* [BUG] iwlwifi 3945 works only with disable_hw_scan=1
@ 2008-06-06 19:34 Maxim Levitsky
0 siblings, 0 replies; 5+ messages in thread
From: Maxim Levitsky @ 2008-06-06 19:34 UTC (permalink / raw)
To: linux-wireless; +Cc: ipw3945-devel
I recently bought an acer aspire 5720G, and wireless didn't work with
standard ubuntu 2.6.24 kernel.
I found that specifying the above option 'fixes' the driver
but I also noticed that list of available access points shrinks
to just one (the connected) point.
Moreover there is a trouble in changing a access point, it just hangs.
the button that toggles wireless does work, but doesn't blink.
I then installed latest -git kernel (~ 2.6.26-rc4) and got this:
* I still have to use disable_hw_scan=1
* Wireless led works thanks to acer-wmi
* If I disable wireless with the button, I _can't_ re-enable it unless
I reload the module.
* List of access points doesn't shrink, and I can switch between those points.
When I omit disable_hw_scan=1, I get errors about REPLY_SCAN_CMD
I will send detailed debug info later.
Best regards,
Maxim Levitsky
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] iwlwifi 3945 works only with disable_hw_scan=1
@ 2008-06-11 15:07 Maxim Levitsky
2008-06-12 3:28 ` Zhu Yi
0 siblings, 1 reply; 5+ messages in thread
From: Maxim Levitsky @ 2008-06-11 15:07 UTC (permalink / raw)
To: linux-wireless; +Cc: ipw3945-devel
[-- Attachment #1: Type: text/plain, Size: 957 bytes --]
Maxim Levitsky wrote:
> I recently bought an acer aspire 5720G, and wireless didn't work with
> standard ubuntu 2.6.24 kernel.
>
> I found that specifying the above option 'fixes' the driver
> but I also noticed that list of available access points shrinks
> to just one (the connected) point.
>
> Moreover there is a trouble in changing a access point, it just hangs.
> the button that toggles wireless does work, but doesn't blink.
>
> I then installed latest -git kernel (~ 2.6.26-rc4) and got this:
>
> * I still have to use disable_hw_scan=1
> * Wireless led works thanks to acer-wmi
> * If I disable wireless with the button, I _can't_ re-enable it unless
> I reload the module.
>
> * List of access points doesn't shrink, and I can switch between those points.
>
>
> When I omit disable_hw_scan=1, I get errors about REPLY_SCAN_CMD
> I will send detailed debug info later.
dmesg with debug=0x43ffff attached
Anybody know about that bug?
[-- Attachment #2: iwlwifi_firmware_log --]
[-- Type: text/plain, Size: 112317 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26-rc4-wl (maxim@MOBILE) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #7 SMP PREEMPT Tue Jun 10 20:00:16 IDT 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fcfe000 (usable)
[ 0.000000] BIOS-e820: 000000007fcfe000 - 000000007fd09000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd09000 - 000000007fd52000 (usable)
[ 0.000000] BIOS-e820: 000000007fd52000 - 000000007fd55000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd55000 - 000000007fdbb000 (usable)
[ 0.000000] BIOS-e820: 000000007fdbb000 - 000000007fdbf000 (reserved)
[ 0.000000] BIOS-e820: 000000007fdbf000 - 000000007fe84000 (usable)
[ 0.000000] BIOS-e820: 000000007fe84000 - 000000007febf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007febf000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00fe1b0] 000fe1b0
[ 0.000000] Entering add_active_range(0, 0, 523908) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523908
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523908
[ 0.000000] On node 0 totalpages: 523908
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292230 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
[ 0.000000] ACPI: XSDT 7FEFE120, 0064 (r1 ACRSYS ACRPRDCT 1 1000013)
[ 0.000000] ACPI: FACP 7FEFD000, 00F4 (r4 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT 7FEF4000, 84EA (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: FACS 7FE89000, 0040
[ 0.000000] ACPI: APIC 7FEF3000, 0068 (r2 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG 7FEF2000, 003C (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC 7FEF1000, 0176 (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: HPET 7FEF0000, 0038 (r1 ACRSYS ACRPRDCT 1 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7FEEF000, 04C4 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7FEEE000, 0232 (r1 PmRef Cpu0Tst 3000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7FEED000, 00A0 (r1 PmRef Cpu1Tst 3000 INTL 20051117)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 39428 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.628960] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519814
[ 0.628960] Kernel command line: root=UUID=bf354417-9873-455d-b81f-39240fe9ca91 ro quiet vga=792 splash i8042.dritek=1 acpi_osi=Linux
[ 0.628960] ACPI: Added _OSI(Linux)
[ 0.628960] mapped APIC to ffffb000 (fee00000)
[ 0.628960] mapped IOAPIC to ffffa000 (fec00000)
[ 0.628960] Enabling fast FPU save and restore... done.
[ 0.628960] Enabling unmasked SIMD FPU exception support... done.
[ 0.628960] Initializing CPU#0
[ 0.628960] Preemptible RCU implementation.
[ 0.628960] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.628960] Detected 1662.541 MHz processor.
[ 0.628960] Console: colour dummy device 80x25
[ 0.628960] console [tty0] enabled
[ 0.628960] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.628960] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.628960] Memory: 2053864k/2095632k available (2906k kernel code, 40416k reserved, 1333k data, 368k init, 1178056k highmem)
[ 0.628960] virtual kernel memory layout:
[ 0.628960] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.628960] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.628960] vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
[ 0.628960] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.628960] .init : 0xc0529000 - 0xc0585000 ( 368 kB)
[ 0.628960] .data : 0xc03d682b - 0xc0523d50 (1333 kB)
[ 0.628960] .text : 0xc0100000 - 0xc03d682b (2906 kB)
[ 0.628960] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.628960] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.628960] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.628960] hpet clockevent registered
[ 0.708834] Calibrating delay using timer specific routine.. 3329.27 BogoMIPS (lpj=6658555)
[ 0.708851] Security Framework initialized
[ 0.708858] SELinux: Disabled at boot.
[ 0.708862] Capability LSM initialized
[ 0.708873] Mount-cache hash table entries: 512
[ 0.708965] Initializing cgroup subsys ns
[ 0.708965] Initializing cgroup subsys cpuacct
[ 0.708965] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.708965] CPU: L2 cache: 2048K
[ 0.708965] CPU: Physical Processor ID: 0
[ 0.708965] CPU: Processor Core ID: 0
[ 0.708965] Intel machine check architecture supported.
[ 0.708965] Intel machine check reporting enabled on CPU#0.
[ 0.708965] using mwait in idle threads.
[ 0.708965] Checking 'hlt' instruction... OK.
[ 0.724966] ACPI: Core revision 20080321
[ 0.740967] ENABLING IO-APIC IRQs
[ 0.740967] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.780646] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
[ 0.780970] Booting processor 1/1 ip 6000
[ 0.788848] Initializing CPU#1
[ 0.788848] Calibrating delay using timer specific routine.. 3325.02 BogoMIPS (lpj=6650041)
[ 0.788848] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.788848] CPU: L2 cache: 2048K
[ 0.788848] CPU: Physical Processor ID: 0
[ 0.788848] CPU: Processor Core ID: 1
[ 0.788848] Intel machine check architecture supported.
[ 0.788848] Intel machine check reporting enabled on CPU#1.
[ 0.788848] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.868975] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
[ 0.868975] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.869001] Brought up 2 CPUs
[ 0.869004] Total of 2 processors activated (6654.29 BogoMIPS).
[ 0.869022] CPU0 attaching sched-domain:
[ 0.869025] domain 0: span 0-1
[ 0.869027] groups: 0 1
[ 0.869033] CPU1 attaching sched-domain:
[ 0.869035] domain 0: span 0-1
[ 0.869037] groups: 1 0
[ 0.872975] net_namespace: 644 bytes
[ 0.872975] NET: Registered protocol family 16
[ 0.872976] No dock devices found.
[ 0.872976] EISA bus registered
[ 0.872976] ACPI: bus type pci registered
[ 0.872976] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.872976] PCI: MCFG area at e0000000 reserved in E820
[ 0.872976] PCI: Using MMCONFIG for extended config space
[ 0.872976] PCI: Using configuration type 1 for base access
[ 0.872976] Setting up standard PCI resources
[ 0.876976] ACPI: EC: Look up EC in DSDT
[ 0.881027] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.887781] ACPI: Interpreter enabled
[ 0.887785] ACPI: (supports S0 S3 S4 S5)
[ 0.889510] ACPI: Using IOAPIC for interrupt routing
[ 0.891108] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.961515] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.961515] ACPI: EC: driver started in interrupt mode
[ 0.961515] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.961515] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.961515] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.961515] PCI: Transparent bridge - 0000:00:1e.0
[ 0.961515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.961944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.962128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.962315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.962502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.962700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.973516] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.973516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.973516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.973516] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.973516] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.973516] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.973516] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.973685] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.977516] ACPI: WMI: Mapper loaded
[ 0.977516] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.977516] pnp: PnP ACPI init
[ 0.977516] ACPI: bus type pnp registered
[ 1.002443] pnp: PnP ACPI: found 10 devices
[ 1.002443] ACPI: ACPI bus type pnp unregistered
[ 1.002443] SCSI subsystem initialized
[ 1.002443] libata version 3.00 loaded.
