From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: rt2400-devel@lists.sourceforge.net, linux-wireless@vger.kernel.org
Subject: [PATCH 4/21] rt2x00: SW diversity should default to antenna B
Date: Sat, 27 Oct 2007 13:36:56 +0200 [thread overview]
Message-ID: <200710271336.56387.IvDoorn@gmail.com> (raw)
In-Reply-To: <200710271334.34192.IvDoorn@gmail.com>
Although ANTENNA_SW_DIVERSITY should never be send
to the driver, we should still handle it to prevent bugs.
But instead of defaulting to ANTENNA_HW_DIVERSITY we
should default to ANTENNA_B instead.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 16 ++++++++++++++--
drivers/net/wireless/rt2x00/rt2500pci.c | 26 ++++++++++++++++----------
drivers/net/wireless/rt2x00/rt2500usb.c | 16 ++++++++++++++--
drivers/net/wireless/rt2x00/rt61pci.c | 16 ++++++++++++++--
drivers/net/wireless/rt2x00/rt73usb.c | 16 ++++++++++++++--
5 files changed, 72 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 2284cb3..5b3adba 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -409,13 +409,19 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the TX antenna.
*/
switch (ant->tx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1);
break;
case ANTENNA_A:
rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2);
break;
@@ -425,13 +431,19 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the RX antenna.
*/
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a004cd9..b6d7462 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -438,17 +438,19 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the TX antenna.
*/
switch (ant->tx) {
- case ANTENNA_SW_DIVERSITY:
- case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
- rt2x00_set_field32(®, BBPCSR1_CCK, 2);
- rt2x00_set_field32(®, BBPCSR1_OFDM, 2);
- break;
case ANTENNA_A:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
rt2x00_set_field32(®, BBPCSR1_CCK, 0);
rt2x00_set_field32(®, BBPCSR1_OFDM, 0);
break;
+ case ANTENNA_HW_DIVERSITY:
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
rt2x00_set_field32(®, BBPCSR1_CCK, 2);
@@ -460,13 +462,17 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the RX antenna.
*/
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
- case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
- break;
case ANTENNA_A:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
break;
+ case ANTENNA_HW_DIVERSITY:
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4b92f10..02f1731 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -401,7 +401,6 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the TX antenna.
*/
switch (ant->tx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
@@ -412,6 +411,13 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
@@ -423,13 +429,19 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
* Configure the RX antenna.
*/
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
break;
case ANTENNA_A:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
break;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f96a77c..86fa07a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -425,7 +425,6 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
!rt2x00_rf(&rt2x00dev->chip, RF5225));
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
@@ -440,6 +439,13 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
else
rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
@@ -473,7 +479,6 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
break;
@@ -481,6 +486,13 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index a1d915f..07224c0 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -409,7 +409,6 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
@@ -424,6 +423,13 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
else
rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
@@ -456,7 +462,6 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
switch (ant->rx) {
- case ANTENNA_SW_DIVERSITY:
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
break;
@@ -464,6 +469,13 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
break;
+ case ANTENNA_SW_DIVERSITY:
+ /*
+ * NOTE: We should never come here because rt2x00lib is
+ * supposed to catch this and send us the correct antenna
+ * explicitely. However we are nog going to bug about this.
+ * Instead, just default to antenna B.
+ */
case ANTENNA_B:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
--
1.5.3.4
next prev parent reply other threads:[~2007-10-27 11:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-27 11:34 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-10-27 11:35 ` [PATCH 1/21] rt2x00: Move quality statistics into seperate structure Ivo van Doorn
2007-10-27 11:35 ` [PATCH 2/21] rt2x00: Use enum defines Ivo van Doorn
2007-10-27 11:36 ` [PATCH 3/21] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 Ivo van Doorn
2007-10-27 11:36 ` Ivo van Doorn [this message]
2007-10-27 11:37 ` [PATCH 5/21] rt2x00: Remove rt2x00_clear_link Ivo van Doorn
2007-10-27 11:37 ` [PATCH 6/21] rt2x00: Implement SW diversity Ivo van Doorn
2007-10-27 11:38 ` [PATCH 7/21] rt2x00: Cleanup if-statements Ivo van Doorn
2007-10-27 11:38 ` [PATCH 8/21] rt2x00: Fix antenna selection Ivo van Doorn
2007-10-27 11:39 ` [PATCH 9/21] rt2x00: Release rt2x00 2.0.11 Ivo van Doorn
2007-10-27 11:39 ` [PATCH 10/21] rt2x00: Disable RX when switching antenna Ivo van Doorn
2007-10-27 11:39 ` [PATCH 11/21] rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna Ivo van Doorn
2007-10-27 11:40 ` [PATCH 12/21] rt2x00: Input-polldev requires input device Ivo van Doorn
2007-10-27 11:40 ` [PATCH 13/21] rt2x00: Detect initial rfkill state on register Ivo van Doorn
2007-10-27 11:41 ` [PATCH 14/21] rt2x00: Unconstify rt2x00dev Ivo van Doorn
2007-10-27 11:41 ` [PATCH 15/21] rt2x00: Rework rt61 antenna selection Ivo van Doorn
2007-10-27 11:42 ` [PATCH 16/21] rt2x00: Remove unused variables Ivo van Doorn
2007-10-27 11:42 ` [PATCH 17/21] rt2x00: Rework rt73 antenna selection Ivo van Doorn
2007-10-27 11:43 ` [PATCH 18/21] rt2x00: Remove data_desc structure Ivo van Doorn
2007-10-27 11:43 ` [PATCH 19/21] rt2x00: Place mutex around USB register access Ivo van Doorn
2007-10-27 11:43 ` [PATCH 20/21] rt2x00: Correctly set ACK bit in tx descriptors Ivo van Doorn
2007-10-27 11:44 ` [PATCH 21/21] rt2x00: Release rt2x00 2.0.12 Ivo van Doorn
2007-10-27 12:47 ` [Rt2400-devel] Please pull 'upstream' branch of rt2x00 John W. Linville
2007-10-27 14:45 ` Ivo van Doorn
2007-10-27 16:19 ` Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710271336.56387.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).