* Please pull 'upstream' branch of rt2x00
@ 2008-02-17 16:30 Ivo van Doorn
2008-02-17 16:31 ` [PATCH 01/11] rt2x00: Send frames out with configured TX power Ivo van Doorn
` (10 more replies)
0 siblings, 11 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:30 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.2 release of rt2x00. Several important bugfixes like a
partial return of TX/RX activity in the PCI drivers.
Note that _none_ of the drivers (PCI or USB) are in a good shape since the
2.1.0 release. With partial RX/TX activity we are at least now on a similar
behavior as the 2.0.14 version inside kernel 2.6.25.
Speaking of the 2.6.25 kernel, it seems that rt2x00 is not in an all too good
shape in there. If more reports about broken TX/RX come in I will consider
reverting a lot of patches to make rt2x00 look a lot like the version in 2.6.24.
That version wasn't good either, but at least people can't complain about
regressions. ;)
Also note that the git pull request below also contains the patches from
previous pull request. But I noticed that you hadn't pulled in the 2.1.1 release yet.
I won't resent those patches to the list, since there aren't any changes in them
since last week. ;)
Ivo
---
The following changes since commit 2b78397a79d3daa2ba6c633526a7e3b455f9fc73:
Stefano Brivio (1):
b43legacy: Add driver load messages
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: correct address calc for queue private data
Gertjan van Wingerde (1):
Fix hw mode registration with mac80211.
Ivo van Doorn (23):
rt2x00: Fix invalid DMA free
rt2x00: Make rt2x00 less verbose
rt2x00: Remove MGMT ring initialization
rt2x00: Select CONFIG_NEW_LEDS
rt2x00: make csr_cache and csr_addr an union
rt2x00: Fix scheduling while atomic errors in usb drivers
rt2x00: Add queue statistics to debugfs
rt2x00: Fix typo in debug statement
rt2x00: Fix skbdesc->data_len initialization
rt2x00: Fix queue->qid initialization
rt2x00: Cleanup Makefile
rt2x00: Kill guardian urb during disable_radio
rt2x00: Release rt2x00 2.1.1
rt2x00: Send frames out with configured TX power
rt2x00: Don't report driver generated frames to tx_status()
rt2x00: Fix Descriptor DMA initialization
rt2x00: Filter ACK_CTS based on FIF_CONTROL
rt2x00: Remove reset_tsf()
rt2x00: Rename dscape -> mac80211
rt2x00: Cleanup mode registration
rt2x00: Remove async vendor request calls from rt2x00usb
rt2x00: Fix MAC address defines in rt61pci
rt2x00: Release rt2x00 2.1.2
drivers/net/wireless/rt2x00/Kconfig | 3 +-
drivers/net/wireless/rt2x00/Makefile | 41 ++++-------
drivers/net/wireless/rt2x00/rt2400pci.c | 39 ++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 38 ++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 23 ++++---
drivers/net/wireless/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00.h | 50 ++++++++-----
drivers/net/wireless/rt2x00/rt2x00debug.c | 90 ++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00dev.c | 100 +++++++++++++++------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 5 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 24 ++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 108 +++++++++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 14 ++--
drivers/net/wireless/rt2x00/rt2x00queue.c | 36 +++++----
drivers/net/wireless/rt2x00/rt2x00queue.h | 12 +++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 90 +++++++-----------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 18 -----
drivers/net/wireless/rt2x00/rt61pci.c | 54 ++++++--------
drivers/net/wireless/rt2x00/rt61pci.h | 12 ++--
drivers/net/wireless/rt2x00/rt73usb.c | 56 +++++++--------
drivers/net/wireless/rt2x00/rt73usb.h | 4 +-
23 files changed, 453 insertions(+), 378 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* [PATCH 01/11] rt2x00: Send frames out with configured TX power
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
@ 2008-02-17 16:31 ` Ivo van Doorn
2008-02-17 16:32 ` [PATCH 02/11] rt2x00: Don't report driver generated frames to tx_status() Ivo van Doorn
` (9 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:31 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
mac80211 sends the txpower to use during config(),
we already store it in the rt2x00_dev structure.
When writing the descriptor correctly initialize
the txpower field with this value to make sure
all frames are send out with the correct tx power.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.c | 4 +---
drivers/net/wireless/rt2x00/rt73usb.c | 4 +---
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 43d5dd3..bc8a6e4 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1500,10 +1500,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 5, &word);
-/* XXX: removed for now
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- TXPOWER_TO_DEV(control->power_level));
- */
+ TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index af1bb91..63f7604 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1236,10 +1236,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 5, &word);
-/* XXX: removed for now
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- TXPOWER_TO_DEV(control->power_level));
- */
+ TXPOWER_TO_DEV(rt2x00dev->tx_power));
rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
rt2x00_desc_write(txd, 5, word);
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 02/11] rt2x00: Don't report driver generated frames to tx_status()
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-02-17 16:31 ` [PATCH 01/11] rt2x00: Send frames out with configured TX power Ivo van Doorn
@ 2008-02-17 16:32 ` Ivo van Doorn
2008-02-17 16:33 ` [PATCH 04/11] rt2x00: Filter ACK_CTS based on FIF_CONTROL Ivo van Doorn
` (8 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:32 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
This adds a new flag for the skb_frame_desc structure which is used to tag
rts/cts frames that are generated by the driver. Through the tag we can
recognize frames we have generated ourselves, so we don't report their tx
status to mac80211.
This patch is based on the original patch by
Mattias Nissler <mattias.nissler@gmx.de>.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 1 +
drivers/net/wireless/rt2x00/rt2500pci.c | 1 +
drivers/net/wireless/rt2x00/rt2500usb.c | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 20 ++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00mac.c | 15 +++++++++++++++
drivers/net/wireless/rt2x00/rt2x00pci.c | 1 -
drivers/net/wireless/rt2x00/rt2x00queue.h | 12 +++++++++++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 1 -
drivers/net/wireless/rt2x00/rt61pci.c | 1 +
drivers/net/wireless/rt2x00/rt73usb.c | 1 +
10 files changed, 47 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 330b162..1e8586d 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1527,6 +1527,7 @@ static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
*/
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
skbdesc->data = skb->data;
skbdesc->data_len = skb->len;
skbdesc->desc = priv_tx->desc;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a590416..a44aed5 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1839,6 +1839,7 @@ static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
*/
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
skbdesc->data = skb->data;
skbdesc->data_len = skb->len;
skbdesc->desc = priv_tx->desc;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ad8b6a0..27681fc 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1747,6 +1747,7 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
*/
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
skbdesc->data = skb->data + intf->beacon->queue->desc_size;
skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
skbdesc->desc = skb->data;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c714c4c..3e9e61d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -497,6 +497,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc;
struct ieee80211_tx_status tx_status;
int success = !!(txdesc->status == TX_SUCCESS ||
txdesc->status == TX_SUCCESS_RETRY);
@@ -537,12 +538,23 @@ void rt2x00lib_txdone(struct queue_entry *entry,
}
/*
- * Send the tx_status to mac80211 & debugfs.
- * mac80211 will clean up the skb structure.
+ * Send the tx_status to debugfs. Only send the status report
+ * to mac80211 when the frame originated from there. If this was
+ * a extra frame coming through a mac80211 library call (RTS/CTS)
+ * then we should not send the status report back.
+ * If send to mac80211, mac80211 will clean up the skb structure,
+ * otherwise we have to do it ourself.
*/
- get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_TXDONE;
+ skbdesc = get_skb_frame_desc(entry->skb);
+ skbdesc->frame_type = DUMP_FRAME_TXDONE;
+
rt2x00debug_dump_frame(rt2x00dev, entry->skb);
- ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, &tx_status);
+
+ if (!(skbdesc->flags & FRAME_DESC_DRIVER_GENERATED))
+ ieee80211_tx_status_irqsafe(rt2x00dev->hw,
+ entry->skb, &tx_status);
+ else
+ dev_kfree_skb(entry->skb);
entry->skb = NULL;
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 91b62dd..a54f687 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -34,6 +34,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
struct sk_buff *frag_skb,
struct ieee80211_tx_control *control)
{
+ struct skb_frame_desc *skbdesc;
struct sk_buff *skb;
int size;
@@ -60,6 +61,13 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
frag_skb->data, frag_skb->len, control,
(struct ieee80211_rts *)(skb->data));
+ /*
+ * Initialize skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
+
if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) {
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
@@ -74,6 +82,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
struct data_queue *queue;
+ struct skb_frame_desc *skbdesc;
u16 frame_control;
/*
@@ -121,6 +130,12 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
}
}
+ /*
+ * Initialize skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+
if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) {
ieee80211_stop_queue(rt2x00dev->hw, control->queue);
return NETDEV_TX_BUSY;
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 8f88ca2..7d2f406 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -61,7 +61,6 @@ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
* Fill in skb descriptor
*/
skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->data = skb->data;
skbdesc->data_len = skb->len;
skbdesc->desc = priv_tx->desc;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 956e0be..fbabf38 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -82,12 +82,22 @@ enum rt2x00_bcn_queue {
};
/**
+ * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc
+ *
+ * @FRAME_DESC_DRIVER_GENERATED: Frame was generated inside driver
+ * and should not be reported back to mac80211 during txdone.
+ */
+enum skb_frame_desc_flags {
+ FRAME_DESC_DRIVER_GENERATED = 1 << 0,
+};
+
+/**
* struct skb_frame_desc: Descriptor information for the skb buffer
*
* This structure is placed over the skb->cb array, this means that
* this structure should not exceed the size of that array (48 bytes).
*
- * @flags: Frame flags.
+ * @flags: Frame flags, see &enum skb_frame_desc_flags.
* @frame_type: Frame type, see &enum rt2x00_dump_type.
* @data: Pointer to data part of frame (Start of ieee80211 header).
* @desc: Pointer to descriptor part of the frame.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 6cb4432..89471b2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -252,7 +252,6 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
* Fill in skb descriptor
*/
skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->data = skb->data + queue->desc_size;
skbdesc->data_len = skb->len - queue->desc_size;
skbdesc->desc = skb->data;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index bc8a6e4..80f0d30 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2396,6 +2396,7 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
*/
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
skbdesc->data = skb->data + intf->beacon->queue->desc_size;
skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
skbdesc->desc = skb->data;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 63f7604..3ccf4fd 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1998,6 +1998,7 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
*/
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
skbdesc->data = skb->data + intf->beacon->queue->desc_size;
skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
skbdesc->desc = skb->data;
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 04/11] rt2x00: Filter ACK_CTS based on FIF_CONTROL
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-02-17 16:31 ` [PATCH 01/11] rt2x00: Send frames out with configured TX power Ivo van Doorn
2008-02-17 16:32 ` [PATCH 02/11] rt2x00: Don't report driver generated frames to tx_status() Ivo van Doorn
@ 2008-02-17 16:33 ` Ivo van Doorn
2008-02-17 16:33 ` [PATCH 03/11] rt2x00: Fix Descriptor DMA initialization Ivo van Doorn
` (7 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:33 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
The ACK_CTS frame is a control frame, this means
dropping the frame depends on the FIF_CONTROL flag
for filtering.
This also fixes an obvious typo in register definition.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.c | 5 +++--
drivers/net/wireless/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 3 ++-
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index a7aebb4..722d734 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2328,8 +2328,9 @@ static void rt61pci_configure_filter(struct ieee80211_hw *hw,
rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
!(*total_flags & FIF_ALLMULTI));
- rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS,
+ !(*total_flags & FIF_CONTROL));
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 2f9a889..d504e70 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -405,7 +405,7 @@ struct hw_pairwise_ta_entry {
#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
-#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000)
+#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 3ccf4fd..615415a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1925,7 +1925,8 @@ static void rt73usb_configure_filter(struct ieee80211_hw *hw,
rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
!(*total_flags & FIF_ALLMULTI));
rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
- rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1);
+ rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS,
+ !(*total_flags & FIF_CONTROL));
rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
}
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 03/11] rt2x00: Fix Descriptor DMA initialization
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (2 preceding siblings ...)
2008-02-17 16:33 ` [PATCH 04/11] rt2x00: Filter ACK_CTS based on FIF_CONTROL Ivo van Doorn
@ 2008-02-17 16:33 ` Ivo van Doorn
2008-02-17 16:33 ` [PATCH 05/11] rt2x00: Remove reset_tsf() Ivo van Doorn
` (6 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:33 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
As Adam Baker reported the DMA address for the
descriptor base was incorrectly initialized in
the PCI drivers.
Instead of the DMA base for the descriptor, the
DMA base for the data was passed resulting in a
broken TX/RX state for PCI drivers.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 21 ++++++++++------
drivers/net/wireless/rt2x00/rt2500pci.c | 18 +++++++++-----
drivers/net/wireless/rt2x00/rt2x00pci.c | 38 +++++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2x00pci.h | 6 +++-
drivers/net/wireless/rt2x00/rt61pci.c | 21 +++++++++++-----
5 files changed, 63 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 1e8586d..a80385d 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -597,11 +597,12 @@ static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
u32 word;
rt2x00_desc_read(priv_rx->desc, 2, &word);
- rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->queue->data_size);
+ rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
+ entry->queue->data_size);
rt2x00_desc_write(priv_rx->desc, 2, word);
rt2x00_desc_read(priv_rx->desc, 1, &word);
- rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->dma);
+ rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
rt2x00_desc_write(priv_rx->desc, 1, word);
rt2x00_desc_read(priv_rx->desc, 0, &word);
@@ -616,7 +617,7 @@ static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev,
u32 word;
rt2x00_desc_read(priv_tx->desc, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->dma);
+ rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
rt2x00_desc_write(priv_tx->desc, 1, word);
rt2x00_desc_read(priv_tx->desc, 2, &word);
@@ -648,22 +649,26 @@ static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR3, ®);
- rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR5, ®);
- rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
priv_tx = rt2x00dev->bcn[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR4, ®);
- rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
priv_tx = rt2x00dev->bcn[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR6, ®);
- rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
rt2x00pci_register_read(rt2x00dev, RXCSR1, ®);
@@ -673,7 +678,7 @@ static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_rx = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, RXCSR2, ®);
- rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a44aed5..4a6a60a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -691,7 +691,7 @@ static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
u32 word;
rt2x00_desc_read(priv_rx->desc, 1, &word);
- rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->dma);
+ rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
rt2x00_desc_write(priv_rx->desc, 1, word);
rt2x00_desc_read(priv_rx->desc, 0, &word);
@@ -706,7 +706,7 @@ static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev,
u32 word;
rt2x00_desc_read(priv_tx->desc, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->dma);
+ rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
rt2x00_desc_write(priv_tx->desc, 1, word);
rt2x00_desc_read(priv_tx->desc, 0, &word);
@@ -733,22 +733,26 @@ static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR3, ®);
- rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR5, ®);
- rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
priv_tx = rt2x00dev->bcn[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR4, ®);
- rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
priv_tx = rt2x00dev->bcn[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, TXCSR6, ®);
- rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
rt2x00pci_register_read(rt2x00dev, RXCSR1, ®);
@@ -758,7 +762,7 @@ static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_rx = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, RXCSR2, ®);
- rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 7d2f406..1960d93 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -218,40 +218,44 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
struct queue_entry_priv_pci_rx *priv_rx;
struct queue_entry_priv_pci_tx *priv_tx;
- void *desc;
+ void *addr;
+ dma_addr_t dma;
+ void *desc_addr;
+ dma_addr_t desc_dma;
void *data_addr;
- void *data;
dma_addr_t data_dma;
- dma_addr_t dma;
unsigned int i;
/*
* Allocate DMA memory for descriptor and buffer.
*/
- data_addr = pci_alloc_consistent(pci_dev, dma_size(queue), &data_dma);
- if (!data_addr)
+ addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma);
+ if (!addr)
return -ENOMEM;
- memset(data_addr, 0, dma_size(queue));
+ memset(addr, 0, dma_size(queue));
/*
* Initialize all queue entries to contain valid addresses.
*/
for (i = 0; i < queue->limit; i++) {
- desc = desc_offset(queue, data_addr, i);
- data = data_offset(queue, data_addr, i);
- dma = data_offset(queue, data_dma, i);
+ desc_addr = desc_offset(queue, addr, i);
+ desc_dma = desc_offset(queue, dma, i);
+ data_addr = data_offset(queue, addr, i);
+ data_dma = data_offset(queue, dma, i);
if (queue->qid == QID_RX) {
priv_rx = queue->entries[i].priv_data;
- priv_rx->desc = desc;
- priv_rx->data = data;
- priv_rx->dma = dma;
+ priv_rx->desc = desc_addr;
+ priv_rx->desc_dma = desc_dma;
+ priv_rx->data = data_addr;
+ priv_rx->data_dma = data_dma;
} else {
priv_tx = queue->entries[i].priv_data;
- priv_tx->desc = desc;
- priv_tx->data = data;
- priv_tx->dma = dma;
+ priv_tx->desc = desc_addr;
+ priv_tx->desc_dma = desc_dma;
+ priv_tx->data = data_addr;
+ priv_tx->data_dma = data_dma;
}
}
@@ -270,13 +274,13 @@ static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
if (queue->qid == QID_RX) {
priv_rx = queue->entries[0].priv_data;
data_addr = priv_rx->data;
- data_dma = priv_rx->dma;
+ data_dma = priv_rx->data_dma;
priv_rx->data = NULL;
} else {
priv_tx = queue->entries[0].priv_data;
data_addr = priv_tx->data;
- data_dma = priv_tx->dma;
+ data_dma = priv_tx->data_dma;
priv_tx->data = NULL;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 8932b31..9d1cdb9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -103,9 +103,10 @@ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
*/
struct queue_entry_priv_pci_rx {
__le32 *desc;
+ dma_addr_t desc_dma;
void *data;
- dma_addr_t dma;
+ dma_addr_t data_dma;
};
/**
@@ -118,9 +119,10 @@ struct queue_entry_priv_pci_rx {
*/
struct queue_entry_priv_pci_tx {
__le32 *desc;
+ dma_addr_t desc_dma;
void *data;
- dma_addr_t dma;
+ dma_addr_t data_dma;
struct ieee80211_tx_control control;
};
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 80f0d30..a7aebb4 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -975,7 +975,8 @@ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
u32 word;
rt2x00_desc_read(priv_rx->desc, 5, &word);
- rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, priv_rx->dma);
+ rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
+ priv_rx->data_dma);
rt2x00_desc_write(priv_rx->desc, 5, word);
rt2x00_desc_read(priv_rx->desc, 0, &word);
@@ -999,7 +1000,8 @@ static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev,
rt2x00_desc_write(priv_tx->desc, 5, word);
rt2x00_desc_read(priv_tx->desc, 6, &word);
- rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, priv_tx->dma);
+ rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
+ priv_tx->data_dma);
rt2x00_desc_write(priv_tx->desc, 6, word);
rt2x00_desc_read(priv_tx->desc, 0, &word);
@@ -1035,22 +1037,26 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®);
- rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®);
- rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
priv_tx = rt2x00dev->tx[2].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®);
- rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
priv_tx = rt2x00dev->tx[3].entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®);
- rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, priv_tx->dma);
+ rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER,
+ priv_tx->desc_dma);
rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®);
@@ -1062,7 +1068,8 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
priv_rx = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®);
- rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, priv_rx->dma);
+ rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER,
+ priv_rx->desc_dma);
rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®);
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 05/11] rt2x00: Remove reset_tsf()
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (3 preceding siblings ...)
