From: Michael Buesch <mb@bu3sch.de>
To: John Linville <linville@tuxdriver.com>
Cc: bcm43xx-dev@lists.berlios.de, linux-wireless@vger.kernel.org
Subject: [PATCH] b43: Remove some dead code
Date: Sun, 20 Apr 2008 16:23:26 +0200 [thread overview]
Message-ID: <200804201623.26816.mb@bu3sch.de> (raw)
This patch removes some dead code from the driver.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
---
John, please queue for 2.6.27
Index: wireless-testing/drivers/net/wireless/b43/lo.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/lo.c 2008-04-20 15:24:10.000000000 +0200
+++ wireless-testing/drivers/net/wireless/b43/lo.c 2008-04-20 16:21:36.000000000 +0200
@@ -55,28 +55,26 @@ static struct b43_lo_calib * b43_find_lo
/* Write the LocalOscillator Control (adjust) value-pair. */
static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
{
struct b43_phy *phy = &dev->phy;
u16 value;
- u16 reg;
if (B43_DEBUG) {
if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) {
b43dbg(dev->wl, "Invalid LO control pair "
"(I: %d, Q: %d)\n", control->i, control->q);
dump_stack();
return;
}
}
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
value = (u8) (control->q);
value |= ((u8) (control->i)) << 8;
-
- reg = (phy->type == B43_PHYTYPE_B) ? 0x002F : B43_PHY_LO_CTL;
- b43_phy_write(dev, reg, value);
+ b43_phy_write(dev, B43_PHY_LO_CTL, value);
}
static u16 lo_measure_feedthrough(struct b43_wldev *dev,
u16 lna, u16 pga, u16 trsw_rx)
{
struct b43_phy *phy = &dev->phy;
Index: wireless-testing/drivers/net/wireless/b43/phy.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/phy.c 2008-04-20 15:41:46.000000000 +0200
+++ wireless-testing/drivers/net/wireless/b43/phy.c 2008-04-20 16:21:36.000000000 +0200
@@ -887,115 +887,12 @@ static void b43_phy_inita(struct b43_wld
b43_phy_write(dev, B43_PHY_OFDM(0x6E),
(b43_phy_read(dev, B43_PHY_OFDM(0x6E))
& 0xE000) | 0x3CF);
}
}
-static void b43_phy_initb2(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 offset, val;
-
- b43_write16(dev, 0x03EC, 0x3F22);
- b43_phy_write(dev, 0x0020, 0x301C);
- b43_phy_write(dev, 0x0026, 0x0000);
- b43_phy_write(dev, 0x0030, 0x00C6);
- b43_phy_write(dev, 0x0088, 0x3E00);
- val = 0x3C3D;
- for (offset = 0x0089; offset < 0x00A7; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- b43_phy_write(dev, 0x03E4, 0x3000);
- b43_radio_selectchannel(dev, phy->channel, 0);
- if (phy->radio_ver != 0x2050) {
- b43_radio_write16(dev, 0x0075, 0x0080);
- b43_radio_write16(dev, 0x0079, 0x0081);
- }
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x005A, 0x0070);
- b43_radio_write16(dev, 0x005B, 0x007B);
- b43_radio_write16(dev, 0x005C, 0x00B0);
- b43_radio_write16(dev, 0x007A, 0x000F);
- b43_phy_write(dev, 0x0038, 0x0677);
- b43_radio_init2050(dev);
- }
- b43_phy_write(dev, 0x0014, 0x0080);
- b43_phy_write(dev, 0x0032, 0x00CA);
- b43_phy_write(dev, 0x0032, 0x00CC);
- b43_phy_write(dev, 0x0035, 0x07C2);
-//XXX won't trigger b43_lo_b_measure(dev);
- b43_phy_write(dev, 0x0026, 0xCC00);
- if (phy->radio_ver != 0x2050)
- b43_phy_write(dev, 0x0026, 0xCE00);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1000);
- b43_phy_write(dev, 0x002A, 0x88A3);
- if (phy->radio_ver != 0x2050)
- b43_phy_write(dev, 0x002A, 0x88C2);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
- b43_phy_init_pctl(dev);
-}
-
-static void b43_phy_initb4(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 offset, val;
-
- b43_write16(dev, 0x03EC, 0x3F22);
- b43_phy_write(dev, 0x0020, 0x301C);
- b43_phy_write(dev, 0x0026, 0x0000);
- b43_phy_write(dev, 0x0030, 0x00C6);
- b43_phy_write(dev, 0x0088, 0x3E00);
- val = 0x3C3D;
- for (offset = 0x0089; offset < 0x00A7; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- b43_phy_write(dev, 0x03E4, 0x3000);
- b43_radio_selectchannel(dev, phy->channel, 0);
- if (phy->radio_ver != 0x2050) {
- b43_radio_write16(dev, 0x0075, 0x0080);
- b43_radio_write16(dev, 0x0079, 0x0081);
- }
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x005A, 0x0070);
- b43_radio_write16(dev, 0x005B, 0x007B);
- b43_radio_write16(dev, 0x005C, 0x00B0);
- b43_radio_write16(dev, 0x007A, 0x000F);
- b43_phy_write(dev, 0x0038, 0x0677);
- b43_radio_init2050(dev);
- }
- b43_phy_write(dev, 0x0014, 0x0080);
- b43_phy_write(dev, 0x0032, 0x00CA);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x0032, 0x00E0);
- b43_phy_write(dev, 0x0035, 0x07C2);
-
-//XXX won't trigger b43_lo_b_measure(dev);
-
- b43_phy_write(dev, 0x0026, 0xCC00);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x0026, 0xCE00);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1100);
- b43_phy_write(dev, 0x002A, 0x88A3);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x002A, 0x88C2);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
- b43_calc_nrssi_slope(dev);
- b43_calc_nrssi_threshold(dev);
- }
- b43_phy_init_pctl(dev);
-}
-
static void b43_phy_initb5(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct b43_phy *phy = &dev->phy;
u16 offset, value;
u8 old_channel;
@@ -1947,30 +1844,12 @@ int b43_phy_init(struct b43_wldev *dev)
case B43_PHYTYPE_A:
if (phy->rev == 2 || phy->rev == 3)
b43_phy_inita(dev);
else
unsupported = 1;
break;
- case B43_PHYTYPE_B:
- switch (phy->rev) {
- case 2:
- b43_phy_initb2(dev);
- break;
- case 4:
- b43_phy_initb4(dev);
- break;
- case 5:
- b43_phy_initb5(dev);
- break;
- case 6:
- b43_phy_initb6(dev);
- break;
- default:
- unsupported = 1;
- }
- break;
case B43_PHYTYPE_G:
b43_phy_initg(dev);
break;
case B43_PHYTYPE_N:
err = b43_phy_initn(dev);
break;
reply other threads:[~2008-04-20 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804201623.26816.mb@bu3sch.de \
--to=mb@bu3sch.de \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).