* [PATCH] wireless: rt2x00: fix driver menu indenting [not found] <200802091623.06504.m.bueker@berlin.de> @ 2008-02-10 18:52 ` Randy Dunlap 2008-02-10 19:03 ` [Rt2400-devel] " Ivo van Doorn 0 siblings, 1 reply; 4+ messages in thread From: Randy Dunlap @ 2008-02-10 18:52 UTC (permalink / raw) To: linux-wireless, rt2400-devel Cc: linux-kernel, Michael Büker, linville, akpm On Sat, 9 Feb 2008 16:23:06 +0100 Michael B=FCker wrote: > 2) When selecting "Ralink driver support" (CONFIG_RT2X00), the accomp= anying=20 > drivers (CONFIG_RT2400PCI, CONFIG_RT61PC, ...) appear unindented. The= y should=20 > be indented by four spaces. Yes, patch is below. --- =46rom: Randy Dunlap <randy.dunlap@oracle.com> Michael B=FCker <m.bueker@berlin.de> reports that the RT2x00 drivers are not indented as they should be, so use proper dependencies to make them be indented as expected. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> --- drivers/net/wireless/rt2x00/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) --- linux-2.6.24-git21.orig/drivers/net/wireless/rt2x00/Kconfig +++ linux-2.6.24-git21/drivers/net/wireless/rt2x00/Kconfig @@ -11,18 +11,17 @@ config RT2X00 will also be created. That library (when the driver is built as a module) will be called "rt2x00lib.ko". =20 +if RT2X00 + config RT2X00_LIB tristate - depends on RT2X00 =20 config RT2X00_LIB_PCI tristate - depends on RT2X00 select RT2X00_LIB =20 config RT2X00_LIB_USB tristate - depends on RT2X00 select RT2X00_LIB =20 config RT2X00_LIB_FIRMWARE @@ -39,7 +38,7 @@ config RT2X00_LIB_RFKILL =20 config RT2400PCI tristate "Ralink rt2400 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -58,7 +57,7 @@ config RT2400PCI_RFKILL =20 config RT2500PCI tristate "Ralink rt2500 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -77,7 +76,7 @@ config RT2500PCI_RFKILL =20 config RT61PCI tristate "Ralink rt61 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE select EEPROM_93CX6 @@ -97,7 +96,7 @@ config RT61PCI_RFKILL =20 config RT2500USB tristate "Ralink rt2500 usb support" - depends on RT2X00 && USB + depends on USB select RT2X00_LIB_USB ---help--- This is an experimental driver for the Ralink rt2500 wireless chip. @@ -106,7 +105,7 @@ config RT2500USB =20 config RT73USB tristate "Ralink rt73 usb support" - depends on RT2X00 && USB + depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE ---help--- @@ -128,3 +127,4 @@ config RT2X00_DEBUG ---help--- Enable debugging output for all rt2x00 modules =20 +endif - To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Rt2400-devel] [PATCH] wireless: rt2x00: fix driver menu indenting 2008-02-10 18:52 ` [PATCH] wireless: rt2x00: fix driver menu indenting Randy Dunlap @ 2008-02-10 19:03 ` Ivo van Doorn 2008-03-05 6:00 ` Randy Dunlap 0 siblings, 1 reply; 4+ messages in thread From: Ivo van Doorn @ 2008-02-10 19:03 UTC (permalink / raw) To: rt2400-devel Cc: Randy Dunlap, linux-wireless, Michael Büker, linux-kernel, akpm, linville On Sunday 10 February 2008, Randy Dunlap wrote: > On Sat, 9 Feb 2008 16:23:06 +0100 Michael B=FCker wrote: >=20 > > 2) When selecting "Ralink driver support" (CONFIG_RT2X00), the acco= mpanying=20 > > drivers (CONFIG_RT2400PCI, CONFIG_RT61PC, ...) appear unindented. T= hey should=20 > > be indented by four spaces. >=20 > Yes, patch is below. >=20 > --- > From: Randy Dunlap <randy.dunlap@oracle.com> >=20 > Michael B=FCker <m.bueker@berlin.de> reports that the RT2x00 drivers > are not indented as they should be, so use proper dependencies to mak= e > them be indented as expected. >=20 > Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Ack-by: Ivo van Doorn <IvDoorn@gmail.com> --- John, Could you push this directly into wireless-2.6 and probably upstream as= well. Thanks. Ivo > --- > drivers/net/wireless/rt2x00/Kconfig | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) >=20 > --- linux-2.6.24-git21.orig/drivers/net/wireless/rt2x00/Kconfig > +++ linux-2.6.24-git21/drivers/net/wireless/rt2x00/Kconfig > @@ -11,18 +11,17 @@ config RT2X00 > will also be created. That library (when the driver is built as > a module) will be called "rt2x00lib.ko". > =20 > +if RT2X00 > + > config RT2X00_LIB > tristate > - depends on RT2X00 > =20 > config RT2X00_LIB_PCI > tristate > - depends on RT2X00 > select RT2X00_LIB > =20 > config RT2X00_LIB_USB > tristate > - depends on RT2X00 > select RT2X00_LIB > =20 > config RT2X00_LIB_FIRMWARE > @@ -39,7 +38,7 @@ config RT2X00_LIB_RFKILL > =20 > config RT2400PCI > tristate "Ralink rt2400 pci/pcmcia support" > - depends on RT2X00 && PCI > + depends on PCI > select RT2X00_LIB_PCI > select EEPROM_93CX6 > ---help--- > @@ -58,7 +57,7 @@ config RT2400PCI_RFKILL > =20 > config RT2500PCI > tristate "Ralink rt2500 pci/pcmcia support" > - depends on RT2X00 && PCI > + depends on PCI > select RT2X00_LIB_PCI > select EEPROM_93CX6 > ---help--- > @@ -77,7 +76,7 @@ config RT2500PCI_RFKILL > =20 > config RT61PCI > tristate "Ralink rt61 pci/pcmcia support" > - depends on RT2X00 && PCI > + depends on PCI > select RT2X00_LIB_PCI > select RT2X00_LIB_FIRMWARE > select EEPROM_93CX6 > @@ -97,7 +96,7 @@ config RT61PCI_RFKILL > =20 > config RT2500USB > tristate "Ralink rt2500 usb support" > - depends on RT2X00 && USB > + depends on USB > select RT2X00_LIB_USB > ---help--- > This is an experimental driver for the Ralink rt2500 wireless chi= p. > @@ -106,7 +105,7 @@ config RT2500USB > =20 > config RT73USB > tristate "Ralink rt73 usb support" > - depends on RT2X00 && USB > + depends on USB > select RT2X00_LIB_USB > select RT2X00_LIB_FIRMWARE > ---help--- > @@ -128,3 +127,4 @@ config RT2X00_DEBUG > ---help--- > Enable debugging output for all rt2x00 modules > =20 > +endif >=20 > ---------------------------------------------------------------------= ---- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Rt2400-devel mailing list > Rt2400-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/rt2400-devel >=20 - To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Rt2400-devel] [PATCH] wireless: rt2x00: fix driver menu indenting 2008-02-10 19:03 ` [Rt2400-devel] " Ivo van Doorn @ 2008-03-05 6:00 ` Randy Dunlap 2008-03-05 18:11 ` John W. Linville 0 siblings, 1 reply; 4+ messages in thread From: Randy Dunlap @ 2008-03-05 6:00 UTC (permalink / raw) To: Ivo van Doorn Cc: rt2400-devel, linux-wireless, Michael Büker, linux-kernel, akpm, linville On Sun, 10 Feb 2008 20:03:25 +0100 Ivo van Doorn wrote: > On Sunday 10 February 2008, Randy Dunlap wrote: > > On Sat, 9 Feb 2008 16:23:06 +0100 Michael B=FCker wrote: > >=20 > > > 2) When selecting "Ralink driver support" (CONFIG_RT2X00), the ac= companying=20 > > > drivers (CONFIG_RT2400PCI, CONFIG_RT61PC, ...) appear unindented.= They should=20 > > > be indented by four spaces. > >=20 > > Yes, patch is below. > >=20 > > --- > > From: Randy Dunlap <randy.dunlap@oracle.com> > >=20 > > Michael B=FCker <m.bueker@berlin.de> reports that the RT2x00 driver= s > > are not indented as they should be, so use proper dependencies to m= ake > > them be indented as expected. > >=20 > > Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> >=20 > Ack-by: Ivo van Doorn <IvDoorn@gmail.com> >=20 > --- > John, > Could you push this directly into wireless-2.6 and probably upstream = as well. >=20 > Thanks. >=20 > Ivo John, do you have this patch queued somewhere? > > --- > > drivers/net/wireless/rt2x00/Kconfig | 16 ++++++++-------- > > 1 file changed, 8 insertions(+), 8 deletions(-) > >=20 > > --- linux-2.6.24-git21.orig/drivers/net/wireless/rt2x00/Kconfig > > +++ linux-2.6.24-git21/drivers/net/wireless/rt2x00/Kconfig > > @@ -11,18 +11,17 @@ config RT2X00 > > will also be created. That library (when the driver is built as > > a module) will be called "rt2x00lib.ko". > > =20 > > +if RT2X00 > > + > > config RT2X00_LIB > > tristate > > - depends on RT2X00 > > =20 > > config RT2X00_LIB_PCI > > tristate > > - depends on RT2X00 > > select RT2X00_LIB > > =20 > > config RT2X00_LIB_USB > > tristate > > - depends on RT2X00 > > select RT2X00_LIB > > =20 > > config RT2X00_LIB_FIRMWARE > > @@ -39,7 +38,7 @@ config RT2X00_LIB_RFKILL > > =20 > > config RT2400PCI > > tristate "Ralink rt2400 pci/pcmcia support" > > - depends on RT2X00 && PCI > > + depends on PCI > > select RT2X00_LIB_PCI > > select EEPROM_93CX6 > > ---help--- > > @@ -58,7 +57,7 @@ config RT2400PCI_RFKILL > > =20 > > config RT2500PCI > > tristate "Ralink rt2500 pci/pcmcia support" > > - depends on RT2X00 && PCI > > + depends on PCI > > select RT2X00_LIB_PCI > > select EEPROM_93CX6 > > ---help--- > > @@ -77,7 +76,7 @@ config RT2500PCI_RFKILL > > =20 > > config RT61PCI > > tristate "Ralink rt61 pci/pcmcia support" > > - depends on RT2X00 && PCI > > + depends on PCI > > select RT2X00_LIB_PCI > > select RT2X00_LIB_FIRMWARE > > select EEPROM_93CX6 > > @@ -97,7 +96,7 @@ config RT61PCI_RFKILL > > =20 > > config RT2500USB > > tristate "Ralink rt2500 usb support" > > - depends on RT2X00 && USB > > + depends on USB > > select RT2X00_LIB_USB > > ---help--- > > This is an experimental driver for the Ralink rt2500 wireless c= hip. > > @@ -106,7 +105,7 @@ config RT2500USB > > =20 > > config RT73USB > > tristate "Ralink rt73 usb support" > > - depends on RT2X00 && USB > > + depends on USB > > select RT2X00_LIB_USB > > select RT2X00_LIB_FIRMWARE > > ---help--- > > @@ -128,3 +127,4 @@ config RT2X00_DEBUG > > ---help--- > > Enable debugging output for all rt2x00 modules > > =20 > > +endif --- ~Randy -- To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Rt2400-devel] [PATCH] wireless: rt2x00: fix driver menu indenting 2008-03-05 6:00 ` Randy Dunlap @ 2008-03-05 18:11 ` John W. Linville 0 siblings, 0 replies; 4+ messages in thread From: John W. Linville @ 2008-03-05 18:11 UTC (permalink / raw) To: Randy Dunlap Cc: Ivo van Doorn, rt2400-devel, linux-wireless, Michael Büker, linux-kernel, akpm On Tue, Mar 04, 2008 at 10:00:29PM -0800, Randy Dunlap wrote: > On Sun, 10 Feb 2008 20:03:25 +0100 Ivo van Doorn wrote: >=20 > > On Sunday 10 February 2008, Randy Dunlap wrote: > > > On Sat, 9 Feb 2008 16:23:06 +0100 Michael B=FCker wrote: > > >=20 > > > > 2) When selecting "Ralink driver support" (CONFIG_RT2X00), the = accompanying=20 > > > > drivers (CONFIG_RT2400PCI, CONFIG_RT61PC, ...) appear unindente= d. They should=20 > > > > be indented by four spaces. > > >=20 > > > Yes, patch is below. > > >=20 > > > --- > > > From: Randy Dunlap <randy.dunlap@oracle.com> > > >=20 > > > Michael B=FCker <m.bueker@berlin.de> reports that the RT2x00 driv= ers > > > are not indented as they should be, so use proper dependencies to= make > > > them be indented as expected. > > >=20 > > > Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> > >=20 > > Ack-by: Ivo van Doorn <IvDoorn@gmail.com> > >=20 > > --- > > John, > > Could you push this directly into wireless-2.6 and probably upstrea= m as well. > >=20 > > Thanks. > >=20 > > Ivo >=20 > John, do you have this patch queued somewhere? It is in net-2.6.26. commit 0d84d78db5bad848e385cbb1e4ae2ea1f5f27641 Author: Randy Dunlap <randy.dunlap@oracle.com> Date: Sun Feb 10 10:52:52 2008 -0800 wireless: rt2x00: fix driver menu indenting Michael B=FCker <m.bueker@berlin.de> reports that the RT2x00 driver= s are not indented as they should be, so use proper dependencies to m= ake them be indented as expected. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Ack-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Hth! John --=20 John W. Linville linville@tuxdriver.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-03-05 18:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <200802091623.06504.m.bueker@berlin.de>
2008-02-10 18:52 ` [PATCH] wireless: rt2x00: fix driver menu indenting Randy Dunlap
2008-02-10 19:03 ` [Rt2400-devel] " Ivo van Doorn
2008-03-05 6:00 ` Randy Dunlap
2008-03-05 18:11 ` John W. Linville
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).