt2x00/rt2x00usb.h | 8 ++++----
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index a0f05ca..248144f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -42,7 +42,7 @@ int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, const u16 value,
void *buffer, const u16 buffer_length,
- u16 timeout)
+ const int timeout)
{
struct usb_device *usb_dev =
interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
@@ -60,12 +60,10 @@ int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
return 0;
/*
- * Check for errors,
- * -ETIMEDOUT: We need a bit more time to complete.
+ * Check for errors
* -ENODEV: Device has disappeared, no point continuing.
+ * All other errors: Try again.
*/
- if (status == -ETIMEDOUT)
- timeout *= 2;
else if (status == -ENODEV)
break;
}
@@ -81,7 +79,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);
int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, void *buffer,
- const u16 buffer_length, u16 timeout)
+ const u16 buffer_length, const int timeout)
{
int status;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index d4113e5..2681abe 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -44,7 +44,7 @@
*/
#define REGISTER_BUSY_COUNT 5
#define REGISTER_BUSY_DELAY 100
-#define REGISTER_TIMEOUT 20
+#define REGISTER_TIMEOUT 500
#define REGISTER_TIMEOUT_FIRMWARE 1000
/*
@@ -95,7 +95,7 @@ int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, const u16 value,
void *buffer, const u16 buffer_length,
- u16 timeout);
+ const int timeout);
/*
* Used to read/write from/to the device.
@@ -110,7 +110,7 @@ int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
const u8 request, const u8 requesttype,
const u16 offset, void *buffer,
- const u16 buffer_length, u16 timeout);
+ const u16 buffer_length, const int timeout);
/*
* Simple wrapper around rt2x00usb_vendor_request to write a single
@@ -122,7 +122,7 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
const u8 request,
const u16 offset,
const u16 value,
- int timeout)
+ const int timeout)
{
return rt2x00usb_vendor_request(rt2x00dev, request,
USB_VENDOR_REQUEST_OUT, offset,
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 4/12] rt2x00: Correctly identify rt2561turbo
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (2 preceding siblings ...)
2007-09-25 18:54 ` [PATCH 3/12] rt2x00: Increase rt2x00usb_vendor_request timeout Ivo van Doorn
@ 2007-09-25 18:54 ` Ivo van Doorn
2007-09-25 18:55 ` [PATCH 5/12] rt2x00: adapt to filter configuration API Ivo van Doorn
` (7 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:54 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Apparently rt2561s actually has PCI ID 0x0301
and rt2561 actually has PCI ID 0x0302.
Where rt2561s supports Turbo.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 80b079d..2609d4a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -159,8 +159,8 @@ struct rt2x00_chip {
#define RT2460 0x0101
#define RT2560 0x0201
#define RT2570 0x1201
-#define RT2561 0x0301
-#define RT2561s 0x0302
+#define RT2561s 0x0301 /* Turbo */
+#define RT2561 0x0302
#define RT2661 0x0401
#define RT2571 0x1300
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 5/12] rt2x00: adapt to filter configuration API
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (3 preceding siblings ...)
2007-09-25 18:54 ` [PATCH 4/12] rt2x00: Correctly identify rt2561turbo Ivo van Doorn
@ 2007-09-25 18:55 ` Ivo van Doorn
2007-09-25 18:55 ` [PATCH 6/12] rt2x00: Reorganize rt2x00dev->flags Ivo van Doorn
` (6 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:55 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
This will make sure rt2x00 will follow the new mac80211 API
concerning the packet filter.
This new API cleans up quite a lot of code in rt2x00.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 155 +++++++++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 165 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 179 ++++++++++++++++------------
drivers/net/wireless/rt2x00/rt2x00.h | 37 ++----
drivers/net/wireless/rt2x00/rt2x00config.c | 60 +---------
drivers/net/wireless/rt2x00/rt2x00dev.c | 33 ++++--
drivers/net/wireless/rt2x00/rt2x00lib.h | 1 -
drivers/net/wireless/rt2x00/rt2x00mac.c | 104 ++--------------
drivers/net/wireless/rt2x00/rt2x00pci.c | 31 ++---
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 17 +++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 16 +--
drivers/net/wireless/rt2x00/rt61pci.c | 164 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.c | 175 +++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.h | 2 +-
15 files changed, 556 insertions(+), 589 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 398c201..03a94a3 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -277,55 +277,14 @@ static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt2x00pci_register_multiwrite(rt2x00dev, CSR5, ®, sizeof(reg));
}
-static void rt2400pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter)
-{
- int promisc = !!(filter & IFF_PROMISC);
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, !promisc);
- rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-}
-
static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, int type)
{
+ struct interface *intf = &rt2x00dev->interface;
u32 reg;
rt2x00pci_register_write(rt2x00dev, CSR14, 0);
/*
- * Apply hardware packet filter.
- */
- rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
-
- if (!is_monitor_present(&rt2x00dev->interface) &&
- (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
- rt2x00_set_field32(®, RXCSR0_DROP_TODS, 1);
- else
- rt2x00_set_field32(®, RXCSR0_DROP_TODS, 0);
-
- /*
- * If there is a non-monitor interface present
- * the packet should be strict (even if a monitor interface is present!).
- * When there is only 1 interface present which is in monitor mode
- * we should start accepting _all_ frames.
- */
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, RXCSR0_DROP_CRC, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1);
- } else if (is_monitor_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, RXCSR0_DROP_CRC, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 0);
- }
-
- rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-
- /*
* Enable beacon config
*/
rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®);
@@ -337,20 +296,16 @@ static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, int type)
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
- rt2x00_set_field32(®, CSR14_TBCN, 1);
- }
-
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
- if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) ||
+ is_interface_type(intf, IEEE80211_IF_TYPE_AP))
rt2x00_set_field32(®, CSR14_TSF_SYNC, 2);
- else if (type == IEEE80211_IF_TYPE_STA)
+ else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field32(®, CSR14_TSF_SYNC, 1);
- else if (is_monitor_present(&rt2x00dev->interface) &&
- !is_interface_present(&rt2x00dev->interface))
+ else
rt2x00_set_field32(®, CSR14_TSF_SYNC, 0);
-
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
@@ -1104,7 +1059,7 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
@@ -1200,8 +1155,8 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
/*
* RX control handlers
*/
-static int rt2400pci_fill_rxdone(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size)
+static void rt2400pci_fill_rxdone(struct data_entry *entry,
+ struct rxdata_entry_desc *desc)
{
struct data_desc *rxd = entry->priv;
u32 word0;
@@ -1210,20 +1165,20 @@ static int rt2400pci_fill_rxdone(struct data_entry *entry,
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 2, &word2);
- if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
- return -EINVAL;
+ desc->flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+ desc->flags |= RX_FLAG_FAILED_PLCP_CRC;
/*
* Obtain the status about this packet.
*/
- *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
- *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
+ desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
+ desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
entry->ring->rt2x00dev->rssi_offset;
- *ofdm = 0;
- *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
-
- return 0;
+ desc->ofdm = 0;
+ desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
}
/*
@@ -1460,10 +1415,7 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize all hw fields.
*/
- rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_MONITOR_DURING_OPER |
- IEEE80211_HW_NO_PROBE_FILTERING;
+ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = 0;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
@@ -1530,6 +1482,68 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
+static void rt2400pci_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct interface *intf = &rt2x00dev->interface;
+ u32 reg;
+
+ /*
+ * Mask off any flags we are going to ignore from
+ * the total_flags field.
+ */
+ *total_flags &=
+ FIF_ALLMULTI |
+ FIF_FCSFAIL |
+ FIF_PLCPFAIL |
+ FIF_CONTROL |
+ FIF_OTHER_BSS |
+ FIF_PROMISC_IN_BSS;
+
+ /*
+ * Apply some rules to the filters:
+ * - Some filters imply different filters to be set.
+ * - Some things we can't filter out at all.
+ * - Some filters are set based on interface type.
+ */
+ *total_flags |= FIF_ALLMULTI;
+ if (changed_flags & FIF_OTHER_BSS ||
+ changed_flags & FIF_PROMISC_IN_BSS)
+ *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
+ *total_flags |= FIF_PROMISC_IN_BSS;
+
+ /*
+ * Check if there is any work left for us.
+ */
+ if (intf->filter == *total_flags)
+ return;
+ intf->filter = *total_flags;
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * since there is no filter for it at this time.
+ */
+ rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
+ rt2x00_set_field32(®, RXCSR0_DROP_CRC,
+ !(*total_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL,
+ !(*total_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, RXCSR0_DROP_CONTROL,
+ !(*total_flags & FIF_CONTROL));
+ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, RXCSR0_DROP_TODS,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1);
+ rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+}
+
static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
@@ -1602,11 +1616,13 @@ static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .set_multicast_list = rt2x00mac_set_multicast_list,
+ .configure_filter = rt2400pci_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt2400pci_set_retry_limit,
.conf_tx = rt2400pci_conf_tx,
@@ -1635,7 +1651,6 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
.fill_rxdone = rt2400pci_fill_rxdone,
.config_mac_addr = rt2400pci_config_mac_addr,
.config_bssid = rt2400pci_config_bssid,
- .config_packet_filter = rt2400pci_config_packet_filter,
.config_type = rt2400pci_config_type,
.config = rt2400pci_config,
};
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e8d63aa..892baa9 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -277,59 +277,14 @@ static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt2x00pci_register_multiwrite(rt2x00dev, CSR5, ®, sizeof(reg));
}
-static void rt2500pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter)
-{
- int promisc = !!(filter & IFF_PROMISC);
- int multicast = !!(filter & IFF_MULTICAST);
- int broadcast = !!(filter & IFF_BROADCAST);
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, !promisc);
- rt2x00_set_field32(®, RXCSR0_DROP_MCAST, !multicast);
- rt2x00_set_field32(®, RXCSR0_DROP_BCAST, !broadcast);
- rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-}
-
static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
{
+ struct interface *intf = &rt2x00dev->interface;
u32 reg;
rt2x00pci_register_write(rt2x00dev, CSR14, 0);
/*
- * Apply hardware packet filter.
- */
- rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
-
- if (!is_monitor_present(&rt2x00dev->interface) &&
- (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
- rt2x00_set_field32(®, RXCSR0_DROP_TODS, 1);
- else
- rt2x00_set_field32(®, RXCSR0_DROP_TODS, 0);
-
- /*
- * If there is a non-monitor interface present
- * the packet should be strict (even if a monitor interface is present!).
- * When there is only 1 interface present which is in monitor mode
- * we should start accepting _all_ frames.
- */
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, RXCSR0_DROP_CRC, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 1);
- rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1);
- } else if (is_monitor_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, RXCSR0_DROP_CRC, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, 0);
- rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 0);
- }
-
- rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-
- /*
* Enable beacon config
*/
rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®);
@@ -345,20 +300,16 @@ static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
- rt2x00_set_field32(®, CSR14_TBCN, 1);
- }
-
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
- if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) ||
+ is_interface_type(intf, IEEE80211_IF_TYPE_AP))
rt2x00_set_field32(®, CSR14_TSF_SYNC, 2);
- else if (type == IEEE80211_IF_TYPE_STA)
+ else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field32(®, CSR14_TSF_SYNC, 1);
- else if (is_monitor_present(&rt2x00dev->interface) &&
- !is_interface_present(&rt2x00dev->interface))
+ else
rt2x00_set_field32(®, CSR14_TSF_SYNC, 0);
-
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
@@ -1269,7 +1220,7 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
@@ -1349,8 +1300,8 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
/*
* RX control handlers
*/
-static int rt2500pci_fill_rxdone(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size)
+static void rt2500pci_fill_rxdone(struct data_entry *entry,
+ struct rxdata_entry_desc *desc)
{
struct data_desc *rxd = entry->priv;
u32 word0;
@@ -1359,18 +1310,17 @@ static int rt2500pci_fill_rxdone(struct data_entry *entry,
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 2, &word2);
- if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_ICV_ERROR))
- return -EINVAL;
+ desc->flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+ desc->flags |= RX_FLAG_FAILED_PLCP_CRC;
- *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
- *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
+ desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
+ desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
entry->ring->rt2x00dev->rssi_offset;
- *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
-
- return 0;
+ desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
}
/*
@@ -1779,10 +1729,7 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize all hw fields.
*/
- rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_MONITOR_DURING_OPER |
- IEEE80211_HW_NO_PROBE_FILTERING;
+ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = 0;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
@@ -1867,6 +1814,73 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
+static void rt2500pci_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct interface *intf = &rt2x00dev->interface;
+ u32 reg;
+
+ /*
+ * Mask off any flags we are going to ignore from
+ * the total_flags field.
+ */
+ *total_flags &=
+ FIF_ALLMULTI |
+ FIF_FCSFAIL |
+ FIF_PLCPFAIL |
+ FIF_CONTROL |
+ FIF_OTHER_BSS |
+ FIF_PROMISC_IN_BSS;
+
+ /*
+ * Apply some rules to the filters:
+ * - Some filters imply different filters to be set.
+ * - Some things we can't filter out at all.
+ * - Some filters are set based on interface type.
+ */
+ if (mc_count)
+ *total_flags |= FIF_ALLMULTI;
+ if (changed_flags & FIF_OTHER_BSS ||
+ changed_flags & FIF_PROMISC_IN_BSS)
+ *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
+ *total_flags |= FIF_PROMISC_IN_BSS;
+
+ /*
+ * Check if there is any work left for us.
+ */
+ if (intf->filter == *total_flags)
+ return;
+ intf->filter = *total_flags;
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt2x00pci_register_read(rt2x00dev, RXCSR0, ®);
+ rt2x00_set_field32(®, RXCSR0_DROP_CRC,
+ !(*total_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL,
+ !(*total_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, RXCSR0_DROP_CONTROL,
+ !(*total_flags & FIF_CONTROL));
+ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, RXCSR0_DROP_TODS,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field32(®, RXCSR0_DROP_MCAST,
+ !(*total_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0);
+ rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+}
+
static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
@@ -1914,11 +1928,13 @@ static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .set_multicast_list = rt2x00mac_set_multicast_list,
+ .configure_filter = rt2500pci_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt2500pci_set_retry_limit,
.conf_tx = rt2x00mac_conf_tx,
@@ -1947,7 +1963,6 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.fill_rxdone = rt2500pci_fill_rxdone,
.config_mac_addr = rt2500pci_config_mac_addr,
.config_bssid = rt2500pci_config_bssid,
- .config_packet_filter = rt2500pci_config_packet_filter,
.config_type = rt2500pci_config_type,
.config = rt2500pci_config,
};
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 614600c..f4e6f6e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -282,65 +282,20 @@ static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, ®, sizeof(reg));
}
-static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter)
-{
- int promisc = !!(filter & IFF_PROMISC);
- int multicast = !!(filter & IFF_MULTICAST);
- int broadcast = !!(filter & IFF_BROADCAST);
- u16 reg;
-
- rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, !promisc);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, !multicast);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, !broadcast);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
-}
-
static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
{
+ struct interface *intf = &rt2x00dev->interface;
u16 reg;
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
/*
- * Apply hardware packet filter.
- */
- rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
-
- if (!is_monitor_present(&rt2x00dev->interface) &&
- (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
- rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 1);
- else
- rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 0);
-
- /*
- * If there is a non-monitor interface present
- * the packet should be strict (even if a monitor interface is present!).
- * When there is only 1 interface present which is in monitor mode
- * we should start accepting _all_ frames.
- */
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 1);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 1);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 1);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1);
- } else if (is_monitor_present(&rt2x00dev->interface)) {
- rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 0);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 0);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 0);
- rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 0);
- }
-
- rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
-
- /*
* Enable beacon config
*/
rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®);
rt2x00_set_field16(®, TXRX_CSR20_OFFSET,
(PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6);
- if (type == IEEE80211_IF_TYPE_STA)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
else
rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
@@ -354,20 +309,16 @@ static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
- rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
- }
-
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
+ rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0);
- if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) ||
+ is_interface_type(intf, IEEE80211_IF_TYPE_AP))
rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 2);
- else if (type == IEEE80211_IF_TYPE_STA)
+ else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 1);
- else if (is_monitor_present(&rt2x00dev->interface) &&
- !is_interface_present(&rt2x00dev->interface))
+ else
rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0);
-
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
}
@@ -1084,7 +1035,7 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
@@ -1156,8 +1107,8 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
/*
* RX control handlers
*/
-static int rt2500usb_fill_rxdone(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size)
+static void rt2500usb_fill_rxdone(struct data_entry *entry,
+ struct rxdata_entry_desc *desc)
{
struct urb *urb = entry->priv;
struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
@@ -1169,21 +1120,22 @@ static int rt2500usb_fill_rxdone(struct data_entry *entry,
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
- if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
- return -EINVAL;
+ desc->flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+ desc->flags |= RX_FLAG_FAILED_PLCP_CRC;
/*
* Obtain the status about this packet.
