From: Michael Buesch <mb@bu3sch.de>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, bcm43xx-dev@lists.berlios.de
Subject: [PATCH] b43: Rewrite and fix rfkill init
Date: Sat, 3 Nov 2007 14:34:32 +0100 [thread overview]
Message-ID: <200711031434.32541.mb@bu3sch.de> (raw)
The rfkill subsystem doesn't like code like that
rfkill_allocate();
rfkill_register();
rfkill_unregister();
rfkill_register(); /* <- This will crash */
This sequence happens with
modprobe b43
ifconfig wlanX up
ifconfig wlanX down
ifconfig wlanX up
Fix this by always re-allocating the rfkill stuff before register.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
---
Note that this has to be ported to b43legacy.
Some volunteers? :)
Index: wireless-2.6/drivers/net/wireless/b43/main.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43/main.c 2007-11-03 14:19:21.000000000 +0100
+++ wireless-2.6/drivers/net/wireless/b43/main.c 2007-11-03 14:26:39.000000000 +0100
@@ -3686,7 +3686,6 @@ static int b43_setup_modes(struct b43_wl
static void b43_wireless_core_detach(struct b43_wldev *dev)
{
- b43_rfkill_free(dev);
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43_release_firmware(dev);
@@ -3772,7 +3771,6 @@ static int b43_wireless_core_attach(stru
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43_chip_reset);
- b43_rfkill_alloc(dev);
b43_radio_turn_off(dev, 1);
b43_switch_analog(dev, 0);
Index: wireless-2.6/drivers/net/wireless/b43/rfkill.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43/rfkill.c 2007-11-02 20:16:14.000000000 +0100
+++ wireless-2.6/drivers/net/wireless/b43/rfkill.c 2007-11-03 14:19:38.000000000 +0100
@@ -47,18 +47,21 @@ static void b43_rfkill_poll(struct input
struct b43_wldev *dev = poll_dev->private;
struct b43_wl *wl = dev->wl;
bool enabled;
+ bool report_change = 0;
mutex_lock(&wl->mutex);
B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
enabled = b43_is_hw_radio_enabled(dev);
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
+ report_change = 1;
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
- mutex_unlock(&wl->mutex);
+ }
+ mutex_unlock(&wl->mutex);
+
+ if (unlikely(report_change))
input_report_key(poll_dev->input, KEY_WLAN, enabled);
- } else
- mutex_unlock(&wl->mutex);
}
/* Called when the RFKILL toggled in software. */
@@ -68,18 +71,11 @@ static int b43_rfkill_soft_toggle(void *
struct b43_wl *wl = dev->wl;
int err = 0;
- /* When RFKILL is registered, it will call back into this callback.
- * wl->mutex will already be locked when this happens.
- * So first trylock. On contention check if we are in initialization.
- * Silently return if that happens to avoid a deadlock. */
- if (mutex_trylock(&wl->mutex) == 0) {
- if (b43_status(dev) < B43_STAT_INITIALIZED)
- return 0;
- mutex_lock(&wl->mutex);
- }
- if (b43_status(dev) < B43_STAT_INITIALIZED)
- goto out_unlock;
+ if (!wl->rfkill.registered)
+ return 0;
+ mutex_lock(&wl->mutex);
+ B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
switch (state) {
case RFKILL_STATE_ON:
if (!dev->radio_hw_enable) {
@@ -104,11 +100,11 @@ out_unlock:
char * b43_rfkill_led_name(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
+ struct b43_rfkill *rfk = &(dev->wl->rfkill);
- if (!wl->rfkill.rfkill)
+ if (!rfk->registered)
return NULL;
- return rfkill_get_led_name(wl->rfkill.rfkill);
+ return rfkill_get_led_name(rfk->rfkill);
}
void b43_rfkill_init(struct b43_wldev *dev)
@@ -117,53 +113,13 @@ void b43_rfkill_init(struct b43_wldev *d
struct b43_rfkill *rfk = &(wl->rfkill);
int err;
- if (rfk->rfkill) {
- err = rfkill_register(rfk->rfkill);
- if (err) {
- b43warn(wl, "Failed to register RF-kill button\n");
- goto err_free_rfk;
- }
- }
- if (rfk->poll_dev) {
- err = input_register_polled_device(rfk->poll_dev);
