From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, rt2400-devel@lists.sourceforge.net
Subject: [PATCH 11/16] rt2x00: Pass dev_state to rt2x00lib_toggle_rx
Date: Sat, 6 Oct 2007 14:16:09 +0200 [thread overview]
Message-ID: <200710061416.10268.IvDoorn@gmail.com> (raw)
In-Reply-To: <200710061410.31765.IvDoorn@gmail.com>
Directly pass a value from the enum dev_state with rt2x00lib_toggle_rx,
this will save us a ? : statement, and it is clearer then passing a 1 0
argument.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 13 ++++++-------
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 4 ++--
3 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6dc4f63..e141048 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -120,7 +120,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Enable RX.
*/
- rt2x00lib_toggle_rx(rt2x00dev, 1);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
/*
* Start the TX queues.
@@ -151,7 +151,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Disable RX.
*/
- rt2x00lib_toggle_rx(rt2x00dev, 0);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
/*
* Disable radio.
@@ -159,14 +159,12 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
}
-void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
+void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
{
- enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF;
-
/*
* When we are disabling the RX, we should also stop the link tuner.
*/
- if (!enable)
+ if (state == STATE_RADIO_RX_OFF)
rt2x00lib_stop_link_tuner(rt2x00dev);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
@@ -174,7 +172,8 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
/*
* When we are enabling the RX, we should also start the link tuner.
*/
- if (enable && is_interface_present(&rt2x00dev->interface))
+ if (state == STATE_RADIO_RX_ON &&
+ is_interface_present(&rt2x00dev->interface))
rt2x00lib_start_link_tuner(rt2x00dev);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 29ca932..298faa9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -38,7 +38,7 @@
*/
int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
-void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable);
+void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state);
void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index e98d013..f519d73 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -272,7 +272,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
if (!conf->radio_enabled)
rt2x00lib_disable_radio(rt2x00dev);
else
- rt2x00lib_toggle_rx(rt2x00dev, 0);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
}
rt2x00lib_config(rt2x00dev, conf, 0);
@@ -281,7 +281,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
* Reenable RX only if the radio should be on.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00lib_toggle_rx(rt2x00dev, 1);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
else if (conf->radio_enabled)
return rt2x00lib_enable_radio(rt2x00dev);
--
1.5.3.4
next prev parent reply other threads:[~2007-10-06 12:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200710061410.31765.IvDoorn@gmail.com>
2007-10-06 12:11 ` [PATCH 01/16] rt2x00: Remove duplicate code in MAC & BSSID handling Ivo van Doorn
2007-10-06 12:12 ` [PATCH 02/16] rt2x00: Remove radio check from rt2x00lib_toggle_rx Ivo van Doorn
2007-10-06 12:12 ` [PATCH 03/16] rt2x00: Store "STARTED" state during suspend Ivo van Doorn
2007-10-06 12:13 ` [PATCH 04/16] rt2x00: Move rt2x00dev flags into enumeration Ivo van Doorn
2007-10-06 12:13 ` [PATCH 05/16] rt2x00: Don't use changed_flags inside configure_packet_filter Ivo van Doorn
2007-10-06 12:14 ` [PATCH 06/16] rt2x00: Fix rfkill handling Ivo van Doorn
2007-10-06 12:14 ` [PATCH 07/16] rt2x00: Move TSF sync values into rt2x00config Ivo van Doorn
2007-10-06 12:14 ` [PATCH 08/16] rt2x00: get_duration expects values in 100kbs Ivo van Doorn
2007-10-06 12:15 ` [PATCH 09/16] rt2x00: Cut lines down to 80 characters Ivo van Doorn
2007-10-06 12:15 ` [PATCH 10/16] rt2x00: Add get_tx_data_len callback function Ivo van Doorn
2007-10-06 12:16 ` Ivo van Doorn [this message]
2007-10-06 12:16 ` [PATCH 12/16] rt2x00: Small optimizations Ivo van Doorn
2007-10-06 12:17 ` [PATCH 13/16] rt2x00: Reorganize configuration handler Ivo van Doorn
2007-10-06 12:18 ` [PATCH 14/16] rt2x00: Clean disabling of rt73usb_get_tsf Ivo van Doorn
2007-10-06 12:18 ` [PATCH 15/16] rt2x00: Allways memset memory obtained from skb_push() Ivo van Doorn
2007-10-06 12:18 ` [PATCH 16/16] rt2x00: Release 2.0.10 Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710061416.10268.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).