*/
- *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
+ desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ desc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
entry->ring->rt2x00dev->rssi_offset;
- *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+ desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- return 0;
+ return;
}
/*
@@ -1549,9 +1501,7 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_MONITOR_DURING_OPER |
- IEEE80211_HW_NO_PROBE_FILTERING;
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
@@ -1621,10 +1571,8 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
rt2500usb_probe_hw_mode(rt2x00dev);
/*
- * USB devices require scheduled packet filter toggling
- *This device requires the beacon ring
+ * This device requires the beacon ring
*/
- __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
__set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
@@ -1638,6 +1586,82 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
+static void rt2500usb_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct interface *intf = &rt2x00dev->interface;
+ u16 reg;
+
+ /*
+ * Mask off any flags we are going to ignore from
+ * the total_flags field.
+ */
+ *total_flags &=
+ FIF_ALLMULTI |
+ FIF_FCSFAIL |
+ FIF_PLCPFAIL |
+ FIF_CONTROL |
+ FIF_OTHER_BSS |
+ FIF_PROMISC_IN_BSS;
+
+ /*
+ * Apply some rules to the filters:
+ * - Some filters imply different filters to be set.
+ * - Some things we can't filter out at all.
+ * - Some filters are set based on interface type.
+ */
+ if (mc_count)
+ *total_flags |= FIF_ALLMULTI;
+ if (changed_flags & FIF_OTHER_BSS ||
+ changed_flags & FIF_PROMISC_IN_BSS)
+ *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
+ *total_flags |= FIF_PROMISC_IN_BSS;
+
+ /*
+ * Check if there is any work left for us.
+ */
+ if (intf->filter == *total_flags)
+ return;
+ intf->filter = *total_flags;
+
+ /*
+ * When in atomic context, reschedule and let rt2x00lib
+ * call this function again.
+ */
+ if (in_atomic()) {
+ queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
+ return;
+ }
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC,
+ !(*total_flags & FIF_FCSFAIL));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL,
+ !(*total_flags & FIF_PLCPFAIL));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL,
+ !(*total_flags & FIF_CONTROL));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST,
+ !(*total_flags & FIF_ALLMULTI));
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+}
+
static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct ieee80211_tx_control *control)
@@ -1714,11 +1738,13 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .set_multicast_list = rt2x00mac_set_multicast_list,
+ .configure_filter = rt2500usb_configure_filter,
.get_stats = rt2x00mac_get_stats,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
@@ -1739,7 +1765,6 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.fill_rxdone = rt2500usb_fill_rxdone,
.config_mac_addr = rt2500usb_config_mac_addr,
.config_bssid = rt2500usb_config_bssid,
- .config_packet_filter = rt2500usb_config_packet_filter,
.config_type = rt2500usb_config_type,
.config = rt2500usb_config,
};
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2609d4a..5f05c7e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -294,9 +294,6 @@ struct interface {
/*
* Current working type (IEEE80211_IF_TYPE_*).
- * This excludes the type IEEE80211_IF_TYPE_MNTR
- * since that is counted seperately in the monitor_count
- * field.
* When set to INVALID_INTERFACE, no interface is configured.
*/
int type;
@@ -314,18 +311,8 @@ struct interface {
/*
* Store the packet filter mode for the current interface.
- * monitor mode always disabled filtering. But in such
- * cases we still need to store the value here in case
- * the monitor mode interfaces are removed, while a
- * non-monitor mode interface remains.
*/
- unsigned short filter;
-
- /*
- * Monitor mode count, the number of interfaces
- * in monitor mode that that have been added.
- */
- unsigned short monitor_count;
+ unsigned int filter;
};
static inline int is_interface_present(struct interface *intf)
@@ -333,9 +320,9 @@ static inline int is_interface_present(struct interface *intf)
return !!intf->id;
}
-static inline int is_monitor_present(struct interface *intf)
+static inline int is_interface_type(struct interface *intf, int type)
{
- return !!intf->monitor_count;
+ return intf->type == type;
}
/*
@@ -402,7 +389,7 @@ struct rt2x00lib_ops {
*/
void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control);
@@ -415,8 +402,8 @@ struct rt2x00lib_ops {
/*
* RX control handlers
*/
- int (*fill_rxdone) (struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size);
+ void (*fill_rxdone) (struct data_entry *entry,
+ struct rxdata_entry_desc *desc);
/*
* Configuration handlers.
@@ -511,11 +498,10 @@ struct rt2x00_dev {
#define DEVICE_INITIALIZED 3
#define DEVICE_INITIALIZED_HW 4
#define REQUIRE_FIRMWARE 5
-#define PACKET_FILTER_SCHEDULED 6
-#define PACKET_FILTER_PENDING 7
+/* Hole: Add new Flag here */
#define INTERFACE_RESUME 8
#define INTERFACE_ENABLED 9
-#define INTERFACE_ENABLED_MONITOR 10
+/* Hole: Add new Flag here */
#define REQUIRE_BEACON_RING 11
#define DEVICE_SUPPORT_HW_BUTTON 12
#define CONFIG_FRAME_TYPE 13
@@ -606,9 +592,10 @@ struct rt2x00_dev {
struct ieee80211_rx_status rx_status;
/*
- * Beacon scheduled work.
+ * Scheduled work.
*/
struct work_struct beacon_work;
+ struct work_struct filter_work;
/*
* Data ring arrays for RX, TX and Beacon.
@@ -760,7 +747,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_txdone(struct data_entry *entry,
const int status, const int retry);
void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
- const int signal, const int rssi, const int ofdm);
+ struct rxdata_entry_desc *desc);
/*
* TX descriptor initializer
@@ -785,8 +772,6 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
struct ieee80211_if_conf *conf);
-void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw,
- unsigned short flags, int mc_count);
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index de890a1..f962ce4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -46,72 +46,24 @@ void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt2x00dev->ops->lib->config_bssid(rt2x00dev, bssid);
}
-void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter)
-{
- /*
- * Only configure the device when something has changed,
- * or if we are in RESUME state in which case all configuration
- * will be forced upon the device.
- */
- if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
- !test_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags))
- return;
-
- /*
- * Write configuration to device and clear the update flag.
- */
- rt2x00dev->ops->lib->config_packet_filter(rt2x00dev, filter);
- __clear_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags);
-}
-
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type)
{
struct interface *intf = &rt2x00dev->interface;
- /*
- * Fallback when a invalid interface is attempted to
- * be configured. If a monitor interface is present,
- * we are going configure that, otherwise exit.
- */
- if (type == INVALID_INTERFACE) {
- if (is_monitor_present(intf))
- type = IEEE80211_IF_TYPE_MNTR;
- else
- return;
- }
-
- /*
- * Only configure the device when something has changed,
- * or if we are in RESUME state in which case all configuration
- * will be forced upon the device.
- */
if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
- (!(is_interface_present(intf) ^
- test_bit(INTERFACE_ENABLED, &rt2x00dev->flags)) &&
- !(is_monitor_present(intf) ^
- test_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags))))
+ (!!test_bit(INTERFACE_ENABLED, &rt2x00dev->flags) ==
+ !!is_interface_present(intf)))
return;
- /*
- * Configure device.
- */
rt2x00dev->ops->lib->config_type(rt2x00dev, type);
/*
* Update the configuration flags.
*/
- if (type != IEEE80211_IF_TYPE_MNTR) {
- if (is_interface_present(intf))
- __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
- else
- __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
- } else {
- if (is_monitor_present(intf))
- __set_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags);
- else
- __clear_bit(INTERFACE_ENABLED_MONITOR,
- &rt2x00dev->flags);
- }
+ if (is_interface_present(intf))
+ __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
+ else
+ __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5780d6a..4f66adc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -135,10 +135,12 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
return;
/*
- * Stop beacon generation.
+ * Stop all scheduled work.
*/
if (work_pending(&rt2x00dev->beacon_work))
cancel_work_sync(&rt2x00dev->beacon_work);
+ if (work_pending(&rt2x00dev->filter_work))
+ cancel_work_sync(&rt2x00dev->filter_work);
/*
* Stop the TX queues.
@@ -261,6 +263,17 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
LINK_TUNE_INTERVAL);
}
+static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, filter_work);
+
+ rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw,
+ rt2x00dev->interface.filter,
+ &rt2x00dev->interface.filter,
+ 0, NULL);
+}
+
/*
* Interrupt context handlers.
*/
@@ -341,7 +354,7 @@ void rt2x00lib_txdone(struct data_entry *entry,
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
- const int signal, const int rssi, const int ofdm)
+ struct rxdata_entry_desc *desc)
{
struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev;
struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
@@ -362,22 +375,24 @@ void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
* the signal is the PLCP value. If it was received with
* a CCK bitrate the signal is the rate in 0.5kbit/s.
*/
- if (!ofdm)
+ if (!desc->ofdm)
val = DEVICE_GET_RATE_FIELD(rate->val, RATE);
else
val = DEVICE_GET_RATE_FIELD(rate->val, PLCP);
- if (val == signal) {
+ if (val == desc->signal) {
val = rate->val;
break;
}
}
- rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
+ rt2x00_update_link_rssi(&rt2x00dev->link, desc->rssi);
rt2x00dev->link.rx_success++;
rx_status->rate = val;
- rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev, rssi);
- rx_status->ssi = rssi;
+ rx_status->signal =
+ rt2x00lib_calculate_link_signal(rt2x00dev, desc->rssi);
+ rx_status->ssi = desc->rssi;
+ rx_status->flag = desc->flags;
/*
* Send frame to mac80211
@@ -395,7 +410,7 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
unsigned int length,
struct ieee80211_tx_control *control)
{
- struct data_entry_desc desc;
+ struct txdata_entry_desc desc;
struct data_ring *ring;
int tx_rate;
int bitrate;
@@ -960,6 +975,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
* Initialize configuration work.
*/
INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled);
+ INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
/*
@@ -1102,7 +1118,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
rt2x00lib_config_type(rt2x00dev, intf->type);
- rt2x00lib_config_packet_filter(rt2x00dev, intf->filter);
/*
* When in Master or Ad-hoc mode,
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 3324090..fcc2ffd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -51,7 +51,6 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev);
*/
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac);
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid);
-void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter);
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type);
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 778ed41..17802f6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -176,46 +176,26 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
- int retval;
/*
* We only support 1 non-monitor interface.
*/
- if (conf->type != IEEE80211_IF_TYPE_MNTR && is_interface_present(intf))
+ if (is_interface_present(intf))
return -ENOBUFS;
- /*
- * HACK: Placeholder until start/stop handler has been
- * added to the mac80211 callback functions structure.
- */
- retval = rt2x00mac_start(hw);
- if (retval)
- return retval;
-
- /*
- * We support muliple monitor mode interfaces.
- * All we need to do is increase the monitor_count.
- */
- if (conf->type == IEEE80211_IF_TYPE_MNTR) {
- intf->monitor_count++;
- } else {
- intf->id = conf->if_id;
- intf->type = conf->type;
- if (conf->type == IEEE80211_IF_TYPE_AP)
- memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
- memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
- intf->filter = 0;
- }
+ intf->id = conf->if_id;
+ intf->type = conf->type;
+ if (conf->type == IEEE80211_IF_TYPE_AP)
+ memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
+ memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
/*
- * Configure interface.
* The MAC adddress must be configured after the device
- * has been initialized. Else the device can reset the
- * MAC registers.
+ * has been initialized. Otherwise the device can reset
+ * the MAC registers.
*/
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_type(rt2x00dev, conf->type);
- rt2x00lib_config_packet_filter(rt2x00dev, intf->filter);
return 0;
}
@@ -230,22 +210,13 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
/*
* We only support 1 non-monitor interface.
*/
- if (conf->type != IEEE80211_IF_TYPE_MNTR && !is_interface_present(intf))
+ if (!is_interface_present(intf))
return;
- /*
- * When removing an monitor interface, decrease monitor_count.
- * For non-monitor interfaces, all interface data needs to be reset.
- */
- if (conf->type == IEEE80211_IF_TYPE_MNTR) {
- intf->monitor_count--;
- } else if (intf->type == conf->type) {
- intf->id = 0;
- intf->type = INVALID_INTERFACE;
- memset(&intf->bssid, 0x00, ETH_ALEN);
- memset(&intf->mac, 0x00, ETH_ALEN);
- intf->filter = 0;
- }
+ intf->id = 0;
+ intf->type = INVALID_INTERFACE;
+ memset(&intf->bssid, 0x00, ETH_ALEN);
+ memset(&intf->mac, 0x00, ETH_ALEN);
/*
* Make sure the bssid and mac address registers
@@ -254,12 +225,6 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
rt2x00lib_config_type(rt2x00dev, intf->type);
-
- /*
- * HACK: Placeholder untill start/stop handler has been
- * added to the mac80211 callback functions structure.
- */
- rt2x00mac_stop(hw);
}
EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
@@ -290,14 +255,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
rt2x00lib_config(rt2x00dev, conf);
/*
- * If promisc mode cannot be configured in irq context,
- * then it is now the time to configure it.
- */
- if (test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags))
- rt2x00lib_config_packet_filter(rt2x00dev,
- rt2x00dev->interface.filter);
-
- /*
* Reenable RX only if the radio should be on.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
@@ -326,13 +283,10 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
return 0;
/*
- * Monitor mode does not need configuring.
* If the given type does not match the configured type,
* there has been a problem.
*/
- if (conf->type == IEEE80211_IF_TYPE_MNTR)
- return 0;
- else if (conf->type != intf->type)
+ if (conf->type != intf->type)
return -EINVAL;
/*
@@ -360,36 +314,6 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
}
EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
-void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw,
- unsigned short flags, int mc_count)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- /*
- * Check if the new state is different then the old state.
- */
- if (rt2x00dev->interface.filter == flags)
- return;
-
- rt2x00dev->interface.filter = flags;
-
- /*
- * Raise the pending bit to indicate the
- * packet filter should be updated.
- */
- __set_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags);
-
- /*
- * Check if Packet filter actions are allowed in
- * atomic context. If not, raise the pending flag and
- * let it be.
- */
- if (!test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags) ||
- !in_atomic())
- rt2x00lib_config_packet_filter(rt2x00dev, flags);
-}
-EXPORT_SYMBOL_GPL(rt2x00mac_set_multicast_list);
-
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 85629f1..2780df0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -124,47 +124,40 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
struct data_entry *entry;
struct data_desc *rxd;
struct sk_buff *skb;
- u32 desc;
- int retval;
- int signal;
- int rssi;
- int ofdm;
- int size;
+ struct rxdata_entry_desc desc;
+ u32 word;
while (1) {
entry = rt2x00_get_data_entry(ring);
rxd = entry->priv;
- rt2x00_desc_read(rxd, 0, &desc);
+ rt2x00_desc_read(rxd, 0, &word);
- if (rt2x00_get_field32(desc, RXD_ENTRY_OWNER_NIC))
+ if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC))
break;
- retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal,
- &rssi, &ofdm, &size);
- if (retval)
- goto skip_entry;
+ memset(&desc, 0x00, sizeof(desc));
+ rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
/*
* Allocate the sk_buffer, initialize it and copy
* all data into it.
*/
- skb = dev_alloc_skb(size + NET_IP_ALIGN);
+ skb = dev_alloc_skb(desc.size + NET_IP_ALIGN);
if (!skb)
return;
skb_reserve(skb, NET_IP_ALIGN);
- skb_put(skb, size);
- memcpy(skb->data, entry->data_addr, size);
+ skb_put(skb, desc.size);
+ memcpy(skb->data, entry->data_addr, desc.size);
/*
* Send the frame to rt2x00lib for further processing.
*/
- rt2x00lib_rxdone(entry, skb, signal, rssi, ofdm);
+ rt2x00lib_rxdone(entry, skb, &desc);
-skip_entry:
if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
- rt2x00_set_field32(&desc, RXD_ENTRY_OWNER_NIC, 1);
- rt2x00_desc_write(rxd, 0, desc);
+ rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1);
+ rt2x00_desc_write(rxd, 0, word);
}
rt2x00_ring_index_inc(ring);
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index dc5b696..b54457c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -45,11 +45,9 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
return 0;
/*
- * Only continue if we have an active interface,
- * either monitor or non-monitor should be present.