2008-02-17 16:33 ` [PATCH 03/11] rt2x00: Fix Descriptor DMA initialization Ivo van Doorn
@ 2008-02-17 16:33 ` Ivo van Doorn
2008-02-17 16:34 ` [PATCH 06/11] rt2x00: Rename dscape -> mac80211 Ivo van Doorn
` (5 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:33 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Specifications indicate the TSF registers are read-only,
so there is no point in writing 0 to those registers.
As far as I know there isn't another way to reset the
TSF registers. So removing these callbacks will notify
mac80211 about the lack of support.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 9 ---------
drivers/net/wireless/rt2x00/rt2500pci.c | 9 ---------
drivers/net/wireless/rt2x00/rt61pci.c | 9 ---------
drivers/net/wireless/rt2x00/rt73usb.c | 9 ---------
4 files changed, 0 insertions(+), 36 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index a80385d..23b14b0 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1506,14 +1506,6 @@ static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
return tsf;
}
-static void rt2400pci_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- rt2x00pci_register_write(rt2x00dev, CSR16, 0);
- rt2x00pci_register_write(rt2x00dev, CSR17, 0);
-}
-
static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
@@ -1582,7 +1574,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.conf_tx = rt2400pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2400pci_get_tsf,
- .reset_tsf = rt2400pci_reset_tsf,
.beacon_update = rt2400pci_beacon_update,
.tx_last_beacon = rt2400pci_tx_last_beacon,
};
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 4a6a60a..26e1fcc 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1817,14 +1817,6 @@ static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
return tsf;
}
-static void rt2500pci_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- rt2x00pci_register_write(rt2x00dev, CSR16, 0);
- rt2x00pci_register_write(rt2x00dev, CSR17, 0);
-}
-
static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
@@ -1893,7 +1885,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
- .reset_tsf = rt2500pci_reset_tsf,
.beacon_update = rt2500pci_beacon_update,
.tx_last_beacon = rt2500pci_tx_last_beacon,
};
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 722d734..3b10452 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2362,14 +2362,6 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
return tsf;
}
-static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
- rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
-}
-
static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
@@ -2446,7 +2438,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
- .reset_tsf = rt61pci_reset_tsf,
.beacon_update = rt61pci_beacon_update,
};
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 615415a..43f5676 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1968,14 +1968,6 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
#define rt73usb_get_tsf NULL
#endif
-static void rt73usb_reset_tsf(struct ieee80211_hw *hw)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0);
- rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0);
-}
-
static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
@@ -2043,7 +2035,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt73usb_get_tsf,
- .reset_tsf = rt73usb_reset_tsf,
.beacon_update = rt73usb_beacon_update,
};
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 06/11] rt2x00: Rename dscape -> mac80211
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (4 preceding siblings ...)
2008-02-17 16:33 ` [PATCH 05/11] rt2x00: Remove reset_tsf() Ivo van Doorn
@ 2008-02-17 16:34 ` Ivo van Doorn
2008-02-17 16:35 ` [PATCH 07/11] rt2x00: Cleanup mode registration Ivo van Doorn
` (4 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:34 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
The dscape stack was renamed to mac80211 a long time ago,
we are long overdue with fixing all comments to reflect this.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/Kconfig | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +++---
drivers/net/wireless/rt2x00/rt2500pci.h | 4 ++--
drivers/net/wireless/rt2x00/rt2500usb.h | 4 ++--
drivers/net/wireless/rt2x00/rt61pci.h | 4 ++--
drivers/net/wireless/rt2x00/rt73usb.h | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 4bb46e9..bfeb4f8 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -5,7 +5,7 @@ config RT2X00
This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
- These drivers will make use of the Devicescape ieee80211 stack.
+ These drivers will make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 3d59d66..da178d4 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -923,13 +923,13 @@
#define RXD_W7_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
* NOTE: Logics in rt2400pci for txpower are reversed
* compared to the other rt2x00 drivers. A higher txpower
* value means that the txpower must be lowered. This is
* important when converting the value coming from the
- * dscape stack to the rt2400 acceptable value.
+ * mac80211 stack to the rt2400 acceptable value.
*/
#define MIN_TXPOWER 31
#define MAX_TXPOWER 62
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 0af130c..1389955 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1213,8 +1213,8 @@
#define RXD_W10_DROP FIELD32(0x00000001)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
#define MAX_TXPOWER 31
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 647cd2d..a37a068 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -787,8 +787,8 @@
#define RXD_W3_EIV FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
#define MAX_TXPOWER 31
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index d504e70..4ef7ef3 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -1455,8 +1455,8 @@ struct hw_pairwise_ta_entry {
#define RXD_W15_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
#define MAX_TXPOWER 31
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 3f96756..06d6874 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -1023,8 +1023,8 @@ struct hw_pairwise_ta_entry {
#define RXD_W5_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
#define MAX_TXPOWER 31
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 07/11] rt2x00: Cleanup mode registration
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (5 preceding siblings ...)
2008-02-17 16:34 ` [PATCH 06/11] rt2x00: Rename dscape -> mac80211 Ivo van Doorn
@ 2008-02-17 16:35 ` Ivo van Doorn
2008-02-17 16:35 ` [PATCH 08/11] rt2x00: Remove async vendor request calls from rt2x00usb Ivo van Doorn
` (3 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:35 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Don't wildly pass any number for num_rates to rt2x00lib,
instead pass which type of rates are supported (CCK, OFDM).
Same for num_modes but then for the 2GHZ and 5GHZ band.
This makes the interface look much nicer and makes
extending it later easier.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 6 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00.h | 38 +++++++++------
drivers/net/wireless/rt2x00/rt2x00dev.c | 80 +++++++++++++++---------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 5 +-
drivers/net/wireless/rt2x00/rt61pci.c | 6 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 ++--
8 files changed, 81 insertions(+), 72 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 23b14b0..b63bc66 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1348,8 +1348,8 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 1;
- spec->num_rates = 4;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 26e1fcc..add8aff 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1662,8 +1662,8 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1684,9 +1684,9 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
- spec->num_modes = 3;
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 27681fc..0a5900b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1582,8 +1582,8 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1604,9 +1604,9 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
- spec->num_modes = 3;
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 7a83e0a..e315d79 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -392,30 +392,38 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
return (struct rt2x00_intf *)vif->drv_priv;
}
-/*
+/**
+ * struct hw_mode_spec: Hardware specifications structure
+ *
* Details about the supported modes, rates and channels
* of a particular chipset. This is used by rt2x00lib
* to build the ieee80211_hw_mode array for mac80211.
+ *
+ * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
+ * @supported_rates: Rate types which are supported (CCK, OFDM).
+ * @num_channels: Number of supported channels. This is used as array size
+ * for @tx_power_a, @tx_power_bg and @channels.
+ * channels: Device/chipset specific channel values (See &struct rf_channel).
+ * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
+ * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
+ * @tx_power_default: Default TX power value to use when either
+ * @tx_power_a or @tx_power_bg is missing.
*/
struct hw_mode_spec {
- /*
- * Number of modes, rates and channels.
- */
- int num_modes;
- int num_rates;
- int num_channels;
+ unsigned int supported_bands;
+#define SUPPORT_BAND_2GHZ 0x00000001
+#define SUPPORT_BAND_5GHZ 0x00000002
+
+ unsigned int supported_rates;
+#define SUPPORT_RATE_CCK 0x00000001
+#define SUPPORT_RATE_OFDM 0x00000002
+
+ unsigned int num_channels;
+ const struct rf_channel *channels;
- /*
- * txpower values.
- */
const u8 *tx_power_a;
const u8 *tx_power_bg;
u8 tx_power_default;
-
- /*
- * Device/chipset specific value.
- */
- const struct rf_channel *channels;
};
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3e9e61d..6103175 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -764,25 +764,25 @@ EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
*/
const struct rt2x00_rate rt2x00_supported_rates[12] = {
{
- .flags = 0,
+ .flags = DEV_RATE_CCK,
.bitrate = 10,
.ratemask = DEV_RATEMASK_1MB,
.plcp = 0x00,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 20,
.ratemask = DEV_RATEMASK_2MB,
.plcp = 0x01,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 55,
.ratemask = DEV_RATEMASK_5_5MB,
.plcp = 0x02,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 110,
.ratemask = DEV_RATEMASK_11MB,
.plcp = 0x03,
@@ -865,67 +865,64 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
struct hw_mode_spec *spec)
{
struct ieee80211_hw *hw = rt2x00dev->hw;
- struct ieee80211_supported_band *sbands;
struct ieee80211_channel *channels;
struct ieee80211_rate *rates;
+ unsigned int num_rates;
unsigned int i;
unsigned char tx_power;
- sbands = &rt2x00dev->bands[0];
+ num_rates = 0;
+ if (spec->supported_rates & SUPPORT_RATE_CCK)
+ num_rates += 4;
+ if (spec->supported_rates & SUPPORT_RATE_OFDM)
+ num_rates += 8;
channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
if (!channels)
return -ENOMEM;
- rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL);
+ rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
if (!rates)
goto exit_free_channels;
/*
* Initialize Rate list.
*/
- for (i = 0; i < spec->num_rates; i++)
+ for (i = 0; i < num_rates; i++)
rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
/*
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
- if (spec->channels[i].channel <= 14)
- tx_power = spec->tx_power_bg[i];
- else if (spec->tx_power_a)
- tx_power = spec->tx_power_a[i];
- else
- tx_power = spec->tx_power_default;
+ if (spec->channels[i].channel <= 14) {
+ if (spec->tx_power_bg)
+ tx_power = spec->tx_power_bg[i];
+ else
+ tx_power = spec->tx_power_default;
+ } else {
+ if (spec->tx_power_a)
+ tx_power = spec->tx_power_a[i];
+ else
+ tx_power = spec->tx_power_default;
+ }
rt2x00lib_channel(&channels[i],
spec->channels[i].channel, tx_power, i);
}
/*
- * Intitialize 802.11b
- * Rates: CCK.
- * Channels: 2.4 GHz
- */
- if (spec->num_modes > 0) {
- sbands[IEEE80211_BAND_2GHZ].n_channels = 14;
- sbands[IEEE80211_BAND_2GHZ].n_bitrates = 4;
- sbands[IEEE80211_BAND_2GHZ].channels = channels;
- sbands[IEEE80211_BAND_2GHZ].bitrates = rates;
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
- }
-
- /*
- * Intitialize 802.11g
+ * Intitialize 802.11b, 802.11g
* Rates: CCK, OFDM.
* Channels: 2.4 GHz
*/
- if (spec->num_modes > 1) {
- sbands[IEEE80211_BAND_2GHZ].n_channels = 14;
- sbands[IEEE80211_BAND_2GHZ].n_bitrates = spec->num_rates;
- sbands[IEEE80211_BAND_2GHZ].channels = channels;
- sbands[IEEE80211_BAND_2GHZ].bitrates = rates;
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
+ if (spec->supported_bands > SUPPORT_BAND_2GHZ) {
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
}
/*
@@ -933,12 +930,15 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Rates: OFDM.
* Channels: OFDM, UNII, HiperLAN2.
*/
- if (spec->num_modes > 2) {
- sbands[IEEE80211_BAND_5GHZ].n_channels = spec->num_channels - 14;
- sbands[IEEE80211_BAND_5GHZ].n_bitrates = spec->num_rates - 4;
- sbands[IEEE80211_BAND_5GHZ].channels = &channels[14];
- sbands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
+ if (spec->supported_bands > SUPPORT_BAND_5GHZ) {
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
+ spec->num_channels - 14;
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
+ num_rates - 4;
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
}
return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 2a611e4..34ccb3d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -38,8 +38,9 @@
*/
struct rt2x00_rate {
unsigned short flags;
-#define DEV_RATE_OFDM 0x0001
-#define DEV_RATE_SHORT_PREAMBLE 0x0002
+#define DEV_RATE_CCK 0x0001
+#define DEV_RATE_OFDM 0x0002
+#define DEV_RATE_SHORT_PREAMBLE 0x0004
unsigned short bitrate; /* In 100kbit/s */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3b10452..70cfdad 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2205,8 +2205,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -2221,7 +2221,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- spec->num_modes = 3;
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 43f5676..cae4b02 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1787,8 +1787,8 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1797,20 +1797,20 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
spec->channels = rf_vals_bg_2528;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5226);
spec->channels = rf_vals_5226;
} else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
spec->num_channels = 14;
spec->channels = rf_vals_5225_2527;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
spec->channels = rf_vals_5225_2527;
}
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- spec->num_modes = 3;
-
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 08/11] rt2x00: Remove async vendor request calls from rt2x00usb
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (6 preceding siblings ...)
2008-02-17 16:35 ` [PATCH 07/11] rt2x00: Cleanup mode registration Ivo van Doorn
@ 2008-02-17 16:35 ` Ivo van Doorn
2008-02-17 16:35 ` [PATCH 09/11] Fix hw mode registration with mac80211 Ivo van Doorn
` (2 subsequent siblings)
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:35 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
The async vendor requests are a ugly hack which is not working correctly.
The proper fix for the scheduling while atomic issue is finding out why
we can't use led classes for USB drivers and fix that.
Just replace all async calls with the regular ones and print an
error for the disallowed LED configuration attempts. That will
help in determining which led class is causing the problem.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2500usb.c | 10 +++++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 52 -------------------------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 18 -----------
drivers/net/wireless/rt2x00/rt73usb.c | 23 +++++++++----
4 files changed, 24 insertions(+), 79 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 0a5900b..d9643c5 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -292,6 +292,12 @@ static void rt2500usb_led_brightness(struct led_classdev *led_cdev,
unsigned int activity =
led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
+ if (in_atomic()) {
+ NOTICE(led->rt2x00dev,
+ "Ignoring LED brightness command for led %d", led->type);
+ return;
+ }
+
if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
MAC_CSR20_LINK, enabled);
@@ -299,8 +305,8 @@ static void rt2500usb_led_brightness(struct led_classdev *led_cdev,
MAC_CSR20_ACTIVITY, enabled && activity);
}
- rt2x00usb_vendor_request_async(led->rt2x00dev, USB_SINGLE_WRITE,
- MAC_CSR20, led->rt2x00dev->led_mcu_reg);
+ rt2500usb_register_write(led->rt2x00dev, MAC_CSR20,
+ led->rt2x00dev->led_mcu_reg);
}
#else
#define rt2500usb_led_brightness NULL
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 89471b2..063b167 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,58 +122,6 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
-static void rt2x00usb_vendor_request_async_complete(struct urb *urb)
-{
- /*
- * We're done with it, descrease usage count and let the
- * usb layer delete it as soon as it is done with it.
- */
- usb_put_urb(urb);
-}
-
-int rt2x00usb_vendor_request_async(struct rt2x00_dev *rt2x00dev,
- const u8 request, const u16 offset,
- const u16 value)
-{
- struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
- struct usb_ctrlrequest *ctrl;
- struct urb *urb;
- int status;
-
- urb = usb_alloc_urb(0, GFP_NOIO);
- if (!urb)
- return -ENOMEM;
-
- ctrl = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
- if (!ctrl) {
- status = -ENOMEM;
- goto exit;
- }
-
- ctrl->bRequestType= USB_VENDOR_REQUEST_OUT;
- ctrl->bRequest = request;
- ctrl->wValue = cpu_to_le16p(&value);
- ctrl->wIndex = cpu_to_le16p(&offset);
- ctrl->wLength = 0;
-
- usb_fill_control_urb(urb, usb_dev, usb_sndctrlpipe(usb_dev, 0),
- (unsigned char *)ctrl, NULL, 0,
- rt2x00usb_vendor_request_async_complete, NULL);
-
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (!status)
- goto exit;
-
- return 0;
-
-exit:
- usb_put_urb(urb);
- kfree(ctrl);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_async);
-
/*
* TX data handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 275b089..11e5518 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -194,24 +194,6 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
eeprom, lenght, timeout);
}
-/**
- * rt2x00usb_vendor_request_async - Send register command to device (async)
- * @rt2x00dev: Pointer to &struct rt2x00_dev
- * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
- * @offset: Register offset to perform action on
- * @value: Value to write to device
- *
- * Asynchroneous version of &rt2x00usb_vendor_request this is required
- * for some routines where the driver cannot sleep because it is in
- * irq context. Note that with this function the driver will not be
- * notified on failure or timeout of the command. It will only be notified
- * if the start of the command succeeded or not. This means it should not be
- * used when the command must succeed.
- */
-int rt2x00usb_vendor_request_async(struct rt2x00_dev *rt2x00dev,
- const u8 request, const u16 offset,
- const u16 value);
-
/*
* Radio handlers
*/
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index cae4b02..7d6ee97 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -290,29 +290,38 @@ static void rt73usb_led_brightness(struct led_classdev *led_cdev,
unsigned int bg_mode =
(enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+ if (in_atomic()) {
+ NOTICE(led->rt2x00dev,
+ "Ignoring LED brightness command for led %d", led->type);
+ return;
+ }
+
if (led->type == LED_TYPE_RADIO) {
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
MCU_LEDCS_RADIO_STATUS, enabled);
- rt2x00usb_vendor_request_async(led->rt2x00dev, USB_LED_CONTROL,
- 0, led->rt2x00dev->led_mcu_reg);
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
+ 0, led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
} else if (led->type == LED_TYPE_ASSOC) {
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
MCU_LEDCS_LINK_BG_STATUS, bg_mode);
rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
MCU_LEDCS_LINK_A_STATUS, a_mode);
- rt2x00usb_vendor_request_async(led->rt2x00dev, USB_LED_CONTROL,
- 0, led->rt2x00dev->led_mcu_reg);
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
+ 0, led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
} else if (led->type == LED_TYPE_QUALITY) {
/*
* The brightness is divided into 6 levels (0 - 5),
* this means we need to convert the brightness
* argument into the matching level within that range.
