From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@redhat.com>
Cc: "linux-wireless" <linux-wireless@vger.kernel.org>,
rt2400-devel@lists.sourceforge.net
Subject: Please pull 'upstream' branch of rt2x00
Date: Sun, 9 Mar 2008 22:37:43 +0100 [thread overview]
Message-ID: <200803092237.43451.IvDoorn@gmail.com> (raw)
Hi John,
This is the latest version of rt2x00: 2.1.4
All drivers are now showing excellent progress, rt2400pci, rt2500pci, rt61pci and rt73usb
seem to be working as expected now. And only rt2500usb is spoiling things by having
only a working RX but no TX.
After this patch series, it is highly likely you can close a lot of rt2x00 related bugs
in the Fedora bugzilla. :)
Ivo
---
The following changes since commit 4f739cf30891f277a6353d61275489528fab64e3:
Pavel Roskin (1):
at76_usb: make the driver depend on MAC80211
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream
Adam Baker (2):
rt2x00: never disable multicast because it disables broadcast too
rt2x00:correct rx packet length for USB devices
Ivo van Doorn (18):
rt2x00: Align RX descriptor to 4 bytes
rt2x00: Don't use uninitialized desc_len
rt2x00: Use skbdesc fields for descriptor initialization
rt2x00: Add new D-Link USB ID
rt2x00: Only disable beaconing just before beacon update
rt2x00: Upgrade queue->lock to use irqsave
rt2x00: Move firmware checksumming to driver
rt2x00: Start bugging when rt2x00lib doesn't filter SW diversity
rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flag
rt2x00: Rename config_preamble() to config_erp()
rt2x00: Add suspend/resume handlers to rt2x00rfkill
rt2x00: Make rt2x00leds_register return void
rt2x00: Always enable TSF ticking
rt2x00: Fix basic rate initialization
rt2x00: Fix compile error when rfkill is disabled
rt2x00: Fix RX DMA ring initialization
rt2x00: Fix rt2400pci signal
rt2x00: Release rt2x00 2.1.4
Luis Correia (1):
rt2x00: Fix trivial log message
Mattias Nissler (3):
rt2x00: Initialize TX control field in data entries
rt2x00: Use the correct size when copying the control info in txdone
rt2x00: Don't use unitialized rxdesc->size
drivers/net/wireless/rt2x00/Kconfig | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 67 +++++++------
drivers/net/wireless/rt2x00/rt2400pci.h | 6 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 71 ++++++++------
drivers/net/wireless/rt2x00/rt2500usb.c | 97 ++++++++++---------
drivers/net/wireless/rt2x00/rt2x00.h | 31 ++++--
drivers/net/wireless/rt2x00/rt2x00config.c | 62 +++++++-----
drivers/net/wireless/rt2x00/rt2x00debug.c | 5 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 108 +++++++++------------
drivers/net/wireless/rt2x00/rt2x00firmware.c | 34 +-------
drivers/net/wireless/rt2x00/rt2x00leds.c | 7 +-
drivers/net/wireless/rt2x00/rt2x00lib.h | 45 ++++-----
drivers/net/wireless/rt2x00/rt2x00mac.c | 22 +++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 1 +
drivers/net/wireless/rt2x00/rt2x00queue.c | 17 ++-
drivers/net/wireless/rt2x00/rt2x00queue.h | 3 +
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 116 +++++++++++++++--------
drivers/net/wireless/rt2x00/rt2x00usb.c | 19 ++++-
drivers/net/wireless/rt2x00/rt61pci.c | 104 ++++++++++++--------
drivers/net/wireless/rt2x00/rt73usb.c | 131 +++++++++++++++-----------
20 files changed, 524 insertions(+), 426 deletions(-)
next reply other threads:[~2008-03-09 21:50 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-09 21:37 Ivo van Doorn [this message]
2008-03-09 21:38 ` [PATCH 01/24] rt2x00: Align RX descriptor to 4 bytes Ivo van Doorn
2008-03-09 21:38 ` [PATCH 02/24] rt2x00: Initialize TX control field in data entries Ivo van Doorn
2008-03-09 21:39 ` [PATCH 03/24] rt2x00: Use the correct size when copying the control info in txdone Ivo van Doorn
2008-03-09 21:40 ` [PATCH 04/24] rt2x00: Don't use uninitialized desc_len Ivo van Doorn