+ * Only continue if we have an active interface.
*/
- if (!is_interface_present(&rt2x00dev->interface) &&
- !is_monitor_present(&rt2x00dev->interface))
+ if (!is_interface_present(&rt2x00dev->interface))
return 0;
if (state == RFKILL_STATE_ON) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00ring.h b/drivers/net/wireless/rt2x00/rt2x00ring.h
index 122c752..1a864d3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ring.h
+++ b/drivers/net/wireless/rt2x00/rt2x00ring.h
@@ -41,11 +41,24 @@ struct data_desc {
};
/*
- * data_entry_desc
+ * rxdata_entry_desc
+ * Summary of information that has been read from the
+ * RX frame descriptor.
+ */
+struct rxdata_entry_desc {
+ int signal;
+ int rssi;
+ int ofdm;
+ int size;
+ int flags;
+};
+
+/*
+ * txdata_entry_desc
* Summary of information that should be written into the
* descriptor for sending a TX frame.
*/
-struct data_entry_desc {
+struct txdata_entry_desc {
unsigned long flags;
#define ENTRY_TXDONE 1
#define ENTRY_TXD_RTS_FRAME 2
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 248144f..66e4761 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -218,11 +218,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
struct data_ring *ring = entry->ring;
struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
struct sk_buff *skb;
- int retval;
- int signal;
- int rssi;
- int ofdm;
- int size;
+ struct rxdata_entry_desc desc;
int frame_size;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
@@ -237,10 +233,8 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
if (urb->actual_length < entry->ring->desc_size || urb->status)
goto skip_entry;
- retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal, &rssi,
- &ofdm, &size);
- if (retval)
- goto skip_entry;
+ memset(&desc, 0x00, sizeof(desc));
+ rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
/*
* Allocate a new sk buffer to replace the current one.
@@ -259,12 +253,12 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
* Trim the skb_buffer to only contain the valid
* frame data (so ignore the device's descriptor).
*/
- skb_trim(entry->skb, size);
+ skb_trim(entry->skb, desc.size);
/*
* Send the frame to rt2x00lib for further processing.
*/
- rt2x00lib_rxdone(entry, entry->skb, signal, rssi, ofdm);
+ rt2x00lib_rxdone(entry, entry->skb, &desc);
/*
* Replace current entry's skb with the newly allocated one,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 69ed178..3edcd74 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -312,23 +312,9 @@ static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, ®, sizeof(reg));
}
-static void rt61pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter)
-{
- int promisc = !!(filter & IFF_PROMISC);
- int multicast = !!(filter & IFF_MULTICAST);
- int broadcast = !!(filter & IFF_BROADCAST);
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, !promisc);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, !multicast);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, !broadcast);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
{
+ struct interface *intf = &rt2x00dev->interface;
u32 reg;
/*
@@ -344,56 +330,19 @@ static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
/*
- * Apply hardware packet filter.
- */
- rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
-
- if (!is_monitor_present(&rt2x00dev->interface) &&
- (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
- rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 1);
- else
- rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 0);
-
- /*
- * If there is a non-monitor interface present
- * the packet should be strict (even if a monitor interface is present!).
- * When there is only 1 interface present which is in monitor mode
- * we should start accepting _all_ frames.
- */
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
- } else if (is_monitor_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 0);
- }
-
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-
- /*
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
- }
-
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
- if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) ||
+ is_interface_type(intf, IEEE80211_IF_TYPE_AP))
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 2);
- else if (type == IEEE80211_IF_TYPE_STA)
+ else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 1);
- else if (is_monitor_present(&rt2x00dev->interface) &&
- !is_interface_present(&rt2x00dev->interface))
+ else
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
-
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
@@ -1686,7 +1635,7 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
@@ -1826,8 +1775,8 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}
-static int rt61pci_fill_rxdone(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size)
+static void rt61pci_fill_rxdone(struct data_entry *entry,
+ struct rxdata_entry_desc *desc)
{
struct data_desc *rxd = entry->priv;
u32 word0;
@@ -1836,19 +1785,19 @@ static int rt61pci_fill_rxdone(struct data_entry *entry,
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
- if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
- return -EINVAL;
+ desc->flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ desc->flags |= RX_FLAG_FAILED_FCS_CRC;
/*
* Obtain the status about this packet.
*/
- *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- *rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
- *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+ desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
+ desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- return 0;
+ return;
}
/*
@@ -2340,9 +2289,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_MONITOR_DURING_OPER |
- IEEE80211_HW_NO_PROBE_FILTERING;
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = 0;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
@@ -2426,6 +2373,74 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
+static void rt61pci_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct interface *intf = &rt2x00dev->interface;
+ u32 reg;
+
+ /*
+ * Mask off any flags we are going to ignore from
+ * the total_flags field.
+ */
+ *total_flags &=
+ FIF_ALLMULTI |
+ FIF_FCSFAIL |
+ FIF_PLCPFAIL |
+ FIF_CONTROL |
+ FIF_OTHER_BSS |
+ FIF_PROMISC_IN_BSS;
+
+ /*
+ * Apply some rules to the filters:
+ * - Some filters imply different filters to be set.
+ * - Some things we can't filter out at all.
+ * - Some filters are set based on interface type.
+ */
+ if (mc_count)
+ *total_flags |= FIF_ALLMULTI;
+ if (changed_flags & FIF_OTHER_BSS ||
+ changed_flags & FIF_PROMISC_IN_BSS)
+ *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
+ *total_flags |= FIF_PROMISC_IN_BSS;
+
+ /*
+ * Check if there is any work left for us.
+ */
+ if (intf->filter == *total_flags)
+ return;
+ intf->filter = *total_flags;
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
+ !(*total_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
+ !(*total_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
+ !(*total_flags & FIF_CONTROL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
+ !(*total_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
+ rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
+}
+
static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
@@ -2506,11 +2521,13 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
static const struct ieee80211_ops rt61pci_mac80211_ops = {
.tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .set_multicast_list = rt2x00mac_set_multicast_list,
+ .configure_filter = rt61pci_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.conf_tx = rt2x00mac_conf_tx,
@@ -2540,7 +2557,6 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.fill_rxdone = rt61pci_fill_rxdone,
.config_mac_addr = rt61pci_config_mac_addr,
.config_bssid = rt61pci_config_bssid,
- .config_packet_filter = rt61pci_config_packet_filter,
.config_type = rt61pci_config_type,
.config = rt61pci_config,
};
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 890b449..b18cc93 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -293,23 +293,9 @@ static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, ®, sizeof(reg));
}
-static void rt73usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter)
-{
- int promisc = !!(filter & IFF_PROMISC);
- int multicast = !!(filter & IFF_MULTICAST);
- int broadcast = !!(filter & IFF_BROADCAST);
- u32 reg;
-
- rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, !promisc);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, !multicast);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, !broadcast);
- rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
{
+ struct interface *intf = &rt2x00dev->interface;
u32 reg;
/*
@@ -325,56 +311,19 @@ static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
/*
- * Apply hardware packet filter.
- */
- rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®);
-
- if (!is_monitor_present(&rt2x00dev->interface) &&
- (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
- rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 1);
- else
- rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, 0);
-
- /*
- * If there is a non-monitor interface present
- * the packet should be strict (even if a monitor interface is present!).
- * When there is only 1 interface present which is in monitor mode
- * we should start accepting _all_ frames.
- */
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
- } else if (is_monitor_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 0);
- }
-
- rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-
- /*
* Enable synchronisation.
*/
rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®);
- if (is_interface_present(&rt2x00dev->interface)) {
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
- }
-
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
- if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_IBSS) ||
+ is_interface_type(intf, IEEE80211_IF_TYPE_AP))
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 2);
- else if (type == IEEE80211_IF_TYPE_STA)
+ else if (is_interface_type(intf, IEEE80211_IF_TYPE_STA))
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 1);
- else if (is_monitor_present(&rt2x00dev->interface) &&
- !is_interface_present(&rt2x00dev->interface))
+ else
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
-
rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
}
@@ -1301,7 +1250,7 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct data_desc *txd,
- struct data_entry_desc *desc,
+ struct txdata_entry_desc *desc,
struct ieee80211_hdr *ieee80211hdr,
unsigned int length,
struct ieee80211_tx_control *control)
@@ -1429,8 +1378,8 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}
-static int rt73usb_fill_rxdone(struct data_entry *entry,
- int *signal, int *rssi, int *ofdm, int *size)
+static void rt73usb_fill_rxdone(struct data_entry *entry,
+ struct rxdata_entry_desc *desc)
{
struct data_desc *rxd = (struct data_desc *)entry->skb->data;
u32 word0;
@@ -1439,24 +1388,24 @@ static int rt73usb_fill_rxdone(struct data_entry *entry,
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
- if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
- rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
- return -EINVAL;
+ desc->flags = 0;
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ desc->flags |= RX_FLAG_FAILED_FCS_CRC;
/*
* Obtain the status about this packet.
*/
- *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- *rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1);
- *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
- *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+ desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ desc->rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1);
+ desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
/*
* Pull the skb to clear the descriptor area.
*/
skb_pull(entry->skb, entry->ring->desc_size);
- return 0;
+ return;
}
/*
@@ -1802,9 +1751,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_MONITOR_DURING_OPER |
- IEEE80211_HW_NO_PROBE_FILTERING;
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
rt2x00dev->hw->max_signal = MAX_SIGNAL;
rt2x00dev->hw->max_rssi = MAX_RX_SSI;
@@ -1878,11 +1825,9 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
rt73usb_probe_hw_mode(rt2x00dev);
/*
- * USB devices require scheduled packet filter toggling
* This device requires firmware
*/
__set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -1895,6 +1840,83 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* IEEE80211 stack callback functions.
*/
+static void rt73usb_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct interface *intf = &rt2x00dev->interface;
+ u32 reg;
+
+ /*
+ * Mask off any flags we are going to ignore from
+ * the total_flags field.
+ */
+ *total_flags &=
+ FIF_ALLMULTI |
+ FIF_FCSFAIL |
+ FIF_PLCPFAIL |
+ FIF_CONTROL |
+ FIF_OTHER_BSS |
+ FIF_PROMISC_IN_BSS;
+
+ /*
+ * Apply some rules to the filters:
+ * - Some filters imply different filters to be set.
+ * - Some things we can't filter out at all.
+ * - Some filters are set based on interface type.
+ */
+ if (mc_count)
+ *total_flags |= FIF_ALLMULTI;
+ if (changed_flags & FIF_OTHER_BSS ||
+ changed_flags & FIF_PROMISC_IN_BSS)
+ *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
+ if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
+ *total_flags |= FIF_PROMISC_IN_BSS;
+
+ /*
+ * Check if there is any work left for us.
+ */
+ if (intf->filter == *total_flags)
+ return;
+ intf->filter = *total_flags;
+
+ /*
+ * When in atomic context, reschedule and let rt2x00lib
+ * call this function again.
+ */
+ if (in_atomic()) {
+ queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
+ return;
+ }
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
+ !(*total_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
+ !(*total_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
+ !(*total_flags & FIF_CONTROL));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
+ !(*total_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
+ !(*total_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
+ rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+}
+
static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retry)
{
@@ -1977,11 +1999,13 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
static const struct ieee80211_ops rt73usb_mac80211_ops = {
.tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
- .set_multicast_list = rt2x00mac_set_multicast_list,
+ .configure_filter = rt73usb_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.conf_tx = rt2x00mac_conf_tx,
@@ -2012,7 +2036,6 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.fill_rxdone = rt73usb_fill_rxdone,
.config_mac_addr = rt73usb_config_mac_addr,
.config_bssid = rt73usb_config_bssid,
- .config_packet_filter = rt73usb_config_packet_filter,
.config_type = rt73usb_config_type,
.config = rt73usb_config,
};
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 5d63a1a..f095151 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -290,7 +290,7 @@ struct hw_pairwise_ta_entry {
#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
-#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000)
+#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 6/12] rt2x00: Reorganize rt2x00dev->flags
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (4 preceding siblings ...)
2007-09-25 18:55 ` [PATCH 5/12] rt2x00: adapt to filter configuration API Ivo van Doorn
@ 2007-09-25 18:55 ` Ivo van Doorn
2007-09-25 18:56 ` [PATCH 7/12] rt2x00: Add rt2x00dev->flags to debugfs Ivo van Doorn
` (5 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:55 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
The rt2x00dev->flags has become a chaos over time,
this will reorganize the flags by renaming, deleting, adding
and properly implement the flags.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00.h | 31 +++++++---------
drivers/net/wireless/rt2x00/rt2x00config.c | 27 ++++----------
drivers/net/wireless/rt2x00/rt2x00dev.c | 55 ++++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt2x00lib.h | 3 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 55 +++++++++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 12 +++---
drivers/net/wireless/rt2x00/rt61pci.c | 4 +-
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
11 files changed, 115 insertions(+), 84 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 03a94a3..faa4711 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1374,7 +1374,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Check if the BBP tuning should be enabled.
@@ -1469,7 +1469,7 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 892baa9..929257d 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1545,7 +1545,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Check if the BBP tuning should be enabled.
@@ -1801,7 +1801,7 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index f4e6f6e..7aacc7b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1573,7 +1573,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 5f05c7e..ea20f3a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -493,24 +493,21 @@ struct rt2x00_dev {
* of the device capabilities are stored.
*/
unsigned long flags;
-#define DEVICE_ENABLED_RADIO 1
-#define DEVICE_ENABLED_RADIO_HW 2
+#define DEVICE_PRESENT 1
+#define DEVICE_REGISTERED_HW 2
#define DEVICE_INITIALIZED 3
-#define DEVICE_INITIALIZED_HW 4
-#define REQUIRE_FIRMWARE 5
-/* Hole: Add new Flag here */
-#define INTERFACE_RESUME 8
-#define INTERFACE_ENABLED 9
-/* Hole: Add new Flag here */
-#define REQUIRE_BEACON_RING 11
-#define DEVICE_SUPPORT_HW_BUTTON 12
-#define CONFIG_FRAME_TYPE 13
-#define CONFIG_RF_SEQUENCE 14
-/* Hole: Add new Flag here */
-#define CONFIG_EXTERNAL_LNA_A 16
-#define CONFIG_EXTERNAL_LNA_BG 17
-#define CONFIG_DOUBLE_ANTENNA 18
-#define CONFIG_DISABLE_LINK_TUNING 19
+#define DEVICE_STARTED 4
+#define DEVICE_ENABLED_RADIO 5
+#define DEVICE_ENABLED_RADIO_HW 6
+#define DRIVER_REQUIRE_FIRMWARE 7
+#define DRIVER_REQUIRE_BEACON_RING 8
+#define CONFIG_SUPPORT_HW_BUTTON 9
+#define CONFIG_FRAME_TYPE 10
+#define CONFIG_RF_SEQUENCE 11
+#define CONFIG_EXTERNAL_LNA_A 12
+#define CONFIG_EXTERNAL_LNA_BG 13
+#define CONFIG_DOUBLE_ANTENNA 14
+#define CONFIG_DISABLE_LINK_TUNING 15
/*
* Chipset identification.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f962ce4..13b5106 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -48,33 +48,20 @@ void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type)
{
- struct interface *intf = &rt2x00dev->interface;
-
- if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
- (!!test_bit(INTERFACE_ENABLED, &rt2x00dev->flags) ==
- !!is_interface_present(intf)))
- return;
-
- rt2x00dev->ops->lib->config_type(rt2x00dev, type);
-
- /*
- * Update the configuration flags.
- */
- if (is_interface_present(intf))
- __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
- else
- __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
+ if (type != INVALID_INTERFACE)
+ rt2x00dev->ops->lib->config_type(rt2x00dev, type);
}
-void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf)
+void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf, const int force_config)
{
int flags = 0;
/*
- * If we are in RESUME state we should
- * force all configuration options.
+ * In some situations we want to force all configurations
+ * to be reloaded (When resuming for instance).
*/
- if (test_bit(INTERFACE_RESUME, &rt2x00dev->flags)) {
+ if (force_config) {
flags = CONFIG_UPDATE_ALL;
goto config;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 4f66adc..f8f7e6e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -40,7 +40,7 @@
struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev,
const unsigned int queue)
{
- int beacon = test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Check if we are requesting a reqular TX ring,
@@ -102,7 +102,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
* And check if the hardware button has been disabled.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
- (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
+ (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
!test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags)))
return 0;
@@ -162,6 +162,9 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
{
enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF;
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
/*
* When we are disabling the RX, we should also stop the link tuner.