*/
- rt2x00usb_vendor_request_async(led->rt2x00dev, USB_LED_CONTROL,
- brightness / (LED_FULL / 6),
- led->rt2x00dev->led_mcu_reg);
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
+ brightness / (LED_FULL / 6),
+ led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
}
}
#else
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 09/11] Fix hw mode registration with mac80211.
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (7 preceding siblings ...)
2008-02-17 16:35 ` [PATCH 08/11] rt2x00: Remove async vendor request calls from rt2x00usb Ivo van Doorn
@ 2008-02-17 16:35 ` Ivo van Doorn
2008-02-17 16:36 ` [PATCH 10/11] rt2x00: Fix MAC address defines in rt61pci Ivo van Doorn
2008-02-17 16:36 ` [PATCH 11/11] rt2x00: Release rt2x00 2.1.2 Ivo van Doorn
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:35 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
From: Gertjan van Wingerde <gwingerde@kpnplanet.nl>
The supported_bands field of struct hw_mode_spec now represents a bitfield,
so bitfield operators need to be tested with when setting the band data.
The current code generates the following warning:
[176624.986244] WARNING: at /usr/local/src/incoming/compat-wireless-2.6/net/wireless/core.c:269 wiphy_register()
[176624.986249] Pid: 12548, comm: modprobe Tainted: P 2.6.24.2#4
[176624.986251]
[176624.986251] Call Trace:
[176624.986277] [<ffffffff881c56bf>] :cfg80211:wiphy_register+0x17f/0x1a0
[176624.986282] [<ffffffff881ddf80>] :rt61pci:rt61pci_eepromregister_write+0x0/0x80
[176624.986302] [<ffffffff88b7e4bc>] :mac80211:ieee80211_register_hw+0x2c/0x2b0
[176624.986310] [<ffffffff881cdc80>] :rt2x00lib:rt2x00lib_probe_dev+0x350/0x3f0
[176624.986318] [<ffffffff881d74b9>] :rt2x00pci:rt2x00pci_probe+0x149/0x200
[176624.986325] [<ffffffff8030c858>] pci_device_probe+0xf8/0x170
[176624.986331] [<ffffffff803594fc>] driver_probe_device+0x9c/0x1c0
[176624.986335] [<ffffffff80359700>] __driver_attach+0x0/0xb0
[176624.986337] [<ffffffff803597a5>] __driver_attach+0xa5/0xb0
[176624.986341] [<ffffffff8035877d>] bus_for_each_dev+0x4d/0x80
[176624.986347] [<ffffffff80358b8c>] bus_add_driver+0xac/0x210
[176624.986351] [<ffffffff8030cad3>] __pci_register_driver+0x73/0xc0
[176624.986357] [<ffffffff8025689e>] sys_init_module+0x18e/0x1a20
[176624.986374] [<ffffffff8020c42e>] system_call+0x7e/0x83
Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6103175..015738a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -916,7 +916,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Rates: CCK, OFDM.
* Channels: 2.4 GHz
*/
- if (spec->supported_bands > SUPPORT_BAND_2GHZ) {
+ if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
@@ -930,7 +930,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Rates: OFDM.
* Channels: OFDM, UNII, HiperLAN2.
*/
- if (spec->supported_bands > SUPPORT_BAND_5GHZ) {
+ if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
spec->num_channels - 14;
rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 10/11] rt2x00: Fix MAC address defines in rt61pci
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (8 preceding siblings ...)
2008-02-17 16:35 ` [PATCH 09/11] Fix hw mode registration with mac80211 Ivo van Doorn
@ 2008-02-17 16:36 ` Ivo van Doorn
2008-02-17 16:36 ` [PATCH 11/11] rt2x00: Release rt2x00 2.1.2 Ivo van Doorn
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:36 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
The MAC address offset defines were incorrect because
the byte offset was used instead of word index. This
bug had no affect on normal operations since these
defines weren't used. (EEPROM_MAC_ADDR_0 was used
to read 6 bytes from).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 4ef7ef3..3511bba 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -1130,10 +1130,10 @@ struct hw_pairwise_ta_entry {
#define EEPROM_MAC_ADDR_0 0x0002
#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
-#define EEPROM_MAC_ADDR1 0x0004
+#define EEPROM_MAC_ADDR1 0x0003
#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2 0x0006
+#define EEPROM_MAC_ADDR_2 0x0004
#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread* [PATCH 11/11] rt2x00: Release rt2x00 2.1.2
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
` (9 preceding siblings ...)
2008-02-17 16:36 ` [PATCH 10/11] rt2x00: Fix MAC address defines in rt61pci Ivo van Doorn
@ 2008-02-17 16:36 ` Ivo van Doorn
10 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-17 16:36 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index e315d79..d0f027a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -44,7 +44,7 @@
/*
* Module information.
*/
-#define DRV_VERSION "2.1.1"
+#define DRV_VERSION "2.1.2"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
--
1.5.4
^ permalink raw reply related [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-12-20 9:52 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-12-20 9:52 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest rt2x00 update.
Lots of new features, optimizations and cleanups.
Ivo
---
The following changes since commit 30b5741a6880688c4540c8f80f90371f42b05a63:
Winkler, Tomas (1):
iwl3945: use iwl_rb_status
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Andrey Yurovsky (1):
rt2x00: Add mesh support
Ivo van Doorn (14):
rt2x00: Implement Powersaving
rt2x00: Move link tuning into seperate file
rt2x00: Reduce calls to bbp_read()
rt2x00: Restrict interface between rt2x00link and drivers
rt2x00: Add RFKILL support to rt2500usb and rt73usb
rt2x00: Rename CONFIG_CRYPTO_COPY_IV
rt2x00: Implement WDS support
rt2x00: Split EEPROM_NIC_TX_RX_FIXED
rt2x00: Move code into seperate functions
rt2x00: Remove ENTRY_TXD_OFDM_RATE
rt2x00: Allow drivers to pass the noise value during rxdone
rt2x00: Introduce RXDONE_SIGNAL_MASK mask
rt2x00: Fix segementation fault
rt2x00: Release rt2x00 2.3.0
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 60 +++-
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++--
drivers/net/wireless/rt2x00/rt2500usb.c | 58 ++++-
drivers/net/wireless/rt2x00/rt2500usb.h | 8 +
drivers/net/wireless/rt2x00/rt2x00.h | 131 +++------
drivers/net/wireless/rt2x00/rt2x00config.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00crypto.c | 13 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 322 ++------------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 87 +++++-
drivers/net/wireless/rt2x00/rt2x00link.c | 461 ++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00mac.c | 42 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 193 ++++++------
drivers/net/wireless/rt2x00/rt2x00queue.h | 15 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 10 +
drivers/net/wireless/rt2x00/rt2x00usb.c | 6 +-
drivers/net/wireless/rt2x00/rt61pci.c | 144 +++++----
drivers/net/wireless/rt2x00/rt61pci.h | 7 +-
drivers/net/wireless/rt2x00/rt73usb.c | 134 ++++++---
drivers/net/wireless/rt2x00/rt73usb.h | 13 +
21 files changed, 1138 insertions(+), 666 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00link.c
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-12-02 17:19 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-12-02 17:19 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a new batch of updates for rt2x00.
The first patch (rt2x00: Optimize IV/EIV handling) was send individually
a few days ago, but it is probably easier if you pull it along with the rest
of the patches during this merge.
Small warning which might be important:
The patch "Implement HW encryption (rt2500usb)" adds support for HW crypto
but it does _not_ activate it. The module parameter "nohwcrypt" is set to 1
by default for now. This code has been sleeping in the rt2x00 experimental branch
for quite some time now, and doesn't work completely. I hope to debug this
further when I have time, but I am hoping that with the code in wireless-testing
other people will take a look at it to see what might be going wrong.
Ivo
---
The following changes since commit ca072018d6425a55b3f0e6d8bd3e6217ee509065:
Winkler, Tomas (1):
iwlwifi: TX update chicken bits
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Optimize IV/EIV handling
rt2x00: Store retry limit values
rt2x00: Remove duplicate code
rt2x00: Implement HW encryption (rt2500usb)
rt2x00: Release rt2x00 2.2.3
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/rt2500usb.c | 132 ++++++++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2500usb.h | 3 +
drivers/net/wireless/rt2x00/rt2x00.h | 9 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 39 +++++----
drivers/net/wireless/rt2x00/rt2x00crypto.c | 56 ++++++------
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 ++
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 -
drivers/net/wireless/rt2x00/rt2x00queue.c | 17 ++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 12 +--
drivers/net/wireless/rt2x00/rt61pci.c | 8 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 +-
12 files changed, 211 insertions(+), 82 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-10-29 16:16 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-10-29 16:16 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Well over a month since my last rt2x00 patches, but finally a real rt2x00 update.
The first 2 patches are updates based on recent mac80211 changes,
especially the configuration patch is important.
I also noticed that the recent Kconfig fixes introduced a possibility of a build error,
not sure if it was reported by somebody yet, but in any case it was possible to
build mac80211 as module and rt2x00 compiled into the kernel, causing obvious
problems.
Ivo
---
The following changes since commit 43288a0fdd6b970dec3017ceaffb70cf6347e5f0:
John W. Linville (1):
ath5k: fixup warnings created by "ath5k: Reset key cache..."
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Optimize configuration handling
rt2x00: Remove ieee80211_bss_conf from rt2x00_intf
rt2x00: Improve interface_modes initialization
rt2x00: Fix build error when mac80211=M rt2x00=Y
rt2x00: Release rt2x00 2.2.2
drivers/net/wireless/rt2x00/Kconfig | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 167 ++++++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 206 ++++++++++++-------------
drivers/net/wireless/rt2x00/rt2500usb.c | 110 ++++++-------
drivers/net/wireless/rt2x00/rt2x00.h | 44 ++----
drivers/net/wireless/rt2x00/rt2x00config.c | 164 +++-----------------
drivers/net/wireless/rt2x00/rt2x00dev.c | 16 ++-
drivers/net/wireless/rt2x00/rt2x00lib.h | 3 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 12 +--
drivers/net/wireless/rt2x00/rt61pci.c | 231 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt73usb.c | 216 +++++++++++++-------------
11 files changed, 501 insertions(+), 670 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-08-29 19:03 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-08-29 19:03 UTC (permalink / raw)
To: John Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is another rt2x00 update for the 2.6.28 kernel,
I believe some patches have been send earlier, but
I lost my overview on my patches, so this bunch will
get rt2x00 completely up to date.
A few patches are needed for rt2800, but they are small,
and clean enough to be merged early.
Ivo
---
The following changes since commit b51f3c6077d59b41e3f9d2af33e2e2f94ecbbc39:
John W. Linville (1):
at76_usb: fix for removal of IEEE80211_TX_CTL_DO_NOT_ENCRYPT
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Fix race conditions in flag handling
rt2x00: Map extra_tx_headroom to DMA
rt2x00: Initialize txop during conf_tx() callback
rt2x00: Add Signal type flag
rt2x00: Release rt2x00 2.2.1
Mattias Nissler (2):
rt2x00: Only configure hardware when radio is enabled
rt2x00: skb->data pointer should not include TX descriptor
drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 7 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 17 +++---
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 68 +++++++++++--------------
drivers/net/wireless/rt2x00/rt2x00mac.c | 75 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt2x00queue.c | 31 +++++++++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 9 ++-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 21 ++++----
drivers/net/wireless/rt2x00/rt61pci.c | 73 ++++++++++++++++++++++-----
drivers/net/wireless/rt2x00/rt73usb.c | 74 ++++++++++++++++++++++-----
13 files changed, 253 insertions(+), 138 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-08-04 14:36 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-08-04 14:36 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Only 5 patches, but they do bump rt2x00 to a new version: 2.2.0
This series will add HW crypto support to rt2x00, by default it
has been enabled for rt61pci and rt73usb.
rt2500usb has also been created, but currently does not work
since it requires different handling then rt61pci and rt73usb. Because
I am focussing on different areas in rt2x00 now, it will take some
time before I get back to rt2500usb HW crypto (if there are any volunteers
to take a shot at rt2500usb HW crypto, they are welcome).
rt2500pci supports HW crypto as well, but I won't implement it due
to the way it has to be enabled. It comes down to the fact that during
TX the key has to be provided, and after the encryption an interupt will
be raised after which the frame can be kicked to the air. In the RX path
the same happens, including that after RX the key has to be provided
as well. This will cause the number of IRQ events to double during HW
crypto, and several changes are required in mac80211 to make it possible.
Because of that I see no point in doing anything with it.
Ivo
----
The following changes since commit 2471b779e2f93d76bd4c041e4a8f5a27c859d7ce:
John W. Linville (1):
Revert "mac80211: add direct probe before association"
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (5):
rt2x00: Implement HW encryption
rt2x00: Implement HW encryption (rt61pci)
rt2x00: Implement HW encryption (rt73usb)
rt2x00: Gather channel information in structure
rt2x00: Release rt2x00 2.2.0
drivers/net/wireless/rt2x00/Kconfig | 6 +
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2400pci.c | 40 ++--
drivers/net/wireless/rt2x00/rt2400pci.h | 22 +--
drivers/net/wireless/rt2x00/rt2500pci.c | 39 +++--
drivers/net/wireless/rt2x00/rt2500pci.h | 17 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 39 +++--
drivers/net/wireless/rt2x00/rt2500usb.h | 17 +-
drivers/net/wireless/rt2x00/rt2x00.h | 64 +++++-
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +
drivers/net/wireless/rt2x00/rt2x00crypto.c | 215 +++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00debug.c | 97 +++++++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 48 +++--
drivers/net/wireless/rt2x00/rt2x00lib.h | 47 ++++
drivers/net/wireless/rt2x00/rt2x00mac.c | 110 +++++++++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 81 +++++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 73 ++++++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 19 ++-
drivers/net/wireless/rt2x00/rt61pci.c | 298 ++++++++++++++++++++++++--
drivers/net/wireless/rt2x00/rt61pci.h | 38 ++--
drivers/net/wireless/rt2x00/rt73usb.c | 314 +++++++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt73usb.h | 38 ++--
22 files changed, 1418 insertions(+), 209 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00crypto.c
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-07-19 14:15 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-07-19 14:15 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the updated patch series,
I have dropped the compile warning patch because Johannes has
already send it before, the EIFS patch has been updated to use the
correct definition instead of hardcoding the value, and some
coding style fixes went into Iwo's patches.
Patches are still intended for 2.6.27
Ivo
---
The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
John W. Linville (1):
iwl-scan.c: fixup merge damage in wireless-testing#master
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (2):
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
Iwo Mergler (3):
rt2x00: Support for large vendor requests
rt2x00: Large vendor requests for rt73usb firmware upload and beacons
rt2x00: Fix the beacon length bug
drivers/net/wireless/rt2x00/rt2500usb.c | 12 ++++++
drivers/net/wireless/rt2x00/rt2x00.h | 5 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
drivers/net/wireless/rt2x00/rt2x00usb.c | 32 +++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 +++++++++++-
drivers/net/wireless/rt2x00/rt73usb.c | 52 +++++++++++----------------
7 files changed, 90 insertions(+), 42 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-07-18 18:43 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest update for rt2x00
I think all patches qualify for 2.6.27,
with the exception for first 2 patches:
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
but those are one-liners and have little impact.
The 3 patches from Iwo are the most important ones,
since that fixes a major bug in the beacon handling for the
USB drivers. The 3 patches are a bit big, but without them
beaconing simply won't work.
Ivo
---
The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
John W. Linville (1):
iwl-scan.c: fixup merge damage in wireless-testing#master
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ ..BRANCH.NOT.VERIFIED..
Ivo van Doorn (3):
rt2x00: Remove duplicate declaration
rt2x00: Fix EIFS timing value
rt2x00: Fix GCC warning because aifs is now unsigned
Iwo Mergler (3):
rt2x00: Support for large vendor requests
rt2x00: Large vendor requests for rt73usb firmware upload and beacons
rt2x00: Fix the beacon length bug
drivers/net/wireless/rt2x00/rt2500usb.c | 12 +++++++
drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
drivers/net/wireless/rt2x00/rt2x00mac.c | 5 +--
drivers/net/wireless/rt2x00/rt2x00usb.c | 33 ++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 ++++++++++++-
drivers/net/wireless/rt2x00/rt73usb.c | 50 ++++++++++++------------------
7 files changed, 87 insertions(+), 44 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2008-07-18 18:43 Ivo van Doorn
@ 2008-07-19 13:55 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-07-19 13:55 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Please wait with pulling from rt2x00.git,
updated patches are coming in a few moments,
I just noticed some cleanups which should be made
in several patches, and I'll incorporate the suggestion
from Johannes regarding the EIFS.
Sorry for the noise. ;)
Ivo
> Here is the latest update for rt2x00
>
> I think all patches qualify for 2.6.27,
> with the exception for first 2 patches:
> rt2x00: Remove duplicate declaration
> rt2x00: Fix EIFS timing value
> but those are one-liners and have little impact.
>
> The 3 patches from Iwo are the most important ones,
> since that fixes a major bug in the beacon handling for the
> USB drivers. The 3 patches are a bit big, but without them
> beaconing simply won't work.
>
> Ivo
>
> ---
> The following changes since commit a520bdbe7d344296482f9355e29b0018ea58760f:
> John W. Linville (1):
> iwl-scan.c: fixup merge damage in wireless-testing#master
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ ..BRANCH.NOT.VERIFIED..
>
> Ivo van Doorn (3):
> rt2x00: Remove duplicate declaration
> rt2x00: Fix EIFS timing value
> rt2x00: Fix GCC warning because aifs is now unsigned
>
> Iwo Mergler (3):
> rt2x00: Support for large vendor requests
> rt2x00: Large vendor requests for rt73usb firmware upload and beacons
> rt2x00: Fix the beacon length bug
>
> drivers/net/wireless/rt2x00/rt2500usb.c | 12 +++++++
> drivers/net/wireless/rt2x00/rt2x00.h | 2 +-
> drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ----
> drivers/net/wireless/rt2x00/rt2x00mac.c | 5 +--
> drivers/net/wireless/rt2x00/rt2x00usb.c | 33 ++++++++++++++++++++
> drivers/net/wireless/rt2x00/rt2x00usb.h | 22 ++++++++++++-
> drivers/net/wireless/rt2x00/rt73usb.c | 50 ++++++++++++------------------
> 7 files changed, 87 insertions(+), 44 deletions(-)
>
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-06-16 17:58 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-06-16 17:58 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the latest version bump of rt2x00: 2.1.8
Most important patches are from Gertjan, which reduce
the amount of pre-allocated DMA for all TX queues.