- if (err) {
- b43warn(wl, "Failed to register RF-kill polldev\n");
- goto err_free_polldev;
- }
- }
-
- return;
-err_free_rfk:
- rfkill_free(rfk->rfkill);
- rfk->rfkill = NULL;
-err_free_polldev:
- input_free_polled_device(rfk->poll_dev);
- rfk->poll_dev = NULL;
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (rfk->poll_dev)
- input_unregister_polled_device(rfk->poll_dev);
- if (rfk->rfkill)
- rfkill_unregister(rfk->rfkill);
-}
-
-void b43_rfkill_alloc(struct b43_wldev *dev)
-{
- struct b43_wl *wl = dev->wl;
- struct b43_rfkill *rfk = &(wl->rfkill);
+ rfk->registered = 0;
+ rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
+ if (!rfk->rfkill)
+ goto out_error;
snprintf(rfk->name, sizeof(rfk->name),
"b43-%s", wiphy_name(wl->hw->wiphy));
-
- rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
- if (!rfk->rfkill) {
- b43warn(wl, "Failed to allocate RF-kill button\n");
- return;
- }
rfk->rfkill->name = rfk->name;
rfk->rfkill->state = RFKILL_STATE_ON;
rfk->rfkill->data = dev;
@@ -171,18 +127,45 @@ void b43_rfkill_alloc(struct b43_wldev *
rfk->rfkill->user_claim_unsupported = 1;
rfk->poll_dev = input_allocate_polled_device();
- if (rfk->poll_dev) {
- rfk->poll_dev->private = dev;
- rfk->poll_dev->poll = b43_rfkill_poll;
- rfk->poll_dev->poll_interval = 1000; /* msecs */
- } else
- b43warn(wl, "Failed to allocate RF-kill polldev\n");
+ if (!rfk->poll_dev)
+ goto err_free_rfk;
+ rfk->poll_dev->private = dev;
+ rfk->poll_dev->poll = b43_rfkill_poll;
+ rfk->poll_dev->poll_interval = 1000; /* msecs */
+
+ err = rfkill_register(rfk->rfkill);
+ if (err)
+ goto err_free_polldev;
+ err = input_register_polled_device(rfk->poll_dev);
+ if (err)
+ goto err_unreg_rfk;
+
+ rfk->registered = 1;
+
+ return;
+err_unreg_rfk:
+ rfkill_unregister(rfk->rfkill);
+err_free_polldev:
+ input_free_polled_device(rfk->poll_dev);
+ rfk->poll_dev = NULL;
+err_free_rfk:
+ rfkill_free(rfk->rfkill);
+ rfk->rfkill = NULL;
+out_error:
+ rfk->registered = 0;
+ b43warn(wl, "RF-kill button init failed\n");
}
-void b43_rfkill_free(struct b43_wldev *dev)
+void b43_rfkill_exit(struct b43_wldev *dev)
{
struct b43_rfkill *rfk = &(dev->wl->rfkill);
+ if (!rfk->registered)
+ return;
+ rfk->registered = 0;
+
+ input_unregister_polled_device(rfk->poll_dev);
+ rfkill_unregister(rfk->rfkill);
input_free_polled_device(rfk->poll_dev);
rfk->poll_dev = NULL;
rfkill_free(rfk->rfkill);
Index: wireless-2.6/drivers/net/wireless/b43/rfkill.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43/rfkill.h 2007-10-27 13:28:16.000000000 +0200
+++ wireless-2.6/drivers/net/wireless/b43/rfkill.h 2007-11-03 14:19:38.000000000 +0100
@@ -15,14 +15,14 @@ struct b43_rfkill {
struct rfkill *rfkill;
/* The poll device for the RFKILL input button */
struct input_polled_dev *poll_dev;
+ /* Did initialization succeed? Used for freeing. */
+ bool registered;
/* The unique name of this rfkill switch */
- char name[32];
+ char name[sizeof("b43-phy4294967295")];
};
-/* All the init functions return void, because we are not interested
+/* The init function returns void, because we are not interested
* in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_alloc(struct b43_wldev *dev);
-void b43_rfkill_free(struct b43_wldev *dev);
void b43_rfkill_init(struct b43_wldev *dev);
void b43_rfkill_exit(struct b43_wldev *dev);
@@ -36,12 +36,6 @@ struct b43_rfkill {
/* empty */
};
-static inline void b43_rfkill_alloc(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_free(struct b43_wldev *dev)
-{
-}
static inline void b43_rfkill_init(struct b43_wldev *dev)
{
}
reply other threads:[~2007-11-03 13:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200711031434.32541.mb@bu3sch.de \
--to=mb@bu3sch.de \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).