*/
@@ -721,7 +724,7 @@ exit:
static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
{
- if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags))
+ if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
ieee80211_unregister_hw(rt2x00dev->hw);
if (likely(rt2x00dev->hwmodes)) {
@@ -753,7 +756,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
return status;
}
- __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags);
+ __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
return 0;
}
@@ -810,7 +813,7 @@ static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev)
return -ENOMEM;
}
- if (!test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
+ if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags))
return 0;
/*
@@ -919,7 +922,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
* Atim: 1 (if required)
*/
rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues +
- (2 * test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags));
+ (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags));
ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL);
if (!ring) {
@@ -932,7 +935,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->rx = ring;
rt2x00dev->tx = &rt2x00dev->rx[1];
- if (test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
+ if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags))
rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues];
/*
@@ -1011,6 +1014,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
*/
rt2x00debug_register(rt2x00dev);
+ __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
return 0;
exit:
@@ -1022,6 +1027,8 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
{
+ __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
/*
* Disable radio.
*/
@@ -1068,6 +1075,13 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
int retval;
NOTICE(rt2x00dev, "Going to sleep.\n");
+ __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
+ /*
+ * Only continue if mac80211 has open interfaces.
+ */
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ goto exit;
/*
* Disable radio and unitialize all items
@@ -1077,6 +1091,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
+exit:
/*
* Set device mode to sleep for power management.
*/
@@ -1094,7 +1109,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
int retval;
NOTICE(rt2x00dev, "Waking up.\n");
- __set_bit(INTERFACE_RESUME, &rt2x00dev->flags);
+ __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
/*
* Open the debugfs entry.
@@ -1102,6 +1117,12 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
rt2x00debug_register(rt2x00dev);
/*
+ * Only continue if mac80211 has open interfaces.
+ */
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ return 0;
+
+ /*
* Reinitialize device and all active interfaces.
*/
retval = rt2x00mac_start(rt2x00dev->hw);
@@ -1111,15 +1132,23 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reconfigure device.
*/
- retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
- if (retval)
- goto exit;
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
+ if (!rt2x00dev->hw->conf.radio_enabled)
+ rt2x00lib_disable_radio(rt2x00dev);
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
rt2x00lib_config_type(rt2x00dev, intf->type);
/*
+ * It is possible that during that mac80211 has attempted
+ * to send frames while we were suspending or resuming.
+ * In that case we have disabled the TX queue and should
+ * now enable it again
+ */
+ ieee80211_start_queues(rt2x00dev->hw);
+
+ /*
* When in Master or Ad-hoc mode,
* restart Beacon transmitting by faking a beacondone event.
*/
@@ -1127,8 +1156,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
intf->type == IEEE80211_IF_TYPE_IBSS)
rt2x00lib_beacondone(rt2x00dev);
- __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
-
return 0;
exit:
@@ -1136,8 +1163,6 @@ exit:
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
- __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
-
return retval;
}
EXPORT_SYMBOL_GPL(rt2x00lib_resume);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index fcc2ffd..6dd92eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -52,7 +52,8 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac);
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid);
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type);
-void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf);
+void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf, const int force_config);
/*
* Firmware handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 17802f6..e98d013 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -82,6 +82,17 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
u16 frame_control;
/*
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
+ * Note that we can only stop the TX queues inside the TX path
+ * due to possible race conditions in mac80211.
+ */
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
+ ieee80211_stop_queues(hw);
+ return 0;
+ }
+
+ /*
* Determine which ring to put packet on.
*/
ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
@@ -126,14 +137,15 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
struct rt2x00_dev *rt2x00dev = hw->priv;
int status;
- if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ test_bit(DEVICE_STARTED, &rt2x00dev->flags))
return 0;
/*
* If this is the first interface which is added,
* we should load the firmware now.
*/
- if (test_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
+ if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
status = rt2x00lib_load_firmware(rt2x00dev);
if (status)
return status;
@@ -155,6 +167,8 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
return status;
}
+ __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_start);
@@ -163,11 +177,16 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ return;
+
/*
* Perhaps we can add something smarter here,
* but for now just disabling the radio should do.
*/
rt2x00lib_disable_radio(rt2x00dev);
+
+ __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
}
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
@@ -178,9 +197,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct interface *intf = &rt2x00dev->interface;
/*
- * We only support 1 non-monitor interface.
+ * Don't allow interfaces to be added while
+ * either the device has disappeared or when
+ * another interface is already present.
*/
- if (is_interface_present(intf))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ is_interface_present(intf))
return -ENOBUFS;
intf->id = conf->if_id;
@@ -208,9 +230,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct interface *intf = &rt2x00dev->interface;
/*
- * We only support 1 non-monitor interface.
+ * Don't allow interfaces to be remove while
+ * either the device has disappeared or when
+ * no interface is present.
*/
- if (!is_interface_present(intf))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ !is_interface_present(intf))
return;
intf->id = 0;
@@ -233,12 +258,10 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
struct rt2x00_dev *rt2x00dev = hw->priv;
/*
- * If the device is not initialized we shouldn't accept
- * any configuration changes. Mac80211 might be calling
- * this function while we are trying to remove the device
- * or perhaps suspending it.
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
@@ -252,7 +275,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
rt2x00lib_toggle_rx(rt2x00dev, 0);
}
- rt2x00lib_config(rt2x00dev, conf);
+ rt2x00lib_config(rt2x00dev, conf, 0);
/*
* Reenable RX only if the radio should be on.
@@ -274,12 +297,10 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
int status;
/*
- * If the device is not initialized we shouldn't accept
- * any configuration changes. Mac80211 might be calling
- * this function while we are trying to remove the device
- * or perhaps suspending it.
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index b54457c..06af014 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -45,9 +45,9 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
return 0;
/*
- * Only continue if we have an active interface.
+ * Only continue if there are enabled interfaces.
*/
- if (!is_interface_present(&rt2x00dev->interface))
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
return 0;
if (state == RFKILL_STATE_ON) {
@@ -76,7 +76,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
int retval;
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
retval = rfkill_register(rt2x00dev->rfkill);
@@ -97,7 +97,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_unregister_polled_device(rt2x00dev->poll_dev);
@@ -108,7 +108,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
{
struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
@@ -138,7 +138,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_free_polled_device(rt2x00dev->poll_dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3edcd74..4c5e317 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2105,7 +2105,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Read frequency offset and RF programming sequence.
@@ -2360,7 +2360,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires firmware
*/
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b18cc93..ffed3ec 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1827,7 +1827,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires firmware
*/
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
/*
* Set the rssi offset.
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 7/12] rt2x00: Add rt2x00dev->flags to debugfs
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (5 preceding siblings ...)
2007-09-25 18:55 ` [PATCH 6/12] rt2x00: Reorganize rt2x00dev->flags Ivo van Doorn
@ 2007-09-25 18:56 ` Ivo van Doorn
2007-09-25 18:56 ` [PATCH 8/12] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work Ivo van Doorn
` (4 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:56 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
>From aff2d533a74a6346d704321ff87b8874353ed5fa Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Tue, 25 Sep 2007 20:13:51 +0200
Subject: [PATCH] rt2x00: Add rt2x00dev->flags to debugfs
Loosely based on the patch by Matthijs Kooijman,
this will add the dev_flags entry into debugfs which
will display rt2x00dev->flags.
This will allow easier debugging of flag handling.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00debug.c | 37 +++++++++++++++++++++++++++++
1 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 4d2aaec..9275d6f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -57,6 +57,7 @@ struct rt2x00debug_intf {
* - driver folder
* - driver file
* - chipset file
+ * - device flags file
* - register offset/value files
* - eeprom offset/value files
* - bbp offset/value files
@@ -65,6 +66,7 @@ struct rt2x00debug_intf {
struct dentry *driver_folder;
struct dentry *driver_entry;
struct dentry *chipset_entry;
+ struct dentry *dev_flags;
struct dentry *csr_off_entry;
struct dentry *csr_val_entry;
struct dentry *eeprom_off_entry;
@@ -193,6 +195,34 @@ RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16);
RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8);
RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32);
+static ssize_t rt2x00debug_read_dev_flags(struct file *file,
+ char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ char line[16];
+ size_t size;
+
+ if (*offset)
+ return 0;
+
+ size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->flags);
+
+ if (copy_to_user(buf, line, size))
+ return -EFAULT;
+
+ *offset += size;
+ return size;
+}
+
+static const struct file_operations rt2x00debug_fop_dev_flags = {
+ .owner = THIS_MODULE,
+ .read = rt2x00debug_read_dev_flags,
+ .open = rt2x00debug_file_open,
+ .release = rt2x00debug_file_release,
+};
+
static struct dentry *rt2x00debug_create_file_driver(const char *name,
struct rt2x00debug_intf
*intf,
@@ -270,6 +300,12 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
if (IS_ERR(intf->chipset_entry))
goto exit;
+ intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO,
+ intf->driver_folder, intf,
+ &rt2x00debug_fop_dev_flags);
+ if (IS_ERR(intf->dev_flags))
+ goto exit;
+
#define RT2X00DEBUGFS_CREATE_ENTRY(__intf, __name) \
({ \
(__intf)->__name##_off_entry = \
@@ -320,6 +356,7 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
debugfs_remove(intf->eeprom_off_entry);
debugfs_remove(intf->csr_val_entry);
debugfs_remove(intf->csr_off_entry);
+ debugfs_remove(intf->dev_flags);
debugfs_remove(intf->chipset_entry);
debugfs_remove(intf->driver_entry);
debugfs_remove(intf->driver_folder);
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 8/12] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (6 preceding siblings ...)
2007-09-25 18:56 ` [PATCH 7/12] rt2x00: Add rt2x00dev->flags to debugfs Ivo van Doorn
@ 2007-09-25 18:56 ` Ivo van Doorn
2007-09-25 18:57 ` [PATCH 9/12] rt2x00: Stop link tuning when radio is down Ivo van Doorn
` (3 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:56 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Calling cancel_delayed_work_sync() unconditionally won't hurt
and it will avoid race conditions when another CPU is already
executing link_tuner work.
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index f8f7e6e..e8c91fb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -80,8 +80,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
{
- if (delayed_work_pending(&rt2x00dev->link.work))
- cancel_rearming_delayed_work(&rt2x00dev->link.work);
+ cancel_delayed_work_sync(&rt2x00dev->link.work);
}
void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 9/12] rt2x00: Stop link tuning when radio is down
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (7 preceding siblings ...)
2007-09-25 18:56 ` [PATCH 8/12] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work Ivo van Doorn
@ 2007-09-25 18:57 ` Ivo van Doorn
2007-09-25 18:57 ` [PATCH 10/12] rt2x00: Fix obvious typo in comment Ivo van Doorn
` (2 subsequent siblings)
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:57 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
As pointed out by Modestas Vainius the link tuner
could continue working while the radio is already
down. This because at the start of disable_radio
the ENABLED_RADIO flag is cleared and causes the
toggle_rx to skip the stop_link_tuner() call.
This will add a check to the start of the link tuner
which will automatically stop the link tuner when the
radio is disabled.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e8c91fb..92b7252 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -237,6 +237,13 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
container_of(work, struct rt2x00_dev, link.work.work);
/*
+ * When the radio is shutting down we should
+ * immediately cease all link tuning.
+ */
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /*
* Update statistics.
*/
rt2x00dev->ops->lib->link_stats(rt2x00dev);
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 10/12] rt2x00: Fix obvious typo in comment
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (8 preceding siblings ...)
2007-09-25 18:57 ` [PATCH 9/12] rt2x00: Stop link tuning when radio is down Ivo van Doorn
@ 2007-09-25 18:57 ` Ivo van Doorn
2007-09-25 18:57 ` [PATCH 11/12] rt2x00: Fix panic on rmmod with rfkill enabled Ivo van Doorn
2007-09-25 18:58 ` [PATCH 12/12] rt2x00: Release rt2x00 2.0.9 Ivo van Doorn
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:57 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 929257d..842da90 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -244,7 +244,7 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
return rt2x00_get_field32(reg, GPIOCSR_BIT0);
}
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT2500PCI_RFKILL */
/*
* Configuration handlers.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 4c5e317..6aa5176 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -269,7 +269,7 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
}
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT61PCI_RFKILL */
/*
* Configuration handlers.
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 11/12] rt2x00: Fix panic on rmmod with rfkill enabled
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (9 preceding siblings ...)
2007-09-25 18:57 ` [PATCH 10/12] rt2x00: Fix obvious typo in comment Ivo van Doorn
@ 2007-09-25 18:57 ` Ivo van Doorn
2007-09-25 18:58 ` [PATCH 12/12] rt2x00: Release rt2x00 2.0.9 Ivo van Doorn
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:57 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
When ieee80211_hw.config indicates that the radio
is enabled and is configuring options that require
the link tuner to be restarted the link tuner will
cause a kernel panic when rfkill has indicated the
radio was in fact disabled.
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 92b7252..0216096 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -85,6 +85,9 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
{
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
rt2x00lib_stop_link_tuner(rt2x00dev);
rt2x00lib_start_link_tuner(rt2x00dev);
}
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 12/12] rt2x00: Release rt2x00 2.0.9
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (10 preceding siblings ...)
2007-09-25 18:57 ` [PATCH 11/12] rt2x00: Fix panic on rmmod with rfkill enabled Ivo van Doorn
@ 2007-09-25 18:58 ` Ivo van Doorn
11 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:58 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Version bump
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ea20f3a..511c11c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -42,7 +42,7 @@
* Module information.
* DRV_NAME should be set within the individual module source files.
*/
-#define DRV_VERSION "2.0.8"
+#define DRV_VERSION "2.0.9"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
--
1.5.3.2
^ permalink raw reply related [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-10-06 12:19 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-10-06 12:19 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the rt2x00 2.0.10 update.
Some obvious bugs have been fixed, some not so obvious bugs,
and the code has been cleaned up a bit by moving more
into rt2x00lib.
Note that as of now rt2x00.git will be branched from the wireless-2.6
git tree. I see wireless-dev has already been removed/renamed so
I won't be using that anymore. ;)
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.10/
Ivo
---
The following changes since commit f88cf9b6d7c8dad6eb64a972a753584b8006c545:
John W. Linville (1):
zd1211rw-mac80211: undo print_mac API stuff
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (16):
rt2x00: Remove duplicate code in MAC & BSSID handling
rt2x00: Remove radio check from rt2x00lib_toggle_rx
rt2x00: Store "STARTED" state during suspend
rt2x00: Move rt2x00dev flags into enumeration
rt2x00: Don't use changed_flags inside configure_packet_filter
rt2x00: Fix rfkill handling
rt2x00: Move TSF sync values into rt2x00config
rt2x00: get_duration expects values in 100kbs
rt2x00: Cut lines down to 80 characters
rt2x00: Add get_tx_data_len callback function
rt2x00: Pass dev_state to rt2x00lib_toggle_rx
rt2x00: Small optimizations
rt2x00: Reorganize configuration handler
rt2x00: Clean disabling of rt73usb_get_tsf
rt2x00: Allways memset memory obtained from skb_push()
rt2x00: Release 2.0.10
drivers/net/wireless/rt2x00/rt2400pci.c | 186 ++++++++++----------------
drivers/net/wireless/rt2x00/rt2500pci.c | 201 +++++++++++-----------------
drivers/net/wireless/rt2x00/rt2500usb.c | 200 ++++++++++++----------------
drivers/net/wireless/rt2x00/rt2x00.h | 93 ++++++++++---
drivers/net/wireless/rt2x00/rt2x00config.c | 113 +++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00dev.c | 52 +++++---
drivers/net/wireless/rt2x00/rt2x00lib.h | 14 +--
drivers/net/wireless/rt2x00/rt2x00mac.c | 38 +++++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 9 ++
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 29 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 166 +++++++----------------
drivers/net/wireless/rt2x00/rt73usb.c | 195 +++++++++++----------------
13 files changed, 642 insertions(+), 658 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-10-13 14:27 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-10-13 14:27 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the rt2x00 2.0.11 update.
Highlights for this release are the fix for the TX problems,
and the implementation of the Software Diversity Antenna.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.11/
Ivo
---
The following changes since commit 2d46d1e00056de79e54c622a60f7e6f8818f6cb4:
Mattias Nissler (1):
mac80211: Defer setting of RX_FLAG_DECRYPTED.