All PCI drivers now TX/RX all frame data directly
from/to the skb buffer saving kilobytes of allocated DMA
and several memcpy() statements.
This also allows a lot of code to be moved out of rt2x00pci/rt2x00usb
and into rt2x00lib which in turn makes management of everything
much easier.
Ivo
---
The following changes since commit 7b57047e2d34c243c4cf2d778df0b34bfdd82c8e:
John W. Linville (1):
iwlwifi: fix build breakage
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (4):
rt2x00: Properly clean up beacon skbs.
rt2x00: Convert rt2x00 to use generic DMA-mapping API
rt2x00: Centralize allocation of RX skbs.
rt2x00: Replace statically allocated DMA buffers with mapped skb's.
Ivo van Doorn (5):
rt2x00: Use ieee80211 fc handlers
rt2x00: Cleanup symbol exports
rt2x00: Fix sparse warning on nested container_of()
rt2x00: Increase queue size
rt2x00: Release rt2x00 2.1.8
drivers/net/wireless/rt2x00/rt2400pci.c | 17 ++--
drivers/net/wireless/rt2x00/rt2500pci.c | 14 ++-
drivers/net/wireless/rt2x00/rt2500usb.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00.h | 59 ++---------
drivers/net/wireless/rt2x00/rt2x00dev.c | 100 +++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00lib.h | 51 +++++++++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 126 ++++--------------------
drivers/net/wireless/rt2x00/rt2x00pci.h | 12 --
drivers/net/wireless/rt2x00/rt2x00queue.c | 157 +++++++++++++++++++++++------
drivers/net/wireless/rt2x00/rt2x00queue.h | 35 ++++---
drivers/net/wireless/rt2x00/rt2x00usb.c | 94 +++---------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +
drivers/net/wireless/rt2x00/rt61pci.c | 23 +++--
drivers/net/wireless/rt2x00/rt73usb.c | 8 ++-
14 files changed, 368 insertions(+), 338 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-06-08 21:41 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-06-08 21:41 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the official pull request for the latest rt2x00.git.
This contains all patches which I had send last tuesday
plus some additional patches intended for 2.6.27.
This series is mostly intended to get the fragmentation
done right. Up until now the drivers never behaved that
nicely with fragmentation or RTS/CTS-to-sellf which was
mostly due because each individual frame forced the
queue to be kicked immediately without waiting for the
other fragments.
It also contains some front work by Gertjan for reducing
DMA requirements in rt2x00 by making use of pci_map_single
on skbuffers instead of preallocating a chunk of DMA.
Ivo
P.S. I won't resend the patches I had send last tuesday
since nothing has changed with them. So only the 10
new patches will be send seperately. I am not sure
if that feature will be ready/stable for 2.6.27 but this
preperational work is harmless for normal operations
to it is better if that is already in.
---
The following changes since commit ef28eab0c928fe8277d7c3dca234c29f734d7f2e:
Dan Williams (1):
ipw2200: queue direct scans
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (5):
rt2x00: Restrict DMA to 32-bit addresses.
rt2x00: Cleanup struct skb_frame_desc.
rt2x00: Centralize RX packet alignment handling in rt2x00lib.
rt2x00: Fix double usage of skb->cb in USB RX path.
rt2x00: Rework alignment check.
Ivo van Doorn (15):
rt2x00: Calculate register offset during compile time
rt2x00: Cleanup/optimize set_state() function callback function
rt2x00: Move led initialization into function
rt2x00: Remove CTS/RTS check in tx()
rt2x00: Removed unused descriptor read in txdone
rt2x00: Don't kill guardian_urb when it wasn't created
rt2x00: Make rt2x00_set/get_field macros
rt2x00: Release rt2x00 2.1.7
rt2x00: Fix queue initialization
rt2x00: Implement rt2x00usb_kick_tx_queue()
rt2x00: Move generic TX frame writing code into rt2x00queue
rt2x00: Don't kick TX queue after each frame
rt2x00: Use __builtin_choose_expr() instead of ?:
rt2x00: Clear IEEE80211_TX_CTL_USE_RTS_CTS flag for RTS frame
rt2x00: Remove unused defines
drivers/net/wireless/rt2x00/rt2400pci.c | 95 ++++++++---------
drivers/net/wireless/rt2x00/rt2400pci.h | 2 -
drivers/net/wireless/rt2x00/rt2500pci.c | 91 +++++++--------
drivers/net/wireless/rt2x00/rt2500pci.h | 2 -
drivers/net/wireless/rt2x00/rt2500usb.c | 98 ++++++++--------
drivers/net/wireless/rt2x00/rt2500usb.h | 2 -
drivers/net/wireless/rt2x00/rt2x00.h | 13 ++-
drivers/net/wireless/rt2x00/rt2x00debug.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 21 ++++
drivers/net/wireless/rt2x00/rt2x00lib.h | 1 +
drivers/net/wireless/rt2x00/rt2x00mac.c | 30 ++----
drivers/net/wireless/rt2x00/rt2x00pci.c | 75 ++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 11 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 111 ++++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00queue.h | 27 +++--
drivers/net/wireless/rt2x00/rt2x00reg.h | 134 +++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00usb.c | 170 +++++++++++------------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 22 +++-
drivers/net/wireless/rt2x00/rt61pci.c | 111 ++++++++-----------
drivers/net/wireless/rt2x00/rt61pci.h | 2 -
drivers/net/wireless/rt2x00/rt73usb.c | 112 +++++++++----------
drivers/net/wireless/rt2x00/rt73usb.h | 2 -
22 files changed, 581 insertions(+), 557 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-10 11:37 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel, Johannes Berg
Hi John,
Here is a new rt2x00 release.
Please note that some patches have been send individually to linux-wireless before,
(including the 2 mac80211 patches) but for completeness I have added them to
this pull request.
This will bump rt2x00 to version 2.1.6, most patches are only intended to make
room for future patches like the mac80211 patch series from Johannes, HW crypto
and pci drivers without a preallocated big chunk of DMA.
Ivo
---
The following changes since commit d30d1674356e223c9f2c164ac9d0be35af8ee4e0:
Johannes Berg (1):
mac80211: fix wme code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (3):
rt2x00: Clean up error handling of PCI queue DMA allocation.
rt2x00: Fix queue related oops in case of deselected mac80211 multi-queue feature.
rt2x00: Only initialize the minimum needed fields of PCI TX descriptors.
Ivo van Doorn (13):
rt2x00: Don't use pskb_expand_head()
rt2x00: Fix broken recover-on-error path
mac80211: Don't encrypt beacons
mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
rt2x00: trim skb_frame_desc to 32 bytes
rt2x00: Fix TX status reporting
rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()
rt2x00: Preserve descriptor information after memmove()
rt2x00: Split rt2x00lib_write_tx_desc()
rt2x00: Remove redundant flags/dev_flags initializations
rt2x00: Merge RX and TX entry private data
rt2x00: Remove extra +
rt2x00: Release rt2x00 2.1.6
drivers/net/wireless/rt2x00/rt2400pci.c | 126 +++++++++-------
drivers/net/wireless/rt2x00/rt2400pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500pci.c | 114 ++++++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 5 +
drivers/net/wireless/rt2x00/rt2500usb.c | 78 +++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +
drivers/net/wireless/rt2x00/rt2x00.h | 48 +++++--
drivers/net/wireless/rt2x00/rt2x00debug.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 190 +++---------------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 105 +++++--------
drivers/net/wireless/rt2x00/rt2x00pci.h | 22 +---
drivers/net/wireless/rt2x00/rt2x00queue.c | 165 ++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 45 ++++--
drivers/net/wireless/rt2x00/rt2x00reg.h | 11 --
drivers/net/wireless/rt2x00/rt2x00usb.c | 228 +++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2x00usb.h | 17 +--
drivers/net/wireless/rt2x00/rt61pci.c | 146 ++++++++++---------
drivers/net/wireless/rt2x00/rt61pci.h | 5 +
drivers/net/wireless/rt2x00/rt73usb.c | 53 ++++----
drivers/net/wireless/rt2x00/rt73usb.h | 5 +
include/net/mac80211.h | 25 +++-
net/mac80211/tx.c | 1 +
net/mac80211/util.c | 37 +++++-
25 files changed, 794 insertions(+), 654 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 11:37 Ivo van Doorn
@ 2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: drago01 @ 2008-05-10 12:48 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> Hi John,
>
> Here is a new rt2x00 release.
> Please note that some patches have been send individually to linux-wireless before,
> (including the 2 mac80211 patches) but for completeness I have added them to
> this pull request.
>
> This will bump rt2x00 to version 2.1.6, most patches are only intended to make
> room for future patches like the mac80211 patch series from Johannes, HW crypto
> and pci drivers without a preallocated big chunk of DMA.
>
> Ivo
whats the current status of rt2860 support?
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 12:48 ` drago01
@ 2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-10 13:06 UTC (permalink / raw)
To: drago01; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Saturday 10 May 2008, drago01 wrote:
> On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> > Hi John,
> >
> > Here is a new rt2x00 release.
> > Please note that some patches have been send individually to linux-wireless before,
> > (including the 2 mac80211 patches) but for completeness I have added them to
> > this pull request.
> >
> > This will bump rt2x00 to version 2.1.6, most patches are only intended to make
> > room for future patches like the mac80211 patch series from Johannes, HW crypto
> > and pci drivers without a preallocated big chunk of DMA.
> >
> > Ivo
>
> whats the current status of rt2860 support?
Under development.
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-10 13:06 ` Ivo van Doorn
@ 2008-05-10 13:15 ` drago01
0 siblings, 0 replies; 65+ messages in thread
From: drago01 @ 2008-05-10 13:15 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linville, linux-wireless, rt2400-devel, Johannes Berg
On Sat, May 10, 2008 at 3:06 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
> On Saturday 10 May 2008, drago01 wrote:
>> On Sat, May 10, 2008 at 1:37 PM, Ivo van Doorn <ivdoorn@gmail.com> wrote:
>> > Hi John,
>> >
>> > Here is a new rt2x00 release.
>> > Please note that some patches have been send individually to linux-wireless before,
>> > (including the 2 mac80211 patches) but for completeness I have added them to
>> > this pull request.
>> >
>> > This will bump rt2x00 to version 2.1.6, most patches are only intended to make
>> > room for future patches like the mac80211 patch series from Johannes, HW crypto
>> > and pci drivers without a preallocated big chunk of DMA.
>> >
>> > Ivo
>>
>> whats the current status of rt2860 support?
>
> Under development.
well ok ;)
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-05-05 15:23 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-05 15:23 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here are 3 patches for rt2x00, they are all intended for 2.6.26 since
they fix serious bugs. Patch 1 should prevent problems as reported by
Johannes Berg regarding skb->truesize by removing the only pskb_expand_head()
call in rt2x00 (and use a already existing buffer instead).
Patches 2 and 3 fix problems when DMA allocation fails, that usually doesn't happen,
hence the reason these problems have gone unnoticed for so long. :S
Ivo
---
The following changes since commit 0bacadffc86bcba2fdf2b989afc286a8184664a0:
Ivo van Doorn (1):
rt2x00: Fix quality/activity led handling
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Gertjan van Wingerde (1):
rt2x00: Clean up error handling of PCI queue DMA allocation.
Ivo van Doorn (2):
rt2x00: Don't use pskb_expand_head()
rt2x00: Fix broken recover-on-error path
drivers/net/wireless/rt2x00/rt2x00dev.c | 11 ++++-------
drivers/net/wireless/rt2x00/rt2x00pci.c | 5 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 31 +++++++++++--------------------
3 files changed, 18 insertions(+), 29 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
@ 2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-05 17:31 ` John W. Linville
0 siblings, 2 replies; 65+ messages in thread
From: Scott White @ 2008-05-02 21:04 UTC (permalink / raw)
To: linux-wireless
>Was this patch series in time for the 2.6.26 merge window?
>
>If not, please consider merging at least the following patches since
>they are real bugfixes:
>
>> rt2x00: Don't enable short preamble for 1MBs
>> rt2x00: Fix quality/activity led handling
>> rt2x00: Clarify supported chipsets in Kconfig
>
>The others are code cleanups which are "nice to have", but could otherwise
>wait for 2.6.27.
The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
Thanks,
_________________________________________________________________
Windows Live SkyDrive lets you share files with faraway friends.
http://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refresh_skydrive_052008
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:04 Scott White
@ 2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
1 sibling, 2 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-02 21:25 UTC (permalink / raw)
To: Scott White; +Cc: linux-wireless
On Friday 02 May 2008, Scott White wrote:
>
> >Was this patch series in time for the 2.6.26 merge window?
> >
> >If not, please consider merging at least the following patches since
> >they are real bugfixes:
> >
> >> rt2x00: Don't enable short preamble for 1MBs
> >> rt2x00: Fix quality/activity led handling
> >> rt2x00: Clarify supported chipsets in Kconfig
> >
> >The others are code cleanups which are "nice to have", but could otherwise
> >wait for 2.6.27.
>
> The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
It seems to have helped with several other users.
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:25 ` Ivo van Doorn
@ 2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
1 sibling, 1 reply; 65+ messages in thread
From: Mattias Nissler @ 2008-05-03 6:19 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Scott White, linux-wireless
On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> On Friday 02 May 2008, Scott White wrote:
> >
> > >Was this patch series in time for the 2.6.26 merge window?
> > >
> > >If not, please consider merging at least the following patches since
> > >they are real bugfixes:
> > >
> > >> rt2x00: Don't enable short preamble for 1MBs
> > >> rt2x00: Fix quality/activity led handling
> > >> rt2x00: Clarify supported chipsets in Kconfig
> > >
> > >The others are code cleanups which are "nice to have", but could otherwise
> > >wait for 2.6.27.
> >
> > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
>
> Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> It seems to have helped with several other users.
For rt73? IIRC the rate selection algo does not work at all for that
device, because we cannot report failed frames. Or have you done
anything about that I might have missed, Ivo? If not, the rate is
probably fixed at 54Mbit anyway.
Mattias
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 6:19 ` Mattias Nissler
@ 2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-03 9:58 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Scott White, linux-wireless
On Saturday 03 May 2008, Mattias Nissler wrote:
> On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> > On Friday 02 May 2008, Scott White wrote:
> > >
> > > >Was this patch series in time for the 2.6.26 merge window?
> > > >
> > > >If not, please consider merging at least the following patches since
> > > >they are real bugfixes:
> > > >
> > > >> rt2x00: Don't enable short preamble for 1MBs
> > > >> rt2x00: Fix quality/activity led handling
> > > >> rt2x00: Clarify supported chipsets in Kconfig
> > > >
> > > >The others are code cleanups which are "nice to have", but could otherwise
> > > >wait for 2.6.27.
> > >
> > > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
> >
> > Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> > It seems to have helped with several other users.
>
> For rt73? IIRC the rate selection algo does not work at all for that
> device, because we cannot report failed frames. Or have you done
> anything about that I might have missed, Ivo? If not, the rate is
> probably fixed at 54Mbit anyway.
Well I didn't do anything new, but this line will report rt2x00lib that the
frame was succesfully send or failed to send:
txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
What is missing is the retry count, since that is something that
the USB drivers cannot report. (Unless I grab the max retry count
as configured by mac80211 as the number of retries on failure)
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 9:58 ` Ivo van Doorn
@ 2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Mattias Nissler @ 2008-05-03 10:18 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Scott White, linux-wireless
On Sat, 2008-05-03 at 11:58 +0200, Ivo van Doorn wrote:
> On Saturday 03 May 2008, Mattias Nissler wrote:
> > On Fri, 2008-05-02 at 23:25 +0200, Ivo van Doorn wrote:
> > > On Friday 02 May 2008, Scott White wrote:
> > > >
> > > > >Was this patch series in time for the 2.6.26 merge window?
> > > > >
> > > > >If not, please consider merging at least the following patches since
> > > > >they are real bugfixes:
> > > > >
> > > > >> rt2x00: Don't enable short preamble for 1MBs
> > > > >> rt2x00: Fix quality/activity led handling
> > > > >> rt2x00: Clarify supported chipsets in Kconfig
> > > > >
> > > > >The others are code cleanups which are "nice to have", but could otherwise
> > > > >wait for 2.6.27.
> > > >
> > > > The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
> > >
> > > Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> > > It seems to have helped with several other users.
> >
> > For rt73? IIRC the rate selection algo does not work at all for that
> > device, because we cannot report failed frames. Or have you done
> > anything about that I might have missed, Ivo? If not, the rate is
> > probably fixed at 54Mbit anyway.
>
> Well I didn't do anything new, but this line will report rt2x00lib that the
> frame was succesfully send or failed to send:
> txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
> What is missing is the retry count, since that is something that
> the USB drivers cannot report. (Unless I grab the max retry count
> as configured by mac80211 as the number of retries on failure)
Well, I have just put my rt73 into a metal box. Many frames do fail,
only very few get through pinging my AP. The rate control still keeps
the rate at 54Mbit/s :-) So it seems neither excessive_retries nor the
retry_count in the tx_status struct is set at all.
Mattias
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 10:18 ` Mattias Nissler
@ 2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-03 15:02 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Scott White, linux-wireless
> > > For rt73? IIRC the rate selection algo does not work at all for that
> > > device, because we cannot report failed frames. Or have you done
> > > anything about that I might have missed, Ivo? If not, the rate is
> > > probably fixed at 54Mbit anyway.
> >
> > Well I didn't do anything new, but this line will report rt2x00lib that the
> > frame was succesfully send or failed to send:
> > txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
> > What is missing is the retry count, since that is something that
> > the USB drivers cannot report. (Unless I grab the max retry count
> > as configured by mac80211 as the number of retries on failure)
>
> Well, I have just put my rt73 into a metal box. Many frames do fail,
> only very few get through pinging my AP. The rate control still keeps
> the rate at 54Mbit/s :-) So it seems neither excessive_retries nor the
> retry_count in the tx_status struct is set at all.
Hmm, perhaps we need some way the driver can inform the rate selection
module about statistics. I mean the hardware does measure the number
of failed TX frames, and the number of retries, but it doesn't set them
in the descriptor but in the hardware.
