From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ra.tuxdriver.com ([70.61.120.52]:3098 "EHLO ra.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751474AbYBURCc (ORCPT ); Thu, 21 Feb 2008 12:02:32 -0500 Date: Thu, 21 Feb 2008 11:31:34 -0500 From: "John W. Linville" To: Ahmed Ammar Cc: linux-wireless@vger.kernel.org Subject: Re: b43 (H/W 4306 Rev. 03) Message-ID: <20080221163134.GF3094@tuxdriver.com> (sfid-20080221_170236_648894_08B04C60) References: <84ac67910802210444q4da4f02bo2d172493ef2c7158@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <84ac67910802210444q4da4f02bo2d172493ef2c7158@mail.gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Thu, Feb 21, 2008 at 12:44:15PM +0000, Ahmed Ammar wrote: > As per my talk with st3 #bcm-users I have decided you e-mail you with > the details of my problem. I have this card: > > 02:07.0 Network controller: Broadcom Corporation BCM4306 802.11b/g > Wireless LAN Controller (rev 03) > > And whatever I do I can not get it to associate, I have tried with and > without encryption and below are two pastes of dmesg with and without > hwcrypto. I am not alone in this I have other people who have the same > problem and have to use this patch to get the card working on > b43legacy instead (http://url2cut.com?pwI) > Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] I wonder if you could try using the firmware from here instead (aka FW11): http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2 Does that improve the situation for you? Thanks, John -- John W. Linville linville@tuxdriver.com