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Move quality statistics into seperate structure
rt2x00: Use enum defines
rt2x00: Correctly translate mac80211 antenna setup to rt2x00
rt2x00: SW diversity should default to antenna B
rt2x00: Remove rt2x00_clear_link
rt2x00: Implement SW diversity
rt2x00: Cleanup if-statements
rt2x00: Add new rt73usb USB ID
rt2x00: Release rt2x00 2.0.11
Mattias Nissler (2):
rt2x00: Fix residual check in PLCP calculations.
rt2x00: Fix antenna selection.
drivers/net/wireless/rt2x00/rt2400pci.c | 80 +++++++-----
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 84 +++++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 13 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 165 +++++++++++++++++------
drivers/net/wireless/rt2x00/rt2x00config.c | 85 +++++++++++-
drivers/net/wireless/rt2x00/rt2x00dev.c | 201 ++++++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +
drivers/net/wireless/rt2x00/rt61pci.c | 116 +++++++++--------
drivers/net/wireless/rt2x00/rt73usb.c | 87 +++++++------
10 files changed, 645 insertions(+), 276 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-10-27 11:34 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-10-27 11:34 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the 2.0.12 release of rt2x00.
I noticed you only pulled 2 patches from the 2.0.11 release,
and I don't know why you dropped the remaining patches.
This means that this pull requests also contains the remaining
2.0.11 patches...
Lots of bugfixes this time, finally rfkill is working, link speeds issues
have been resolved and some packet loss issues are gone.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.12/
Ivo
---
The following changes since commit 0119130478b1706232d79c768cb587c5e0c615de:
John W. Linville (1):
Merge branch 'fixes-jgarzik' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (2):
rt2x00: Unconstify rt2x00dev
rt2x00: Place mutex around USB register access
Ivo van Doorn (15):
rt2x00: Move quality statistics into seperate structure
rt2x00: Use enum defines
rt2x00: Correctly translate mac80211 antenna setup to rt2x00
rt2x00: SW diversity should default to antenna B
rt2x00: Remove rt2x00_clear_link
rt2x00: Implement SW diversity
rt2x00: Cleanup if-statements
rt2x00: Release rt2x00 2.0.11
rt2x00: Disable RX when switching antenna
rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna
rt2x00: Input-polldev requires input device
rt2x00: Detect initial rfkill state on register
rt2x00: Remove unused variables
rt2x00: Remove data_desc structure
rt2x00: Release rt2x00 2.0.12
Mattias Nissler (4):
rt2x00: Fix antenna selection.
rt2x00: Rework rt61 antenna selection.
rt2x00: Rework rt73 antenna selection
rt2x00: Correctly set ACK bit in tx descriptors
drivers/net/wireless/rt2x00/rt2400pci.c | 104 +++++----
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 112 +++++-----
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 169 +++++++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 17 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 192 ++++++++++++----
drivers/net/wireless/rt2x00/rt2x00config.c | 95 ++++++++-
drivers/net/wireless/rt2x00/rt2x00debug.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 212 +++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +
drivers/net/wireless/rt2x00/rt2x00pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 44 ++++-
drivers/net/wireless/rt2x00/rt2x00ring.h | 23 +--
drivers/net/wireless/rt2x00/rt2x00usb.c | 38 +++-
drivers/net/wireless/rt2x00/rt2x00usb.h | 19 +-
drivers/net/wireless/rt2x00/rt61pci.c | 332 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt61pci.h | 14 +-
drivers/net/wireless/rt2x00/rt73usb.c | 198 ++++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 14 +-
21 files changed, 1071 insertions(+), 538 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2007-11-27 20:46 UTC (permalink / raw)
To: John W. Linville, linux-wireless, rt2400-devel
Hi John,
Here is the latest version of rt2x00.
Please merge the patches for 2.6.24
09 - Only update rssi average approximation on receiving beacon frames.
10 - Remove redundant code in rfkill setup
11 - Cleanup rfkill
All other patches can wait for 2.6.25, since they are code cleanups and the
new TX/RX frame dumping facility through debugfs.
Ivo
---
The following changes since commit 301df40749bdf144c72637795ba93d82e4b84682:
Johannes Berg (1):
mac80211: remove more forgotten code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Replace DRV_NAME with KBUILD_MODNAME
rt2x00: Extend PLCP descriptor definition for rt2400pci
rt2x00: Move register value/offset files into new folder
rt2x00: Add chipset version to chipset debugfs entry
rt2x00: Add skb descriptor
rt2x00: Add TX/RX frame dumping facility
rt2x00: Use IEEE80211_IF_TYPE_INVALID directly
rt2x00: Cleanup rfkill
rt2x00: Release rt2x00 2.0.13
Larry Finger (1):
rt2x00: Remove redundant code in rfkill setup
Mattias Nissler (1):
rt2x00: Only update rssi average approximation on receiving beacon frames.
drivers/net/wireless/rt2x00/rt2400pci.c | 49 ++----
drivers/net/wireless/rt2x00/rt2400pci.h | 20 ++-
drivers/net/wireless/rt2x00/rt2500pci.c | 9 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 39 +++--
drivers/net/wireless/rt2x00/rt2x00.h | 26 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 5 -
drivers/net/wireless/rt2x00/rt2x00debug.c | 240 +++++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00dev.c | 93 ++++++----
drivers/net/wireless/rt2x00/rt2x00firmware.c | 5 -
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +
drivers/net/wireless/rt2x00/rt2x00mac.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 59 +++++--
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 15 --
drivers/net/wireless/rt2x00/rt2x00ring.h | 22 +++
drivers/net/wireless/rt2x00/rt2x00usb.c | 41 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 36 +++--
drivers/net/wireless/rt2x00/rt73usb.c | 36 +++--
17 files changed, 484 insertions(+), 224 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-11-27 20:46 Ivo van Doorn
@ 2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2007-11-27 20:54 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi,
> Please merge the patches for 2.6.24
> 09 - Only update rssi average approximation on receiving beacon frames.
> 10 - Remove redundant code in rfkill setup
> 11 - Cleanup rfkill
Sorry that should be:
08 - Only update rssi average approximation on receiving beacon frames.
09 - Remove redundant code in rfkill setup
10 - Cleanup rfkill
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-11-27 20:54 ` Ivo van Doorn
@ 2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: John W. Linville @ 2007-11-29 22:26 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linux-wireless, rt2400-devel
On Tue, Nov 27, 2007 at 09:54:29PM +0100, Ivo van Doorn wrote:
> > Please merge the patches for 2.6.24
> Sorry that should be:
> 08 - Only update rssi average approximation on receiving beacon frames.
> 09 - Remove redundant code in rfkill setup
> 10 - Cleanup rfkill
Actually it looks to me like 9 and 10 apply to code that isn't in
2.6.24. 8 looks like it is close, but it doesn't quite apply either.
I'll try to massage it in -- hopefully Jeff won't mind the extra
trouble when rebasing...
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-11-29 22:26 ` John W. Linville
@ 2007-11-30 9:51 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2007-11-30 9:51 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
On Thursday 29 November 2007, John W. Linville wrote:
> On Tue, Nov 27, 2007 at 09:54:29PM +0100, Ivo van Doorn wrote:
>
> > > Please merge the patches for 2.6.24
>
> > Sorry that should be:
> > 08 - Only update rssi average approximation on receiving beacon frames.
> > 09 - Remove redundant code in rfkill setup
> > 10 - Cleanup rfkill
>
> Actually it looks to me like 9 and 10 apply to code that isn't in
> 2.6.24. 8 looks like it is close, but it doesn't quite apply either.
> I'll try to massage it in -- hopefully Jeff won't mind the extra
> trouble when rebasing...
9 and 10 should apply cleanly since the rfkill code hasn't changed for quite
some time now. In fact I believe it hasn't changed since the initial merge
to 2.6.24-rc.
Anyway, I'll try to create a patch for the upstream-jgarzik branch this weekend,
that would safe you and jeff some work. :)
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-01-06 22:37 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-01-06 22:37 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.0.14 release of rt2x00. Again lots of bugfixes,
and unfortunately we are still not there yet. I am afraid
rt2500usb and rt61pci are lost causes for the 2.6.24 release,
they are both broken, and I haven't figured out what is causing
this.
Next release will contain more interesting stuff, most of those
patches are already done, but due to testing and fine tuning I
have kept those patches back for this release. They primarily
cover basic support for virtual interfaces, led triggers, and some
first patches to make rt2x00lib support rt2800 (Yes, work on those
drivers has begun).
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.14/
Ivo
---
The following changes since commit 2d0811f5ed506397d85792abfd8ef0983f4e8b7c:
John W. Linville (1):
fixup 'everything' after 'upstream-davem' rebase and patch modification
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (12):
rt2x00: Fix chipset debugfs file
rt2x00: Always call ieee80211_stop_queue() when return NETDEV_TX_BUSY
rt2x00: Only set the TBCN flag when the interface is configured to send beacons.
rt2x00: Store queue idx and entry idx in data_ring and data_entry
rt2x00: Move start() and stop() handlers into rt2x00lib.c
rt2x00: Put 802.11 data on 4 byte boundary
rt2x00: Move packet filter flags
rt2x00: Cleanup write_tx_desc() arguments
rt2x00: Determine MY_BSS from descriptor
rt2x00: Move init_txring and init_rxring into rt2x00lib
rt2x00: Correctly initialize data and desc pointer
rt2x00: Release rt2x00 2.0.14
drivers/net/wireless/rt2x00/rt2400pci.c | 102 +++++++--------------
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 36 +++++---
drivers/net/wireless/rt2x00/rt2x00.h | 32 ++++---
drivers/net/wireless/rt2x00/rt2x00debug.c | 13 +--
drivers/net/wireless/rt2x00/rt2x00dev.c | 142 ++++++++++++++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 59 +++---------
drivers/net/wireless/rt2x00/rt2x00pci.c | 28 ++++--
drivers/net/wireless/rt2x00/rt2x00ring.h | 13 +++
drivers/net/wireless/rt2x00/rt2x00usb.c | 87 ++++++++----------
drivers/net/wireless/rt2x00/rt2x00usb.h | 5 +-
drivers/net/wireless/rt2x00/rt61pci.c | 114 +++++++++---------------
drivers/net/wireless/rt2x00/rt73usb.c | 35 ++++---
14 files changed, 378 insertions(+), 380 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-02-03 14:41 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-02-03 14:41 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.0 release of rt2x00.
The most important changes in this release:
- Queue handling overhaul
- Multiple virtual AP interfaces support for rt61 and rt73
- LED class support
- Adhoc & master mode enabled
Note that this patch series is _not_ intended for 2.6.25,
a lot might still be broken because the code has changed so much.
Adhoc and master mode is only enabled for testing purposes, in no way
it means that it is working for all drivers...
With these changes adding support for rt2800pci and rt2800usb will
be easier as well. Hopefully I can soon provide an initial version for
those 2 drivers as well.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.1.0/
Ivo
---
The following changes since commit e0e6138382c56aa99a1aabe5dddddbb332b5a4f8:
Stefano Brivio (1):
rc80211-pid: fix rate adjustment
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: don't write past the end when writing short descriptors on rt61
Ivo van Doorn (18):
rt2x00: Update copyright notice
rt2x00: Queue handling overhaul
rt2x00: Add new USB ID to rt2500usb
rt2x00: Fix tx parameter initialization
rt2x00: Enable master and adhoc mode again
rt2x00: Driver requiring firmware should select crc algo
rt2x00: Add per-interface structure
rt2x00: Rate structure overhaul
rt2x00: Remove HWMODE_{A,B,G}
rt2x00: Remove TX_MGMT queue usage
rt2x00: Initialize QID from queue->qid
rt2x00: Use ieee80211_channel_to_frequency()
rt2x00: Make use of MAC80211_LED_TRIGGERS
rt2x00: Enable LED class support for rt2500usb/rt73usb
rt2x00: Fix rate initialization
rt2x00: Move beacon and atim queue defines into rt2x00
rt2x00: Fix queue index handling
rt2x00: Release rt2x00 2.1.0
drivers/net/wireless/rt2x00/Kconfig | 43 ++
drivers/net/wireless/rt2x00/Makefile | 6 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 431 +++++++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 436 +++++++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 2 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 497 ++++++++++--------
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +-
drivers/net/wireless/rt2x00/rt2x00.h | 288 ++++++-----
drivers/net/wireless/rt2x00/rt2x00config.c | 140 +++---
drivers/net/wireless/rt2x00/rt2x00debug.c | 34 +-
drivers/net/wireless/rt2x00/rt2x00debug.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 756 +++++++++++---------------
drivers/net/wireless/rt2x00/rt2x00dump.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00firmware.c | 43 ++-
drivers/net/wireless/rt2x00/rt2x00leds.c | 217 ++++++++
drivers/net/wireless/rt2x00/rt2x00leds.h | 63 +++
drivers/net/wireless/rt2x00/rt2x00lib.h | 100 ++++-
drivers/net/wireless/rt2x00/rt2x00mac.c | 221 +++++---
drivers/net/wireless/rt2x00/rt2x00pci.c | 238 ++++-----
drivers/net/wireless/rt2x00/rt2x00pci.h | 57 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 295 ++++++++++
drivers/net/wireless/rt2x00/rt2x00queue.h | 447 +++++++++++++++
drivers/net/wireless/rt2x00/rt2x00reg.h | 75 +---
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 290 ----------
drivers/net/wireless/rt2x00/rt2x00usb.c | 345 ++++++++-----
drivers/net/wireless/rt2x00/rt2x00usb.h | 179 +++++--
drivers/net/wireless/rt2x00/rt61pci.c | 601 +++++++++++----------
drivers/net/wireless/rt2x00/rt61pci.h | 21 +-
drivers/net/wireless/rt2x00/rt73usb.c | 468 +++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 20 +-
32 files changed, 3831 insertions(+), 2501 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00leds.c
create mode 100644 drivers/net/wireless/rt2x00/rt2x00leds.h
create mode 100644 drivers/net/wireless/rt2x00/rt2x00queue.c
create mode 100644 drivers/net/wireless/rt2x00/rt2x00queue.h
delete mode 100644 drivers/net/wireless/rt2x00/rt2x00ring.h
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-02-10 21:46 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-02-10 21:46 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a quick followup release labeled 2.1.1. The previous release
contained many bugs as it was mostly untested. Result was there
were critical issues with it, of which some have now been fixed.
The most critical issues are random panics due to corrupt memory access,
at the moment none of the drivers are displaying any activity yet where
rt73usb is still crashing at random times.
Ivo
---
The following changes since commit d86916b7d36c4f0db8634fcc17fe2d747b317f17:
John W. Linville (1):
Merge branch 'at76' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: correct address calc for queue private data
Ivo van Doorn (13):
rt2x00: Fix invalid DMA free
rt2x00: Make rt2x00 less verbose
rt2x00: Remove MGMT ring initialization
rt2x00: Select CONFIG_NEW_LEDS
rt2x00: make csr_cache and csr_addr an union
rt2x00: Fix scheduling while atomic errors in usb drivers
rt2x00: Add queue statistics to debugfs
rt2x00: Fix typo in debug statement
rt2x00: Fix skbdesc->data_len initialization
rt2x00: Fix queue->qid initialization
rt2x00: Cleanup Makefile
rt2x00: Kill guardian urb during disable_radio
rt2x00: Release rt2x00 2.1.1
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/Makefile | 41 +++++-------
drivers/net/wireless/rt2x00/rt2400pci.c | 4 -
drivers/net/wireless/rt2x00/rt2500pci.c | 4 -
drivers/net/wireless/rt2x00/rt2500usb.c | 6 +--
drivers/net/wireless/rt2x00/rt2x00.h | 12 ++--
drivers/net/wireless/rt2x00/rt2x00debug.c | 90 ++++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00mac.c | 9 +++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 99 +++++++++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 36 ++++++-----
drivers/net/wireless/rt2x00/rt2x00usb.c | 37 ++++++++---
drivers/net/wireless/rt2x00/rt61pci.c | 8 +--
drivers/net/wireless/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 +--
15 files changed, 231 insertions(+), 134 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-02-17 16:30 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:30 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.2 release of rt2x00. Several important bugfixes like a
partial return of TX/RX activity in the PCI drivers.
Note that _none_ of the drivers (PCI or USB) are in a good shape since the
2.1.0 release. With partial RX/TX activity we are at least now on a similar
behavior as the 2.0.14 version inside kernel 2.6.25.
