From: Holger Schurig <hs4233@mail.mn-solutions.de>
To: libertas-dev@lists.infradead.org
Cc: Dan Williams <dcbw@redhat.com>,
linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH] libertas: convert sleep/wake config direct commands
Date: Wed, 26 Mar 2008 13:22:11 +0100 [thread overview]
Message-ID: <200803261322.11647.hs4233@mail.mn-solutions.de> (raw)
Confirm sleep event: they come very regularly, eventually several times per
second. Therefore we want to send the config command as fast as possible.
The old code pre-set the command in priv->lbs_ps_confirm_sleep. However, the
byte sequence to be sent to the hardware is the same for all interfaces. So
this patch make this an extern structure, initialized at module load time.
Config wake event: normal conversion to a direct command. However, I don't know
how to trigger a "HOST AWAKE" event from the firmware, so this part is
untested.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Index: wireless-testing/drivers/net/wireless/libertas/dev.h
===================================================================
--- wireless-testing.orig/drivers/net/wireless/libertas/dev.h 2008-03-26 09:48:57.000000000 +0100
+++ wireless-testing/drivers/net/wireless/libertas/dev.h 2008-03-26 10:34:15.000000000 +0100
@@ -267,9 +267,6 @@ struct lbs_private {
char ps_supported;
u8 needtowakeup;
- struct PS_CMD_ConfirmSleep lbs_ps_confirm_sleep;
- struct cmd_header lbs_ps_confirm_wake;
-
struct assoc_request * pending_assoc_req;
struct assoc_request * in_progress_assoc_req;
@@ -326,6 +323,8 @@ struct lbs_private {
u8 fw_ready;
};
+extern struct cmd_confirm_sleep confirm_sleep;
+
/** Association request
*
* Encapsulates all the options that describe a specific assocation request
Index: wireless-testing/drivers/net/wireless/libertas/cmdresp.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/libertas/cmdresp.c 2008-03-26 09:50:36.000000000 +0100
+++ wireless-testing/drivers/net/wireless/libertas/cmdresp.c 2008-03-26 10:43:03.000000000 +0100
@@ -548,21 +548,20 @@ done:
static int lbs_send_confirmwake(struct lbs_private *priv)
{
- struct cmd_header *cmd = &priv->lbs_ps_confirm_wake;
+ struct cmd_header cmd;
int ret = 0;
lbs_deb_enter(LBS_DEB_HOST);
- cmd->command = cpu_to_le16(CMD_802_11_WAKEUP_CONFIRM);
- cmd->size = cpu_to_le16(sizeof(*cmd));
- cmd->seqnum = cpu_to_le16(++priv->seqnum);
- cmd->result = 0;
-
- lbs_deb_host("SEND_WAKEC_CMD: before download\n");
+ cmd.command = cpu_to_le16(CMD_802_11_WAKEUP_CONFIRM);
+ cmd.size = cpu_to_le16(sizeof(cmd));
+ cmd.seqnum = cpu_to_le16(++priv->seqnum);
+ cmd.result = 0;
- lbs_deb_hex(LBS_DEB_HOST, "wake confirm command", (void *)cmd, sizeof(*cmd));
+ lbs_deb_hex(LBS_DEB_HOST, "wake confirm", (u8 *) &cmd,
+ sizeof(cmd));
- ret = priv->hw_host_to_card(priv, MVMS_CMD, (void *)cmd, sizeof(*cmd));
+ ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &cmd, sizeof(cmd));
if (ret)
lbs_pr_alert("SEND_WAKEC_CMD: Host to Card failed for Confirm Wake\n");
Index: wireless-testing/drivers/net/wireless/libertas/main.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/libertas/main.c 2008-03-26 09:54:52.000000000 +0100
+++ wireless-testing/drivers/net/wireless/libertas/main.c 2008-03-26 10:31:56.000000000 +0100
@@ -37,6 +37,11 @@ EXPORT_SYMBOL_GPL(lbs_debug);
module_param_named(libertas_debug, lbs_debug, int, 0644);
+/* This global structure is used to send the confirm_sleep command as
+ * fast as possible down to the firmware. */
+struct cmd_confirm_sleep confirm_sleep;
+
+
#define LBS_TX_PWR_DEFAULT 20 /*100mW */
#define LBS_TX_PWR_US_DEFAULT 20 /*100mW */
#define LBS_TX_PWR_JP_DEFAULT 16 /*50mW */
@@ -1013,14 +1018,6 @@ static int lbs_init_adapter(struct lbs_p
&priv->network_free_list);
}
- priv->lbs_ps_confirm_sleep.seqnum = cpu_to_le16(++priv->seqnum);
- priv->lbs_ps_confirm_sleep.command =
- cpu_to_le16(CMD_802_11_PS_MODE);
