[PATCH] rt2x00: Fix queue_idx initialization

[Ivo van Doorn <ivdoorn@gmail.com>]

For TX rings the queue_idx should start at
IEEE80211_TX_QUEUE_DATA0 and for each followup
ring this index needs to be increased.

For the RX ring the queue_idx should be set
to 0. We don't need to initialize the tx_params.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
John, this too is a followup on rt2x00 2.0.14.
This fixes rt61pci, after this patch it can associate and
succesfully transfer data again. :)

 drivers/net/wireless/rt2x00/rt2x00dev.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index fe98776..f09ad32 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1282,11 +1282,16 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
 
 	/*
 	 * Initialize ring parameters.
-	 * cw_min: 2^5 = 32.
-	 * cw_max: 2^10 = 1024.
+	 * RX: queue_idx = 0
+	 * TX: queue_idx = IEEE80211_TX_QUEUE_DATA0 + index
+	 * TX: cw_min: 2^5 = 32.
+	 * TX: cw_max: 2^10 = 1024.
 	 */
-	index = 0;
-	ring_for_each(rt2x00dev, ring) {
+	rt2x00dev->rx->rt2x00dev = rt2x00dev;
+	rt2x00dev->rx->queue_idx = 0;
+
+	index = IEEE80211_TX_QUEUE_DATA0;
+	txring_for_each(rt2x00dev, ring) {
 		ring->rt2x00dev = rt2x00dev;
 		ring->queue_idx = index++;
 		ring->tx_params.aifs = 2;
-- 
1.5.3.7