Speaking of the 2.6.25 kernel, it seems that rt2x00 is not in an all too good
shape in there. If more reports about broken TX/RX come in I will consider
reverting a lot of patches to make rt2x00 look a lot like the version in 2.6.24.
That version wasn't good either, but at least people can't complain about
regressions. ;)
Also note that the git pull request below also contains the patches from
previous pull request. But I noticed that you hadn't pulled in the 2.1.1 release yet.
I won't resent those patches to the list, since there aren't any changes in them
since last week. ;)
Ivo
---
The following changes since commit 2b78397a79d3daa2ba6c633526a7e3b455f9fc73:
Stefano Brivio (1):
b43legacy: Add driver load messages
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: correct address calc for queue private data
Gertjan van Wingerde (1):
Fix hw mode registration with mac80211.
Ivo van Doorn (23):
rt2x00: Fix invalid DMA free
rt2x00: Make rt2x00 less verbose
rt2x00: Remove MGMT ring initialization
rt2x00: Select CONFIG_NEW_LEDS
rt2x00: make csr_cache and csr_addr an union
rt2x00: Fix scheduling while atomic errors in usb drivers
rt2x00: Add queue statistics to debugfs
rt2x00: Fix typo in debug statement
rt2x00: Fix skbdesc->data_len initialization
rt2x00: Fix queue->qid initialization
rt2x00: Cleanup Makefile
rt2x00: Kill guardian urb during disable_radio
rt2x00: Release rt2x00 2.1.1
rt2x00: Send frames out with configured TX power
rt2x00: Don't report driver generated frames to tx_status()
rt2x00: Fix Descriptor DMA initialization
rt2x00: Filter ACK_CTS based on FIF_CONTROL
rt2x00: Remove reset_tsf()
rt2x00: Rename dscape -> mac80211
rt2x00: Cleanup mode registration
rt2x00: Remove async vendor request calls from rt2x00usb
rt2x00: Fix MAC address defines in rt61pci
rt2x00: Release rt2x00 2.1.2
drivers/net/wireless/rt2x00/Kconfig | 3 +-
drivers/net/wireless/rt2x00/Makefile | 41 ++++-------
drivers/net/wireless/rt2x00/rt2400pci.c | 39 ++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 38 ++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 23 ++++---
drivers/net/wireless/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00.h | 50 ++++++++-----
drivers/net/wireless/rt2x00/rt2x00debug.c | 90 ++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00dev.c | 100 +++++++++++++++------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 5 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 24 ++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 108 +++++++++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 14 ++--
drivers/net/wireless/rt2x00/rt2x00queue.c | 36 +++++----
drivers/net/wireless/rt2x00/rt2x00queue.h | 12 +++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 90 +++++++-----------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 18 -----
drivers/net/wireless/rt2x00/rt61pci.c | 54 ++++++--------
drivers/net/wireless/rt2x00/rt61pci.h | 12 ++--
drivers/net/wireless/rt2x00/rt73usb.c | 56 +++++++--------
drivers/net/wireless/rt2x00/rt73usb.h | 4 +-
23 files changed, 453 insertions(+), 378 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-02-25 22:20 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-02-25 22:20 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.3 release of rt2x00.
Most bugfixes concentrate on the link tuner issues reported for
the rt2x00 2.0.14 version inside kernel 2.6.25.
One additional fix for rt61pci is present where the recent
"mode->band" changes in mac80211 contained a bug for rt61pci.
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-03-09 21:37 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-03-09 21:37 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
This is the latest version of rt2x00: 2.1.4
All drivers are now showing excellent progress, rt2400pci, rt2500pci, rt61pci and rt73usb
seem to be working as expected now. And only rt2500usb is spoiling things by having
only a working RX but no TX.
After this patch series, it is highly likely you can close a lot of rt2x00 related bugs
in the Fedora bugzilla. :)
Ivo
---
The following changes since commit 4f739cf30891f277a6353d61275489528fab64e3:
Pavel Roskin (1):
at76_usb: make the driver depend on MAC80211
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (2):
rt2x00: never disable multicast because it disables broadcast too
rt2x00:correct rx packet length for USB devices
Ivo van Doorn (18):
rt2x00: Align RX descriptor to 4 bytes
rt2x00: Don't use uninitialized desc_len
rt2x00: Use skbdesc fields for descriptor initialization
rt2x00: Add new D-Link USB ID
rt2x00: Only disable beaconing just before beacon update
rt2x00: Upgrade queue->lock to use irqsave
rt2x00: Move firmware checksumming to driver
rt2x00: Start bugging when rt2x00lib doesn't filter SW diversity
rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flag
rt2x00: Rename config_preamble() to config_erp()
rt2x00: Add suspend/resume handlers to rt2x00rfkill
rt2x00: Make rt2x00leds_register return void
rt2x00: Always enable TSF ticking
rt2x00: Fix basic rate initialization
rt2x00: Fix compile error when rfkill is disabled
rt2x00: Fix RX DMA ring initialization
rt2x00: Fix rt2400pci signal
rt2x00: Release rt2x00 2.1.4
Luis Correia (1):
rt2x00: Fix trivial log message
Mattias Nissler (3):
rt2x00: Initialize TX control field in data entries
rt2x00: Use the correct size when copying the control info in txdone
rt2x00: Don't use unitialized rxdesc->size
drivers/net/wireless/rt2x00/Kconfig | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 67 +++++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 71 ++++++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 97 ++++++++++---------
drivers/net/wireless/rt2x00/rt2x00.h | 31 ++++--
drivers/net/wireless/rt2x00/rt2x00config.c | 62 +++++++-----
drivers/net/wireless/rt2x00/rt2x00debug.c | 5 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 108 +++++++++------------
drivers/net/wireless/rt2x00/rt2x00firmware.c | 34 +-------
drivers/net/wireless/rt2x00/rt2x00leds.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 45 ++++-----
drivers/net/wireless/rt2x00/rt2x00mac.c | 22 +++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 1 +
drivers/net/wireless/rt2x00/rt2x00queue.c | 17 ++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 3 +
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 116 +++++++++++++++--------
drivers/net/wireless/rt2x00/rt2x00usb.c | 19 ++++-
drivers/net/wireless/rt2x00/rt61pci.c | 104 ++++++++++++--------
drivers/net/wireless/rt2x00/rt73usb.c | 131 +++++++++++++++-----------
20 files changed, 524 insertions(+), 426 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-04-21 17:06 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Finally a new official rt2x00 release,
off course I have send a lot of patches over the past few weeks
with several bugfixes, but now I am bumping the versions to 2.1.5.
Please consider this patch series for the 2.6.26 kernel,
they are all either bugfixes or minor cleanups.
with the exception of "[PATCH 4/9] rt2x00: Use rt2x00 queue numbering"
which besides a cleanup will also help with the pending mac80211
queue reorganization to QDisc.
Ivo
PS. Don't be alarmed over the "The following changes since commit"
line below which indicates "mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE"
is used as basis. That patch is _not_ present in the rt2x00.git upstream branch
and none of the following patches depend on that patch.
---
The following changes since commit c8b29c460a389a8561189ad2a77fcb697ef35df9:
Ivo van Doorn (1):
mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Support hardware RTS and CTS-to-self frames
rt2x00: Remove DRIVER_SUPPORT_MIXED_INTERFACES
rt2x00: Don't enable short preamble for 1MBs
rt2x00: Use rt2x00 queue numbering
rt2x00: Fix quality/activity led handling
rt2x00: Clarify supported chipsets in Kconfig
rt2x00: Add helper macros
rt2x00: Fix kernel-doc
rt2x00: Release rt2x00 2.1.5
drivers/net/wireless/rt2x00/Kconfig | 55 +++++++++++++++++------------
drivers/net/wireless/rt2x00/rt2400pci.c | 36 +++++++------------
drivers/net/wireless/rt2x00/rt2500pci.c | 39 +++++++-------------
drivers/net/wireless/rt2x00/rt2500usb.c | 22 ++++-------
drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++-----
drivers/net/wireless/rt2x00/rt2x00dev.c | 5 ++-
drivers/net/wireless/rt2x00/rt2x00leds.c | 15 ++++++++
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +++
drivers/net/wireless/rt2x00/rt2x00mac.c | 31 +++++++++-------
drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 6 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 6 ++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 40 +++++++++++++-------
drivers/net/wireless/rt2x00/rt2x00usb.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 21 +++++++++--
drivers/net/wireless/rt2x00/rt61pci.c | 29 +++++----------
drivers/net/wireless/rt2x00/rt73usb.c | 35 +++++++-----------
17 files changed, 191 insertions(+), 179 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-04-21 17:06 Ivo van Doorn
@ 2008-05-01 8:29 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-01 8:29 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
> Finally a new official rt2x00 release,
> off course I have send a lot of patches over the past few weeks
> with several bugfixes, but now I am bumping the versions to 2.1.5.
>
> Please consider this patch series for the 2.6.26 kernel,
Was this patch series in time for the 2.6.26 merge window?
If not, please consider merging at least the following patches since
they are real bugfixes:
> rt2x00: Don't enable short preamble for 1MBs
> rt2x00: Fix quality/activity led handling
> rt2x00: Clarify supported chipsets in Kconfig
The others are code cleanups which are "nice to have", but could otherwise
wait for 2.6.27.
> rt2x00: Support hardware RTS and CTS-to-self frames
> rt2x00: Remove DRIVER_SUPPORT_MIXED_INTERFACES
> rt2x00: Use rt2x00 queue numbering
> rt2x00: Add helper macros
> rt2x00: Fix kernel-doc
> rt2x00: Release rt2x00 2.1.5
Thanks,
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
@ 2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-05 17:31 ` John W. Linville
0 siblings, 2 replies; 66+ messages in thread
From: Scott White @ 2008-05-02 21:04 UTC (permalink / raw)
To: linux-wireless
>Was this patch series in time for the 2.6.26 merge window?
>
>If not, please consider merging at least the following patches since
>they are real bugfixes:
>
>> rt2x00: Don't enable short preamble for 1MBs
>> rt2x00: Fix quality/activity led handling
>> rt2x00: Clarify supported chipsets in Kconfig
>
>The others are code cleanups which are "nice to have", but could otherwise
>wait for 2.6.27.
The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
Thanks,
_________________________________________________________________
Windows Live SkyDrive lets you share files with faraway friends.
http://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refresh_skydrive_052008
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:04 Scott White
@ 2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
1 sibling, 2 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-02 21:25 UTC (permalink / raw)
To: Scott White; +Cc: linux-wireless
On Friday 02 May 2008, Scott White wrote:
>
> >Was this patch series in time for the 2.6.26 merge window?
> >
> >If not, please consider merging at least the following patches since
> >they are real bugfixes:
> >
> >> rt2x00: Don't enable short preamble for 1MBs
> >> rt2x00: Fix quality/activity led handling
> >> rt2x00: Clarify supported chipsets in Kconfig
> >
> >The others are code cleanups which are "nice to have", but could otherwise
> >wait for 2.6.27.
>
> The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
It seems to have helped with several other users.
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:25 ` Ivo van Doorn
@ 2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
1 sibling, 1 reply; 66+ messages in thread
From: Mattias Nissler @ 2008-05-03 6:19 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Scott White, linux-wireless
On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> On Friday 02 May 2008, Scott White wrote:
> >
> > >Was this patch series in time for the 2.6.26 merge window?
> > >
> > >If not, please consider merging at least the following patches since
> > >they are real bugfixes:
> > >
> > >> rt2x00: Don't enable short preamble for 1MBs
> > >> rt2x00: Fix quality/activity led handling
> > >> rt2x00: Clarify supported chipsets in Kconfig
> > >
> > >The others are code cleanups which are "nice to have", but could otherwise
> > >wait for 2.6.27.
> >
> > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
>
> Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> It seems to have helped with several other users.
For rt73? IIRC the rate selection algo does not work at all for that
device, because we cannot report failed frames. Or have you done
anything about that I might have missed, Ivo? If not, the rate is
probably fixed at 54Mbit anyway.
Mattias
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 6:19 ` Mattias Nissler
@ 2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-03 9:58 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Scott White, linux-wireless
On Saturday 03 May 2008, Mattias Nissler wrote:
> On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> > On Friday 02 May 2008, Scott White wrote:
> > >
> > > >Was this patch series in time for the 2.6.26 merge window?
> > > >
> > > >If not, please consider merging at least the following patches since
> > > >they are real bugfixes:
> > > >
> > > >> rt2x00: Don't enable short preamble for 1MBs
> > > >> rt2x00: Fix quality/activity led handling
> > > >> rt2x00: Clarify supported chipsets in Kconfig
> > > >
> > > >The others are code cleanups which are "nice to have", but could otherwise
> > > >wait for 2.6.27.
> > >
> > > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
> >
> > Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> > It seems to have helped with several other users.
>
> For rt73? IIRC the rate selection algo does not work at all for that
> device, because we cannot report failed frames. Or have you done
> anything about that I might have missed, Ivo? If not, the rate is
> probably fixed at 54Mbit anyway.
Well I didn't do anything new, but this line will report rt2x00lib that the
frame was succesfully send or failed to send:
txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
What is missing is the retry count, since that is something that
the USB drivers cannot report. (Unless I grab the max retry count
as configured by mac80211 as the number of retries on failure)
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 9:58 ` Ivo van Doorn
@ 2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Mattias Nissler @ 2008-05-03 10:18 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Scott White, linux-wireless
On Sat, 2008-05-03 at 11:58 +0200, Ivo van Doorn wrote:
> On Saturday 03 May 2008, Mattias Nissler wrote:
> > On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> > > On Friday 02 May 2008, Scott White wrote:
> > > >
> > > > >Was this patch series in time for the 2.6.26 merge window?
> > > > >
> > > > >If not, please consider merging at least the following patches since
> > > > >they are real bugfixes:
> > > > >
> > > > >> rt2x00: Don't enable short preamble for 1MBs
> > > > >> rt2x00: Fix quality/activity led handling
> > > > >> rt2x00: Clarify supported chipsets in Kconfig
> > > > >
> > > > >The others are code cleanups which are "nice to have", but could otherwise
> > > > >wait for 2.6.27.
> > > >
> > > > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
> > >
> > > Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> > > It seems to have helped with several other users.
> >
> > For rt73? IIRC the rate selection algo does not work at all for that
> > device, because we cannot report failed frames. Or have you done
> > anything about that I might have missed, Ivo? If not, the rate is
> > probably fixed at 54Mbit anyway.
>
> Well I didn't do anything new, but this line will report rt2x00lib that the
> frame was succesfully send or failed to send:
> txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
> What is missing is the retry count, since that is something that
> the USB drivers cannot report. (Unless I grab the max retry count
> as configured by mac80211 as the number of retries on failure)
Well, I have just put my rt73 into a metal box. Many frames do fail,
only very few get through pinging my AP. The rate control still keeps
the rate at 54Mbit/s :-) So it seems neither excessive_retries nor the
retry_count in the tx_status struct is set at all.
Mattias
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 10:18 ` Mattias Nissler
@ 2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-03 15:02 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Scott White, linux-wireless
> > > For rt73? IIRC the rate selection algo does not work at all for that
> > > device, because we cannot report failed frames. Or have you done
> > > anything about that I might have missed, Ivo? If not, the rate is
> > > probably fixed at 54Mbit anyway.
> >
> > Well I didn't do anything new, but this line will report rt2x00lib that the
> > frame was succesfully send or failed to send:
> > txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
> > What is missing is the retry count, since that is something that
> > the USB drivers cannot report. (Unless I grab the max retry count
> > as configured by mac80211 as the number of retries on failure)
>
> Well, I have just put my rt73 into a metal box. Many frames do fail,
> only very few get through pinging my AP. The rate control still keeps
> the rate at 54Mbit/s :-) So it seems neither excessive_retries nor the
> retry_count in the tx_status struct is set at all.
Hmm, perhaps we need some way the driver can inform the rate selection
module about statistics. I mean the hardware does measure the number
of failed TX frames, and the number of retries, but it doesn't set them
in the descriptor but in the hardware.
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:02 ` Ivo van Doorn
@ 2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
0 siblings, 1 reply; 66+ messages in thread
From: Johannes Berg @ 2008-05-03 15:27 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Mattias Nissler, Scott White, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 305 bytes --]
> Hmm, perhaps we need some way the driver can inform the rate selection
> module about statistics. I mean the hardware does measure the number
> of failed TX frames, and the number of retries, but it doesn't set them
> in the descriptor but in the hardware.