- priv->lbs_ps_confirm_sleep.size =
- cpu_to_le16(sizeof(struct PS_CMD_ConfirmSleep));
- priv->lbs_ps_confirm_sleep.action =
- cpu_to_le16(CMD_SUBCMD_SLEEP_CONFIRMED);
-
memset(priv->current_addr, 0xff, ETH_ALEN);
priv->connect_status = LBS_DISCONNECTED;
@@ -1462,6 +1459,10 @@ EXPORT_SYMBOL_GPL(lbs_interrupt);
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
+ memset(&confirm_sleep, 0, sizeof(confirm_sleep));
+ confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE);
+ confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep));
+ confirm_sleep.action = cpu_to_le16(CMD_SUBCMD_SLEEP_CONFIRMED);
lbs_debugfs_init();
lbs_deb_leave(LBS_DEB_MAIN);
return 0;
Index: wireless-testing/drivers/net/wireless/libertas/cmd.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/libertas/cmd.c 2008-03-26 09:55:48.000000000 +0100
+++ wireless-testing/drivers/net/wireless/libertas/cmd.c 2008-03-26 10:38:09.000000000 +0100
@@ -1802,38 +1802,27 @@ void lbs_send_iwevcustom_event(struct lb
lbs_deb_leave(LBS_DEB_WEXT);
}
-static int sendconfirmsleep(struct lbs_private *priv, u8 *cmdptr, u16 size)
+static void lbs_send_confirmsleep(struct lbs_private *priv)
{
unsigned long flags;
- int ret = 0;
+ int ret;
lbs_deb_enter(LBS_DEB_HOST);
- lbs_deb_hex(LBS_DEB_HOST, "sleep confirm command", cmdptr, size);
-
- ret = priv->hw_host_to_card(priv, MVMS_CMD, cmdptr, size);
+ lbs_deb_hex(LBS_DEB_HOST, "sleep confirm", (u8 *) &confirm_sleep,
+ sizeof(confirm_sleep));
- spin_lock_irqsave(&priv->driver_lock, flags);
- if (priv->intcounter || priv->currenttxskb)
- lbs_deb_host("SEND_SLEEPC_CMD: intcounter %d, currenttxskb %p\n",
- priv->intcounter, priv->currenttxskb);
- spin_unlock_irqrestore(&priv->driver_lock, flags);
+ ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
+ sizeof(confirm_sleep));
if (ret) {
- lbs_pr_alert(
- "SEND_SLEEPC_CMD: Host to Card failed for Confirm Sleep\n");
+ lbs_pr_alert("confirm_sleep failed\n");
} else {
spin_lock_irqsave(&priv->driver_lock, flags);
- if (!priv->intcounter) {
+ if (!priv->intcounter)
priv->psstate = PS_STATE_SLEEP;
- } else {
- lbs_deb_host("SEND_SLEEPC_CMD: after sent, intcounter %d\n",
- priv->intcounter);
- }
spin_unlock_irqrestore(&priv->driver_lock, flags);
}
-
- lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
- return ret;
+ lbs_deb_leave(LBS_DEB_HOST);
}
void lbs_ps_sleep(struct lbs_private *priv, int wait_option)
@@ -1906,8 +1895,7 @@ void lbs_ps_confirm_sleep(struct lbs_pri
if (allowed) {
lbs_deb_host("sending lbs_ps_confirm_sleep\n");
- sendconfirmsleep(priv, (u8 *) & priv->lbs_ps_confirm_sleep,
- sizeof(struct PS_CMD_ConfirmSleep));
+ lbs_send_confirmsleep(priv);
} else {
lbs_deb_host("sleep confirm has been delayed\n");
}
Index: wireless-testing/drivers/net/wireless/libertas/hostcmd.h
===================================================================
--- wireless-testing.orig/drivers/net/wireless/libertas/hostcmd.h 2008-03-26 10:02:54.000000000 +0100
+++ wireless-testing/drivers/net/wireless/libertas/hostcmd.h 2008-03-26 10:05:20.000000000 +0100
@@ -480,14 +480,11 @@ struct cmd_ds_802_11_ps_mode {
__le16 locallisteninterval;
};
-struct PS_CMD_ConfirmSleep {
- __le16 command;
- __le16 size;
- __le16 seqnum;
- __le16 result;
+struct cmd_confirm_sleep {
+ struct cmd_header hdr;
__le16 action;
- __le16 reserved1;
+ __le16 nullpktinterval;
__le16 multipledtim;
__le16 reserved;
__le16 locallisteninterval;
next reply other threads:[~2008-03-26 12:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-26 12:22 Holger Schurig [this message]
2008-03-27 21:24 ` [PATCH] libertas: convert sleep/wake config direct commands Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803261322.11647.hs4233@mail.mn-solutions.de \
--to=hs4233@mail.mn-solutions.de \
--cc=dcbw@redhat.com \
--cc=libertas-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox