From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ra.tuxdriver.com ([70.61.120.52]:2246 "EHLO ra.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755119AbYBUUcH (ORCPT ); Thu, 21 Feb 2008 15:32:07 -0500 Date: Thu, 21 Feb 2008 15:18:11 -0500 From: "John W. Linville" To: Ahmed Ammar Cc: linux-wireless@vger.kernel.org Subject: Re: b43 (H/W 4306 Rev. 03) Message-ID: <20080221201811.GM3094@tuxdriver.com> (sfid-20080221_203213_050705_7EA2B117) References: <84ac67910802210444q4da4f02bo2d172493ef2c7158@mail.gmail.com> <20080221163134.GF3094@tuxdriver.com> <84ac67910802211007n55569d6j92dee1da198e9b1d@mail.gmail.com> <20080221182615.GK3094@tuxdriver.com> <84ac67910802211204y575e893cnd056bbd7442f27ea@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <84ac67910802211204y575e893cnd056bbd7442f27ea@mail.gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Thu, Feb 21, 2008 at 08:04:28PM +0000, Ahmed Ammar wrote: > > > Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] > > > > > > You are still using the same firmware. > > > > Make sure you extracted the firmware to the right place. You may have > > to use the "-w" option to b43-fwcutter. The proper firmware location > > depends on the distribution. For Fedora it is in /lib/firmware. > > > > I am very sure. Do I need to reboot? All I did was: rmmod b43 ssb Hmmm...OK, my mistake. > bonding: bond0: enslaving wlan0 as an active interface with a down link. This looks a little odd. Have you had this working in the past? Can you try a setup using just wlan0 (i.e. without bonding)? Thanks, John -- John W. Linville linville@tuxdriver.com