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:02 ` Ivo van Doorn
@ 2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
0 siblings, 1 reply; 65+ messages in thread
From: Johannes Berg @ 2008-05-03 15:27 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: Mattias Nissler, Scott White, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 305 bytes --]
> Hmm, perhaps we need some way the driver can inform the rate selection
> module about statistics. I mean the hardware does measure the number
> of failed TX frames, and the number of retries, but it doesn't set them
> in the descriptor but in the hardware.
Yes we should have this.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:27 ` Johannes Berg
@ 2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Mattias Nissler @ 2008-05-03 15:38 UTC (permalink / raw)
To: Johannes Berg; +Cc: Ivo van Doorn, Scott White, linux-wireless
On Sat, 2008-05-03 at 17:27 +0200, Johannes Berg wrote:
> > Hmm, perhaps we need some way the driver can inform the rate selection
> > module about statistics. I mean the hardware does measure the number
> > of failed TX frames, and the number of retries, but it doesn't set them
> > in the descriptor but in the hardware.
>
> Yes we should have this.
New rate control algorithm probably. Or even better: Split what is
currently the rate control algorithm into an link quality estimation
part (failed frames percentage and such) and the actual rate control
that interprets that value and acts accordingly.
Mattias
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-03 15:38 ` Mattias Nissler
@ 2008-05-03 16:56 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-03 16:56 UTC (permalink / raw)
To: Mattias Nissler; +Cc: Johannes Berg, Scott White, linux-wireless
On Saturday 03 May 2008, Mattias Nissler wrote:
> On Sat, 2008-05-03 at 17:27 +0200, Johannes Berg wrote:
> > > Hmm, perhaps we need some way the driver can inform the rate selection
> > > module about statistics. I mean the hardware does measure the number
> > > of failed TX frames, and the number of retries, but it doesn't set them
> > > in the descriptor but in the hardware.
> >
> > Yes we should have this.
>
> New rate control algorithm probably. Or even better: Split what is
> currently the rate control algorithm into an link quality estimation
> part (failed frames percentage and such) and the actual rate control
> that interprets that value and acts accordingly.
Hmm, splitting that up would be nice, especially when the driver
will have access to those failed frame percentages directly.
rt2x00 currently keeps track of these statistics to perform link tuning,
I wouldn't be surprised if other drivers also keep similar statistics for
the same reason.
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* RE: Please pull 'upstream' branch of rt2x00
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
@ 2008-05-03 19:29 ` Scott White
1 sibling, 0 replies; 65+ messages in thread
From: Scott White @ 2008-05-03 19:29 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linux-wireless
> To: nwi_sub@hotmail.com
> Subject: Re: Please pull 'upstream' branch of rt2x00
> Date: Fri, 2 May 2008 23:25:38 +0200
> CC: linux-wireless@vger.kernel.org
> From: ivdoorn@gmail.com
>
> On Friday 02 May 2008, Scott White wrote:
>>
>>>Was this patch series in time for the 2.6.26 merge window?
>>>
>>>If not, please consider merging at least the following patches since
>>>they are real bugfixes:
>>>
>>>> rt2x00: Don't enable short preamble for 1MBs
>>>> rt2x00: Fix quality/activity led handling
>>>> rt2x00: Clarify supported chipsets in Kconfig
>>>
>>>The others are code cleanups which are "nice to have", but could otherwise
>>>wait for 2.6.27.
>>
>> The merge window is still open at this time. I haven't seen a rc1 yet. Anyway I saw that only the 3 bugfixes are currently in the queue. As the owner of several (10 by the university and 2 personal) rt73 usb wireless cards, I would really like it if the latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24 and finished compiling 2.6.25 two days ago I find that the driver in both kernels is not good. Not good means I get a wireless signal and I get data transfers, but the speed fluctuates and have other issues. However with each release, the problems I have are slowing decreasing. I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5 was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
>
> Have you tried forcing the rate to 54Mbit instead of letting the rate selection algorithm doing its work?
> It seems to have helped with several other users.
>
> Ivo
No I haven't tried that. However I have 54Mbit (g) at home, but only 11Mbit (b only) at work. I guess I would have to change the rate when I change locations.
Thanks,
_________________________________________________________________
Make Windows Vista more reliable and secure with Windows Vista Service Pack 1.
http://www.windowsvista.com/SP1?WT.mc_id=hotmailvistasp1banner
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
@ 2008-05-05 17:31 ` John W. Linville
1 sibling, 0 replies; 65+ messages in thread
From: John W. Linville @ 2008-05-05 17:31 UTC (permalink / raw)
To: Scott White; +Cc: linux-wireless
On Fri, May 02, 2008 at 04:04:52PM -0500, Scott White wrote:
>
> >Was this patch series in time for the 2.6.26 merge window?
> >
> >If not, please consider merging at least the following patches since
> >they are real bugfixes:
> >
> >> rt2x00: Don't enable short preamble for 1MBs
> >> rt2x00: Fix quality/activity led handling
> >> rt2x00: Clarify supported chipsets in Kconfig
> >
> >The others are code cleanups which are "nice to have", but could otherwise
> >wait for 2.6.27.
>
> The merge window is still open at this time. I haven't seen
> a rc1 yet. Anyway I saw that only the 3 bugfixes are currently
> in the queue. As the owner of several (10 by the university and
> 2 personal) rt73 usb wireless cards, I would really like it if the
> latest version 2.1.5 made into 2.6.26. As someone who has used 2.6.24
> and finished compiling 2.6.25 two days ago I find that the driver in
> both kernels is not good. Not good means I get a wireless signal and
> I get data transfers, but the speed fluctuates and have other issues.
> However with each release, the problems I have are slowing decreasing.
> I have been waiting patiently for 2.6.25-rc1 to have 2.1.5 since 2.1.5
> was announced. I really think all of 2.1.5 should get in 2.6.25-rc1.
I'm sorry, but this isn't how the merge window is used. The merge
window is for merging code that is _already_ pending when the
window opens. No one should wait for the merge window to open before
sending code to the upstream maintainers. (I'm not suggesting that
Ivo delayed on purpose, I'm just stating the policy.)
Anything that fixes an actual bug can still go to 2.6.26 over the
next several weeks. But code that is simply new development will
have to wait for 2.6.27's merge window before it gets to Linus.
Thanks,
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2008-04-21 17:06 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Finally a new official rt2x00 release,
off course I have send a lot of patches over the past few weeks
with several bugfixes, but now I am bumping the versions to 2.1.5.
Please consider this patch series for the 2.6.26 kernel,
they are all either bugfixes or minor cleanups.
with the exception of "[PATCH 4/9] rt2x00: Use rt2x00 queue numbering"
which besides a cleanup will also help with the pending mac80211
queue reorganization to QDisc.
Ivo
PS. Don't be alarmed over the "The following changes since commit"
line below which indicates "mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE"
is used as basis. That patch is _not_ present in the rt2x00.git upstream branch
and none of the following patches depend on that patch.
---
The following changes since commit c8b29c460a389a8561189ad2a77fcb697ef35df9:
Ivo van Doorn (1):
mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Support hardware RTS and CTS-to-self frames
rt2x00: Remove DRIVER_SUPPORT_MIXED_INTERFACES
rt2x00: Don't enable short preamble for 1MBs
rt2x00: Use rt2x00 queue numbering
rt2x00: Fix quality/activity led handling
rt2x00: Clarify supported chipsets in Kconfig
rt2x00: Add helper macros
rt2x00: Fix kernel-doc
rt2x00: Release rt2x00 2.1.5
drivers/net/wireless/rt2x00/Kconfig | 55 +++++++++++++++++------------
drivers/net/wireless/rt2x00/rt2400pci.c | 36 +++++++------------
drivers/net/wireless/rt2x00/rt2500pci.c | 39 +++++++-------------
drivers/net/wireless/rt2x00/rt2500usb.c | 22 ++++-------
drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++-----
drivers/net/wireless/rt2x00/rt2x00dev.c | 5 ++-
drivers/net/wireless/rt2x00/rt2x00leds.c | 15 ++++++++
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +++
drivers/net/wireless/rt2x00/rt2x00mac.c | 31 +++++++++-------
drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 6 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 6 ++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 40 +++++++++++++-------
drivers/net/wireless/rt2x00/rt2x00usb.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 21 +++++++++--
drivers/net/wireless/rt2x00/rt61pci.c | 29 +++++----------
drivers/net/wireless/rt2x00/rt73usb.c | 35 +++++++-----------
17 files changed, 191 insertions(+), 179 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2008-04-21 17:06 Ivo van Doorn
@ 2008-05-01 8:29 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-05-01 8:29 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
> Finally a new official rt2x00 release,
> off course I have send a lot of patches over the past few weeks
> with several bugfixes, but now I am bumping the versions to 2.1.5.
>
> Please consider this patch series for the 2.6.26 kernel,
Was this patch series in time for the 2.6.26 merge window?
If not, please consider merging at least the following patches since
they are real bugfixes:
> rt2x00: Don't enable short preamble for 1MBs
> rt2x00: Fix quality/activity led handling
> rt2x00: Clarify supported chipsets in Kconfig
The others are code cleanups which are "nice to have", but could otherwise
wait for 2.6.27.
> rt2x00: Support hardware RTS and CTS-to-self frames
> rt2x00: Remove DRIVER_SUPPORT_MIXED_INTERFACES
> rt2x00: Use rt2x00 queue numbering
> rt2x00: Add helper macros
> rt2x00: Fix kernel-doc
> rt2x00: Release rt2x00 2.1.5
Thanks,
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-03-09 21:37 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-03-09 21:37 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
This is the latest version of rt2x00: 2.1.4
All drivers are now showing excellent progress, rt2400pci, rt2500pci, rt61pci and rt73usb
seem to be working as expected now. And only rt2500usb is spoiling things by having
only a working RX but no TX.
After this patch series, it is highly likely you can close a lot of rt2x00 related bugs
in the Fedora bugzilla. :)
Ivo
---
The following changes since commit 4f739cf30891f277a6353d61275489528fab64e3:
Pavel Roskin (1):
at76_usb: make the driver depend on MAC80211
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (2):
rt2x00: never disable multicast because it disables broadcast too
rt2x00:correct rx packet length for USB devices
Ivo van Doorn (18):
rt2x00: Align RX descriptor to 4 bytes
rt2x00: Don't use uninitialized desc_len
rt2x00: Use skbdesc fields for descriptor initialization
rt2x00: Add new D-Link USB ID
rt2x00: Only disable beaconing just before beacon update
rt2x00: Upgrade queue->lock to use irqsave
rt2x00: Move firmware checksumming to driver
rt2x00: Start bugging when rt2x00lib doesn't filter SW diversity
rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flag
rt2x00: Rename config_preamble() to config_erp()
rt2x00: Add suspend/resume handlers to rt2x00rfkill
rt2x00: Make rt2x00leds_register return void
rt2x00: Always enable TSF ticking
rt2x00: Fix basic rate initialization
rt2x00: Fix compile error when rfkill is disabled
rt2x00: Fix RX DMA ring initialization
rt2x00: Fix rt2400pci signal
rt2x00: Release rt2x00 2.1.4
Luis Correia (1):
rt2x00: Fix trivial log message
Mattias Nissler (3):
rt2x00: Initialize TX control field in data entries
rt2x00: Use the correct size when copying the control info in txdone
rt2x00: Don't use unitialized rxdesc->size
drivers/net/wireless/rt2x00/Kconfig | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 67 +++++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 71 ++++++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 97 ++++++++++---------
drivers/net/wireless/rt2x00/rt2x00.h | 31 ++++--
drivers/net/wireless/rt2x00/rt2x00config.c | 62 +++++++-----
drivers/net/wireless/rt2x00/rt2x00debug.c | 5 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 108 +++++++++------------
drivers/net/wireless/rt2x00/rt2x00firmware.c | 34 +-------
drivers/net/wireless/rt2x00/rt2x00leds.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 45 ++++-----
drivers/net/wireless/rt2x00/rt2x00mac.c | 22 +++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 1 +
drivers/net/wireless/rt2x00/rt2x00queue.c | 17 ++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 3 +
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 116 +++++++++++++++--------
drivers/net/wireless/rt2x00/rt2x00usb.c | 19 ++++-
drivers/net/wireless/rt2x00/rt61pci.c | 104 ++++++++++++--------
drivers/net/wireless/rt2x00/rt73usb.c | 131 +++++++++++++++-----------
20 files changed, 524 insertions(+), 426 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-02-25 22:20 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-25 22:20 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.3 release of rt2x00.
Most bugfixes concentrate on the link tuner issues reported for
the rt2x00 2.0.14 version inside kernel 2.6.25.
One additional fix for rt61pci is present where the recent
"mode->band" changes in mac80211 contained a bug for rt61pci.
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2008-02-10 21:46 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-10 21:46 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a quick followup release labeled 2.1.1. The previous release
contained many bugs as it was mostly untested. Result was there
were critical issues with it, of which some have now been fixed.
The most critical issues are random panics due to corrupt memory access,
at the moment none of the drivers are displaying any activity yet where
rt73usb is still crashing at random times.
Ivo
---
The following changes since commit d86916b7d36c4f0db8634fcc17fe2d747b317f17:
John W. Linville (1):
Merge branch 'at76' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: correct address calc for queue private data
Ivo van Doorn (13):
rt2x00: Fix invalid DMA free
rt2x00: Make rt2x00 less verbose
rt2x00: Remove MGMT ring initialization
rt2x00: Select CONFIG_NEW_LEDS
rt2x00: make csr_cache and csr_addr an union
rt2x00: Fix scheduling while atomic errors in usb drivers
rt2x00: Add queue statistics to debugfs
rt2x00: Fix typo in debug statement
rt2x00: Fix skbdesc->data_len initialization
rt2x00: Fix queue->qid initialization
rt2x00: Cleanup Makefile
rt2x00: Kill guardian urb during disable_radio
rt2x00: Release rt2x00 2.1.1
drivers/net/wireless/rt2x00/Kconfig | 1 +
drivers/net/wireless/rt2x00/Makefile | 41 +++++-------
drivers/net/wireless/rt2x00/rt2400pci.c | 4 -
drivers/net/wireless/rt2x00/rt2500pci.c | 4 -
drivers/net/wireless/rt2x00/rt2500usb.c | 6 +--
drivers/net/wireless/rt2x00/rt2x00.h | 12 ++--
drivers/net/wireless/rt2x00/rt2x00debug.c | 90 ++++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00mac.c | 9 +++-
drivers/net/wireless/rt2x00/rt2x00pci.c | 99 +++++++++++++++++++---------
drivers/net/wireless/rt2x00/rt2x00pci.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 36 ++++++-----
drivers/net/wireless/rt2x00/rt2x00usb.c | 37 ++++++++---
drivers/net/wireless/rt2x00/rt61pci.c | 8 +--
drivers/net/wireless/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 +--
15 files changed, 231 insertions(+), 134 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-02-03 14:41 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-02-03 14:41 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.1.0 release of rt2x00.
The most important changes in this release:
- Queue handling overhaul
- Multiple virtual AP interfaces support for rt61 and rt73
- LED class support
- Adhoc & master mode enabled
Note that this patch series is _not_ intended for 2.6.25,
a lot might still be broken because the code has changed so much.
Adhoc and master mode is only enabled for testing purposes, in no way
it means that it is working for all drivers...
With these changes adding support for rt2800pci and rt2800usb will
be easier as well. Hopefully I can soon provide an initial version for
those 2 drivers as well.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.1.0/
Ivo
---
The following changes since commit e0e6138382c56aa99a1aabe5dddddbb332b5a4f8:
Stefano Brivio (1):
rc80211-pid: fix rate adjustment
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: don't write past the end when writing short descriptors on rt61
Ivo van Doorn (18):
rt2x00: Update copyright notice
rt2x00: Queue handling overhaul
rt2x00: Add new USB ID to rt2500usb
rt2x00: Fix tx parameter initialization
rt2x00: Enable master and adhoc mode again
rt2x00: Driver requiring firmware should select crc algo
rt2x00: Add per-interface structure
rt2x00: Rate structure overhaul
rt2x00: Remove HWMODE_{A,B,G}
rt2x00: Remove TX_MGMT queue usage
rt2x00: Initialize QID from queue->qid
rt2x00: Use ieee80211_channel_to_frequency()
rt2x00: Make use of MAC80211_LED_TRIGGERS
rt2x00: Enable LED class support for rt2500usb/rt73usb
rt2x00: Fix rate initialization
rt2x00: Move beacon and atim queue defines into rt2x00
rt2x00: Fix queue index handling
rt2x00: Release rt2x00 2.1.0
drivers/net/wireless/rt2x00/Kconfig | 43 ++
drivers/net/wireless/rt2x00/Makefile | 6 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 431 +++++++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 436 +++++++++------
drivers/net/wireless/rt2x00/rt2500pci.h | 2 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 497 ++++++++++--------
drivers/net/wireless/rt2x00/rt2500usb.h | 5 +-
drivers/net/wireless/rt2x00/rt2x00.h | 288 ++++++-----
drivers/net/wireless/rt2x00/rt2x00config.c | 140 +++---
drivers/net/wireless/rt2x00/rt2x00debug.c | 34 +-
drivers/net/wireless/rt2x00/rt2x00debug.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 756 +++++++++++---------------
drivers/net/wireless/rt2x00/rt2x00dump.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00firmware.c | 43 ++-
drivers/net/wireless/rt2x00/rt2x00leds.c | 217 ++++++++
drivers/net/wireless/rt2x00/rt2x00leds.h | 63 +++
drivers/net/wireless/rt2x00/rt2x00lib.h | 100 ++++-
drivers/net/wireless/rt2x00/rt2x00mac.c | 221 +++++---
drivers/net/wireless/rt2x00/rt2x00pci.c | 238 ++++-----
drivers/net/wireless/rt2x00/rt2x00pci.h | 57 ++-
drivers/net/wireless/rt2x00/rt2x00queue.c | 295 ++++++++++
drivers/net/wireless/rt2x00/rt2x00queue.h | 447 +++++++++++++++
drivers/net/wireless/rt2x00/rt2x00reg.h | 75 +---
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 290 ----------
drivers/net/wireless/rt2x00/rt2x00usb.c | 345 ++++++++-----
drivers/net/wireless/rt2x00/rt2x00usb.h | 179 +++++--
drivers/net/wireless/rt2x00/rt61pci.c | 601 +++++++++++----------
drivers/net/wireless/rt2x00/rt61pci.h | 21 +-
drivers/net/wireless/rt2x00/rt73usb.c | 468 +++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 20 +-
32 files changed, 3831 insertions(+), 2501 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00leds.c
create mode 100644 drivers/net/wireless/rt2x00/rt2x00leds.h
create mode 100644 drivers/net/wireless/rt2x00/rt2x00queue.c
create mode 100644 drivers/net/wireless/rt2x00/rt2x00queue.h
delete mode 100644 drivers/net/wireless/rt2x00/rt2x00ring.h
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2008-01-06 22:37 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2008-01-06 22:37 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the 2.0.14 release of rt2x00. Again lots of bugfixes,
and unfortunately we are still not there yet. I am afraid
rt2500usb and rt61pci are lost causes for the 2.6.24 release,
they are both broken, and I haven't figured out what is causing
this.