[ 1.002443] PCI: Using ACPI for IRQ routing
[ 1.012970] NET: Registered protocol family 8
[ 1.012973] NET: Registered protocol family 20
[ 1.030375] ACPI: RTC can wake from S4
[ 1.054312] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 1.054316] system 00:01: ioport range 0x600-0x60f has been reserved
[ 1.054319] system 00:01: ioport range 0x610-0x610 has been reserved
[ 1.054322] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.054325] system 00:01: ioport range 0x810-0x817 has been reserved
[ 1.054329] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.054332] system 00:01: ioport range 0x500-0x53f has been reserved
[ 1.054335] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.054339] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 1.054342] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 1.054346] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 1.054349] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 1.054353] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.054356] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 1.054360] system 00:01: iomem range 0x32000000-0x320000ff could not be reserved
[ 1.082445] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0
[ 1.082445] PCI: Bridge: 0000:00:01.0
[ 1.082445] IO window: 5000-5fff
[ 1.082445] MEM window: 0x90000000-0x92ffffff
[ 1.082445] PREFETCH window: 0x0000000080000000-0x000000008fffffff
[ 1.082445] PCI: Bridge: 0000:00:1c.0
[ 1.082445] IO window: 4000-4fff
[ 1.082445] MEM window: 0x9a300000-0x9b2fffff
[ 1.082445] PREFETCH window: 0x0000000093000000-0x0000000093ffffff
[ 1.082445] PCI: Bridge: 0000:00:1c.1
[ 1.082445] IO window: 3000-3fff
[ 1.082445] MEM window: 0x99300000-0x9a2fffff
[ 1.082445] PREFETCH window: 0x0000000094000000-0x0000000094ffffff
[ 1.082445] PCI: Bridge: 0000:00:1c.2
[ 1.082445] IO window: 2000-2fff
[ 1.082446] MEM window: 0x98200000-0x992fffff
[ 1.082446] PREFETCH window: 0x0000000095000000-0x0000000095ffffff
[ 1.082446] PCI: Bridge: 0000:00:1c.3
[ 1.082446] IO window: 1000-1fff
[ 1.082446] MEM window: 0x97100000-0x981fffff
[ 1.082446] PREFETCH window: 0x0000000096000000-0x0000000096ffffff
[ 1.082446] PCI: Bridge: 0000:00:1e.0
[ 1.082446] IO window: disabled.
[ 1.082446] MEM window: 0x97000000-0x970fffff
[ 1.082446] PREFETCH window: disabled.
[ 1.082446] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.082446] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.082446] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.082446] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.082446] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.082446] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.082446] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.082446] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.082446] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 1.082446] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.082446] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1.082446] NET: Registered protocol family 2
[ 1.133357] Switched to high resolution mode on CPU 1
[ 1.134995] Switched to high resolution mode on CPU 0
[ 1.154112] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.154112] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.154112] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.154112] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.154112] TCP reno registered
[ 1.177210] NET: Registered protocol family 1
[ 1.177325] checking if image is initramfs... it is
[ 2.945221] Freeing initrd memory: 17944k freed
[ 2.947568] audit: initializing netlink socket (disabled)
[ 2.947568] type=2000 audit(1213206338.312:1): initialized
[ 2.951571] highmem bounce pool size: 64 pages
[ 2.955568] VFS: Disk quotas dquot_6.5.1
[ 2.955568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.955568] msgmni has been set to 1747 for ipc namespace c04fe5c0
[ 2.955568] io scheduler noop registered
[ 2.955568] io scheduler anticipatory registered
[ 2.955568] io scheduler deadline registered
[ 2.955568] io scheduler cfq registered (default)
[ 2.955568] pci 0000:01:00.0: Boot video device
[ 2.955568] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.955568] assign_interrupt_mode Found MSI capability
[ 2.955568] Allocate Port Service[0000:00:01.0:pcie00]
[ 2.955568] Allocate Port Service[0000:00:01.0:pcie02]
[ 2.955568] Allocate Port Service[0000:00:01.0:pcie03]
[ 2.955568] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.955568] assign_interrupt_mode Found MSI capability
[ 2.955568] Allocate Port Service[0000:00:1c.0:pcie00]
[ 2.955569] Allocate Port Service[0000:00:1c.0:pcie02]
[ 2.955569] Allocate Port Service[0000:00:1c.0:pcie03]
[ 2.955569] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 2.955569] assign_interrupt_mode Found MSI capability
[ 2.955569] Allocate Port Service[0000:00:1c.1:pcie00]
[ 2.955569] Allocate Port Service[0000:00:1c.1:pcie02]
[ 2.955569] Allocate Port Service[0000:00:1c.1:pcie03]
[ 2.955569] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 2.955569] assign_interrupt_mode Found MSI capability
[ 2.955569] Allocate Port Service[0000:00:1c.2:pcie00]
[ 2.955569] Allocate Port Service[0000:00:1c.2:pcie02]
[ 2.955569] Allocate Port Service[0000:00:1c.2:pcie03]
[ 2.955569] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 2.955569] assign_interrupt_mode Found MSI capability
[ 2.955569] Allocate Port Service[0000:00:1c.3:pcie00]
[ 2.955569] Allocate Port Service[0000:00:1c.3:pcie02]
[ 2.955569] Allocate Port Service[0000:00:1c.3:pcie03]
[ 2.955569] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.955569] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.983568] vesafb: framebuffer at 0x91000000, mapped to 0xf8880000, using 6144k, total 14336k
[ 2.983568] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 2.983568] vesafb: protected mode interface info at c000:b900
[ 2.983568] vesafb: pmi: set display start = c00cb963, set palette = c00cb9be
[ 2.983568] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 2.983568] vesafb: scrolling: redraw
[ 2.983568] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.039567] Console: switching to colour frame buffer device 128x48
[ 3.091564] fb0: VESA VGA frame buffer device
[ 3.096220] ACPI: AC Adapter [AC] (on-line)
[ 3.120876] ACPI: Battery Slot [BAT0] (battery absent)
[ 3.124816] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.124816] ACPI: Power Button (FF) [PWRF]
[ 3.124816] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
[ 3.124816] ACPI: Power Button (CM) [PWRB]
[ 3.124816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
[ 3.124816] ACPI: Lid Switch [LID0]
[ 3.124816] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
[ 3.124816] ACPI: Sleep Button (CM) [SLPB]
[ 3.124816] ACPI: SSDT 7FE88C90, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 3.124816] ACPI: SSDT 7FE87610, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 3.124816] Monitor-Mwait will be used to enter C-1 state
[ 3.124816] Monitor-Mwait will be used to enter C-2 state
[ 3.124816] Monitor-Mwait will be used to enter C-3 state
[ 3.124816] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.124816] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.124816] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.128817] ACPI: SSDT 7FE88F10, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 3.128817] ACPI: SSDT 7FE8AD10, 0083 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 3.128817] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.128865] ACPI: ACPI0007:01 is registered as cooling_device1
[ 3.128870] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.151497] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 3.166274] ACPI: Thermal Zone [TZ01] (40 C)
[ 3.238273] Non-volatile memory driver v1.2
[ 3.238273] brd: module loaded
[ 3.238273] loop: module loaded
[ 3.238273] nbd: registered device at major 43
[ 3.243779] Driver 'sd' needs updating - please use bus_type methods
[ 3.243779] Driver 'sr' needs updating - please use bus_type methods
[ 3.243779] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.243779] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 3.295777] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[97000000-970007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.301370] video1394: Installed video1394 module
[ 3.301370] ieee1394: raw1394: /dev/raw1394 device initialized
[ 3.301370] NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
[ 3.301370] eth1394: eth0: IPv4 over IEEE 1394 (fw-host0)
[ 3.301370] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
[ 3.301370] INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
[ 3.301370] SSFDC read-only Flash Translation layer
[ 3.301370] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 3.340270] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.340276] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.344034] mice: PS/2 mouse device common for all mice
[ 3.344034] i2c /dev entries driver
[ 3.346025] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.372249] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.427242] EISA: Probing bus 0 at eisa.0
[ 3.427242] Cannot allocate resource for EISA slot 1
[ 3.427242] Cannot allocate resource for EISA slot 2
[ 3.427242] Cannot allocate resource for EISA slot 3
[ 3.427242] Cannot allocate resource for EISA slot 4
[ 3.427242] Cannot allocate resource for EISA slot 5
[ 3.427242] Cannot allocate resource for EISA slot 6
[ 3.427242] EISA: Detected 0 cards.
[ 3.427242] cpuidle: using governor ladder
[ 3.427242] cpuidle: using governor menu
[ 3.427242] sdhci: Secure Digital Host Controller Interface driver
[ 3.427242] sdhci: Copyright(c) Pierre Ossman
[ 3.427242] sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
[ 3.427242] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 3.428192] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.428200] PCI: Setting latency timer of device 0000:07:00.1 to 64
[ 3.424243] Marking TSC unstable due to: TSC halts in idle.
[ 3.428264] Registered led device: mmc0
[ 3.428287] mmc0: SDHCI at 0x97000b00 irq 22 DMA
[ 3.464305] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 3.464308] ALSA device list:
[ 3.464310] No soundcards found.
[ 3.464876] Using IPI No-Shortcut mode
[ 3.465090] registered taskstats version 1
[ 3.465213] /home/maxim/software/kernel/linux-2.6/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.465217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.465219] EDD information not available.
