From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: Michael Wu <flamingice@sourmilk.net>, linux-wireless@vger.kernel.org
Subject: [PATCH 7/9] mac80211: implement cfg80211s station handling
Date: Wed, 19 Dec 2007 02:03:35 +0100 [thread overview]
Message-ID: <20071219010342.459856000@sipsolutions.net> (raw)
In-Reply-To: 20071219010328.762470000@sipsolutions.net
This implements station handling from userspace via cfg80211
in mac80211.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/cfg.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 192 insertions(+)
--- everything.orig/net/mac80211/cfg.c 2007-12-19 00:50:19.363027235 +0100
+++ everything/net/mac80211/cfg.c 2007-12-19 00:50:23.043022894 +0100
@@ -14,6 +14,7 @@
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "cfg.h"
+#include "ieee80211_rate.h"
static enum ieee80211_if_types
nl80211_type_to_mac80211_type(enum nl80211_iftype type)
@@ -422,6 +423,194 @@ static int ieee80211_del_beacon(struct w
return ieee80211_if_config_beacon(dev);
}
+/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
+struct iapp_layer2_update {
+ u8 da[ETH_ALEN]; /* broadcast */
+ u8 sa[ETH_ALEN]; /* STA addr */
+ __be16 len; /* 6 */
+ u8 dsap; /* 0 */
+ u8 ssap; /* 0 */
+ u8 control;
+ u8 xid_info[3];
+} __attribute__ ((packed));
+
+static void ieee80211_send_layer2_update(struct sta_info *sta)
+{
+ struct iapp_layer2_update *msg;
+ struct sk_buff *skb;
+
+ /* Send Level 2 Update Frame to update forwarding tables in layer 2
+ * bridge devices */
+
+ skb = dev_alloc_skb(sizeof(*msg));
+ if (!skb)
+ return;
+ msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg));
+
+ /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID)
+ * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */
+
+ memset(msg->da, 0xff, ETH_ALEN);
+ memcpy(msg->sa, sta->addr, ETH_ALEN);
+ msg->len = htons(6);
+ msg->dsap = 0;
+ msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */
+ msg->control = 0xaf; /* XID response lsb.1111F101.
+ * F=0 (no poll command; unsolicited frame) */
+ msg->xid_info[0] = 0x81; /* XID format identifier */
+ msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */
+ msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */
+
+ skb->dev = sta->dev;
+ skb->protocol = eth_type_trans(skb, sta->dev);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ netif_rx(skb);
+}
+
+static void sta_apply_parameters(struct ieee80211_local *local,
+ struct sta_info *sta,
+ struct station_parameters *params)
+{
+ u32 rates;
+ int i, j;
+ struct ieee80211_hw_mode *mode;
+
+ if (params->station_flags & STATION_FLAG_CHANGED) {
+ sta->flags &= ~WLAN_STA_AUTHORIZED;
+ if (params->station_flags & STATION_FLAG_AUTHORIZED)
+ sta->flags |= WLAN_STA_AUTHORIZED;
+
+ sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
+ if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE)
+ sta->flags |= WLAN_STA_SHORT_PREAMBLE;
+
+ sta->flags &= ~WLAN_STA_WME;
+ if (params->station_flags & STATION_FLAG_WME)
+ sta->flags |= WLAN_STA_WME;
+ }
+
+ if (params->aid) {
+ sta->aid = params->aid;
+ if (sta->aid > IEEE80211_MAX_AID)
+ sta->aid = 0; /* XXX: should this be an error? */
+ }
+
+ if (params->listen_interval >= 0)
+ sta->listen_interval = params->listen_interval;
+
+ if (params->supported_rates) {
+ rates = 0;
+ mode = local->oper_hw_mode;
+ for (i = 0; i < params->supported_rates_len; i++) {
+ int rate = (params->supported_rates[i] & 0x7f) * 5;
+ for (j = 0; j < mode->num_rates; j++) {
+ if (mode->rates[j].rate == rate)
+ rates |= BIT(j);
+ }
+ }
+ sta->supp_rates = rates;
+ }
+}
+