Next release will contain more interesting stuff, most of those
patches are already done, but due to testing and fine tuning I
have kept those patches back for this release. They primarily
cover basic support for virtual interfaces, led triggers, and some
first patches to make rt2x00lib support rt2800 (Yes, work on those
drivers has begun).
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.14/
Ivo
---
The following changes since commit 2d0811f5ed506397d85792abfd8ef0983f4e8b7c:
John W. Linville (1):
fixup 'everything' after 'upstream-davem' rebase and patch modification
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (12):
rt2x00: Fix chipset debugfs file
rt2x00: Always call ieee80211_stop_queue() when return NETDEV_TX_BUSY
rt2x00: Only set the TBCN flag when the interface is configured to send beacons.
rt2x00: Store queue idx and entry idx in data_ring and data_entry
rt2x00: Move start() and stop() handlers into rt2x00lib.c
rt2x00: Put 802.11 data on 4 byte boundary
rt2x00: Move packet filter flags
rt2x00: Cleanup write_tx_desc() arguments
rt2x00: Determine MY_BSS from descriptor
rt2x00: Move init_txring and init_rxring into rt2x00lib
rt2x00: Correctly initialize data and desc pointer
rt2x00: Release rt2x00 2.0.14
drivers/net/wireless/rt2x00/rt2400pci.c | 102 +++++++--------------
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 36 +++++---
drivers/net/wireless/rt2x00/rt2x00.h | 32 ++++---
drivers/net/wireless/rt2x00/rt2x00debug.c | 13 +--
drivers/net/wireless/rt2x00/rt2x00dev.c | 142 ++++++++++++++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 59 +++---------
drivers/net/wireless/rt2x00/rt2x00pci.c | 28 ++++--
drivers/net/wireless/rt2x00/rt2x00ring.h | 13 +++
drivers/net/wireless/rt2x00/rt2x00usb.c | 87 ++++++++----------
drivers/net/wireless/rt2x00/rt2x00usb.h | 5 +-
drivers/net/wireless/rt2x00/rt61pci.c | 114 +++++++++---------------
drivers/net/wireless/rt2x00/rt73usb.c | 35 ++++---
14 files changed, 378 insertions(+), 380 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2007-11-27 20:46 UTC (permalink / raw)
To: John W. Linville, linux-wireless, rt2400-devel
Hi John,
Here is the latest version of rt2x00.
Please merge the patches for 2.6.24
09 - Only update rssi average approximation on receiving beacon frames.
10 - Remove redundant code in rfkill setup
11 - Cleanup rfkill
All other patches can wait for 2.6.25, since they are code cleanups and the
new TX/RX frame dumping facility through debugfs.
Ivo
---
The following changes since commit 301df40749bdf144c72637795ba93d82e4b84682:
Johannes Berg (1):
mac80211: remove more forgotten code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Replace DRV_NAME with KBUILD_MODNAME
rt2x00: Extend PLCP descriptor definition for rt2400pci
rt2x00: Move register value/offset files into new folder
rt2x00: Add chipset version to chipset debugfs entry
rt2x00: Add skb descriptor
rt2x00: Add TX/RX frame dumping facility
rt2x00: Use IEEE80211_IF_TYPE_INVALID directly
rt2x00: Cleanup rfkill
rt2x00: Release rt2x00 2.0.13
Larry Finger (1):
rt2x00: Remove redundant code in rfkill setup
Mattias Nissler (1):
rt2x00: Only update rssi average approximation on receiving beacon frames.
drivers/net/wireless/rt2x00/rt2400pci.c | 49 ++----
drivers/net/wireless/rt2x00/rt2400pci.h | 20 ++-
drivers/net/wireless/rt2x00/rt2500pci.c | 9 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 39 +++--
drivers/net/wireless/rt2x00/rt2x00.h | 26 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 5 -
drivers/net/wireless/rt2x00/rt2x00debug.c | 240 +++++++++++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00dev.c | 93 ++++++----
drivers/net/wireless/rt2x00/rt2x00firmware.c | 5 -
drivers/net/wireless/rt2x00/rt2x00lib.h | 6 +
drivers/net/wireless/rt2x00/rt2x00mac.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00pci.c | 59 +++++--
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 15 --
drivers/net/wireless/rt2x00/rt2x00ring.h | 22 +++
drivers/net/wireless/rt2x00/rt2x00usb.c | 41 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 36 +++--
drivers/net/wireless/rt2x00/rt73usb.c | 36 +++--
17 files changed, 484 insertions(+), 224 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2007-11-27 20:46 Ivo van Doorn
@ 2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2007-11-27 20:54 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi,
> Please merge the patches for 2.6.24
> 09 - Only update rssi average approximation on receiving beacon frames.
> 10 - Remove redundant code in rfkill setup
> 11 - Cleanup rfkill
Sorry that should be:
08 - Only update rssi average approximation on receiving beacon frames.
09 - Remove redundant code in rfkill setup
10 - Cleanup rfkill
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-11-27 20:54 ` Ivo van Doorn
@ 2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: John W. Linville @ 2007-11-29 22:26 UTC (permalink / raw)
To: Ivo van Doorn; +Cc: linux-wireless, rt2400-devel
On Tue, Nov 27, 2007 at 09:54:29PM +0100, Ivo van Doorn wrote:
> > Please merge the patches for 2.6.24
> Sorry that should be:
> 08 - Only update rssi average approximation on receiving beacon frames.
> 09 - Remove redundant code in rfkill setup
> 10 - Cleanup rfkill
Actually it looks to me like 9 and 10 apply to code that isn't in
2.6.24. 8 looks like it is close, but it doesn't quite apply either.
I'll try to massage it in -- hopefully Jeff won't mind the extra
trouble when rebasing...
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: Please pull 'upstream' branch of rt2x00
2007-11-29 22:26 ` John W. Linville
@ 2007-11-30 9:51 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-11-30 9:51 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
On Thursday 29 November 2007, John W. Linville wrote:
> On Tue, Nov 27, 2007 at 09:54:29PM +0100, Ivo van Doorn wrote:
>
> > > Please merge the patches for 2.6.24
>
> > Sorry that should be:
> > 08 - Only update rssi average approximation on receiving beacon frames.
> > 09 - Remove redundant code in rfkill setup
> > 10 - Cleanup rfkill
>
> Actually it looks to me like 9 and 10 apply to code that isn't in
> 2.6.24. 8 looks like it is close, but it doesn't quite apply either.
> I'll try to massage it in -- hopefully Jeff won't mind the extra
> trouble when rebasing...
9 and 10 should apply cleanly since the rfkill code hasn't changed for quite
some time now. In fact I believe it hasn't changed since the initial merge
to 2.6.24-rc.
Anyway, I'll try to create a patch for the upstream-jgarzik branch this weekend,
that would safe you and jeff some work. :)
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-10-27 11:34 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-10-27 11:34 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the 2.0.12 release of rt2x00.
I noticed you only pulled 2 patches from the 2.0.11 release,
and I don't know why you dropped the remaining patches.
This means that this pull requests also contains the remaining
2.0.11 patches...
Lots of bugfixes this time, finally rfkill is working, link speeds issues
have been resolved and some packet loss issues are gone.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.12/
Ivo
---
The following changes since commit 0119130478b1706232d79c768cb587c5e0c615de:
John W. Linville (1):
Merge branch 'fixes-jgarzik' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (2):
rt2x00: Unconstify rt2x00dev
rt2x00: Place mutex around USB register access
Ivo van Doorn (15):
rt2x00: Move quality statistics into seperate structure
rt2x00: Use enum defines
rt2x00: Correctly translate mac80211 antenna setup to rt2x00
rt2x00: SW diversity should default to antenna B
rt2x00: Remove rt2x00_clear_link
rt2x00: Implement SW diversity
rt2x00: Cleanup if-statements
rt2x00: Release rt2x00 2.0.11
rt2x00: Disable RX when switching antenna
rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna
rt2x00: Input-polldev requires input device
rt2x00: Detect initial rfkill state on register
rt2x00: Remove unused variables
rt2x00: Remove data_desc structure
rt2x00: Release rt2x00 2.0.12
Mattias Nissler (4):
rt2x00: Fix antenna selection.
rt2x00: Rework rt61 antenna selection.
rt2x00: Rework rt73 antenna selection
rt2x00: Correctly set ACK bit in tx descriptors
drivers/net/wireless/rt2x00/rt2400pci.c | 104 +++++----
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 112 +++++-----
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 169 +++++++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 17 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 192 ++++++++++++----
drivers/net/wireless/rt2x00/rt2x00config.c | 95 ++++++++-
drivers/net/wireless/rt2x00/rt2x00debug.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 212 +++++++++++++++---
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +
drivers/net/wireless/rt2x00/rt2x00pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 44 ++++-
drivers/net/wireless/rt2x00/rt2x00ring.h | 23 +--
drivers/net/wireless/rt2x00/rt2x00usb.c | 38 +++-
drivers/net/wireless/rt2x00/rt2x00usb.h | 19 +-
drivers/net/wireless/rt2x00/rt61pci.c | 332 ++++++++++++++--------------
drivers/net/wireless/rt2x00/rt61pci.h | 14 +-
drivers/net/wireless/rt2x00/rt73usb.c | 198 ++++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 14 +-
21 files changed, 1071 insertions(+), 538 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-10-13 14:27 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-10-13 14:27 UTC (permalink / raw)
To: John W. Linville; +Cc: rt2400-devel, linux-wireless
Hi John,
Here is the rt2x00 2.0.11 update.
Highlights for this release are the fix for the TX problems,
and the implementation of the Software Diversity Antenna.
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.11/
Ivo
---
The following changes since commit 2d46d1e00056de79e54c622a60f7e6f8818f6cb4:
Mattias Nissler (1):
mac80211: Defer setting of RX_FLAG_DECRYPTED.
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (9):
rt2x00: Move quality statistics into seperate structure
rt2x00: Use enum defines
rt2x00: Correctly translate mac80211 antenna setup to rt2x00
rt2x00: SW diversity should default to antenna B
rt2x00: Remove rt2x00_clear_link
rt2x00: Implement SW diversity
rt2x00: Cleanup if-statements
rt2x00: Add new rt73usb USB ID
rt2x00: Release rt2x00 2.0.11
Mattias Nissler (2):
rt2x00: Fix residual check in PLCP calculations.
rt2x00: Fix antenna selection.
drivers/net/wireless/rt2x00/rt2400pci.c | 80 +++++++-----
drivers/net/wireless/rt2x00/rt2500pci.c | 88 ++++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 84 +++++++-----
drivers/net/wireless/rt2x00/rt2500usb.h | 13 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 165 +++++++++++++++++------
drivers/net/wireless/rt2x00/rt2x00config.c | 85 +++++++++++-
drivers/net/wireless/rt2x00/rt2x00dev.c | 201 ++++++++++++++++++++++++----
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +
drivers/net/wireless/rt2x00/rt61pci.c | 116 +++++++++--------
drivers/net/wireless/rt2x00/rt73usb.c | 87 +++++++------
10 files changed, 645 insertions(+), 276 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-10-06 12:19 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-10-06 12:19 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the rt2x00 2.0.10 update.
Some obvious bugs have been fixed, some not so obvious bugs,
and the code has been cleaned up a bit by moving more
into rt2x00lib.
Note that as of now rt2x00.git will be branched from the wireless-2.6
git tree. I see wireless-dev has already been removed/renamed so
I won't be using that anymore. ;)
All indivual patches can also be found here:
http://kernel.org//pub/linux/kernel/people/ivd/rt2x00-2.0.10/
Ivo
---
The following changes since commit f88cf9b6d7c8dad6eb64a972a753584b8006c545:
John W. Linville (1):
zd1211rw-mac80211: undo print_mac API stuff
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (16):
rt2x00: Remove duplicate code in MAC & BSSID handling
rt2x00: Remove radio check from rt2x00lib_toggle_rx
rt2x00: Store "STARTED" state during suspend
rt2x00: Move rt2x00dev flags into enumeration
rt2x00: Don't use changed_flags inside configure_packet_filter
rt2x00: Fix rfkill handling
rt2x00: Move TSF sync values into rt2x00config
rt2x00: get_duration expects values in 100kbs
rt2x00: Cut lines down to 80 characters
rt2x00: Add get_tx_data_len callback function
rt2x00: Pass dev_state to rt2x00lib_toggle_rx
rt2x00: Small optimizations
rt2x00: Reorganize configuration handler
rt2x00: Clean disabling of rt73usb_get_tsf
rt2x00: Allways memset memory obtained from skb_push()
rt2x00: Release 2.0.10
drivers/net/wireless/rt2x00/rt2400pci.c | 186 ++++++++++----------------
drivers/net/wireless/rt2x00/rt2500pci.c | 201 +++++++++++-----------------
drivers/net/wireless/rt2x00/rt2500usb.c | 200 ++++++++++++----------------
drivers/net/wireless/rt2x00/rt2x00.h | 93 ++++++++++---
drivers/net/wireless/rt2x00/rt2x00config.c | 113 +++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00dev.c | 52 +++++---
drivers/net/wireless/rt2x00/rt2x00lib.h | 14 +--
drivers/net/wireless/rt2x00/rt2x00mac.c | 38 +++++-
drivers/net/wireless/rt2x00/rt2x00reg.h | 9 ++
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 29 +++--
drivers/net/wireless/rt2x00/rt61pci.c | 166 +++++++----------------
drivers/net/wireless/rt2x00/rt73usb.c | 195 +++++++++++----------------
13 files changed, 642 insertions(+), 658 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-09-25 18:52 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-09-25 18:52 UTC (permalink / raw)
To: John W. Linville, linux-wireless, rt2400-devel
Hi John,
(Finally) the rt2x00 2.0.9 release containing the patches
for the API changes from the mac80211-misc git tree.
NOTE: currently rt2x00.git is branched off from the mac80211-misc
tree to make the porting easier and to allow early testing.
So you might want to pull that tree before pulling rt2x00.
This release contains several bug fixes especially some kernel
panics during rmmod have been fixed by Modestas Vainius.
---
The following changes since commit 4cceb887147261d7fd9fe7ce3b6d6f236c8300bc:
Michael Wu (1):
adm8211: Adapt to filter configuration API
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (11):
rt2x00: Correct error in calculating rssi for link tuner
rt2x00: Make *_beacon_update static
rt2x00: Increase rt2x00usb_vendor_request timeout.
rt2x00: Correctly identify rt2561turbo
rt2x00: adapt to filter configuration API
rt2x00: Reorganize rt2x00dev->flags
rt2x00: Add rt2x00dev->flags to debugfs
rt2x00: Stop link tuning when radio is down
rt2x00: Fix obvious typo in comment
rt2x00: Fix panic on rmmod with rfkill enabled
rt2x00: Release rt2x00 2.0.9
Modestas Vainius (1):
rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work
drivers/net/wireless/rt2x00/rt2400pci.c | 159 +++++++++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 171 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt2500usb.c | 181 ++++++++++++++++------------
drivers/net/wireless/rt2x00/rt2x00.h | 70 ++++-------
drivers/net/wireless/rt2x00/rt2x00config.c | 75 +-----------
drivers/net/wireless/rt2x00/rt2x00debug.c | 37 ++++++
drivers/net/wireless/rt2x00/rt2x00dev.c | 109 +++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 155 ++++++++----------------
drivers/net/wireless/rt2x00/rt2x00pci.c | 31 ++---
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 14 +--
drivers/net/wireless/rt2x00/rt2x00ring.h | 17 +++-
drivers/net/wireless/rt2x00/rt2x00usb.c | 26 ++---
drivers/net/wireless/rt2x00/rt2x00usb.h | 8 +-
drivers/net/wireless/rt2x00/rt61pci.c | 172 ++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.c | 179 ++++++++++++++++------------
drivers/net/wireless/rt2x00/rt73usb.h | 2 +-
17 files changed, 728 insertions(+), 682 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-09-16 12:17 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-09-16 12:17 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
It has taken some time to finally release this,
but it contains quite a lot of bugfixes of variating impact.
Overall the stability has been greatly improved,
although there are still some nasty bugs in there.
Note that even after this update rt2x00 in wireless-dev will still not work
for encrypted networks. This is because rt2x00 depends on the encryption
patches by Johannes which are pending for wireless-dev inclusion
(Most notably the patch that fixes the IEEE80211_HW_WEP_INCLUDE_IV
behavior is required to make it work again).
Ivo
---
The following changes since commit e6d77b902151278df6a670b460a32e7cc6b75e9e:
Luis R. Rodriguez (1):
Merge branch 'ath5k' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (24):
rt2x00: Remove firmware not-NULL check
rt2x00: Don't check for IEEE80211_TXCTL_REQ_TX_STATUS
rt2x00: Cleanup rxdone
rt2x00: Don't allow configuration calls when uninitialized
rt2x00: Fix rt61pci and rt73usb beacon handling
rt2x00: Recalculate link quality
rt2x00: Cleanup entry->flags
rt2x00: Reduce LNA flags
rt2x00: Rework RT61 and RT73 Antenna handling
rt2x00: Rename DEVICE_SUPPORT_ATIM to REQUIRE_BEACON_RING
rt2x00: Remove rt2x00mac_reset()
rt2x00: Fix system freeze on device removal
rt2x00: Reduce magic value writing to device
rt2x00: New USB ID's for rt73usb and rt2500usb
rt2x00: Beacon ring entries should have QID_MGMT
rt2x00: Fix DEV_RATEBIT_ definitions
rt2x00: Fix rfkill handling
rt2x00: Merge allocation/free register components
rt2x00: macro's shouldn't use hidden arguments
rt2x00: Fix channel initialization
rt2x00: Add better CONFIG_PM checks
rt2x00: Add start/stop handlers
rt2x00: Add additional bit to MAX_FRAME_UNIT
rt2x00: Release rt2x00 2.0.8
drivers/net/wireless/rt2x00/rt2400pci.c | 37 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 83 +++--
drivers/net/wireless/rt2x00/rt2500pci.h | 40 ++-
drivers/net/wireless/rt2x00/rt2500usb.c | 208 ++++++++--
drivers/net/wireless/rt2x00/rt2500usb.h | 39 ++-
drivers/net/wireless/rt2x00/rt2x00.h | 47 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 12 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 26 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 308 ++++++--------
drivers/net/wireless/rt2x00/rt2x00firmware.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 111 ++++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 127 ++----
drivers/net/wireless/rt2x00/rt2x00pci.h | 3 +
drivers/net/wireless/rt2x00/rt2x00reg.h | 27 +-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 29 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 235 +++--------
drivers/net/wireless/rt2x00/rt2x00usb.h | 9 +-
drivers/net/wireless/rt2x00/rt61pci.c | 617 ++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt61pci.h | 87 ++++-
drivers/net/wireless/rt2x00/rt73usb.c | 471 +++++++++++++-------
drivers/net/wireless/rt2x00/rt73usb.h | 65 +++-
23 files changed, 1615 insertions(+), 982 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-08-19 18:18 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-08-19 18:18 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Well finally rt2x00 2.0.7 is released, unfortunately it will
not be the last release in the 2.0.* series as promised earlier.