[ 3.465261] Freeing unused kernel memory: 368k freed
[ 4.187227] Clocksource tsc unstable (delta = -260807719 ns)
[ 4.353067] APIC error on CPU0: 00(40)
[ 4.632796] ieee1394: Host added: ID:BUS[0-00:1023] GUID[b64057b700023f7c]
[ 4.772237] fuse init (API version 7.9)
[ 4.878962] usbcore: registered new interface driver usbfs
[ 4.878962] usbcore: registered new interface driver hub
[ 4.883158] usbcore: registered new device driver usb
[ 4.883158] USB Universal Host Controller Interface driver v3.0
[ 4.883158] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.883158] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 4.883158] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.883158] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.883158] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
[ 4.887470] usb usb1: configuration #1 chosen from 1 choice
[ 4.887500] hub 1-0:1.0: USB hub found
[ 4.887507] hub 1-0:1.0: 2 ports detected
[ 4.937650] APIC error on CPU0: 40(40)
[ 4.993744] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.993760] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 4.993765] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.993791] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 4.993828] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
[ 4.993939] usb usb2: configuration #1 chosen from 1 choice
[ 4.993971] hub 2-0:1.0: USB hub found
[ 4.993978] hub 2-0:1.0: 2 ports detected
[ 5.106060] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.106060] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 5.106060] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.106060] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 5.110059] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.110059] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 5.110059] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9b304c00
[ 5.126765] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.126890] usb usb3: configuration #1 chosen from 1 choice
[ 5.126923] hub 3-0:1.0: USB hub found
[ 5.126932] hub 3-0:1.0: 4 ports detected
[ 5.236005] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 5.236005] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.236005] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.236005] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.236005] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
[ 5.236005] usb usb4: configuration #1 chosen from 1 choice
[ 5.236005] hub 4-0:1.0: USB hub found
[ 5.236005] hub 4-0:1.0: 2 ports detected
[ 5.342535] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.342535] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.342535] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.342535] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.342535] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
[ 5.342535] usb usb5: configuration #1 chosen from 1 choice
[ 5.342535] hub 5-0:1.0: USB hub found
[ 5.342535] hub 5-0:1.0: 2 ports detected
[ 5.450248] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.450248] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.450248] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.450248] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.450248] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 5.450248] usb usb6: configuration #1 chosen from 1 choice
[ 5.450248] hub 6-0:1.0: USB hub found
[ 5.450248] hub 6-0:1.0: 2 ports detected
[ 5.553538] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 5.553538] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.553538] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.553538] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 5.555539] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.555547] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 5.555553] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x9b304800
[ 5.573706] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.574279] usb usb7: configuration #1 chosen from 1 choice
[ 5.574327] hub 7-0:1.0: USB hub found
[ 5.574341] hub 7-0:1.0: 6 ports detected
[ 5.676529] ata_piix 0000:00:1f.1: version 2.12
[ 5.676529] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.676529] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 5.676529] scsi0 : ata_piix
[ 5.676529] scsi1 : ata_piix
[ 5.676529] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
[ 5.676529] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
[ 5.840688] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[ 5.856575] ata1.00: configured for UDMA/33
[ 5.948734] usb 7-4: new high speed USB device using ehci_hcd and address 2
[ 6.046598] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
[ 6.060169] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.060169] Uniform CD-ROM driver Revision: 3.20
[ 6.060169] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.060169] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.060420] ahci 0000:00:1f.2: version 3.0
[ 6.060420] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.094890] usb 7-4: configuration #1 chosen from 1 choice
[ 6.525684] APIC error on CPU0: 40(40)
[ 7.077302] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
[ 7.077309] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 7.077319] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 7.081281] scsi2 : ahci
[ 7.081281] scsi3 : ahci
[ 7.081281] scsi4 : ahci
[ 7.081281] ata3: SATA max UDMA/133 abar m2048@0x9b304000 port 0x9b304100 irq 218
[ 7.081281] ata4: SATA max UDMA/133 abar m2048@0x9b304000 port 0x9b304180 irq 218
[ 7.081281] ata5: DUMMY
[ 7.407172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.407962] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 7.788416] ata3.00: ATA-8: TOSHIBA MK1646GSX, LB113J, max UDMA/100
[ 7.788416] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.789908] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 7.790616] ata3.00: configured for UDMA/100
[ 8.109551] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.107954] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[ 8.107954] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 8.107954] sd 2:0:0:0: [sda] Write Protect is off
[ 8.107954] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.107954] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.107954] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 8.107954] sd 2:0:0:0: [sda] Write Protect is off
[ 8.107954] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.107954] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.107954] sda: sda1 sda2 sda3 sda4
[ 8.215293] sd 2:0:0:0: [sda] Attached SCSI disk
[ 8.215293] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8.639463] PM: Starting manual resume from disk
[ 8.639463] PM: Resume from partition 8:3
[ 8.639463] PM: Checking hibernation image.
[ 8.639898] PM: Resume from disk failed.
[ 8.659499] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.659499] EXT3-fs: write access will be enabled during recovery.
[ 9.879898] EXT3-fs: sda4: orphan cleanup on readonly fs
[ 9.879898] ext3_orphan_cleanup: deleting unreferenced inode 2302780
[ 9.879898] ext3_orphan_cleanup: deleting unreferenced inode 81941
[ 9.879898] EXT3-fs: sda4: 2 orphan inodes deleted
[ 9.879898] EXT3-fs: recovery complete.
[ 9.879898] kjournald starting. Commit interval 5 seconds
[ 9.908146] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.970367] APIC error on CPU0: 40(40)
[ 16.579513] nvidia: module license 'NVIDIA' taints kernel.
[ 16.738573] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
[ 16.738573] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 16.738573] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 16.738573] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 16.738573] iwl3945: Detected Intel Wireless WiFi Link 3945BG
[ 16.773771] iTCO_vendor_support: vendor-support=0
[ 16.824683] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 16.824795] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 16.824849] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.996859] iwl3945: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 17.025722] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.031377] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
[ 17.055173] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 17.316131] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.316144] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 17.316578] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.05 Mon May 19 00:06:12 PDT 2008
[ 17.697879] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[ 17.756691] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 17.756691] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.766922] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 19.125978] Adding 2923820k swap on /dev/sda3. Priority:-1 extents:1 across:2923820k
[ 27.566350] APIC error on CPU0: 40(40)
[ 28.644850] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 28.645043] EXT3 FS on sda4, internal journal
[ 29.669395] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.842283] sensors[3549]: segfault at 46 ip b7e792cd sp bf8a5d50 error 4 in libc-2.7.so[b7e1f000+149000]
[ 29.843635] sensors[3550]: segfault at 46 ip b7ec42cd sp bfaf2fa0 error 4 in libc-2.7.so[b7e6a000+149000]
[ 31.193512] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 32.951283] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 32.951283] PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100002, writing 100006)
[ 32.951283] firmware: requesting iwlwifi-3945-1.ucode
[ 33.143609] Bluetooth: Core ver 2.11
[ 33.145706] NET: Registered protocol family 31
[ 33.145984] Bluetooth: HCI device and connection manager initialized
[ 33.146308] Bluetooth: HCI socket layer initialized
[ 33.196390] Bluetooth: L2CAP ver 2.9
[ 33.196390] Bluetooth: L2CAP socket layer initialized
[ 33.357103] Bluetooth: RFCOMM socket layer initialized
[ 33.357136] Bluetooth: RFCOMM TTY layer initialized
[ 33.357140] Bluetooth: RFCOMM ver 1.8
[ 35.015773] NET: Registered protocol family 10
[ 35.015773] lo: Disabled Privacy Extensions
[ 35.019449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 60.167205] CPU0 attaching NULL sched-domain.
[ 60.167215] CPU1 attaching NULL sched-domain.
[ 60.168965] CPU0 attaching sched-domain:
[ 60.168965] domain 0: span 0-1
[ 60.168965] groups: 0 1
[ 60.168965] CPU1 attaching sched-domain:
[ 60.168965] domain 0: span 0-1
[ 60.168965] groups: 1 0
[ 60.714050] NET: Registered protocol family 17
[ 61.517941] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 65.315001] APIC error on CPU0: 40(40)
[ 65.789312] APIC error on CPU0: 40(40)
[ 84.701358] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 84.701358] PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100002, writing 100006)
[ 84.778095] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 87.270433] wlan0: Initial auth_alg=0
[ 87.270433] wlan0: authenticate with AP 00:1b:9e:d8:77:02
[ 87.273477] wlan0: RX authentication from 00:1b:9e:d8:77:02 (alg=0 transaction=2 status=0)
[ 87.273477] wlan0: authenticated
[ 87.273477] wlan0: associate with AP 00:1b:9e:d8:77:02
[ 87.275823] wlan0: RX AssocResp from 00:1b:9e:d8:77:02 (capab=0x411 status=0 aid=1)
[ 87.275823] wlan0: associated
[ 87.275823] wlan0: switched to short barker preamble (BSSID=00:1b:9e:d8:77:02)
[ 87.276185] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 92.713277] APIC error on CPU0: 40(40)
[ 97.885625] wlan0: no IPv6 routers present
[ 111.766658] wlan0: no IPv6 routers present
[ 112.121332] APIC error on CPU0: 40(40)
[ 144.876825] APIC error on CPU0: 40(40)
[ 158.676958] APIC error on CPU0: 40(40)
[ 212.915533] APIC error on CPU0: 40(40)
[ 290.079923] APIC error on CPU0: 40(40)
[ 290.632507] APIC error on CPU0: 40(40)
[ 296.557068] APIC error on CPU0: 40(40)
[ 303.989147] APIC error on CPU0: 40(40)
[ 305.782793] APIC error on CPU0: 40(40)
[ 307.150566] APIC error on CPU0: 40(40)
[ 310.248346] APIC error on CPU0: 40(40)
[ 310.657006] APIC error on CPU0: 40(40)
[ 311.453595] APIC error on CPU0: 40(40)
[ 317.468024] APIC error on CPU0: 40(40)
[ 321.284080] APIC error on CPU0: 40(40)
[ 328.179853] APIC error on CPU0: 40(40)
[ 330.127038] APIC error on CPU0: 40(40)
[ 332.437435] APIC error on CPU0: 40(40)
[ 335.326931] APIC error on CPU0: 40(40)
[ 335.881538] APIC error on CPU0: 40(40)
[ 337.790227] APIC error on CPU0: 40(40)
[ 368.373446] APIC error on CPU0: 40(40)
[ 369.809138] APIC error on CPU0: 40(40)
[ 374.289855] APIC error on CPU0: 40(40)
[ 375.768238] APIC error on CPU0: 40(40)
[ 382.440748] APIC error on CPU0: 40(40)
[ 383.159443] APIC error on CPU0: 40(40)
[ 383.529522] APIC error on CPU0: 40(40)
[ 383.906913] APIC error on CPU0: 40(40)
[ 384.356990] APIC error on CPU0: 40(40)
[ 384.610941] APIC error on CPU0: 40(40)
[ 386.305185] APIC error on CPU0: 40(40)
[ 386.935949] APIC error on CPU0: 40(40)
[ 390.071741] APIC error on CPU0: 40(40)
[ 390.403979] APIC error on CPU0: 40(40)
[ 391.114519] APIC error on CPU0: 40(40)
[ 391.528138] APIC error on CPU0: 40(40)
[ 403.677688] APIC error on CPU0: 40(40)
[ 404.140181] APIC error on CPU0: 40(40)
[ 406.270920] APIC error on CPU0: 40(40)
[ 406.927867] APIC error on CPU0: 40(40)
[ 418.880757] APIC error on CPU0: 40(40)
[ 419.235211] APIC error on CPU0: 40(40)
[ 437.974455] APIC error on CPU0: 40(40)
[ 438.193878] APIC error on CPU0: 40(40)
[ 443.974790] APIC error on CPU0: 40(40)
[ 444.177027] APIC error on CPU0: 40(40)
[ 479.469645] APIC error on CPU0: 40(40)
[ 479.720979] APIC error on CPU0: 40(40)
[ 497.925734] APIC error on CPU0: 40(40)
[ 498.202985] APIC error on CPU0: 40(40)
[ 526.922424] APIC error on CPU0: 40(40)
[ 527.607409] APIC error on CPU0: 40(40)
[ 715.960235] APIC error on CPU0: 40(40)
[ 716.232556] APIC error on CPU0: 40(40)
[ 753.480442] APIC error on CPU0: 40(40)
[ 753.820830] APIC error on CPU0: 40(40)
[ 774.693756] APIC error on CPU0: 40(40)
[ 774.867494] APIC error on CPU0: 40(40)
[ 815.787137] APIC error on CPU0: 40(40)
[ 816.308363] APIC error on CPU0: 40(40)
[ 841.546917] APIC error on CPU0: 40(40)
[ 842.082173] APIC error on CPU0: 40(40)
[ 847.758887] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 857.924362] APIC error on CPU0: 40(40)
[ 859.141021] APIC error on CPU0: 40(40)
[ 863.096755] APIC error on CPU0: 40(40)
[ 863.468026] APIC error on CPU0: 40(40)
[ 872.206205] APIC error on CPU0: 40(40)
[ 872.563850] APIC error on CPU0: 40(40)
[ 884.523961] APIC error on CPU0: 40(40)
[ 884.642784] APIC error on CPU0: 40(40)
[ 894.188583] APIC error on CPU0: 40(40)
[ 894.546067] APIC error on CPU0: 40(40)
[ 899.663115] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
[ 899.663115] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 899.663115] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 899.663115] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 899.663115] iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00001000
[ 899.663115] iwl3945: U iwl3945_pci_probe pci_resource_base = f903c000
[ 899.663115] iwl3945: Detected Intel Wireless WiFi Link 3945BG
[ 899.663115] iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [0]
[ 899.743741] iwl3945: U iwl3945_pci_probe MAC address: 00:1b:77:f1:7c:29
[ 899.743741] iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM
[ 899.743741] iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels.