Yes we should have this.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:27 ` Johannes Berg
@ 2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Mattias Nissler @ 2008-05-03 15:38 UTC (permalink / raw)
To: Johannes Berg; +Cc: Ivo van Doorn, Scott White, linux-wireless
On Sat, 2008-05-03 at 17:27 +0200, Johannes Berg wrote:
> > Hmm, perhaps we need some way the driver can inform the rate selection
> > module about statistics. I mean the hardware does measure the number
> > of failed TX frames, and the number of retries, but it doesn't set them
> > in the descriptor but in the hardware.
>
> Yes we should have this.
New rate control algorithm probably. Or even better: Split what is
currently the rate control algorithm into an link quality estimation
part (failed frames percentage and such) and the actual rate control
that interprets that value and acts accordingly.
Mattias
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:38 ` Mattias Nissler
@ 2008-05-03 16:56 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-03 16:56 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Johannes Berg, Scott White, linux-wireless
On Saturday 03 May 2008, Mattias Nissler wrote:
> On Sat, 2008-05-03 at 17:27 +0200, Johannes Berg wrote:
> > > Hmm, perhaps we need some way the driver can inform the rate selection
> > > module about statistics. I mean the hardware does measure the number
> > > of failed TX frames, and the number of retries, but it doesn't set them
> > > in the descriptor but in the hardware.
> >
> > Yes we should have this.
>
> New rate control algorithm probably. Or even better: Split what is
> currently the rate control algorithm into an link quality estimation
> part (failed frames percentage and such) and the actual rate control
> that interprets that value and acts accordingly.
Hmm, splitting that up would be nice, especially when the driver
will have access to those failed frame percentages directly.
rt2x00 currently keeps track of these statistics to perform link tuning,
I wouldn't be surprised if other drivers also keep similar statistics for
the same reason.
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* RE: Please pull 'upstream' branch of rt2x00
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
@ 2008-05-03 19:29 ` Scott White
1 sibling, 0 replies; 66+ messages in thread
From: Scott White @ 2008-05-03 19:29 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linux-wireless
> To: nwi_sub@hotmail.com
> Subject: Re: Please pull 'upstream' branch of rt2x00
> Date: Fri, 2 May 2008 23:25:38 +0200
> CC: linux-wireless@vger.kernel.org
> From: ivdoorn@gmail.com
>
> On Friday 02 May 2008, Scott White wrote:
>>
>>>Was this patch series in time for the 2.6.26 merge window?
>>>
>>>If not, please consider merging at least the following patches since
>>>they are real bugfixes:
>>>
>>>> rt2x00: Don't enable short preamble for 1MBs
>>>> rt2x00: Fix quality/activity led handling
>>>> rt2x00: Clarify supported chipsets in Kconfig
>>>
>>>The others are code cleanups which are "nice to have", but could otherwise
>>>wait for 2.6.27.
>>
>> The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
>
> Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> It seems to have helped with several other users.
>
> Ivo
No I haven't tried that. However I have 54Mbit (g) at home, but only 11Mbit (b only) at work. I guess I would have to change the rate when I change locations.
Thanks,
_________________________________________________________________
Make Windows Vista more reliable and secure with Windows Vista Service Pack 1.
http://www.windowsvista.com/SP1?WT.mc_id=hotmailvistasp1banner
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-05-05 15:23 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-05 15:23 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here are 3 patches for rt2x00, they are all intended for 2.6.26 since
they fix serious bugs. Patch 1 should prevent problems as reported by
Johannes Berg regarding skb->truesize by removing the only pskb_expand_head()
call in rt2x00 (and use a already existing buffer instead).
Patches 2 and 3 fix problems when DMA allocation fails, that usually doesn't happen,
hence the reason these problems have gone unnoticed for so long. :S
Ivo
---
The following changes since commit 0bacadffc86bcba2fdf2b989afc286a8184664a0:
Ivo van Doorn (1):
rt2x00: Fix quality/activity led handling
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (1):
rt2x00: Clean up error handling of PCI queue DMA allocation.
Ivo van Doorn (2):
rt2x00: Don't use pskb_expand_head()
rt2x00: Fix broken recover-on-error path
drivers/net/wireless/rt2x00/rt2x00dev.c | 11 ++++-------
drivers/net/wireless/rt2x00/rt2x00pci.c | 5 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 31 +++++++++++--------------------
3 files changed, 18 insertions(+), 29 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
@ 2008-05-05 17:31 ` John W. Linville
1 sibling, 0 replies; 66+ messages in thread
From: John W. Linville @ 2008-05-05 17:31 UTC (permalink / raw)
To: Scott White; +Cc: linux-wireless
On Fri, May 02, 2008 at 04:04:52PM -0500, Scott White wrote:
>
> >Was this patch series in time for the 2.6.26 merge window?
> >
> >If not, please consider merging at least the following patches since
> >they are real bugfixes:
> >
> >> rt2x00: Don't enable short preamble for 1MBs
> >> rt2x00: Fix quality/activity led handling
> >> rt2x00: Clarify supported chipsets in Kconfig
> >
> >The others are code cleanups which are "nice to have", but could otherwise
> >wait for 2.6.27.
>
> The merge window is still open at this time. I haven't seen
> a rc1 yet. Anyway I saw that only the 3 bugfixes are currently
> in the queue. As the owner of several (10 by the university and
> 2 personal) rt73 usb wireless cards, I would really like it if the
> latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24
> and finished compiling 2.6.25 two days ago I find that the driver in
> both kernels is not good. Not good means I get a wireless signal and
> I get data transfers, but the speed fluctuates and have other issues.
> However with each release, the problems I have are slowing decreasing.
> I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5
> was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
I'm sorry, but this isn't how the merge window is used. The merge
window is for merging code that is _already_ pending when the
window opens. No one should wait for the merge window to open before
sending code to the upstream maintainers. (I'm not suggesting that
Ivo delayed on purpose, I'm just stating the policy.)
Anything that fixes an actual bug can still go to 2.6.26 over the
next several weeks. But code that is simply new development will
have to wait for 2.6.27's merge window before it gets to Linus.
Thanks,
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-10 11:37 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel, Johannes Berg
Hi John,
Here is a new rt2x00 release.
Please note that some patches have been send individually to linux-wireless before,
(including the 2 mac80211 patches) but for completeness I have added them to
this pull request.
This will bump rt2x00 to version 2.1.6, most patches are only intended to make
room for future patches like the mac80211 patch series from Johannes, HW crypto
and pci drivers without a preallocated big chunk of DMA.
Ivo
---
The following changes since commit d30d1674356e223c9f2c164ac9d0be35af8ee4e0:
Johannes Berg (1):
mac80211: fix wme code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (3):
rt2x00: Clean up error handling of PCI queue DMA allocation.
rt2x00: Fix queue related oops in case of deselected mac80211 multi-queue feature.
rt2x00: Only initialize the minimum needed fields of PCI TX descriptors.
Ivo van Doorn (13):
rt2x00: Don't use pskb_expand_head()
rt2x00: Fix broken recover-on-error path
mac80211: Don't encrypt beacons
mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
rt2x00: trim skb_frame_desc to 32 bytes
rt2x00: Fix TX status reporting
rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()
rt2x00: Preserve descriptor information after memmove()
rt2x00: Split rt2x00lib_write_tx_desc()
rt2x00: Remove redundant flags/dev_flags initializations
rt2x00: Merge RX and TX entry private data
rt2x00: Remove extra +
rt2x00: Release rt2x00 2.1.6
drivers/net/wireless/rt2x00/rt2400pci.c | 126 +++++++++-------
drivers/net/wireless/rt2x00/rt2400pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500pci.c | 114 ++++++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500usb.c | 78 +++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 48 +++++--
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 190 +++---------------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 105 +++++--------
drivers/net/wireless/rt2x00/rt2x00pci.h | 22 +---
drivers/net/wireless/rt2x00/rt2x00queue.c | 165 ++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 45 ++++--
drivers/net/wireless/rt2x00/rt2x00reg.h | 11 --
drivers/net/wireless/rt2x00/rt2x00usb.c | 228 +++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 17 +--
drivers/net/wireless/rt2x00/rt61pci.c | 146 ++++++++++---------
drivers/net/wireless/rt2x00/rt61pci.h | 5 +
drivers/net/wireless/rt2x00/rt73usb.c | 53 ++++----
drivers/net/wireless/rt2x00/rt73usb.h | 5 +
include/net/mac80211.h | 25 +++-
net/mac80211/tx.c | 1 +
net/mac80211/util.c | 37 +++++-
25 files changed, 794 insertions(+), 654 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 11:37 Ivo van Doorn
@ 2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: drago01 @ 2008-05-10 12:48 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> Hi John,
>
> Here is a new rt2x00 release.
> Please note that some patches have been send individually to linux-wireless before,
> (including the 2 mac80211 patches) but for completeness I have added them to
> this pull request.
>
> This will bump rt2x00 to version 2.1.6, most patches are only intended to make
> room for future patches like the mac80211 patch series from Johannes, HW crypto
> and pci drivers without a preallocated big chunk of DMA.
>
> Ivo
whats the current status of rt2860 support?
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 12:48 ` drago01
@ 2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-05-10 13:06 UTC (permalink / raw)
To: drago01; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Saturday 10 May 2008, drago01 wrote:
> On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> > Hi John,
> >
> > Here is a new rt2x00 release.
> > Please note that some patches have been send individually to linux-wireless before,
> > (including the 2 mac80211 patches) but for completeness I have added them to
> > this pull request.
> >
> > This will bump rt2x00 to version 2.1.6, most patches are only intended to make
> > room for future patches like the mac80211 patch series from Johannes, HW crypto
> > and pci drivers without a preallocated big chunk of DMA.
> >
> > Ivo
>
> whats the current status of rt2860 support?
Under development.
Ivo
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 13:06 ` Ivo van Doorn
@ 2008-05-10 13:15 ` drago01
0 siblings, 0 replies; 66+ messages in thread
From: drago01 @ 2008-05-10 13:15 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Sat, May 10, 2008 at 3:06 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> On Saturday 10 May 2008, drago01 wrote:
>> On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
>> > Hi John,
>> >
>> > Here is a new rt2x00 release.
>> > Please note that some patches have been send individually to linux-wireless before,
>> > (including the 2 mac80211 patches) but for completeness I have added them to
>> > this pull request.
>> >
>> > This will bump rt2x00 to version 2.1.6, most patches are only intended to make
>> > room for future patches like the mac80211 patch series from Johannes, HW crypto
>> > and pci drivers without a preallocated big chunk of DMA.
>> >
>> > Ivo
>>
>> whats the current status of rt2860 support?
>
> Under development.
well ok ;)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-06-08 21:41 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-06-08 21:41 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the official pull request for the latest rt2x00.git.
This contains all patches which I had send last tuesday
plus some additional patches intended for 2.6.27.
This series is mostly intended to get the fragmentation
done right. Up until now the drivers never behaved that
nicely with fragmentation or RTS/CTS-to-sellf which was
mostly due because each individual frame forced the
queue to be kicked immediately without waiting for the
other fragments.
It also contains some front work by Gertjan for reducing
DMA requirements in rt2x00 by making use of pci_map_single
on skbuffers instead of preallocating a chunk of DMA.
Ivo
P.S. I won't resend the patches I had send last tuesday
since nothing has changed with them. So only the 10
new patches will be send seperately. I am not sure
if that feature will be ready/stable for 2.6.27 but this
preperational work is harmless for normal operations
to it is better if that is already in.
---
The following changes since commit ef28eab0c928fe8277d7c3dca234c29f734d7f2e:
Dan Williams (1):
ipw2200: queue direct scans
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (5):
rt2x00: Restrict DMA to 32-bit addresses.
rt2x00: Cleanup struct skb_frame_desc.
rt2x00: Centralize RX packet alignment handling in rt2x00lib.
rt2x00: Fix double usage of skb->cb in USB RX path.
rt2x00: Rework alignment check.
Ivo van Doorn (15):
rt2x00: Calculate register offset during compile time
rt2x00: Cleanup/optimize set_state() function callback function
rt2x00: Move led initialization into function
rt2x00: Remove CTS/RTS check in tx()
rt2x00: Removed unused descriptor read in txdone
rt2x00: Don't kill guardian_urb when it wasn't created
rt2x00: Make rt2x00_set/get_field macros
rt2x00: Release rt2x00 2.1.7
rt2x00: Fix queue initialization
rt2x00: Implement rt2x00usb_kick_tx_queue()
rt2x00: Move generic TX frame writing code into rt2x00queue
rt2x00: Don't kick TX queue after each frame
rt2x00: Use __builtin_choose_expr() instead of ?:
rt2x00: Clear IEEE80211_TX_CTL_USE_RTS_CTS flag for RTS frame
rt2x00: Remove unused defines
drivers/net/wireless/rt2x00/rt2400pci.c | 95 ++++++++---------
drivers/net/wireless/rt2x00/rt2400pci.h | 2 -
drivers/net/wireless/rt2x00/rt2500pci.c | 91 +++++++--------
drivers/net/wireless/rt2x00/rt2500pci.h | 2 -
drivers/net/wireless/rt2x00/rt2500usb.c | 98 ++++++++--------
drivers/net/wireless/rt2x00/rt2500usb.h | 2 -
drivers/net/wireless/rt2x00/rt2x00.h | 13 ++-
drivers/net/wireless/rt2x00/rt2x00debug.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 21 ++++
drivers/net/wireless/rt2x00/rt2x00lib.h | 1 +
drivers/net/wireless/rt2x00/rt2x00mac.c | 30 ++----
drivers/net/wireless/rt2x00/rt2x00pci.c | 75 ++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 11 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 111 ++++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00queue.h | 27 +++--
drivers/net/wireless/rt2x00/rt2x00reg.h | 134 +++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00usb.c | 170 +++++++++++------------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 +++-
drivers/net/wireless/rt2x00/rt61pci.c | 111 ++++++++-----------
drivers/net/wireless/rt2x00/rt61pci.h | 2 -
drivers/net/wireless/rt2x00/rt73usb.c | 112 +++++++++----------
drivers/net/wireless/rt2x00/rt73usb.h | 2 -
22 files changed, 581 insertions(+), 557 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-06-16 17:58 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-06-16 17:58 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the latest version bump of rt2x00: 2.1.8
Most important patches are from Gertjan, which reduce
the amount of pre-allocated DMA for all TX queues.
All PCI drivers now TX/RX all frame data directly
from/to the skb buffer saving kilobytes of allocated DMA
and several memcpy() statements.
This also allows a lot of code to be moved out of rt2x00pci/rt2x00usb
and into rt2x00lib which in turn makes management of everything
much easier.
Ivo
---
The following changes since commit 7b57047e2d34c243c4cf2d778df0b34bfdd82c8e:
John W. Linville (1):
iwlwifi: fix build breakage
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (4):
rt2x00: Properly clean up beacon skbs.
rt2x00: Convert rt2x00 to use generic DMA-mapping API
rt2x00: Centralize allocation of RX skbs.
rt2x00: Replace statically allocated DMA buffers with mapped skb's.
Ivo van Doorn (5):
rt2x00: Use ieee80211 fc handlers
rt2x00: Cleanup symbol exports
rt2x00: Fix sparse warning on nested container_of()
rt2x00: Increase queue size
rt2x00: Release rt2x00 2.1.8
drivers/net/wireless/rt2x00/rt2400pci.c | 17 ++--
drivers/net/wireless/rt2x00/rt2500pci.c | 14 ++-
drivers/net/wireless/rt2x00/rt2500usb.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00.h | 59 ++---------
drivers/net/wireless/rt2x00/rt2x00dev.c | 100 +++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00lib.h | 51 +++++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 126 ++++--------------------
drivers/net/wireless/rt2x00/rt2x00pci.h | 12 --
drivers/net/wireless/rt2x00/rt2x00queue.c | 157 +++++++++++++++++++++++------
drivers/net/wireless/rt2x00/rt2x00queue.h | 35 ++++---
drivers/net/wireless/rt2x00/rt2x00usb.c | 94 +++---------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +
drivers/net/wireless/rt2x00/rt61pci.c | 23 +++--
drivers/net/wireless/rt2x00/rt73usb.c | 8 ++-
14 files changed, 368 insertions(+), 338 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
0 siblings, 1 reply; 66+ messages in thread
From: Ivo van Doorn @ 2008-07-18 18:43 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest update for rt2x00
I think all patches qualify for 2.6.27,
with the exception for first 2 patches:
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
but those are one-liners and have little impact.