This series contains lots of bugfixes, but some of the more
critical issues are still present. rt2x00 is however becoming
more usable for more people, so the progress is there. ;)
I'll do my best to make the next release 2.0.8 the last in the
2.0.* series so 2.1.0 can be moved upstream. :)
Ivo
---
The following changes since commit f5a420590f3f6a45ee5bca0048640f0f24852315:
John W. Linville (1):
Merge branch 'b43' into everything
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (27):
rt2x00: Correctly configure packet filter in monitor mode
rt2x00: Clear MAC and BSSID when non-monitor interface goes down
rt2x00: Check return value of usb_control_msg()
rt2x00: Clear all fields on start_link_tune()
rt2x00: Don't increase rx_failed for individual frames
rt2x00: Set vgc_level during reset_tuner
rt2x00: Schedule beacon update
rt2x00: Be consistent with unsigned
rt2x00: Correctly reset TX/RX success/failed counters
rt2x00: Rework RF register handling
rt2x00: rt2x00_ring_free returns invalid length
rt2x00: Use caching for USB transfers
rt2x00: Cleanup set_state for rt61 and rt73
rt2x00: Fix register initialization ordering
rt2x00: memset descriptor before use
rt2x00: Remove IEEE80211_HW_WEP_INCLUDE_IV flag
rt2x00: Cleanup TXD flags
rt2x00: Add byte-ordering annotation for MAC and BSSID
rt2x00: Correctly set TXD retry flag
rt2x00: Move rt2x00 files into rt2x00 folder
rt2x00: Add file pattern to MAINTAINER entry
rt2x00: Fix PLCP setup
rt2x00: Clean up RATEMASK handling
rt2x00: Add rt2x00lib_reset_link_tuner()
rt2x00: Always check if mac80211 requested TX status update
rt2x00: Lindent
rt2x00: rt2x00 2.0.7
Luca Tettamanti (1):
Fix off-by-one error in debugfs helpers
Mattias Nissler (2):
rt2x00: Fix width of filter field.
rt2x00: Store firmware in memory
MAINTAINERS | 1 +
drivers/net/wireless/Kconfig | 131 +------
drivers/net/wireless/Makefile | 23 +-
drivers/net/wireless/rt2x00/Kconfig | 130 ++++++
drivers/net/wireless/rt2x00/Makefile | 22 +
drivers/net/wireless/{ => rt2x00}/rt2400pci.c | 149 ++++---
drivers/net/wireless/{ => rt2x00}/rt2400pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2500pci.c | 409 ++++++++++--------
drivers/net/wireless/{ => rt2x00}/rt2500pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2500usb.c | 382 +++++++++-------
drivers/net/wireless/{ => rt2x00}/rt2500usb.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00.h | 56 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00config.c | 14 +-
drivers/net/wireless/{ => rt2x00}/rt2x00debug.c | 23 +-
drivers/net/wireless/{ => rt2x00}/rt2x00debug.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00dev.c | 221 ++++++----
drivers/net/wireless/{ => rt2x00}/rt2x00firmware.c | 43 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00lib.h | 5 +
drivers/net/wireless/{ => rt2x00}/rt2x00mac.c | 15 +-
drivers/net/wireless/{ => rt2x00}/rt2x00pci.c | 7 +-
drivers/net/wireless/{ => rt2x00}/rt2x00pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt2x00reg.h | 56 ++-
drivers/net/wireless/{ => rt2x00}/rt2x00rfkill.c | 0
drivers/net/wireless/{ => rt2x00}/rt2x00ring.h | 6 +-
drivers/net/wireless/{ => rt2x00}/rt2x00usb.c | 114 ++++-
drivers/net/wireless/{ => rt2x00}/rt2x00usb.h | 60 +++-
drivers/net/wireless/{ => rt2x00}/rt61pci.c | 466 ++++++++------------
drivers/net/wireless/{ => rt2x00}/rt61pci.h | 0
drivers/net/wireless/{ => rt2x00}/rt73usb.c | 471 +++++++++++---------
drivers/net/wireless/{ => rt2x00}/rt73usb.h | 0
30 files changed, 1532 insertions(+), 1272 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/Kconfig
create mode 100644 drivers/net/wireless/rt2x00/Makefile
rename drivers/net/wireless/{ => rt2x00}/rt2400pci.c (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2400pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2500pci.c (84%)
rename drivers/net/wireless/{ => rt2x00}/rt2500pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2500usb.c (81%)
rename drivers/net/wireless/{ => rt2x00}/rt2500usb.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00.h (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00config.c (92%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00debug.c (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00debug.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00dev.c (85%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00firmware.c (84%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00lib.h (94%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00mac.c (97%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00pci.c (98%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00reg.h (80%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00rfkill.c (100%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00ring.h (96%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00usb.c (85%)
rename drivers/net/wireless/{ => rt2x00}/rt2x00usb.h (65%)
rename drivers/net/wireless/{ => rt2x00}/rt61pci.c (89%)
rename drivers/net/wireless/{ => rt2x00}/rt61pci.h (100%)
rename drivers/net/wireless/{ => rt2x00}/rt73usb.c (82%)
rename drivers/net/wireless/{ => rt2x00}/rt73usb.h (100%)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-08-02 15:45 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-08-02 15:45 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is rt2x00 version 2.0.6,
unfortunately 2.0.5 was broken and unusable.
Problem has been found and fixed, so together with
some other small changes here is 2.0.6 :)
This one should be safe to be merged with FC kernels. ;)
Ivo
---
The following changes since commit 515c4dbee8271ff66fde61304309b1992e430502:
John W. Linville (1):
Merge branch 'upstream' of git://git.kernel.org/.../ivd/rt2x00
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (7):
Merge branch 'wireless-dev'
rt2x00: Add new USB ID for Buffalo rt73usb
rt2x00: Update rssi before signal calculation
rt2x00: Return 0 when the offset != 0
rt2x00: rt2x00lib_config_mac_addr should call config_mac
rt2x00: Release rt2x00 2.0.6
Merge branch 'wireless-dev'
drivers/net/wireless/rt2x00.h | 2 +-
drivers/net/wireless/rt2x00config.c | 4 ++--
drivers/net/wireless/rt2x00debug.c | 6 ++++++
drivers/net/wireless/rt2x00dev.c | 2 +-
drivers/net/wireless/rt73usb.c | 2 ++
5 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00.h b/drivers/net/wireless/rt2x00.h
index c5c1773..77556fe 100644
--- a/drivers/net/wireless/rt2x00.h
+++ b/drivers/net/wireless/rt2x00.h
@@ -41,7 +41,7 @@
* Module information.
* DRV_NAME should be set within the individual module source files.
*/
-#define DRV_VERSION "2.0.5"
+#define DRV_VERSION "2.0.6"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
diff --git a/drivers/net/wireless/rt2x00config.c b/drivers/net/wireless/rt2x00config.c
index 3733a84..11d5646 100644
--- a/drivers/net/wireless/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00config.c
@@ -37,13 +37,13 @@
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac)
{
if (mac)
- rt2x00dev->ops->lib->config_bssid(rt2x00dev, mac);
+ rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, mac);
}
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
{
if (bssid)
- rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, bssid);
+ rt2x00dev->ops->lib->config_bssid(rt2x00dev, bssid);
}
void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter)
diff --git a/drivers/net/wireless/rt2x00debug.c b/drivers/net/wireless/rt2x00debug.c
index ffc95bb..d6c4cfe 100644
--- a/drivers/net/wireless/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00debug.c
@@ -124,6 +124,9 @@ static ssize_t rt2x00debug_read_##__name(struct file *file, \
size_t size; \
__type value; \
\
+ if (*offset) \
+ return 0; \
+ \
if (intf->offset_##__name > debug->__name.word_count) \
return -EINVAL; \
\
@@ -151,6 +154,9 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \
size_t size; \
__type value; \
\
+ if (*offset) \
+ return 0; \
+ \
if (!capable(CAP_NET_ADMIN)) \
return -EPERM; \
\
diff --git a/drivers/net/wireless/rt2x00dev.c b/drivers/net/wireless/rt2x00dev.c
index a584fbe..28ddbe0 100644
--- a/drivers/net/wireless/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00dev.c
@@ -349,11 +349,11 @@ void rt2x00lib_rxdone(struct data_entry *entry, char *data,
}
}
+ rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
rt2x00dev->link.rx_success++;
rx_status->rate = val;
rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev);
rx_status->ssi = rssi;
- rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
/*
* Let's allocate a sk_buff where we can store the received data in,
diff --git a/drivers/net/wireless/rt73usb.c b/drivers/net/wireless/rt73usb.c
index 48fb38e..2f0bf29 100644
--- a/drivers/net/wireless/rt73usb.c
+++ b/drivers/net/wireless/rt73usb.c
@@ -1884,6 +1884,8 @@ static struct usb_device_id rt73usb_device_table[] = {
{ USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Buffalo */
+ { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
^ permalink raw reply related [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2007-07-31 18:36 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is a new release of rt2x00: 2.0.5
Don't let the 25 patches fool you, there are 2 _very_ big patches among them. ;)
The 2 biggest are (as announced earlier) the results of a Lindent run,
and the result of a code cleanup. After those 2 patches the code is hopefully
clean enough to be accepted upstream when rt2x00 is a bit more stable.
In any case further code cleanup patches won't/shouldn't be so big anymore.
Some interesting features in this release:
- rt73usb no longer crashes in adhoc mode (But neither does it work)
- rf registers can now be read/written through debugfs
- Monitor interfaces should now capture everything
- Signal reporting
- Correct suspend/resume handling
Ivo
---
The following changes since commit 6e46e62d22ed4b5282d3b9592483e901a9f2643f:
Zhu Yi (1):
iwlwifi: update version stamp to 0.1.5
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Ivo van Doorn (25):
rt2x00: Remove rt73usb_get_tsf
rt2x00: Put rf register value detection in function
rt2x00: Don't toggle tuner bit for non-RF2523 chips
rt2x00: Add reset_tuner handler
rt2x00: rt2500usb needs to reset BBP 24, 25 and 61
rt2x00: Cleanup RF register reading/writing
rt2x00: Add RF register contents to Debugfs
rt2x00: Fix invalid RF array reading
rt2x00: Increase RF_SIZE
rt2x00: rt2x00pci should use rf_size
rt2x00: Correctly handle RF 0 writing
rt2x00: Rename init_hw -> probe_hw
rt2x00: Move interface init/deinit into rt2x00dev
rt2x00: Fix interface opening/closing on suspend/resume
rt2x00: Lindent
rt2x00: Call all configure handlers during resume
rt2x00: Big rt2x00 cleanup
rt2x00: Add Multicast/Broadcast filtering
rt2x00: Include <linux/delay.h>
rt2x00: Periodically read statistics
rt2x00: Don't check for preamble in RXdone
rt2x00: Configure type during add_interface
rt2x00: Add Signal reporting
rt2x00: rt2x00 2.0.5
Merge branch 'wireless-dev'
drivers/net/wireless/Makefile | 2 +-
drivers/net/wireless/rt2400pci.c | 620 +++++++++++----------
drivers/net/wireless/rt2400pci.h | 3 +-
drivers/net/wireless/rt2500pci.c | 695 +++++++++++++-----------
drivers/net/wireless/rt2500pci.h | 2 +
drivers/net/wireless/rt2500usb.c | 686 +++++++++++++-----------
drivers/net/wireless/rt2500usb.h | 35 +-
drivers/net/wireless/rt2x00.h | 861 +++++++++---------------------
drivers/net/wireless/rt2x00config.c | 177 ++++++
drivers/net/wireless/rt2x00debug.c | 101 +++--
drivers/net/wireless/rt2x00debug.h | 32 +-
drivers/net/wireless/rt2x00dev.c | 470 +++++++++++------
drivers/net/wireless/rt2x00dev.h | 59 --
drivers/net/wireless/rt2x00firmware.c | 45 +-
drivers/net/wireless/rt2x00firmware.h | 43 --
drivers/net/wireless/rt2x00lib.h | 137 +++---
drivers/net/wireless/rt2x00mac.c | 283 +++++-----
drivers/net/wireless/rt2x00pci.c | 140 +++--
drivers/net/wireless/rt2x00pci.h | 38 +-
drivers/net/wireless/rt2x00reg.h | 270 +++++++++
drivers/net/wireless/rt2x00rfkill.c | 41 +-
drivers/net/wireless/rt2x00rfkill.h | 58 --
drivers/net/wireless/rt2x00ring.h | 242 ++++++++
drivers/net/wireless/rt2x00usb.c | 177 ++++---
drivers/net/wireless/rt2x00usb.h | 40 +-
drivers/net/wireless/rt61pci.c | 966 +++++++++++++++++----------------
drivers/net/wireless/rt61pci.h | 3 +-
drivers/net/wireless/rt73usb.c | 870 ++++++++++++++++--------------
drivers/net/wireless/rt73usb.h | 3 +-
29 files changed, 3870 insertions(+), 3229 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00config.c
delete mode 100644 drivers/net/wireless/rt2x00dev.h
delete mode 100644 drivers/net/wireless/rt2x00firmware.h
create mode 100644 drivers/net/wireless/rt2x00reg.h
delete mode 100644 drivers/net/wireless/rt2x00rfkill.h
create mode 100644 drivers/net/wireless/rt2x00ring.h
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2007-07-31 18:36 Ivo van Doorn
@ 2007-08-01 17:05 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-08-01 17:05 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Thanks for the quick pull on rt2x00.git,
but I have a short question:
> Ivo van Doorn (25):
> rt2x00: Remove rt73usb_get_tsf
> rt2x00: Put rf register value detection in function
> rt2x00: Don't toggle tuner bit for non-RF2523 chips
> rt2x00: Add reset_tuner handler
> rt2x00: rt2500usb needs to reset BBP 24, 25 and 61
> rt2x00: Cleanup RF register reading/writing
> rt2x00: Add RF register contents to Debugfs
> rt2x00: Fix invalid RF array reading
> rt2x00: Increase RF_SIZE
> rt2x00: rt2x00pci should use rf_size
> rt2x00: Correctly handle RF 0 writing
> rt2x00: Rename init_hw -> probe_hw
> rt2x00: Move interface init/deinit into rt2x00dev
> rt2x00: Fix interface opening/closing on suspend/resume
> rt2x00: Lindent
> rt2x00: Call all configure handlers during resume
> rt2x00: Big rt2x00 cleanup
> rt2x00: Add Multicast/Broadcast filtering
> rt2x00: Include <linux/delay.h>
> rt2x00: Periodically read statistics
> rt2x00: Don't check for preamble in RXdone
> rt2x00: Configure type during add_interface
> rt2x00: Add Signal reporting
The above have been merged nicely,
but where did the following patch go to?
> rt2x00: rt2x00 2.0.5
Was this intentionally dropped,
or was there a weird git problem somewhere?
Thanks,
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-07-25 20:49 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-07-25 20:49 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes
regarding the USB ID and the rt61pci interrupts.
The latter one (hopefully) resolves an bugreport recently
raised in the Fedora Bugzilla. (I'll update the report in a few seconds)
And yes I have read the mails of today regarding patch submissions,
so I'll start sending the individual patches as well along with this pull request. ;)
Short note about the state of rt2x00:
- Code cleaning is progressing, next version will probably contain
the result of Lindent run. But after that I don't expect big changes regarding
code style.
- Writing "Magical" values to the registers has been reduced as much as possible,
most values that are still magical are really magic and I have no clue on what they
exactly mean, except that those values should be written. ;)
- Suspend/resume is completely broken. I am not sure how the device should
correctly suspend/resume. Most important points on this area are
deregistering/registering ieee80211_hw and reassociation after resume.
I am gathering some more info on this, and will post a bigger report on the mailinglist
in a few days.
- Statistics reading. Noise and Signal are still empty...
It would really be nice to have some value to report for these statistics.
- Bug reports show definite progress, rt2x00 doesn't really seem to break things,
but neither is it doing a usefull things...
Ivo
---
The following changes since commit 9cc4f5142dd983d178b158e782d5e60900e48270:
Michael Wu (1):
mac80211: use more GFP_KERNEL instead of GFP_ATOMIC
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (1):
rt2x00: Don't export unneeded symbols
Ivo van Doorn (13):
rt2x00: Check permissions on debugfs write
Merge branch 'wireless-dev'
rt2x00: Use rts_cts_rate for CTS frames
rt2x00: Cleanup allocation/initialization
rt2x00: rt61pci interrupts are called on MCU CMD done
rt2x00: Reduce requirement for debugfs wrapper functions
rt2x00: Don't toggle promisc mode in link_tuner
rt2x00: Fix MAC address initialization for multiple interfaces
Merge branch 'wireless-dev'
rt2x00: Check for all errors on RXdone
rt2x00: Parse chipset revision for RT chip validation
rt2x00: Release 2.0.4
Merge branch 'wireless-dev'
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 83 +--
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 90 +---
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 105 ++---
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 17 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 237 +++------
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 27 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 560 ++++++++++----------
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 57 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 58 ++-
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 126 +++--
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 1 -
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 99 ++---
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 100 ++---
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 2 +-
19 files changed, 731 insertions(+), 842 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
0 siblings, 1 reply; 65+ messages in thread
From: Ivo van Doorn @ 2007-07-20 8:11 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Finally the 2.0.3 release of rt2x00 is here :)
And as promised since actually contains bugfixes
The hightlights are a working link tuner which finally
makes sure all drivers come close to being actually
useable.
Also a small change in statistics, rt2x00 will now only report the RSSI to mac80211.