[ 899.743741] iwl3945: U iwl3945_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.743813] iwl3945: U iwl3945_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.744078] iwl3945: U iwl3945_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.744345] iwl3945: U iwl3945_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.744611] iwl3945: U iwl3945_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x21 15dBm): Ad-Hoc not supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x21 15dBm): Ad-Hoc not supported
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
[ 899.747743] iwl3945: U iwl3945_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
[ 899.747854] iwl3945: U iwl3945_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
[ 899.748064] iwl3945: U iwl3945_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
[ 899.748275] iwl3945: U iwl3945_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
[ 899.748483] iwl3945: U iwl3945_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
[ 899.748694] iwl3945: U iwl3945_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
[ 899.751742] iwl3945: U iwl3945_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
[ 899.751742] iwl3945: U iwl3945_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
[ 899.751743] iwl3945: U iwl3945_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
[ 899.752264] iwl3945: U iwl3945_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 36 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 40 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 44 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 48 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 52 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 56 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 60 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 64 Flags 0 [5.2GHz] - No traffic
[ 899.755743] iwl3945: U iwl3945_init_channel_map Ch. 100 Flags 0 [5.2GHz] - No traffic
[ 899.755818] iwl3945: U iwl3945_init_channel_map Ch. 104 Flags 0 [5.2GHz] - No traffic
[ 899.756043] iwl3945: U iwl3945_init_channel_map Ch. 108 Flags 0 [5.2GHz] - No traffic
[ 899.756254] iwl3945: U iwl3945_init_channel_map Ch. 112 Flags 0 [5.2GHz] - No traffic
[ 899.756463] iwl3945: U iwl3945_init_channel_map Ch. 116 Flags 0 [5.2GHz] - No traffic
[ 899.756672] iwl3945: U iwl3945_init_channel_map Ch. 120 Flags 0 [5.2GHz] - No traffic
[ 899.759741] iwl3945: U iwl3945_init_channel_map Ch. 124 Flags 0 [5.2GHz] - No traffic
[ 899.759742] iwl3945: U iwl3945_init_channel_map Ch. 128 Flags 0 [5.2GHz] - No traffic
[ 899.759742] iwl3945: U iwl3945_init_channel_map Ch. 132 Flags 0 [5.2GHz] - No traffic
[ 899.760318] iwl3945: U iwl3945_init_channel_map Ch. 136 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 140 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 149 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 153 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 157 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 161 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_init_channel_map Ch. 165 Flags 0 [5.2GHz] - No traffic
[ 899.763744] iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 260
[ 899.763744] iwl3945: U iwl3945_hw_reg_init_channel_groups Initializing factory calib info from EEPROM
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 1 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 1: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 2 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 2: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 3 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 3: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 4 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 4: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 5 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 5: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 6 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 6: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 7 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 7: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 8 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 8: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 9 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 9: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 10 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 10: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 11 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 11: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 12 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 12: -22 [260]
[ 899.763744] iwl3945: U iwl3945_hw_reg_get_ch_grp_index Chnl 13 mapped to grp 0
[ 899.763744] iwl3945: U iwl3945_txpower_set_from_eeprom Delta index for channel 13: -22 [260]
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=00
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=06
[ 899.763744] iwl3945: U iwl3945_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=06
[ 899.763744] iwl3945: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 899.775743] phy1: Selected rate control algorithm 'iwl-3945-rs'
[ 899.807745] iwl3945: U iwl3945_mac_start enter
[ 899.807745] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 899.807745] firmware: requesting iwlwifi-3945-1.ucode
[ 899.827745] iwl3945: U iwl3945_read_ucode Got firmware 'iwlwifi-3945-1.ucode' file (149652 bytes) from disk
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr ucode version = 0x20e0105
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr runtime inst size = 80524
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr runtime data size = 32768
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr init inst size = 2668
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr init data size = 32768
[ 899.827745] iwl3945: U iwl3945_read_ucode f/w package hdr boot inst size = 900
[ 899.827745] iwl3945: U iwl3945_read_ucode Copying (but not loading) uCode instr len 80524
[ 899.827745] iwl3945: U iwl3945_read_ucode uCode instr buf vaddr = 0xec720000, paddr = 0x2c720000
[ 899.827745] iwl3945: U iwl3945_read_ucode Copying (but not loading) uCode data len 32768
[ 899.827745] iwl3945: U iwl3945_read_ucode Copying (but not loading) init instr len 2668
[ 899.827745] iwl3945: U iwl3945_read_ucode Copying (but not loading) init data len 32768
[ 899.827745] iwl3945: U iwl3945_read_ucode Copying (but not loading) boot instr len 900
[ 899.827745] iwl3945: U iwl3945_power_init_handle Initialize power
[ 899.827745] iwl3945: U iwl3945_power_init_handle adjust power command flags
[ 899.827745] iwl3945: U iwl3945_hw_nic_init HW Revision ID = 0x2
[ 899.827745] iwl3945: U iwl3945_hw_nic_init 3945 RADIO-MM type
[ 899.827745] iwl3945: U iwl3945_hw_nic_init SKU OP mode is basic
[ 899.827745] iwl3945: U iwl3945_hw_nic_init 3945ABG revision is 0xF1
[ 899.827745] iwl3945: U iwl3945_hw_nic_init Card M type B version is 0x2
[ 899.827929] iwl3945: U iwl3945_load_bsm Begin load bsm
[ 899.831773] iwl3945: U iwl3945_verify_bsm Begin verify bsm
[ 899.831773] iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK
[ 899.831773] iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations
[ 899.831773] iwl3945: U __iwl3945_up iwl3945 is coming up
[ 899.831773] iwl3945: U iwl3945_mac_start Start UP work.
[ 899.843748] iwl3945: I iwl3945_rx_handle r = 1, i = 0, REPLY_ALIVE, 0x01
[ 899.843748] iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
[ 899.843748] iwl3945: I iwl3945_rx_reply_alive Initialization Alive received.
[ 899.851791] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
[ 899.851886] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
[ 899.852163] iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM
[ 899.852166] iwl3945: U iwl3945_init_alive_start Initialization Alive received.
[ 899.852212] iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.
[ 899.856566] iwl3945: I iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01
[ 899.856579] iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
[ 899.856582] iwl3945: I iwl3945_rx_reply_alive Runtime Alive received.
[ 899.856625] iwl3945: I iwl3945_disable_events Selected uCode log events may be disabled
[ 899.856627] iwl3945: I iwl3945_disable_events by writing "1"s into disable bitmap
[ 899.856630] iwl3945: I iwl3945_disable_events in SRAM at 0x8015f4, size 47 u32s
[ 899.871747] iwl3945: U iwl3945_alive_start Runtime Alive received.
[ 899.871747] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
[ 899.871747] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
[ 899.871747] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524
[ 899.879745] iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM
[ 899.879745] iwl3945: U iwl3945_alive_start RFKILL status: 0x1
[ 899.879745] iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008
[ 899.879745] iwl3945: U iwl3945_update_power_cmd Tx timeout = 0
[ 899.879745] iwl3945: U iwl3945_update_power_cmd Rx timeout = 0
[ 899.879745] iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
[ 899.879745] iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4
[ 899.879745] iwl3945: I iwl3945_rx_handle r 3 i 2 No handler needed for POWER_TABLE_CMD, 0x77
[ 899.879745] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4
[ 899.879766] iwl3945: I iwl3945_rx_handle r 4 i 3 No handler needed for REPLY_BT_CONFIG, 0x9b
[ 899.880124] iwl3945: U iwl3945_commit_rxon Sending RXON
[ 899.880126] * without RXON_FILTER_ASSOC_MSK
[ 899.880127] * channel = 1
[ 899.880128] * bssid = 00:00:00:00:00:00
[ 899.880135] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4
[ 899.883742] iwl3945: I iwl3945_rx_handle r 5 i 4 No handler needed for REPLY_RXON, 0x10
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x0d
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x0f
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x05
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x07
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x09
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x0b
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 119 rate code 0x01
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 243 dsp 111 rate code 0x03
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 147 dsp 125 rate code 0x0a
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 147 dsp 125 rate code 0x14
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 147 dsp 125 rate code 0x37
[ 899.883742] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 147 dsp 125 rate code 0x6e
[ 899.883742] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0403, 56 bytes at 3[3]:4
[ 899.883742] iwl3945: I iwl3945_rx_handle r 6 i 5 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 899.884364] iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
[ 899.884373] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0404, 68 bytes at 4[4]:4
[ 899.884440] iwl3945: I iwl3945_rx_handle r = 7, i = 6, REPLY_ADD_STA, 0x18
[ 899.887743] iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
[ 899.887743] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0405, 56 bytes at 5[5]:4
[ 899.887743] iwl3945: I iwl3945_rx_handle r 8 i 7 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.887743] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0406, 56 bytes at 6[6]:4
[ 899.887743] iwl3945: I iwl3945_rx_handle r 9 i 8 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.887743] iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 92
[ 899.887743] iwl3945: U is_temp_calib_needed Getting cooler, delta -168,
[ 899.887743] iwl3945: U is_temp_calib_needed Timed thermal calib needed
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 115 rate code 0x03
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37
[ 899.887743] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e
[ 899.887743] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0407, 56 bytes at 7[7]:4
[ 899.890950] iwl3945: I iwl3945_rx_handle r 10 i 9 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 899.893367] iwl3945: U iwl3945_alive_start ALIVE processing complete.
