From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: rt2400-devel@lists.sourceforge.net, linux-wireless@vger.kernel.org
Subject: [PATCH 17/21] rt2x00: Rework rt73 antenna selection
Date: Sat, 27 Oct 2007 13:42:37 +0200 [thread overview]
Message-ID: <200710271342.37504.IvDoorn@gmail.com> (raw)
In-Reply-To: <200710271334.34192.IvDoorn@gmail.com>
From: Mattias Nissler <mattias.nissler@gmx.de>
This patch changes rt73 antenna selection to what I believe is the correct way.
It also fixes a small selection bug that switched the antennas by accident.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt73usb.c | 78 ++++++++++----------------------
drivers/net/wireless/rt2x00/rt73usb.h | 10 +++-
2 files changed, 33 insertions(+), 55 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 57fa18d..1c44081 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -399,6 +399,7 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
u8 r3;
u8 r4;
u8 r77;
+ u8 temp;
rt73usb_bbp_read(rt2x00dev, 3, &r3);
rt73usb_bbp_read(rt2x00dev, 4, &r4);
@@ -407,37 +408,22 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
/*
- * Configure the TX antenna.
- */
- switch (ant->tx) {
- case ANTENNA_A:
- rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0);
- break;
- case ANTENNA_SW_DIVERSITY:
- case ANTENNA_HW_DIVERSITY:
- /*
- * NOTE: We should never come here because rt2x00lib is
- * supposed to catch this and send us the correct antenna
- * explicitely. However we are nog going to bug about this.
- * Instead, just default to antenna B.
- */
- case ANTENNA_B:
- rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3);
- break;
- }
-
- /*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
- rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- (rt2x00dev->curr_hwmode != HWMODE_A));
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
+ temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
+ && (rt2x00dev->curr_hwmode != HWMODE_A);
+ rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
break;
case ANTENNA_A:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
+ if (rt2x00dev->curr_hwmode == HWMODE_A)
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
+ else
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
break;
case ANTENNA_SW_DIVERSITY:
/*
@@ -447,8 +433,12 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
* Instead, just default to antenna B.
*/
case ANTENNA_B:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
+ if (rt2x00dev->curr_hwmode == HWMODE_A)
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
+ else
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
break;
}
@@ -473,34 +463,15 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
/*
- * Configure the TX antenna.
- */
- switch (ant->tx) {
- case ANTENNA_A:
- rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0);
- break;
- case ANTENNA_SW_DIVERSITY:
- case ANTENNA_HW_DIVERSITY:
- /*
- * NOTE: We should never come here because rt2x00lib is
- * supposed to catch this and send us the correct antenna
- * explicitely. However we are nog going to bug about this.
- * Instead, just default to antenna B.
- */
- case ANTENNA_B:
- rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3);
- break;
- }
-
- /*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
break;
case ANTENNA_A:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
break;
case ANTENNA_SW_DIVERSITY:
/*
@@ -510,7 +481,8 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
* Instead, just default to antenna B.
*/
case ANTENNA_B:
- rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+ rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
+ rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
break;
}
@@ -558,8 +530,6 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
unsigned int i;
u32 reg;
- rt73usb_register_read(rt2x00dev, PHY_CSR0, ®);
-
if (rt2x00dev->curr_hwmode == HWMODE_A) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
@@ -568,15 +538,17 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
}
+ for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
+ rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
+
+ rt73usb_register_read(rt2x00dev, PHY_CSR0, ®);
+
rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
(rt2x00dev->curr_hwmode == HWMODE_B ||
rt2x00dev->curr_hwmode == HWMODE_G));
rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
(rt2x00dev->curr_hwmode == HWMODE_A));
- for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
- rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
-
rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 13f479c..b967df2 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -713,13 +713,19 @@ struct hw_pairwise_ta_entry {
* R4: RX antenna control
* FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
*/
-#define BBP_R4_RX_ANTENNA FIELD8(0x03)
+
+/*
+ * ANTENNA_CONTROL semantics (guessed):
+ * 0x1: Software controlled antenna switching (fixed or SW diversity)
+ * 0x2: Hardware diversity.
+ */
+#define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
#define BBP_R4_RX_FRAME_END FIELD8(0x20)
/*
* R77
*/
-#define BBP_R77_TX_ANTENNA FIELD8(0x03)
+#define BBP_R77_RX_ANTENNA FIELD8(0x03)
/*
* RF registers
--
1.5.3.4
next prev parent reply other threads:[~2007-10-27 11:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-27 11:34 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-10-27 11:35 ` [PATCH 1/21] rt2x00: Move quality statistics into seperate structure Ivo van Doorn
2007-10-27 11:35 ` [PATCH 2/21] rt2x00: Use enum defines Ivo van Doorn
2007-10-27 11:36 ` [PATCH 3/21] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 Ivo van Doorn
2007-10-27 11:36 ` [PATCH 4/21] rt2x00: SW diversity should default to antenna B Ivo van Doorn
2007-10-27 11:37 ` [PATCH 5/21] rt2x00: Remove rt2x00_clear_link Ivo van Doorn
2007-10-27 11:37 ` [PATCH 6/21] rt2x00: Implement SW diversity Ivo van Doorn
2007-10-27 11:38 ` [PATCH 7/21] rt2x00: Cleanup if-statements Ivo van Doorn
2007-10-27 11:38 ` [PATCH 8/21] rt2x00: Fix antenna selection Ivo van Doorn
2007-10-27 11:39 ` [PATCH 9/21] rt2x00: Release rt2x00 2.0.11 Ivo van Doorn
2007-10-27 11:39 ` [PATCH 10/21] rt2x00: Disable RX when switching antenna Ivo van Doorn
2007-10-27 11:39 ` [PATCH 11/21] rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna Ivo van Doorn
2007-10-27 11:40 ` [PATCH 12/21] rt2x00: Input-polldev requires input device Ivo van Doorn
2007-10-27 11:40 ` [PATCH 13/21] rt2x00: Detect initial rfkill state on register Ivo van Doorn
2007-10-27 11:41 ` [PATCH 14/21] rt2x00: Unconstify rt2x00dev Ivo van Doorn
2007-10-27 11:41 ` [PATCH 15/21] rt2x00: Rework rt61 antenna selection Ivo van Doorn
2007-10-27 11:42 ` [PATCH 16/21] rt2x00: Remove unused variables Ivo van Doorn
2007-10-27 11:42 ` Ivo van Doorn [this message]
2007-10-27 11:43 ` [PATCH 18/21] rt2x00: Remove data_desc structure Ivo van Doorn
2007-10-27 11:43 ` [PATCH 19/21] rt2x00: Place mutex around USB register access Ivo van Doorn
2007-10-27 11:43 ` [PATCH 20/21] rt2x00: Correctly set ACK bit in tx descriptors Ivo van Doorn
2007-10-27 11:44 ` [PATCH 21/21] rt2x00: Release rt2x00 2.0.12 Ivo van Doorn
2007-10-27 12:47 ` [Rt2400-devel] Please pull 'upstream' branch of rt2x00 John W. Linville
2007-10-27 14:45 ` Ivo van Doorn
2007-10-27 16:19 ` Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710271342.37504.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).