The 3 patches from Iwo are the most important ones,
since that fixes a major bug in the beacon handling for the
USB drivers. The 3 patches are a bit big, but without them
beaconing simply won't work.
Ivo
---
The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
John W. Linville (1):
iwl-scan.c: fixup merge damage in wireless-testing#master
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ ..BRANCH.NOT.VERIFIED..
Ivo van Doorn (3):
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
rt2x00: Fix GCC warning because aifs is now unsigned
Iwo Mergler (3):
rt2x00: Support for large vendor requests
rt2x00: Large vendor requests for rt73usb firmware upload and beacons
rt2x00: Fix the beacon length bug
drivers/net/wireless/rt2x00/rt2500usb.c | 12 +++++++
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
drivers/net/wireless/rt2x00/rt2x00mac.c | 5 +--
drivers/net/wireless/rt2x00/rt2x00usb.c | 33 ++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 ++++++++++++-
drivers/net/wireless/rt2x00/rt73usb.c | 50 ++++++++++++------------------
7 files changed, 87 insertions(+), 44 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-07-18 18:43 Ivo van Doorn
@ 2008-07-19 13:55 ` Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-07-19 13:55 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Please wait with pulling from rt2x00.git,
updated patches are coming in a few moments,
I just noticed some cleanups which should be made
in several patches, and I'll incorporate the suggestion
from Johannes regarding the EIFS.
Sorry for the noise. ;)
Ivo
> Here is the latest update for rt2x00
>
> I think all patches qualify for 2.6.27,
> with the exception for first 2 patches:
> rt2x00: Remove duplicate declaration
> rt2x00: Fix EIFS timing value
> but those are one-liners and have little impact.
>
> The 3 patches from Iwo are the most important ones,
> since that fixes a major bug in the beacon handling for the
> USB drivers. The 3 patches are a bit big, but without them
> beaconing simply won't work.
>
> Ivo
>
> ---
> The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
> John W. Linville (1):
> iwl-scan.c: fixup merge damage in wireless-testing#master
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ ..BRANCH.NOT.VERIFIED..
>
> Ivo van Doorn (3):
> rt2x00: Remove duplicate declaration
> rt2x00: Fix EIFS timing value
> rt2x00: Fix GCC warning because aifs is now unsigned
>
> Iwo Mergler (3):
> rt2x00: Support for large vendor requests
> rt2x00: Large vendor requests for rt73usb firmware upload and beacons
> rt2x00: Fix the beacon length bug
>
> drivers/net/wireless/rt2x00/rt2500usb.c | 12 +++++++
> drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
> drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
> drivers/net/wireless/rt2x00/rt2x00mac.c | 5 +--
> drivers/net/wireless/rt2x00/rt2x00usb.c | 33 ++++++++++++++++++++
> drivers/net/wireless/rt2x00/rt2x00usb.h | 22 ++++++++++++-
> drivers/net/wireless/rt2x00/rt73usb.c | 50 ++++++++++++------------------
> 7 files changed, 87 insertions(+), 44 deletions(-)
>
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-07-19 14:15 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-07-19 14:15 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the updated patch series,
I have dropped the compile warning patch because Johannes has
already send it before, the EIFS patch has been updated to use the
correct definition instead of hardcoding the value, and some
coding style fixes went into Iwo's patches.
Patches are still intended for 2.6.27
Ivo
---
The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
John W. Linville (1):
iwl-scan.c: fixup merge damage in wireless-testing#master
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (2):
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
Iwo Mergler (3):
rt2x00: Support for large vendor requests
rt2x00: Large vendor requests for rt73usb firmware upload and beacons
rt2x00: Fix the beacon length bug
drivers/net/wireless/rt2x00/rt2500usb.c | 12 ++++++
drivers/net/wireless/rt2x00/rt2x00.h | 5 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
drivers/net/wireless/rt2x00/rt2x00usb.c | 32 +++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 +++++++++++-
drivers/net/wireless/rt2x00/rt73usb.c | 52 +++++++++++----------------
7 files changed, 90 insertions(+), 42 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-08-04 14:36 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-08-04 14:36 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Only 5 patches, but they do bump rt2x00 to a new version: 2.2.0
This series will add HW crypto support to rt2x00, by default it
has been enabled for rt61pci and rt73usb.
rt2500usb has also been created, but currently does not work
since it requires different handling then rt61pci and rt73usb. Because
I am focussing on different areas in rt2x00 now, it will take some
time before I get back to rt2500usb HW crypto (if there are any volunteers
to take a shot at rt2500usb HW crypto, they are welcome).
rt2500pci supports HW crypto as well, but I won't implement it due
to the way it has to be enabled. It comes down to the fact that during
TX the key has to be provided, and after the encryption an interupt will
be raised after which the frame can be kicked to the air. In the RX path
the same happens, including that after RX the key has to be provided
as well. This will cause the number of IRQ events to double during HW
crypto, and several changes are required in mac80211 to make it possible.
Because of that I see no point in doing anything with it.
Ivo
----
The following changes since commit 2471b779e2f93d76bd4c041e4a8f5a27c859d7ce:
John W. Linville (1):
Revert "mac80211: add direct probe before association"
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Implement HW encryption
rt2x00: Implement HW encryption (rt61pci)
rt2x00: Implement HW encryption (rt73usb)
rt2x00: Gather channel information in structure
rt2x00: Release rt2x00 2.2.0
drivers/net/wireless/rt2x00/Kconfig | 6 +
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 40 ++--
drivers/net/wireless/rt2x00/rt2400pci.h | 22 +--
drivers/net/wireless/rt2x00/rt2500pci.c | 39 +++--
drivers/net/wireless/rt2x00/rt2500pci.h | 17 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 39 +++--
drivers/net/wireless/rt2x00/rt2500usb.h | 17 +-
drivers/net/wireless/rt2x00/rt2x00.h | 64 +++++-
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +
drivers/net/wireless/rt2x00/rt2x00crypto.c | 215 +++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00debug.c | 97 +++++++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 48 +++--
drivers/net/wireless/rt2x00/rt2x00lib.h | 47 ++++
drivers/net/wireless/rt2x00/rt2x00mac.c | 110 +++++++++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 81 +++++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 73 ++++++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 19 ++-
drivers/net/wireless/rt2x00/rt61pci.c | 298 ++++++++++++++++++++++++--
drivers/net/wireless/rt2x00/rt61pci.h | 38 ++--
drivers/net/wireless/rt2x00/rt73usb.c | 314 +++++++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt73usb.h | 38 ++--
22 files changed, 1418 insertions(+), 209 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00crypto.c
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-08-29 19:03 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-08-29 19:03 UTC (permalink / raw)
To: John Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is another rt2x00 update for the 2.6.28 kernel,
I believe some patches have been send earlier, but
I lost my overview on my patches, so this bunch will
get rt2x00 completely up to date.
A few patches are needed for rt2800, but they are small,
and clean enough to be merged early.
Ivo
---
The following changes since commit b51f3c6077d59b41e3f9d2af33e2e2f94ecbbc39:
John W. Linville (1):
at76_usb: fix for removal of IEEE80211_TX_CTL_DO_NOT_ENCRYPT
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Fix race conditions in flag handling
rt2x00: Map extra_tx_headroom to DMA
rt2x00: Initialize txop during conf_tx() callback
rt2x00: Add Signal type flag
rt2x00: Release rt2x00 2.2.1
Mattias Nissler (2):
rt2x00: Only configure hardware when radio is enabled
rt2x00: skb->data pointer should not include TX descriptor
drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 7 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 17 +++---
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 68 +++++++++++--------------
drivers/net/wireless/rt2x00/rt2x00mac.c | 75 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt2x00queue.c | 31 +++++++++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 9 ++-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 21 ++++----
drivers/net/wireless/rt2x00/rt61pci.c | 73 ++++++++++++++++++++++-----
drivers/net/wireless/rt2x00/rt73usb.c | 74 ++++++++++++++++++++++-----
13 files changed, 253 insertions(+), 138 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-10-29 16:16 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-10-29 16:16 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Well over a month since my last rt2x00 patches, but finally a real rt2x00 update.
The first 2 patches are updates based on recent mac80211 changes,
especially the configuration patch is important.
I also noticed that the recent Kconfig fixes introduced a possibility of a build error,
not sure if it was reported by somebody yet, but in any case it was possible to
build mac80211 as module and rt2x00 compiled into the kernel, causing obvious
problems.
Ivo
---
The following changes since commit 43288a0fdd6b970dec3017ceaffb70cf6347e5f0:
John W. Linville (1):
ath5k: fixup warnings created by "ath5k: Reset key cache..."
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Optimize configuration handling
rt2x00: Remove ieee80211_bss_conf from rt2x00_intf
rt2x00: Improve interface_modes initialization
rt2x00: Fix build error when mac80211=M rt2x00=Y
rt2x00: Release rt2x00 2.2.2
drivers/net/wireless/rt2x00/Kconfig | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 167 ++++++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 206 ++++++++++++-------------
drivers/net/wireless/rt2x00/rt2500usb.c | 110 ++++++-------
drivers/net/wireless/rt2x00/rt2x00.h | 44 ++----
drivers/net/wireless/rt2x00/rt2x00config.c | 164 +++-----------------
drivers/net/wireless/rt2x00/rt2x00dev.c | 16 ++-
drivers/net/wireless/rt2x00/rt2x00lib.h | 3 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 12 +--
drivers/net/wireless/rt2x00/rt61pci.c | 231 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt73usb.c | 216 +++++++++++++-------------
11 files changed, 501 insertions(+), 670 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-12-02 17:19 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-12-02 17:19 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a new batch of updates for rt2x00.
The first patch (rt2x00: Optimize IV/EIV handling) was send individually
a few days ago, but it is probably easier if you pull it along with the rest
of the patches during this merge.
Small warning which might be important:
The patch "Implement HW encryption (rt2500usb)" adds support for HW crypto
but it does _not_ activate it. The module parameter "nohwcrypt" is set to 1
by default for now. This code has been sleeping in the rt2x00 experimental branch
for quite some time now, and doesn't work completely. I hope to debug this
further when I have time, but I am hoping that with the code in wireless-testing
other people will take a look at it to see what might be going wrong.
Ivo
---
The following changes since commit ca072018d6425a55b3f0e6d8bd3e6217ee509065:
Winkler, Tomas (1):
iwlwifi: TX update chicken bits
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Optimize IV/EIV handling
rt2x00: Store retry limit values
rt2x00: Remove duplicate code
rt2x00: Implement HW encryption (rt2500usb)
rt2x00: Release rt2x00 2.2.3
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/rt2500usb.c | 132 ++++++++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2500usb.h | 3 +
drivers/net/wireless/rt2x00/rt2x00.h | 9 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 39 +++++----
drivers/net/wireless/rt2x00/rt2x00crypto.c | 56 ++++++------
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 ++
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 -
drivers/net/wireless/rt2x00/rt2x00queue.c | 17 ++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 12 +--
drivers/net/wireless/rt2x00/rt61pci.c | 8 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 +-
12 files changed, 211 insertions(+), 82 deletions(-)
^ permalink raw reply [flat|nested] 66+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-12-20 9:52 Ivo van Doorn
0 siblings, 0 replies; 66+ messages in thread
From: Ivo van Doorn @ 2008-12-20 9:52 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest rt2x00 update.
Lots of new features, optimizations and cleanups.
Ivo
---
The following changes since commit 30b5741a6880688c4540c8f80f90371f42b05a63:
Winkler, Tomas (1):
iwl3945: use iwl_rb_status
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Andrey Yurovsky (1):
rt2x00: Add mesh support
Ivo van Doorn (14):
rt2x00: Implement Powersaving
rt2x00: Move link tuning into seperate file
rt2x00: Reduce calls to bbp_read()
rt2x00: Restrict interface between rt2x00link and drivers
rt2x00: Add RFKILL support to rt2500usb and rt73usb
rt2x00: Rename CONFIG_CRYPTO_COPY_IV
rt2x00: Implement WDS support
rt2x00: Split EEPROM_NIC_TX_RX_FIXED
rt2x00: Move code into seperate functions
rt2x00: Remove ENTRY_TXD_OFDM_RATE
rt2x00: Allow drivers to pass the noise value during rxdone
rt2x00: Introduce RXDONE_SIGNAL_MASK mask
rt2x00: Fix segementation fault
rt2x00: Release rt2x00 2.3.0
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 60 +++-
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++--
drivers/net/wireless/rt2x00/rt2500usb.c | 58 ++++-
drivers/net/wireless/rt2x00/rt2500usb.h | 8 +
drivers/net/wireless/rt2x00/rt2x00.h | 131 +++------
drivers/net/wireless/rt2x00/rt2x00config.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00crypto.c | 13 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 322 ++------------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 87 +++++-
drivers/net/wireless/rt2x00/rt2x00link.c | 461 ++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00mac.c | 42 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 193 ++++++------
drivers/net/wireless/rt2x00/rt2x00queue.h | 15 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 10 +
drivers/net/wireless/rt2x00/rt2x00usb.c | 6 +-
drivers/net/wireless/rt2x00/rt61pci.c | 144 +++++----
drivers/net/wireless/rt2x00/rt61pci.h | 7 +-
drivers/net/wireless/rt2x00/rt73usb.c | 134 ++++++---
drivers/net/wireless/rt2x00/rt73usb.h | 13 +
21 files changed, 1138 insertions(+), 666 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00link.c
^ permalink raw reply [flat|nested] 66+ messages in thread
end of thread, other threads:[~2008-12-20 10:01 UTC | newest]
Thread overview: 66+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-25 18:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-09-25 18:53 ` [PATCH 1/12] rt2x00: Correct error in calculating rssi for link tuner Ivo van Doorn
2007-09-25 18:53 ` [PATCH 2/12] rt2x00: Make *_beacon_update static Ivo van Doorn
2007-09-25 18:54 ` [PATCH 3/12] rt2x00: Increase rt2x00usb_vendor_request timeout Ivo van Doorn
2007-09-25 18:54 ` [PATCH 4/12] rt2x00: Correctly identify rt2561turbo Ivo van Doorn
2007-09-25 18:55 ` [PATCH 5/12] rt2x00: adapt to filter configuration API Ivo van Doorn
2007-09-25 18:55 ` [PATCH 6/12] rt2x00: Reorganize rt2x00dev->flags Ivo van Doorn
2007-09-25 18:56 ` [PATCH 7/12] rt2x00: Add rt2x00dev->flags to debugfs Ivo van Doorn
2007-09-25 18:56 ` [PATCH 8/12] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work Ivo van Doorn
2007-09-25 18:57 ` [PATCH 9/12] rt2x00: Stop link tuning when radio is down Ivo van Doorn
2007-09-25 18:57 ` [PATCH 10/12] rt2x00: Fix obvious typo in comment Ivo van Doorn
2007-09-25 18:57 ` [PATCH 11/12] rt2x00: Fix panic on rmmod with rfkill enabled Ivo van Doorn
2007-09-25 18:58 ` [PATCH 12/12] rt2x00: Release rt2x00 2.0.9 Ivo van Doorn
-- strict thread matches above, loose matches on Subject: below --
2008-12-20 9:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-12-02 17:19 Ivo van Doorn
2008-10-29 16:16 Ivo van Doorn
2008-08-29 19:03 Ivo van Doorn
2008-08-04 14:36 Ivo van Doorn
2008-07-19 14:15 Ivo van Doorn
2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
2008-06-16 17:58 Ivo van Doorn
2008-06-08 21:41 Ivo van Doorn
2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
2008-05-05 15:23 Ivo van Doorn
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
2008-03-09 21:37 Ivo van Doorn
2008-02-25 22:20 Ivo van Doorn
2008-02-17 16:30 Ivo van Doorn
2008-02-10 21:46 Ivo van Doorn
2008-02-03 14:41 Ivo van Doorn
2008-01-06 22:37 Ivo van Doorn
2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
2007-10-27 11:34 Ivo van Doorn
2007-10-13 14:27 Ivo van Doorn
2007-10-06 12:19 Ivo van Doorn
2007-09-16 12:17 Ivo van Doorn
2007-08-19 18:18 Ivo van Doorn
2007-08-02 15:45 Ivo van Doorn
2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
2007-07-25 20:49 Ivo van Doorn
2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
2007-06-19 18:18 Ivo van Doorn
2007-06-03 12:25 Ivo van Doorn
2007-05-07 14:44 Ivo van Doorn
2007-04-28 20:45 Ivo van Doorn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).