2008-03-09 21:40 ` [PATCH 05/24] rt2x00: never disable multicast because it disables broadcast too Ivo van Doorn
2008-03-09 21:41 ` [PATCH 06/24] rt2x00: Don't use unitialized rxdesc->size Ivo van Doorn
2008-03-09 21:41 ` [PATCH 07/24] rt2x00: Use skbdesc fields for descriptor initialization Ivo van Doorn
2008-03-09 21:42 ` [PATCH 08/24] rt2x00: Add new D-Link USB ID Ivo van Doorn
2008-03-09 21:42 ` [PATCH 09/24] rt2x00: Only disable beaconing just before beacon update Ivo van Doorn
2008-03-09 21:43 ` [PATCH 10/24] rt2x00:correct rx packet length for USB devices Ivo van Doorn
2008-03-09 21:43 ` [PATCH 11/24] rt2x00: Fix trivial log message Ivo van Doorn
2008-03-09 21:44 ` [PATCH 12/24] rt2x00: Upgrade queue->lock to use irqsave Ivo van Doorn
2008-03-09 21:44 ` [PATCH 13/24] rt2x00: Move firmware checksumming to driver Ivo van Doorn
2008-03-09 21:45 ` [PATCH 14/24] rt2x00: Start bugging when rt2x00lib doesn't filter SW diversity Ivo van Doorn
2008-03-09 21:45 ` [PATCH 15/24] rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flag Ivo van Doorn
2008-03-09 21:46 ` [PATCH 16/24] rt2x00: Rename config_preamble() to config_erp() Ivo van Doorn
2008-03-09 21:46 ` [PATCH 17/24] rt2x00: Add suspend/resume handlers to rt2x00rfkill Ivo van Doorn
2008-03-09 21:47 ` [PATCH 18/24] rt2x00: Make rt2x00leds_register return void Ivo van Doorn
2008-03-09 21:47 ` [PATCH 19/24] rt2x00: Always enable TSF ticking Ivo van Doorn
2008-03-09 21:48 ` [PATCH 20/24] rt2x00: Fix basic rate initialization Ivo van Doorn
2008-03-09 21:48 ` [PATCH 21/24] rt2x00: Fix compile error when rfkill is disabled Ivo van Doorn
2008-03-09 21:48 ` [PATCH 22/24] rt2x00: Fix RX DMA ring initialization Ivo van Doorn
2008-03-09 21:49 ` [PATCH 23/24] rt2x00: Fix rt2400pci signal Ivo van Doorn
2008-03-09 21:49 ` [PATCH 24/24] rt2x00: Release rt2x00 2.1.4 Ivo van Doorn
-- strict thread matches above, loose matches on Subject: below --
2008-12-20 9:52 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-12-02 17:19 Ivo van Doorn
2008-10-29 16:16 Ivo van Doorn
2008-08-29 19:03 Ivo van Doorn
2008-08-04 14:36 Ivo van Doorn
2008-07-19 14:15 Ivo van Doorn
2008-07-18 18:43 Ivo van Doorn
2008-07-19 13:55 ` Ivo van Doorn
2008-06-16 17:58 Ivo van Doorn
2008-06-08 21:41 Ivo van Doorn
2008-05-10 11:37 Ivo van Doorn
2008-05-10 12:48 ` drago01
2008-05-10 13:06 ` Ivo van Doorn
2008-05-10 13:15 ` drago01
2008-05-05 15:23 Ivo van Doorn
2008-05-02 21:04 Scott White
2008-05-02 21:25 ` Ivo van Doorn
2008-05-03 6:19 ` Mattias Nissler
2008-05-03 9:58 ` Ivo van Doorn
2008-05-03 10:18 ` Mattias Nissler
2008-05-03 15:02 ` Ivo van Doorn
2008-05-03 15:27 ` Johannes Berg
2008-05-03 15:38 ` Mattias Nissler
2008-05-03 16:56 ` Ivo van Doorn
2008-05-03 19:29 ` Scott White
2008-05-05 17:31 ` John W. Linville
2008-04-21 17:06 Ivo van Doorn
2008-05-01 8:29 ` Ivo van Doorn
2008-02-25 22:20 Ivo van Doorn
2008-02-17 16:30 Ivo van Doorn
2008-02-10 21:46 Ivo van Doorn
2008-02-03 14:41 Ivo van Doorn
2008-01-06 22:37 Ivo van Doorn
2007-11-27 20:46 Ivo van Doorn
2007-11-27 20:54 ` Ivo van Doorn
2007-11-29 22:26 ` John W. Linville
2007-11-30 9:51 ` Ivo van Doorn
2007-10-27 11:34 Ivo van Doorn
2007-10-13 14:27 Ivo van Doorn
2007-10-06 12:19 Ivo van Doorn
2007-09-25 18:52 Ivo van Doorn
2007-09-16 12:17 Ivo van Doorn
2007-08-19 18:18 Ivo van Doorn
2007-08-02 15:45 Ivo van Doorn
2007-07-31 18:36 Ivo van Doorn
2007-08-01 17:05 ` Ivo van Doorn
2007-07-25 20:49 Ivo van Doorn
2007-07-20 8:11 Ivo van Doorn
2007-07-20 8:13 ` Ivo van Doorn
2007-06-19 18:18 Ivo van Doorn
2007-06-03 12:25 Ivo van Doorn
2007-05-07 14:44 Ivo van Doorn
2007-04-28 20:45 Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803092237.43451.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@redhat.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).