[ 899.895089] iwl3945: U iwl3945_mac_start leave
[ 899.895089] iwl3945: U iwl3945_mac_add_interface enter: type 2
[ 899.895089] iwl3945: U iwl3945_mac_add_interface Set: 00:1b:77:f1:7c:29
[ 899.895089] iwl3945: U iwl3945_commit_rxon Sending RXON
[ 899.895089] * without RXON_FILTER_ASSOC_MSK
[ 899.895089] * channel = 1
[ 899.895089] * bssid = 00:00:00:00:00:00
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0408, 48 bytes at 8[8]:4
[ 899.893367] iwl3945: I iwl3945_rx_handle r 11 i 10 No handler needed for REPLY_RXON, 0x10
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 115 rate code 0x03
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0409, 56 bytes at 9[9]:4
[ 899.895089] iwl3945: I iwl3945_rx_handle r 12 i 11 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 899.895089] iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x040A, 68 bytes at 10[10]:4
[ 899.893367] iwl3945: I iwl3945_rx_handle r = 13, i = 12, REPLY_ADD_STA, 0x18
[ 899.895089] iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x040B, 56 bytes at 11[11]:4
[ 899.895089] iwl3945: I iwl3945_rx_handle r 14 i 13 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x040C, 56 bytes at 12[12]:4
[ 899.893367] iwl3945: I iwl3945_rx_handle r 15 i 14 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.895089] iwl3945: U iwl3945_mac_add_interface leave
[ 899.895089] iwl3945: U iwl3945_mac_config_interface bssid: 00:00:00:00:00:00
[ 899.895089] iwl3945: U iwl3945_commit_rxon Sending RXON
[ 899.895089] * without RXON_FILTER_ASSOC_MSK
[ 899.895089] * channel = 1
[ 899.895089] * bssid = 00:00:00:00:00:00
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x040D, 48 bytes at 13[13]:4
[ 899.895089] iwl3945: I iwl3945_rx_handle r 16 i 15 No handler needed for REPLY_RXON, 0x10
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 115 rate code 0x03
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37
[ 899.895089] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x040E, 56 bytes at 14[14]:4
[ 899.893367] iwl3945: I iwl3945_rx_handle r 17 i 16 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 899.895089] iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x040F, 68 bytes at 15[15]:4
[ 899.895089] iwl3945: I iwl3945_rx_handle r = 18, i = 17, REPLY_ADD_STA, 0x18
[ 899.895089] iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0410, 56 bytes at 16[16]:4
[ 899.893367] iwl3945: I iwl3945_rx_handle r 19 i 18 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.895089] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0411, 56 bytes at 17[17]:4
[ 899.895089] iwl3945: I iwl3945_rx_handle r 20 i 19 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.895089] iwl3945: U iwl3945_mac_config_interface leave
[ 899.936140] iwl3945: U iwl3945_mac_config enter to channel 1
[ 899.936155] iwl3945: U iwl3945_commit_rxon Sending RXON
[ 899.936157] * without RXON_FILTER_ASSOC_MSK
[ 899.936158] * channel = 1
[ 899.936159] * bssid = 00:00:00:00:00:00
[ 899.936165] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0412, 48 bytes at 18[18]:4
[ 899.936339] iwl3945: I iwl3945_rx_handle r 21 i 20 No handler needed for REPLY_RXON, 0x10
[ 899.936359] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d
[ 899.936363] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f
[ 899.936366] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05
[ 899.936369] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07
[ 899.936372] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09
[ 899.936375] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b
[ 899.936379] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01
[ 899.936382] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 115 rate code 0x03
[ 899.936385] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a
[ 899.936388] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14
[ 899.936391] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37
[ 899.936395] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e
[ 899.936399] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0413, 56 bytes at 19[19]:4
[ 899.937371] iwl3945: I iwl3945_rx_handle r 22 i 21 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 899.938499] iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
[ 899.938504] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0414, 68 bytes at 20[20]:4
[ 899.938570] iwl3945: I iwl3945_rx_handle r = 23, i = 22, REPLY_ADD_STA, 0x18
[ 899.938581] iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
[ 899.938587] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0415, 56 bytes at 21[21]:4
[ 899.937371] iwl3945: I iwl3945_rx_handle r 24 i 23 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.939092] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0416, 56 bytes at 22[22]:4
[ 899.939092] iwl3945: I iwl3945_rx_handle r 25 i 24 No handler needed for REPLY_RATE_SCALE, 0x47
[ 899.939092] iwl3945: U iwl3945_mac_config leave
[ 899.939092] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 899.951057] iwl3945: I iwl3945_rx_handle r = 26, i = 25, REPLY_3945_RX, 0x1b
[ 900.056217] iwl3945: I iwl3945_rx_handle r = 27, i = 26, REPLY_3945_RX, 0x1b
[ 900.162576] iwl3945: I iwl3945_rx_handle r = 28, i = 27, REPLY_3945_RX, 0x1b
[ 900.265816] iwl3945: I iwl3945_rx_handle r = 29, i = 28, REPLY_3945_RX, 0x1b
[ 900.369813] iwl3945: I iwl3945_rx_handle r = 30, i = 29, REPLY_3945_RX, 0x1b
[ 900.474301] iwl3945: I iwl3945_rx_handle r = 31, i = 30, REPLY_3945_RX, 0x1b
[ 900.578602] iwl3945: I iwl3945_rx_handle r = 32, i = 31, REPLY_3945_RX, 0x1b
[ 900.605371] iwl3945: U iwl3945_mac_hw_scan enter
[ 900.605605] iwl3945: U iwl3945_scan_initiate Starting scan...
[ 900.605614] iwl3945: U iwl3945_mac_hw_scan leave
[ 900.605882] iwl3945: U iwl3945_bg_request_scan Kicking off one indirect scan.
[ 900.605882] iwl3945: U iwl3945_get_channels_for_scan Scanning 1 [PASSIVE 120]
[ 900.605882] iwl3945: U iwl3945_get_channels_for_scan Scanning 2 [PASSIVE 120]
[ 900.606086] iwl3945: U iwl3945_get_channels_for_scan Scanning 3 [PASSIVE 120]
[ 900.606285] iwl3945: U iwl3945_get_channels_for_scan Scanning 4 [PASSIVE 120]
[ 900.606484] iwl3945: U iwl3945_get_channels_for_scan Scanning 5 [PASSIVE 120]
[ 900.606682] iwl3945: U iwl3945_get_channels_for_scan Scanning 6 [PASSIVE 120]
[ 900.606882] iwl3945: U iwl3945_get_channels_for_scan Scanning 7 [PASSIVE 120]
[ 900.608617] iwl3945: U iwl3945_get_channels_for_scan Scanning 8 [PASSIVE 120]
[ 900.608815] iwl3945: U iwl3945_get_channels_for_scan Scanning 9 [PASSIVE 120]
[ 900.609013] iwl3945: U iwl3945_get_channels_for_scan Scanning 10 [PASSIVE 120]
[ 900.609214] iwl3945: U iwl3945_get_channels_for_scan Scanning 11 [PASSIVE 120]
[ 900.609413] iwl3945: U iwl3945_get_channels_for_scan total channels to scan 11
[ 900.609620] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4417, 350 bytes at 23[32]:4
[ 900.609933] iwl3945: I iwl3945_rx_handle r = 33, i = 32, REPLY_SCAN_CMD, 0x80
[ 900.610798] iwl3945: I iwl3945_rx_handle r = 35, i = 33, STATISTICS_NOTIFICATION, 0x9d
[ 900.610807] iwl3945: I iwl3945_rx_handle r = 35, i = 34, SCAN_START_NOTIFICATION, 0x82
[ 900.610811] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 1 [802.11bg] (TSF: 0x00000000:000A09FD) - 1 (beacon timer 100722179)
[ 900.686927] iwl3945: I iwl3945_rx_handle r = 36, i = 35, REPLY_3945_RX, 0x1b
[ 900.742098] iwl3945: I iwl3945_rx_handle r = 37, i = 36, SCAN_RESULTS_NOTIFICATION, 0x83
