linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivo van Doorn <ivdoorn@gmail.com>
To: Bas Hulsken <bhulsken@hotmail.com>
Cc: rt2400-devel@lists.sourceforge.net,
	linux-wireless@vger.kernel.org,
	Johannes Berg <johannes@sipsolutions.net>
Subject: Re: rt61pci current wireless testing git gives kernel oops
Date: Fri, 25 Apr 2008 20:31:56 +0200	[thread overview]
Message-ID: <200804252031.56605.IvDoorn@gmail.com> (raw)
In-Reply-To: <1209147056.2955.7.camel@Bas>

Hi,

> I recently obtained an rt61pci NIC, and in an attempt to find out
> whether my recent hostapd problems were rt2500pci specific (remember
> that?) I plugged it into the server.

Yeah, I know the issue, I still have it on my todo list but haven't had much
time to take a real close look at it.

> the interface goes up well, but I get an oops as soon as I run hostapd,
> seems something with debugfs. This shows up in dmesg, let me know if you
> need any more info.

Johannes, this issue might have been introduced in your patch
"[PATCH] mac80211: fix key vs. sta locking problems"
do you know about this issue?

Ivo

> dmesg -----------------------------------------------------------------
> Unable to handle kernel NULL pointer dereference at 0000000000000218
> RIP: 
>  [<ffffffff8824bd9d>] :mac80211:ieee80211_debugfs_key_add_default
> +0x24/0x55
> PGD bad8c067 PUD b702d067 PMD 0 
> Oops: 0000 [1] SMP 
> CPU 2 
> Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs autofs4 fuse
> rfcomm l2cap sunrpc rt2500pci(U) ipt_REJECT xt_multiport iptable_filter
> ipt_MASQUERADE ipt_REDIRECT iptable_nat nf_nat nf_conntrack_ipv4 ipt_TOS
> iptable_mangle ip_tables nf_conntrack_ipv6 xt_state nf_conntrack
> xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables
> x_tables ipv6 cpufreq_ondemand acpi_cpufreq ext2 dm_mirror dm_multipath
> dm_mod wm8775 cx25840 msp3400 arc4 ecb blkcipher snd_hda_intel saa7115
> snd_seq_dummy snd_seq_oss snd_seq_midi_event tuner snd_seq rt61pci(U)
> rt2x00pci(U) snd_seq_device tea5767 tda8290 tuner_simple rt2x00lib(U)
> mt20xx snd_pcm_oss tea5761 snd_mixer_oss snd_pcm rfkill input_polldev
> rtl8187(U) mac80211(U) ivtv snd_timer snd_page_alloc snd_hwdep
> cfg80211(U) i2c_algo_bit snd i2c_i801 cx2341x tveeprom videodev
> firewire_ohci firewire_core crc_itu_t r8169 eeprom_93cx6(U) v4l2_common
> v4l1_compat iTCO_wdt hci_usb sr_mod lirc_atiusb button i2c_core pcspkr
> soundcore lirc_dev iTCO_vendor_support bluetooth sky2 cdrom sg floppy
> ahci pata_jmicron ata_generic ata_piix pata_acpi libata sd_mod scsi_mod
> raid456 async_xor async_memcpy async_tx xor ext3 jbd mbcache uhci_hcd
> ohci_hcd ehci_hcd
> Pid: 17, comm: events/2 Not tainted 2.6.24.4-64.fc8 #1
> RIP: 0010:[<ffffffff8824bd9d>]
> [<ffffffff8824bd9d>] :mac80211:ieee80211_debugfs_key_add_default
> +0x24/0x55
> RSP: 0018:ffff81012fb2de10  EFLAGS: 00010286
> RAX: 0000000000000000 RBX: ffff8100bac66400 RCX: 00000000000000b6
> RDX: ffff81012a443ea0 RSI: ffffffff88258eb7 RDI: ffff81012fb2de10
> RBP: ffff81012a811700 R08: ffff81012fc09c30 R09: 0000000000000036
> R10: ffffffff810b09b9 R11: ffffffff810fb05d R12: ffff81012fa53d40
> R13: ffffffffffffffff R14: 0000000000000036 R15: 0000000000000000
> FS:  0000000000000000(0000) GS:ffff81012fc01b00(0000)
> knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000218 CR3: 00000000cf9fc000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process events/2 (pid: 17, threadinfo ffff81012fb2c000, task
> ffff81012fb248b0)
> Stack:  0000000000000036 ffff81012a443ea0 ffff81012a443ea0
> ffff81012a811700
>  ffff81012dfda500 ffffffff810b479f ffff810100000000 ffff81012a811700
>  ffffffff8824722f ffff8100bac66400 ffffffff8824722f ffffffff88247027
> Call Trace:
>  [<ffffffff810b479f>] mntput_no_expire+0x1c/0x87
>  [<ffffffff8824722f>] :mac80211:key_todo+0x0/0x5
>  [<ffffffff8824722f>] :mac80211:key_todo+0x0/0x5
>  [<ffffffff88247027>] :mac80211:__ieee80211_key_todo+0x76/0x1ed
>  [<ffffffff8824722f>] :mac80211:key_todo+0x0/0x5
>  [<ffffffff88247228>] :mac80211:ieee80211_key_todo+0xe/0x15
>  [<ffffffff81045625>] run_workqueue+0x7f/0x10b
>  [<ffffffff81045f2d>] worker_thread+0x0/0xe4
>  [<ffffffff81046007>] worker_thread+0xda/0xe4
>  [<ffffffff81048f1d>] autoremove_wake_function+0x0/0x2e
>  [<ffffffff81048dee>] kthread+0x47/0x75
>  [<ffffffff8100cca8>] child_rip+0xa/0x12
>  [<ffffffff81048da7>] kthread+0x0/0x75
>  [<ffffffff8100cc9e>] child_rip+0x0/0x12
> 
> 
> Code: 8b 90 18 02 00 00 31 c0 e8 43 c0 ed f8 48 8b b5 40 04 00 00 
> RIP  [<ffffffff8824bd9d>] :mac80211:ieee80211_debugfs_key_add_default
> +0x24/0x55
>  RSP <ffff81012fb2de10>
> CR2: 0000000000000218
> ---[ end trace 5bf48e6dc8139959 ]---
> 
> modinfo-----------------------------------------------------------------
> filename:       /lib/modules/2.6.24.4-64.fc8/updates/rt2x00/rt61pci.ko
> license:        GPL
> firmware:       rt2661.bin
> firmware:       rt2561s.bin
> firmware:       rt2561.bin
> description:    Ralink RT61 PCI & PCMCIA Wireless LAN driver.
> version:        2.1.4
> author:         http://rt2x00.serialmonkey.com
> srcversion:     FCC52B48B3074E83A77D602
> alias:          pci:v00001814d00000401sv*sd*bc*sc*i*
> alias:          pci:v00001814d00000302sv*sd*bc*sc*i*
> alias:          pci:v00001814d00000301sv*sd*bc*sc*i*
> depends:        rt2x00lib,rt2x00pci,crc-itu-t,eeprom_93cx6
> vermagic:       2.6.24.4-64.fc8 SMP mod_unload 
> 
> lspci-----------------------------------------------------------------
> 05:01.0 Network controller: RaLink RT2561/RT61 802.11g PCI
>         Subsystem: Linksys WMP54G ver 4.1
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 64, Cache Line Size: 32 bytes
>         Interrupt: pin A routed to IRQ 17
>         Region 0: Memory at febf8000 (32-bit, non-prefetchable)
> [size=32K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: rt61pci
>         Kernel modules: rt61pci
> 
> 
> 



  reply	other threads:[~2008-04-25 18:30 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-25 18:10 rt61pci current wireless testing git gives kernel oops Bas Hulsken
2008-04-25 18:31 ` Ivo van Doorn [this message]
2008-04-25 22:15   ` Bas Hulsken
2008-04-26 15:55   ` Johannes Berg
2008-04-28 18:18   ` Johannes Berg
2008-04-30  9:45     ` Bas Hulsken
2008-04-30 14:08       ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200804252031.56605.IvDoorn@gmail.com \
    --to=ivdoorn@gmail.com \
    --cc=bhulsken@hotmail.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rt2400-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).