From: Ivo van Doorn <ivdoorn@gmail.com>
To: linville@tuxdriver.com
Cc: Johannes Berg <johannes@sipsolutions.net>,
linux-wireless@vger.kernel.org
Subject: [PATCH v2] mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
Date: Tue, 6 May 2008 23:50:00 +0200 [thread overview]
Message-ID: <200805062350.00648.IvDoorn@gmail.com> (raw)
In-Reply-To: <200805061943.31902.IvDoorn@gmail.com>
Since commit e38bad4766a110b61fa6038f10be16ced8c6cc38
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0mac80211: make ieee8021=
1_iterate_active_interfaces not need rtnl
rt2500usb and rt73usb broke down due to attempting register access
in atomic context (which is not possible for USB hardware).
This patch restores ieee80211_iterate_active_interfaces() to use RTNL l=
ock,
and provides the non-RTNL version under a new name:
ieee80211_iterate_active_interfaces_atomic()
So far only rt2x00 uses ieee80211_iterate_active_interfaces(), and thos=
e
drivers require the RTNL version of ieee80211_iterate_active_interfaces=
().
Since they already call that function directly, this patch will automat=
ically
fix the USB rt2x00 drivers.
v2: Rename ieee80211_iterate_active_interfaces_rtnl
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
John, this is still 2.6.26 material. ;)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7e75516..7d6de23 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1586,13 +1586,16 @@ void ieee80211_wake_queues(struct ieee80211_hw =
*hw);
void ieee80211_scan_completed(struct ieee80211_hw *hw);
=20
/**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the itera=
tor
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
*
* @hw: the hardware struct of which the interfaces should be iterated=
over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
* @data: first argument of the iterator function
*/
void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -1601,6 +1604,24 @@ void ieee80211_iterate_active_interfaces(struct =
ieee80211_hw *hw,
void *data);
=20
/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfa=
ces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces in=
stead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated=
over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *h=
w,
+ void (*iterator)(void *data,
+ u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data);
+
+/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @ra: receiver address of the BA session recipient
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 74c48ef..2a8c0c5 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -401,6 +401,41 @@ void ieee80211_iterate_active_interfaces(
struct ieee80211_local *local =3D hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
=20
+ rtnl_lock();
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ switch (sdata->vif.type) {
+ case IEEE80211_IF_TYPE_INVALID:
+ case IEEE80211_IF_TYPE_MNTR:
+ case IEEE80211_IF_TYPE_VLAN:
+ continue;
+ case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_IBSS:
+ case IEEE80211_IF_TYPE_WDS:
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ break;
+ }
+ if (sdata->dev =3D=3D local->mdev)
+ continue;
+ if (netif_running(sdata->dev))
+ iterator(data, sdata->dev->dev_addr,
+ &sdata->vif);
+ }
+
+ rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+ struct ieee80211_hw *hw,
+ void (*iterator)(void *data, u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data)
+{
+ struct ieee80211_local *local =3D hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
+
rcu_read_lock();
=20
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -425,4 +460,4 @@ void ieee80211_iterate_active_interfaces(
=20
rcu_read_unlock();
}
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-05-06 21:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-06 17:43 [PATCH] mac80211: Add RTNL version of ieee80211_iterate_active_interfaces Ivo van Doorn
2008-05-06 18:43 ` Johannes Berg
2008-05-06 21:07 ` Ivo van Doorn
2008-05-06 21:50 ` Ivo van Doorn [this message]
2008-05-06 21:50 ` [PATCH v2] " Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805062350.00648.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).