The reporting of Noise values have been removed,
since rt2x00 cannot measure the noise and previously
reported the sensitivity value determined by the link_tuner.
And I am not completely sure if that is a desired behavior, since the preference
would be a measured value I guess.
Also I still have to determine what a good value for the Signal reporting
should be. With only a RSSI reporting I feel rt2x00 isn't reporting all that it can...
Ivo
---
The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
Johannes Berg (1):
mac80211: regdomain.c needs to include ieee80211_i.h
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master
Adam Baker (1):
rt2x00: Set Maximum sensitivity when not receiving
Ivo van Doorn (42):
rt2x00: Remove usage of open and stop callbacks
rt2x00: Fix rfkill compilation
rt2x00: rfkill should use input_poll device
rt2x00: Fix promisc mode check
rt2x00: Put debugfs_intf inbetween DEBUGFS defines
rt2x00: Cleanup debug messages
rt2x00: Remove ENTRY_TXD_NEW_SEQ flag
rt2x00: Remove DRV_NAME define from rt2x00.h
rt2x00: Remove device & mac_addr fields
rt2x00: Use the mac80211 provided workqueue
rt2x00: Don't wake device on resume
rt2x00: Move interrupt toggling into seperate function
rt2x00: Round LINK_TUNER_INTERVAL up
rt2x00: Set the IEEE80211_HW_NO_PROBE_FILTERING flag
rt2x00: Add rt2570 chipset revisions
rt2x00: Split TXD_ENTRY_AVAILABLE
rt2x00: rt61 should check the CIPHER_ERROR bit
rt2x00: Fix reporting false rate during rx
rt2x00: Correctly exit the firmware load function
rt2x00: Fix link tuner limitation for rt2400pci
rt2x00: Cleanup Kconfig dependencies and selects
rt2x00: Defer firmware loading untill ifup
rt2x00: Change register definition ordering
rt2x00: Correctly initialize PSCSR2 in rt2400.
rt2x00: Introduce the walking average
rt2x00: Remove noise reporting
rt2x00: Fix RSSI value reading / reporting / link tuning
rt2x00: Use prefetch for ring loop
rt2x00: Use the register field defines
rt2x00: Move initialization of rings into rt2x00usb
rt2x00: Move usb_interrupt_rxdone into rt2x00usb
rt2x00: Fix RX skb allocation
rt2x00: KConfig layout correction
rt2x00: Set DEVICE_ENABLED_RADIO_HW when rfkill is disabled
rt2x00: Change word argument for debug_access_t
rt2x00: Suspend/Resume Don't register/reregister device
Merge branch 'wireless-dev'
rt2x00: Fix CTS frame requirement detection
rt2x00: Don't cut FCS in RX frames
rt2x00: Use delayed_work_pending
rt2x00: Don't enable/disable link tuner twice
rt2x00: Release 2.0.3
drivers/net/wireless/mac80211/rt2x00/Kconfig | 91 ++++----
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 167 ++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 45 ++--
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 191 +++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 54 +++--
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 176 ++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 61 +++--
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 141 +++++++----
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 2 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 86 +------
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 77 ++----
.../net/wireless/mac80211/rt2x00/rt2x00firmware.h | 6 -
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 131 ++++------
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 52 ++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 16 +-
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 62 +++--
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.h | 7 +
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 156 +++++++++---
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 264 +++++++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 77 ++++--
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 242 ++++++++++---------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 81 ++++---
23 files changed, 1166 insertions(+), 1026 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Re: Please pull 'upstream' branch of rt2x00
2007-07-20 8:11 Ivo van Doorn
@ 2007-07-20 8:13 ` Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-07-20 8:13 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless, rt2400-devel
Hi,
One additional note I forgot to mention:
> The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
> Johannes Berg (1):
> mac80211: regdomain.c needs to include ieee80211_i.h
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master
Please note the new location of the Git repository ;)
Because of problems with the git.serialmonkey repository
we have now moved to git.kernel.org. :)
Ivo
^ permalink raw reply [flat|nested] 65+ messages in thread
* Please pull 'upstream' branch of rt2x00
@ 2007-06-19 18:18 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-06-19 18:18 UTC (permalink / raw)
To: John Linville, linux-wireless, rt2400-devel
Hi John,
Here is the 2.0.2 release of rt2x00.
As usual most changes are code cleaning,
followed by code moving into the library modules.
Unfortunately, this round still does not contain real bugfixes.
Hopefully the next release will really bugfixes. ;)
The actuall diff is quite big, but that is mainly because
of the cleanup in the register access functions which caused
all register functions to be renamed (which prevents namespace
pollution).
Ivo
---
The following changes since commit 9181e959da76d85d688d8ec763702ed2f3b4edf9:
John W. Linville (1):
rt2x00firmware.c: include delay.h to avoid build error on ppc64
are available in the git repository at:
git://git.serialmonkey.com/rt2x00.git/ upstream
Gertjan van Wingerde (1):
rt2x00: Clean up register access functions.
Ivo van Doorn (32):
rt2x00: Remove debug module parameter
rt2x00: Cleanup header
rt2x00: *_bbp_check should not return magic value
rt2x00: rt2400pci - Use BBPCSR for txdesc
rt2x00: Make antenna selection more transparent
rt2x00: Don't hardcode beacon interval
rt2x00: Move config requirement into rt2x00lib
rt2x00: Remove pointless 0xff checks
rt2x00: Correct *_bbp_check
rt2x00: Correctly set the flags for the correct flags field
rt2x00: Remove unsused structure
rt2x00: Don't export config functions to outside rt2x00lib
Merge branch 'wireless-dev'
rt2x00: Constify txd_size and rxd_size
rt2x00: rt2x00lib_disable_radio should call toggle_rx
rt2x00: Move USB radio enabling/disabling into rt2x00usb
rt2x00: Remove ring->type
rt2x00: Split rings into tx and rx arrays
rt2x00: Split tx ring array into tx and bcn
rt2x00: Move rt2x00{pci,usb} shared code into rt2x00lib
rt2x00: Move ring allocation into rt2x00lib
Merge branch 'wireless-dev'
rt2x00: Fix ring array iteration
rt2x00: Remove huge macro functions
rt2x00: Include rt2x00firmware.h
rt2x00: Move ring allocation partially into rt2x00lib
rt2x00: Remove unused library call fields
rt2x00: rt61 and rt73 do not support Atim
rt2x00: link_tuner should be toggled when the radio is toggled
rt2x00: Add EEPROM recovery code for mac address
Merge branch 'wireless-dev'
rt2x00: Release rt2x00 2.0.2
Mattias Nissler (1):
rt73: Prevent oops when usb device is disconnected.
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 627 ++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 28 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 673 +++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 34 +-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 660 ++++++---------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 38 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 120 ++--
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 540 ++++++++++---
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 60 ++
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 7 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 13 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 52 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 283 +------
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 29 +
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 4 -
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 323 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 14 +-
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 858 +++++++++-----------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 43 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 758 +++++++----------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 43 +-
21 files changed, 2363 insertions(+), 2844 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-06-03 12:25 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-06-03 12:25 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the new rt2x00 release: 2.0.1
It contains many patches since the previous release.
It doesn't address any major bugs that have been
reported, but the code has been cleaned up.
The most notable change is the addition of rfkill support. :)
Ivo
---
The following changes since commit 2e6c9eed7541f3e2a23a469f08e5be3ec28a129f:
James Ketrenos (1):
Add iwlwifi wireless drivers
are available in the git repository at:
git://git.serialmonkey.com/rt2x00.git/ upstream
Gertjan van Wingerde (8):
rt2x00: Move rxd_size and txd_size fields.
rt2x00: Update firmware loading interface.
rt2x00: Initialisation cleanup.
Move firmware loading code out of main rt2x00lib source file.
Fix debug support.
Let lowlevel driver decide on firmware names.
rt2x00: Provide cleaner firmware loading interface to lowlevel driver.
rt2x00: Deregister debugs at firmware loading failure.
Ivo van Doorn (34):
rt2x00: Add rfkill support
rt2x00: Use MODULE_FIRMWARE
rt2x00: cosmetic - rename CONFIG_RT2X00_DEBUGFS
rt2x00: Move crc-itu-t usage into rt2x00lib
rt2x00: Remove channel_change_time usage
rt2x00: Apply the 80 character line rule
rt2x00: Prevent forward declaration of functions
rt2x00: When toggling RX the link tuner should also be toggled
rt2x00: Move generic link_tuner code into rt2x00lib
rt2x00: Make rt2400 link tuner work like legacy driver
rt2x00: Remove activity_led
rt2x00: Make sure link tuning follows Legacy guidelines
rt2x00: Use correct values for r24, r25 and r26
rt2x00: Add EEPROM recovery data
rt2x00: Correctly initialize rt73usb PHY_CSR1
rt2x00: Use defines for chipset assignments
rt2x00: Merge kick_beacon_gen and kick_tx_queue
rt2x00: Merge radio control functions into 1 callback function
rt2x00: Make promisc mode available to USB devices
rt2x00: Make use of open / stop handlers
rt2x00: Cleanup flag handling
rt2x00: Use linux/bitops.h
rt2x00: Add FIELD8 and matching handlers
rt2x00: Move drv_name field into rt2x00_ops
rt2x00: rt2x00lib is in charge of forcing promisc mode
rt2x00: Make debug messages more informative
rt2x00: Fix rt61 typo
rt2x00: Move CONFIG_RT2X00_LIB_DEBUGFS ifdef out of rt2x00dev.c
rt2x00: Reduce indentation for txpower handlers
rt2x00: Define ARCSR2, ARCSR3, ARCSR4 and ARCSR5 registers
rt2x00: Fix compilation errors for rt2x00-rfkill
Merge branch 'wireless-dev'
rt2x00: Merge LENGTH_LOW and LENGTH_HIGH
rt2x00: Release rt2x00 2.0.1
drivers/net/wireless/mac80211/rt2x00/Kconfig | 33 +-
drivers/net/wireless/mac80211/rt2x00/Makefile | 10 +-
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 401 +++++++------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 65 ++-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 486 +++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 61 ++-
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 542 +++++++++++-------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 29 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 407 +++++++------
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 39 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 22 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 264 ++++-----
.../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 129 +++++
.../net/wireless/mac80211/rt2x00/rt2x00firmware.h | 49 ++
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 15 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 179 +++---
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 98 ++--
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 133 +++++
.../net/wireless/mac80211/rt2x00/rt2x00rfkill.h | 51 ++
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 76 ++--
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 601 ++++++++++++--------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 33 +-
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 589 +++++++++++--------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 33 +-
24 files changed, 2589 insertions(+), 1756 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00firmware.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00firmware.h
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00rfkill.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00rfkill.h
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-05-07 14:44 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-05-07 14:44 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, rt2400-devel
Hi John,
Here is the latest rt2x00 update. It is a rather small one.
Only 1 real fix, and the second path is cosmetic since it
will start a proper versioning of rt2x00.
This will most likely be the last pull request for the next 1 or 2 months
due to developer/time/health shortage.
The TODO list for rt2x00 has been expanding over the last few days,
so as soon as I am fully back there will be quite a lot to do. ;)
(http://rt2x00.serialmonkey.com/wiki/index.php?title=Rt2x00_beta#rt2x00_beta_status_page)
Ivo
---
The following changes since commit 5209b1eff0b1891d8bb002eb067a11b4caa5f5bc:
John W. Linville (1):
Merge branch 'from-linus'
are found in the git repository at:
http://git.serialmonkey.com/rt2x00.git/ upstream
Ivo van Doorn (2):
rt2x00: release 2.0.0
Merge branch 'wireless-dev'
Jan Kiszka (1):
rt2x00: Fix master beacon setup
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 3 +--
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 17 -----------------
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 14 +++++++++++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 17 -----------------
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 19 +------------------
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 8 +++-----
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 8 +++-----
10 files changed, 30 insertions(+), 80 deletions(-)
^ permalink raw reply [flat|nested] 65+ messages in thread* Please pull 'upstream' branch of rt2x00
@ 2007-04-28 20:45 Ivo van Doorn
0 siblings, 0 replies; 65+ messages in thread
From: Ivo van Doorn @ 2007-04-28 20:45 UTC (permalink / raw)
To: John Linville, linux-wireless
Hi John,
A new update of rt2x00 is ready. :)
Perhaps the most interesting thing would be the removal
of passive scan support, because it was a purely software based
solution that (if really required) could best be resolved in mac80211
rather then the driver for devices that don't support such a thing in the
hardware.
The rest is just code being moved around, (more specifically code being moved
from the drivers toward rt2x00lib/pci/usb. There aren't any specific bugfixes made.
Ivo
---
The following changes since commit 9e4fd17309d0acddd1748c76f6bd35a0c85446b6:
Johannes Berg (1):
clarify locking comment in cfg80211
are found in the git repository at:
http://git.serialmonkey.com/rt2x00.git/ upstream
Ivo van Doorn (38):
rt2x00: Move beaconhandling into rt2x00{usb,pci} modules
rt2x00: Fix rt2x00pci, rt2x00usb, rt2x00mac module/debug enviroment
rt2x00: Move common rxdone and txdone code into rt2x00lib
rt2x00: Set rf_base during channel configuration
rt2x00: Move initialize() and uninitialize() into rt2x00pci/rt2x00usb
rt2x00: Fix spellin error
rt2x00: Move ieee80211_hw init & registration into rt2x00lib
rt2x00: Fix hardware mode registration order
rt2x00: Add struct debugsfs pointer to rt2x00dev
rt2x00: Fix debugfs related compile problem
rt2x00: Explicit return type for rt2x00debug_register
rt2x00: Fix sparse errors
rt2x00: Move alloc_rings into rt2x00lib
rt2x00: Move device allocation into rt2x00lib
rt2x00: Make rt2x00debug const
rt2x00: Minor fixes (comment & headers)
rt2x00: Create rt2x00_ops structure
rt2x00: rt2x00pci shouldn't use DRV_NAME for irq registration
rt2x00: Rename rt(25)73 identifications
rt2x00: Move PCI/USB handlers into rt2x00pci/usb modules
rt2x00: Fix hw mode registration
rt2x00: Fix NULL pointer exeption during init_hw
rt2x00: Fix sparse warnings
rt2x00: Fix ERROR strings
rt2x00: Move rf values outside functions
rt2x00: Allocate enough rings
rt2x00: Move write_tx_data functions into rt2x00pci/usb
rt2x00: Fix compilation error when not selecting rt61pci and rt73usb
rt2x00: Add return statement to rt2x00lib_alloc_dev
rt2x00: Create dummy rt2x00lib_firmware_load_wait()
rt2x00: Move write_tx_desc initialization into rt2x00lib
rt2x00: Remove ENTRY_RTS_CTS_FRAME flag
rt2x00: Fix check for Acked frames
Merge branch 'wireless-dev'
rt2x00: Remove passive scanning support
rt2x00: Set channel_change_time to 0
rt2x00: Move USB txdone handler into rt2x00usb
rt2x00: rt61 should call ieee80211_wake_queue only for correct queues
drivers/net/wireless/mac80211/rt2x00/Makefile | 2 +
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 1303 +++------------
drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 9 +-
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 1496 ++++--------------
drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 1448 +++--------------
drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 2 -
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 165 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c | 27 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h | 7 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 689 +++++++-
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 70 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 166 +--
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 587 +++++++
drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 50 +-
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 637 +++++++
drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 44 +-
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 1731 ++++---------------
drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 7 -
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 1597 ++++---------------
drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 4 +-
21 files changed, 3553 insertions(+), 6495 deletions(-)
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c
create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c
^ permalink raw reply [flat|nested] 65+ messages in thread
end of thread, other threads:[~2008-12-20 10:01 UTC | newest]
Thread overview: 65+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-17 16:30 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-02-17 16:31 ` [PATCH 01/11] rt2x00: Send frames out with configured TX power Ivo van Doorn
2008-02-17 16:32 ` [PATCH 02/11] rt2x00: Don't report driver generated frames to tx_status() Ivo van Doorn
2008-02-17 16:33 ` [PATCH 04/11] rt2x00: Filter ACK_CTS based on FIF_CONTROL Ivo van Doorn
2008-02-17 16:33 ` [PATCH 03/11] rt2x00: Fix Descriptor DMA initialization Ivo van Doorn
2008-02-17 16:33 ` [PATCH 05/11] rt2x00: Remove reset_tsf() Ivo van Doorn
2008-02-17 16:34 ` [PATCH 06/11] rt2x00: Rename dscape -> mac80211 Ivo van Doorn
2008-02-17 16:35 ` [PATCH 07/11] rt2x00: Cleanup mode registration Ivo van Doorn
2008-02-17 16:35 ` [PATCH 08/11] rt2x00: Remove async vendor request calls from rt2x00usb Ivo van Doorn
2008-02-17 16:35 ` [PATCH 09/11] Fix hw mode registration with mac80211 Ivo van Doorn
2008-02-17 16:36 ` [PATCH 10/11] rt2x00: Fix MAC address defines in rt61pci Ivo van Doorn
2008-02-17 16:36 ` [PATCH 11/11] rt2x00: Release rt2x00 2.1.2 Ivo van Doorn
-- strict thread matches above, loose matches on Subject: below --
2008-12-20 9:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-12-02 17:19 Ivo van Doorn
2008-10-29 16:16 Ivo van Doorn
2008-08-29 19:03 Ivo van Doorn
2008-08-04 14:36 Ivo van Doorn
2008-07-19 14:15 Ivo van Doorn
2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
2008-06-16 17:58 Ivo van Doorn
2008-06-08 21:41 Ivo van Doorn
2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
2008-05-05 15:23 Ivo van Doorn
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
2008-03-09 21:37 Ivo van Doorn
2008-02-25 22:20 Ivo van Doorn
2008-02-10 21:46 Ivo van Doorn
2008-02-03 14:41 Ivo van Doorn
2008-01-06 22:37 Ivo van Doorn
2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
2007-10-27 11:34 Ivo van Doorn
2007-10-13 14:27 Ivo van Doorn
2007-10-06 12:19 Ivo van Doorn
2007-09-25 18:52 Ivo van Doorn
2007-09-16 12:17 Ivo van Doorn
2007-08-19 18:18 Ivo van Doorn
2007-08-02 15:45 Ivo van Doorn
2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
2007-07-25 20:49 Ivo van Doorn
2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
2007-06-19 18:18 Ivo van Doorn
2007-06-03 12:25 Ivo van Doorn
2007-05-07 14:44 Ivo van Doorn
2007-04-28 20:45 Ivo van Doorn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).