[ 900.742098] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 1 [802.11bg] (TSF: 0x00000000:000BEA10) - 1 elapsed=122899 usec (584872ms since last)
[ 900.742098] iwl3945: I iwl3945_rx_handle r = 39, i = 37, STATISTICS_NOTIFICATION, 0x9d
[ 900.742098] iwl3945: I iwl3945_rx_handle r = 39, i = 38, SCAN_START_NOTIFICATION, 0x82
[ 900.742098] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 2 [802.11bg] (TSF: 0x00000000:000BEE20) - 1 (beacon timer 117477856)
[ 900.796556] iwl3945: I iwl3945_rx_handle r = 40, i = 39, REPLY_3945_RX, 0x1b
[ 900.865889] iwl3945: I iwl3945_rx_handle r = 41, i = 40, SCAN_RESULTS_NOTIFICATION, 0x83
[ 900.865903] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 2 [802.11bg] (TSF: 0x00000000:000DCE36) - 1 elapsed=122902 usec (124ms since last)
[ 900.867478] iwl3945: I iwl3945_rx_handle r = 43, i = 41, STATISTICS_NOTIFICATION, 0x9d
[ 900.867489] iwl3945: I iwl3945_rx_handle r = 43, i = 42, SCAN_START_NOTIFICATION, 0x82
[ 900.867494] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 3 [802.11bg] (TSF: 0x00000000:000DD223) - 1 (beacon timer 134233565)
[ 900.899136] iwl3945: I iwl3945_rx_handle r = 44, i = 43, REPLY_3945_RX, 0x1b
[ 900.992908] iwl3945: I iwl3945_rx_handle r = 45, i = 44, SCAN_RESULTS_NOTIFICATION, 0x83
[ 900.992908] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 3 [802.11bg] (TSF: 0x00000000:000FB23A) - 1 elapsed=122903 usec (124ms since last)
[ 900.995107] iwl3945: I iwl3945_rx_handle r = 47, i = 45, STATISTICS_NOTIFICATION, 0x9d
[ 900.995118] iwl3945: I iwl3945_rx_handle r = 47, i = 46, SCAN_START_NOTIFICATION, 0x82
[ 900.995122] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 4 [802.11bg] (TSF: 0x00000000:000FB66C) - 1 (beacon timer 167868820)
[ 901.004721] iwl3945: I iwl3945_rx_handle r = 48, i = 47, REPLY_3945_RX, 0x1b
[ 901.105558] iwl3945: I iwl3945_rx_handle r = 49, i = 48, REPLY_3945_RX, 0x1b
[ 901.118025] iwl3945: I iwl3945_rx_handle r = 50, i = 49, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.118040] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 4 [802.11bg] (TSF: 0x00000000:00119685) - 2 elapsed=122905 usec (124ms since last)
[ 901.119108] iwl3945: I iwl3945_rx_handle r = 52, i = 50, STATISTICS_NOTIFICATION, 0x9d
[ 901.119118] iwl3945: I iwl3945_rx_handle r = 52, i = 51, SCAN_START_NOTIFICATION, 0x82
[ 901.119123] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 5 [802.11bg] (TSF: 0x00000000:00119AD0) - 1 (beacon timer 184624432)
[ 901.136361] iwl3945: I iwl3945_rx_handle r = 53, i = 52, REPLY_3945_RX, 0x1b
[ 901.239017] iwl3945: I iwl3945_rx_handle r = 54, i = 53, REPLY_3945_RX, 0x1b
[ 901.242024] iwl3945: I iwl3945_rx_handle r = 55, i = 54, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.242032] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 5 [802.11bg] (TSF: 0x00000000:00137AE7) - 2 elapsed=122903 usec (124ms since last)
[ 901.243100] iwl3945: I iwl3945_rx_handle r = 57, i = 55, STATISTICS_NOTIFICATION, 0x9d
[ 901.243107] iwl3945: I iwl3945_rx_handle r = 57, i = 56, SCAN_START_NOTIFICATION, 0x82
[ 901.243111] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 6 [802.11bg] (TSF: 0x00000000:00137EED) - 1 (beacon timer 201380115)
[ 901.345548] iwl3945: I iwl3945_rx_handle r = 58, i = 57, REPLY_3945_RX, 0x1b
[ 901.369030] iwl3945: I iwl3945_rx_handle r = 59, i = 58, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.369043] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 6 [802.11bg] (TSF: 0x00000000:00155EFC) - 1 elapsed=122895 usec (124ms since last)
[ 901.371302] iwl3945: I iwl3945_rx_handle r = 61, i = 59, STATISTICS_NOTIFICATION, 0x9d
[ 901.371308] iwl3945: I iwl3945_rx_handle r = 61, i = 60, SCAN_START_NOTIFICATION, 0x82
[ 901.371313] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 7 [802.11bg] (TSF: 0x00000000:001563CA) - 1 (beacon timer 218135606)
[ 901.448243] iwl3945: I iwl3945_rx_handle r = 62, i = 61, REPLY_3945_RX, 0x1b
[ 901.500938] iwl3945: I iwl3945_rx_handle r = 63, i = 62, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.500938] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 7 [802.11bg] (TSF: 0x00000000:001743E3) - 1 elapsed=122905 usec (124ms since last)
[ 901.500938] iwl3945: I iwl3945_rx_handle r = 65, i = 63, STATISTICS_NOTIFICATION, 0x9d
[ 901.500938] iwl3945: I iwl3945_rx_handle r = 65, i = 64, SCAN_START_NOTIFICATION, 0x82
[ 901.500938] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 8 [802.11bg] (TSF: 0x00000000:0017483B) - 1 (beacon timer 234891205)
[ 901.521280] iwl3945: I iwl3945_rx_handle r = 66, i = 65, REPLY_3945_RX, 0x1b
[ 901.556950] iwl3945: I iwl3945_rx_handle r = 67, i = 66, REPLY_3945_RX, 0x1b
[ 901.627376] iwl3945: I iwl3945_rx_handle r = 68, i = 67, REPLY_3945_RX, 0x1b
[ 901.628574] iwl3945: I iwl3945_rx_handle r = 69, i = 68, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.628585] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 8 [802.11bg] (TSF: 0x00000000:0019284F) - 3 elapsed=122900 usec (124ms since last)
[ 901.629717] iwl3945: I iwl3945_rx_handle r = 71, i = 69, STATISTICS_NOTIFICATION, 0x9d
[ 901.629717] iwl3945: I iwl3945_rx_handle r = 71, i = 70, SCAN_START_NOTIFICATION, 0x82
[ 901.629717] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 9 [802.11bg] (TSF: 0x00000000:00192C51) - 1 (beacon timer 268526511)
[ 901.729717] iwl3945: I iwl3945_rx_handle r = 72, i = 71, REPLY_3945_RX, 0x1b
[ 901.751505] iwl3945: I iwl3945_rx_handle r = 73, i = 72, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.751521] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 9 [802.11bg] (TSF: 0x00000000:001B0C69) - 1 elapsed=122904 usec (124ms since last)
[ 901.752975] iwl3945: I iwl3945_rx_handle r = 75, i = 73, STATISTICS_NOTIFICATION, 0x9d
[ 901.752986] iwl3945: I iwl3945_rx_handle r = 75, i = 74, SCAN_START_NOTIFICATION, 0x82
[ 901.752990] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 10 [802.11bg] (TSF: 0x00000000:001B107C) - 1 (beacon timer 285282180)
[ 901.831927] iwl3945: I iwl3945_rx_handle r = 76, i = 75, REPLY_3945_RX, 0x1b
[ 901.875442] iwl3945: I iwl3945_rx_handle r = 77, i = 76, SCAN_RESULTS_NOTIFICATION, 0x83
[ 901.875453] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 10 [802.11bg] (TSF: 0x00000000:001CF088) - 1 elapsed=122892 usec (124ms since last)
[ 901.876794] iwl3945: I iwl3945_rx_handle r = 79, i = 77, STATISTICS_NOTIFICATION, 0x9d
[ 901.876801] iwl3945: I iwl3945_rx_handle r = 79, i = 78, SCAN_START_NOTIFICATION, 0x82
[ 901.876806] iwl3945: I iwl3945_rx_scan_start_notif Scan start: 11 [802.11bg] (TSF: 0x00000000:001CF44C) - 1 (beacon timer 302037940)
[ 901.934337] iwl3945: I iwl3945_rx_handle r = 80, i = 79, REPLY_3945_RX, 0x1b
[ 902.000327] iwl3945: I iwl3945_rx_handle r = 81, i = 80, SCAN_RESULTS_NOTIFICATION, 0x83
[ 902.000339] iwl3945: I iwl3945_rx_scan_results_notif Scan ch.res: 11 [802.11bg] (TSF: 0x00000000:001ED45D) - 1 elapsed=122897 usec (124ms since last)
[ 902.001726] iwl3945: I iwl3945_rx_handle r = 82, i = 81, SCAN_COMPLETE_NOTIFICATION, 0x84
[ 902.001733] iwl3945: I iwl3945_rx_scan_complete_notif Scan complete: 11 channels (TSF 0x001ED869:00000000) - 1
[ 902.001736] iwl3945: I iwl3945_rx_scan_complete_notif Scan pass on 2.4GHz took 1368ms
[ 902.001736] iwl3945: U iwl3945_bg_request_scan Kicking off one indirect scan.
[ 902.001736] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_SCAN_CMD (#80), seq: 0x4418, 262 bytes at 24[32]:4
[ 902.002911] iwl3945: I iwl3945_rx_handle r = 83, i = 82, REPLY_SCAN_CMD, 0x80
[ 902.203057] iwl3945: Microcode SW error detected. Restarting 0x82000008.