+static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac, struct station_parameters *params)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *sdata;
+
+ /* Prevent a race with changing the rate control algorithm */
+ if (!netif_running(dev))
+ return -ENETDOWN;
+
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (sta) {
+ sta_info_put(sta);
+ return -EEXIST;
+ }
+
+ if (params->vlan) {
+ sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ sdata->vif.type != IEEE80211_IF_TYPE_AP)
+ return -EINVAL;
+ } else
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ sta = sta_info_add(local, dev, mac, GFP_KERNEL);
+ if (!sta)
+ return -ENOMEM;
+
+ sta->dev = sdata->dev;
+ if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN ||
+ sdata->vif.type == IEEE80211_IF_TYPE_AP)
+ ieee80211_send_layer2_update(sta);
+
+ sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
+
+ sta_apply_parameters(local, sta, params);
+
+ rate_control_rate_init(sta, local);
+
+ sta_info_put(sta);
+
+ return 0;
+}
+
+static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+
+ if (mac) {
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (!sta)
+ return -ENOENT;
+
+ sta_info_free(sta);
+ sta_info_put(sta);
+ } else
+ sta_info_flush(local, dev);
+
+ return 0;
+}
+
+static int ieee80211_change_station(struct wiphy *wiphy,
+ struct net_device *dev,
+ u8 *mac,
+ struct station_parameters *params)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *vlansdata;
+
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (!sta)
+ return -ENOENT;
+
+ if (params->vlan && params->vlan != sta->dev) {
+ vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ vlansdata->vif.type != IEEE80211_IF_TYPE_AP)
+ return -EINVAL;
+
+ sta->dev = params->vlan;
+ ieee80211_send_layer2_update(sta);
+ }
+
+ sta_apply_parameters(local, sta, params);
+
+ sta_info_put(sta);
+
+ return 0;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -433,4 +622,7 @@ struct cfg80211_ops mac80211_config_ops
.add_beacon = ieee80211_add_beacon,
.set_beacon = ieee80211_set_beacon,
.del_beacon = ieee80211_del_beacon,
+ .add_station = ieee80211_add_station,
+ .del_station = ieee80211_del_station,
+ .change_station = ieee80211_change_station,
};
--
next prev parent reply other threads:[~2007-12-19 15:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-19 1:03 [PATCH 0/9] nl80211/cfg80211/mac80211 updates for AP mode Johannes Berg
2007-12-19 1:03 ` [PATCH 1/9] cfg80211/nl80211: introduce key handling Johannes Berg
2007-12-19 1:03 ` [PATCH 2/9] mac80211: support adding/removing keys via cfg80211 Johannes Berg
2007-12-19 1:03 ` [PATCH 3/9] mac80211: support getting key sequence counters " Johannes Berg
2007-12-19 1:03 ` [PATCH 4/9] cfg80211/nl80211: add beacon settings Johannes Berg
2007-12-19 1:03 ` [PATCH 5/9] mac80211: add beacon configuration via cfg80211 Johannes Berg
2007-12-19 1:03 ` [PATCH 6/9] cfg80211/nl80211: station handling Johannes Berg
2007-12-19 1:03 ` Johannes Berg [this message]
2007-12-19 1:03 ` [PATCH 8/9] cfg80211/nl80211: implement station attribute retrieval Johannes Berg
2007-12-19 1:03 ` [PATCH 9/9] mac80211: implement station stats retrieval Johannes Berg
-- strict thread matches above, loose matches on Subject: below --
2007-10-25 9:36 [patch 0/9] initial round of hostapd support patches Johannes Berg
2007-10-25 9:36 ` [patch 7/9] mac80211: implement cfg80211s station handling Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071219010342.459856000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=flamingice@sourmilk.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).