[ 902.203090] iwl3945: Start IWL Error Log Dump:
[ 902.203093] iwl3945: Status: 0x0002A2E4, count: 1
[ 902.203096] iwl3945: Desc Time asrtPC blink2 ilink1 nmiPC Line
[ 902.203167] iwl3945: SYSASSERT (#5) 0002221641 0x0089A 0x0025E 0x00304 0x0F0C6 75
[ 902.203169]
[ 902.203232] iwl3945: Start IWL Event Log Dump: display count 256, wraps 4
[ 902.203263] iwl3945: 0001657132 0x000000d9 0106
[ 902.203294] iwl3945: 0001657134 0x00000000 0301
[ 902.203325] iwl3945: 0001657144 0x00008000 0350
[ 902.203355] iwl3945: 0001657185 0x000000d9 0106
[ 902.203386] iwl3945: 0001657187 0x00000000 0301
[ 902.203416] iwl3945: 0001657197 0x00008000 0350
[ 902.203446] iwl3945: 0001678440 0x000000d9 0106
[ 902.203476] iwl3945: 0001678442 0x00000000 0302
[ 902.203507] iwl3945: 0001678450 0x00008000 0350
[ 902.203537] iwl3945: 0001678464 0x000000d9 0106
[ 902.203567] iwl3945: 0001678466 0x00000000 0302
[ 902.203597] iwl3945: 0001678488 0x00000001 0353
[ 902.203628] iwl3945: 0001749478 0x000000d9 0106
[ 902.203658] iwl3945: 0001749479 0x00000000 0301
[ 902.203688] iwl3945: 0001749859 0x00000000 0356
[ 902.203719] iwl3945: 0001750331 0x00000003 0310
[ 902.203749] iwl3945: 0001767002 0x000000d9 0106
[ 902.203779] iwl3945: 0001767003 0x00000000 0301
[ 902.203810] iwl3945: 0001767013 0x00008000 0350
[ 902.203840] iwl3945: 0001767039 0x000000d9 0106
[ 902.203871] iwl3945: 0001767041 0x00000000 0301
[ 902.203902] iwl3945: 0001767048 0x00008000 0350
[ 902.203931] iwl3945: 0001767060 0x000000d9 0106
[ 902.203931] iwl3945: 0001767062 0x00000000 0301
[ 902.203931] iwl3945: 0001767068 0x00008000 0350
[ 902.203931] iwl3945: 0001767081 0x000000d9 0106
[ 902.203931] iwl3945: 0001767083 0x00000000 0301
[ 902.203931] iwl3945: 0001767089 0x00008000 0350
[ 902.203931] iwl3945: 0001767102 0x000000d9 0106
[ 902.203931] iwl3945: 0001767104 0x00000000 0301
[ 902.203931] iwl3945: 0001767108 0x00008000 0350
[ 902.203931] iwl3945: 0001767116 0x000000d9 0106
[ 902.203931] iwl3945: 0001767118 0x00000000 0301
[ 902.203931] iwl3945: 0001767128 0x00008000 0350
[ 902.203931] iwl3945: 0001767139 0x000000d9 0106
[ 902.203931] iwl3945: 0001767140 0x00000000 0301
[ 902.203931] iwl3945: 0001767150 0x00008000 0350
[ 902.203931] iwl3945: 0001767167 0x000000d9 0106
[ 902.203931] iwl3945: 0001767169 0x00000000 0301
[ 902.203931] iwl3945: 0001767179 0x00008000 0350
[ 902.203931] iwl3945: 0001767190 0x000000d9 0106
[ 902.203931] iwl3945: 0001767192 0x00000000 0301
[ 902.203931] iwl3945: 0001767201 0x00008000 0350
[ 902.203931] iwl3945: 0001767212 0x000000d9 0106
[ 902.203931] iwl3945: 0001767213 0x00000000 0301
[ 902.203931] iwl3945: 0001767221 0x00008000 0350
[ 902.203931] iwl3945: 0001767234 0x000000d9 0106
[ 902.203931] iwl3945: 0001767236 0x00000000 0301
[ 902.203931] iwl3945: 0001767246 0x00008000 0350
[ 902.203931] iwl3945: 0001768354 0x000000d9 0106
[ 902.203931] iwl3945: 0001768356 0x00000000 0302
[ 902.203931] iwl3945: 0001768381 0x00000002 0353
[ 902.203931] iwl3945: 0001768513 0x000000d9 0106
[ 902.203931] iwl3945: 0001768515 0x00000000 0302
[ 902.203931] iwl3945: 0001768540 0x00000003 0353
[ 902.203931] iwl3945: 0001772648 0x0001e000 0723
[ 902.203931] iwl3945: 0001772649 0x00000009 0717
[ 902.203931] iwl3945: 0001772651 0x05050500 0706
[ 902.203931] iwl3945: 0001772655 0x05000300 0706
[ 902.203931] iwl3945: 0001772656 0x05050300 0725
[ 902.203931] iwl3945: 0001772657 0x00000000 0710
[ 902.203931] iwl3945: 0001772661 0x00000003 0732
[ 902.203931] iwl3945: 0001773349 0xffffff67 0454
[ 902.203931] iwl3945: 0001773350 0x00000000 0472
[ 902.203931] iwl3945: 0001773358 0x00000009 0463
[ 902.203931] iwl3945: 0001773362 0x0000000a 0719
[ 902.203931] iwl3945: 0001773363 0x03000304 0706
[ 902.203931] iwl3945: 0001773384 0x03000304 0725
[ 902.203931] iwl3945: 0001773385 0x00000004 0710
[ 902.203931] iwl3945: 0001773665 0x0000000a 0463
[ 902.203931] iwl3945: 0001773666 0x0000000a 0462
[ 902.203931] iwl3945: 0001773682 0x00000003 0733
[ 902.203931] iwl3945: 0001773692 0x0000000a 0716
[ 902.203931] iwl3945: 0001773694 0x03040400 0706
[ 902.203931] iwl3945: 0001773695 0x0000000a 0720
[ 902.203931] iwl3945: 0001773696 0x03040400 0725
[ 902.203931] iwl3945: 0001773697 0x00000000 0711
[ 902.203931] iwl3945: 0001773701 0x04000500 0706
[ 902.203931] iwl3945: 0001773715 0x04000500 0725
[ 902.203931] iwl3945: 0001773719 0x05000505 0706
[ 902.203931] iwl3945: 0001773735 0x05000505 0725
[ 902.203931] iwl3945: 0001786965 0x000000d9 0106
[ 902.203931] iwl3945: 0001786967 0x00000000 0301
[ 902.203931] iwl3945: 0001786977 0x00008000 0350
[ 902.203931] iwl3945: 0001787145 0x000000d9 0106
[ 902.203931] iwl3945: 0001787147 0x00000000 0301
[ 902.203931] iwl3945: 0001787156 0x00008000 0350
[ 902.203931] iwl3945: 0001851875 0x000000d9 0106
[ 902.203931] iwl3945: 0001851876 0x00000000 0301
[ 902.203931] iwl3945: 0001852259 0x00000000 0356
[ 902.203931] iwl3945: 0001852731 0x00000003 0310
[ 902.203931] iwl3945: 0001866960 0x000000d9 0106
[ 902.203931] iwl3945: 0001866961 0x00000000 0302
[ 902.203931] iwl3945: 0001866966 0x00008000 0350
[ 902.203931] iwl3945: 0001867009 0x000000d9 0106
[ 902.203931] iwl3945: 0001867011 0x00000000 0301
[ 902.203931] iwl3945: 0001867021 0x00008000 0350
[ 902.203931] iwl3945: 0001867082 0x000000d9 0106
[ 902.203931] iwl3945: 0001867083 0x00000000 0301
[ 902.203931] iwl3945: 0001867089 0x00008000 0350
[ 902.203931] iwl3945: 0001867105 0x000000d9 0106
[ 902.203931] iwl3945: 0001867107 0x00000000 0301
[ 902.203931] iwl3945: 0001867117 0x00008000 0350
[ 902.203931] iwl3945: 0001867224 0x000000d9 0106
[ 902.203931] iwl3945: 0001867225 0x00000000 0301
[ 902.203931] iwl3945: 0001867232 0x00008000 0350
[ 902.203931] iwl3945: 0001896583 0x0001e000 0723
[ 902.203931] iwl3945: 0001896584 0x0000000a 0717
[ 902.203931] iwl3945: 0001896586 0x05050500 0706
[ 902.203931] iwl3945: 0001896590 0x05000300 0706
[ 902.203931] iwl3945: 0001896591 0x05050300 0725
[ 902.203931] iwl3945: 0001896592 0x00000000 0710
[ 902.203931] iwl3945: 0001896596 0x00000003 0732
[ 902.203931] iwl3945: 0001897284 0xffffff67 0454
[ 902.203931] iwl3945: 0001897285 0x00000000 0472
[ 902.203931] iwl3945: 0001897293 0x0000000a 0463
[ 902.203931] iwl3945: 0001897297 0x0000000b 0719
[ 902.203931] iwl3945: 0001897298 0x03000304 0706
[ 902.203931] iwl3945: 0001897319 0x03000304 0725
[ 902.203931] iwl3945: 0001897320 0x00000004 0710
[ 902.203931] iwl3945: 0001897520 0x0000000b 0463
[ 902.203931] iwl3945: 0001897522 0x0000000b 0462
[ 902.203931] iwl3945: 0001897538 0x00000003 0733
[ 902.203931] iwl3945: 0001897547 0x0000000b 0716
[ 902.203931] iwl3945: 0001897550 0x03040400 0706
[ 902.203931] iwl3945: 0001897551 0x0000000b 0720
[ 902.203931] iwl3945: 0001897552 0x03040400 0725
[ 902.203931] iwl3945: 0001897553 0x00000000 0711
[ 902.203931] iwl3945: 0001897557 0x04000500 0706
[ 902.203931] iwl3945: 0001897570 0x04000500 0725
[ 902.203931] iwl3945: 0001897574 0x05000505 0706
[ 902.203931] iwl3945: 0001897590 0x05000505 0725
[ 902.203931] iwl3945: 0001926986 0x000000d9 0106
[ 902.203931] iwl3945: 0001926987 0x00000000 0301
[ 902.203931] iwl3945: 0001926997 0x00008000 0350
[ 902.203931] iwl3945: 0001927025 0x000000d9 0106
[ 902.203931] iwl3945: 0001927027 0x00000000 0301
[ 902.203931] iwl3945: 0001927036 0x00008000 0350
[ 902.203931] iwl3945: 0001927057 0x000000d9 0106
[ 902.203931] iwl3945: 0001927059 0x00000000 0301
[ 902.203931] iwl3945: 0001927064 0x00008000 0350
[ 902.203931] iwl3945: 0001927106 0x000000d9 0106
[ 902.203931] iwl3945: 0001927108 0x00000000 0301
[ 902.203931] iwl3945: 0001927118 0x00008000 0350
[ 902.203931] iwl3945: 0001927129 0x000000d9 0106
[ 902.203931] iwl3945: 0001927131 0x00000000 0301
[ 902.203931] iwl3945: 0001927141 0x00008000 0350
[ 902.203931] iwl3945: 0001927164 0x000000d9 0106
[ 902.203931] iwl3945: 0001927166 0x00000000 0301
[ 902.203931] iwl3945: 0001927175 0x00008000 0350
[ 902.203931] iwl3945: 0001927208 0x000000d9 0106
[ 902.203931] iwl3945: 0001927210 0x00000000 0301
[ 902.203931] iwl3945: 0001927283 0x00000001 0353
[ 902.203931] iwl3945: 0001927292 0x00000000 0352
[ 902.203931] iwl3945: 0001935148 0x000000d9 0106
[ 902.203931] iwl3945: 0001935149 0x00000000 0301
[ 902.203931] iwl3945: 0001935217 0x00000002 0353
[ 902.203931] iwl3945: 0001935226 0x00000000 0352
[ 902.203931] iwl3945: 0001935321 0x000000d9 0106
[ 902.203931] iwl3945: 0001935323 0x00000000 0301
[ 902.203931] iwl3945: 0001935397 0x00000003 0353
[ 902.203931] iwl3945: 0001935405 0x00000000 0352
[ 902.203931] iwl3945: 0001935631 0x000000d9 0106
[ 902.203931] iwl3945: 0001935632 0x00000000 0301
[ 902.203931] iwl3945: 0001935706 0x00000004 0353
[ 902.203931] iwl3945: 0001935715 0x00000000 0352
[ 902.203931] iwl3945: 0001946997 0x000000d9 0106
[ 902.203931] iwl3945: 0001946999 0x00000000 0301
[ 902.203931] iwl3945: 0001947008 0x00008000 0350
[ 902.203931] iwl3945: 0001947031 0x000000d9 0106
[ 902.203931] iwl3945: 0001947032 0x00000000 0301
[ 902.203931] iwl3945: 0001947042 0x00008000 0350
[ 902.203931] iwl3945: 0001947072 0x000000d9 0106
[ 902.203931] iwl3945: 0001947073 0x00000000 0301
[ 902.203931] iwl3945: 0001947080 0x00008000 0350
[ 902.203931] iwl3945: 0001947097 0x000000d9 0106
[ 902.203931] iwl3945: 0001947099 0x00000000 0301
[ 902.203931] iwl3945: 0001947108 0x00008000 0350
[ 902.203931] iwl3945: 0001947132 0x000000d9 0106
[ 902.203931] iwl3945: 0001947134 0x00000000 0301
[ 902.203931] iwl3945: 0001947141 0x00008000 0350
[ 902.203931] iwl3945: 0001947166 0x000000d9 0106
[ 902.203931] iwl3945: 0001947167 0x00000000 0301
[ 902.203931] iwl3945: 0001947177 0x00008000 0350
[ 902.203931] iwl3945: 0001947194 0x000000d9 0106
[ 902.203931] iwl3945: 0001947196 0x00000000 0301
[ 902.203931] iwl3945: 0001947206 0x00008000 0350
[ 902.203931] iwl3945: 0001947217 0x000000d9 0106
[ 902.203931] iwl3945: 0001947218 0x00000000 0301
[ 902.203931] iwl3945: 0001947228 0x00008000 0350
[ 902.203931] iwl3945: 0001947245 0x000000d9 0106
[ 902.203931] iwl3945: 0001947246 0x00000000 0302
[ 902.203931] iwl3945: 0001947286 0x00000001 0353
[ 902.203931] iwl3945: 0001954276 0x000000d9 0106
[ 902.203931] iwl3945: 0001954277 0x00000000 0301
[ 902.203931] iwl3945: 0001954658 0x00000000 0356
[ 902.203931] iwl3945: 0001955130 0x00000003 0310
[ 902.203931] iwl3945: 0001987040 0x000000d9 0106
[ 902.203931] iwl3945: 0001987041 0x00000000 0301
[ 902.203931] iwl3945: 0001987050 0x00008000 0350
[ 902.203931] iwl3945: 0001987072 0x000000d9 0106
[ 902.203931] iwl3945: 0001987074 0x00000000 0301
[ 902.203931] iwl3945: 0001987084 0x00008000 0350
[ 902.203931] iwl3945: 0001987148 0x000000d9 0106
[ 902.203931] iwl3945: 0001987149 0x00000000 0301
[ 902.203931] iwl3945: 0001987159 0x00008000 0350
[ 902.203931] iwl3945: 0002016969 0x000000d9 0106
[ 902.203931] iwl3945: 0002016971 0x00000000 0302
[ 902.203931] iwl3945: 0002017014 0x00000002 0353
[ 902.203931] iwl3945: 0002017184 0x000000d9 0106
[ 902.203931] iwl3945: 0002017185 0x00000000 0301
[ 902.203931] iwl3945: 0002017191 0x00008000 0350
[ 902.203931] iwl3945: 0002017225 0x000000d9 0106
[ 902.203931] iwl3945: 0002017226 0x00000000 0301
[ 902.203931] iwl3945: 0002017234 0x00008000 0350
[ 902.203931] iwl3945: 0002020444 0x0001e000 0723
[ 902.203931] iwl3945: 0002020445 0x0000000b 0717
[ 902.203931] iwl3945: 0002020447 0x05050500 0706
[ 902.203931] iwl3945: 0002020448 0x05000600 0706
[ 902.203931] iwl3945: 0002020449 0x05050600 0725
[ 902.203931] iwl3945: 0002020450 0x00000000 0713
[ 902.203931] iwl3945: 0002020451 0x00000006 0732
[ 902.203931] iwl3945: 0002021088 0xffffff68 0454
[ 902.203931] iwl3945: 0002021089 0x00000000 0472
[ 902.203931] iwl3945: 0002021097 0x0000000b 0463
[ 902.203931] iwl3945: 0002021102 0x00000001 0719
[ 902.203931] iwl3945: 0002021155 0x06000604 0706
[ 902.203931] iwl3945: 0002021160 0x06000604 0725
[ 902.203931] iwl3945: 0002021161 0x00000004 0713
[ 902.203931] iwl3945: 0002021445 0x00000001 0463
[ 902.203931] iwl3945: 0002021447 0x00000001 0462
[ 902.203931] iwl3945: 0002021470 0x00000006 0733
[ 902.203931] iwl3945: 0002021471 0x00000001 0720
[ 902.203931] iwl3945: 0002021472 0x06040600 0706
[ 902.203931] iwl3945: 0002021477 0x06000100 0706
[ 902.203931] iwl3945: 0002021479 0x06040100 0725
[ 902.203931] iwl3945: 0002021480 0x00000000 0708
[ 902.203931] iwl3945: 0002021481 0x00000001 0718
[ 902.203931] iwl3945: 0002021486 0x01000000 0706
[ 902.203931] iwl3945: 0002021487 0x00000000 0706
[ 902.203931] iwl3945: 0002021488 0x44170080 0703
[ 902.203931] iwl3945: 0002021598 0x44180080 0401
[ 902.203931] iwl3945: 0002021600 0x44180080 0700
[ 902.203931] iwl3945: 0002021603 0x00000000 0706
[ 902.203931] iwl3945: 0002021611 0x00000000 0452
[ 902.203931] iwl3945: 0002021612 0x00000000 0452
[ 902.203931] iwl3945: 0002021615 0x00000072 0601
[ 902.203931] iwl3945: 0002021622 0x00000100 0706
[ 902.203931] iwl3945: 0002021626 0x00000000 0708
[ 902.203931] iwl3945: 0002021631 0x01000300 0706
[ 902.203931] iwl3945: 0002021640 0x01000300 0725
[ 902.203931] iwl3945: 0002021641 0x00000000 0710
[ 902.203931] iwl3945: 0002021645 0x00000001 0729
[ 902.203931] iwl3945: 0002021646 0x00000003 0732
[ 902.203931] iwl3945: 0002221639 0x00000002 0123
[ 902.203931] iwl3945: 0002221642 0x00000100 0125
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd RX CONFIG:
[ 902.203931] iwl data: 00000000: 00 1b 77 f1 7c 29 00 00 00 00 00 00 00 00 00 00 ..w.|)..........
[ 902.203931] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 00 00 15 03 00 00 ................
[ 902.203931] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 00 00 ............
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u16 channel: 0x1
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u32 flags: 0x00008005
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u32 filter_flags: 0x00000004
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u8 dev_type: 0x3
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u8 cck_basic_rates: 0x03
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u8[6] node_addr: 00:1b:77:f1:7c:29
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
[ 902.203931] iwl3945: I iwl3945_print_rx_config_cmd u16 assoc_id: 0x0
[ 902.203931] iwl3945: I iwl3945_irq_handle_error Restarting adapter due to uCode error.
[ 902.203931] iwl3945: I iwl3945_rx_handle r = 84, i = 83, REPLY_ERROR, 0x02
[ 902.203931] iwl3945: Error Reply type 0x00000005 cmd REPLY_SCAN_CMD (0x80) seq 0x4418 ser 0x0000004B
[ 902.213689] iwl3945: U __iwl3945_down iwl3945 is going down
[ 902.830450] iwl3945: Can't stop Rx DMA.
[ 903.839393] iwl3945: U iwl3945_hw_nic_stop_master stop master
[ 903.964804] iwl3945: U iwl3945_clear_free_frames 0 frames on pre-allocated heap on clear.
[ 903.964824] iwl3945: U iwl3945_power_init_handle Initialize power
[ 903.964834] iwl3945: U iwl3945_power_init_handle adjust power command flags
[ 903.964930] iwl3945: U iwl3945_hw_nic_init HW Revision ID = 0x2
[ 903.964976] iwl3945: U iwl3945_hw_nic_init 3945 RADIO-MM type
[ 903.964984] iwl3945: U iwl3945_hw_nic_init SKU OP mode is basic
[ 903.964987] iwl3945: U iwl3945_hw_nic_init 3945ABG revision is 0xF1
[ 903.964995] iwl3945: U iwl3945_hw_nic_init Card M type B version is 0x2
[ 903.965881] iwl3945: U iwl3945_load_bsm Begin load bsm
[ 903.967136] iwl3945: U iwl3945_verify_bsm Begin verify bsm
[ 903.968755] iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK
[ 903.968755] iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations
[ 903.968755] iwl3945: U __iwl3945_up iwl3945 is coming up
[ 903.826522] iwl3945: I iwl3945_rx_handle r = 1, i = 0, REPLY_ALIVE, 0x01
[ 903.826522] iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
[ 903.826522] iwl3945: I iwl3945_rx_reply_alive Initialization Alive received.
[ 903.988268] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
[ 903.988268] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
[ 903.988268] iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM
[ 903.988268] iwl3945: U iwl3945_init_alive_start Initialization Alive received.
[ 903.988268] iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.
[ 903.993418] iwl3945: I iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01
[ 903.993418] iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
[ 903.993418] iwl3945: I iwl3945_rx_reply_alive Runtime Alive received.
[ 903.993418] iwl3945: I iwl3945_disable_events Selected uCode log events may be disabled
[ 903.993418] iwl3945: I iwl3945_disable_events by writing "1"s into disable bitmap
[ 903.993418] iwl3945: I iwl3945_disable_events in SRAM at 0x8015f4, size 47 u32s
[ 904.000733] iwl3945: U iwl3945_alive_start Runtime Alive received.
[ 904.000733] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
[ 904.000733] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
[ 904.000733] iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524
[ 904.000733] iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM
[ 904.000733] iwl3945: U iwl3945_alive_start RFKILL status: 0x1
[ 904.000733] iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008
[ 904.000733] iwl3945: U iwl3945_update_power_cmd Tx timeout = 0
[ 904.000733] iwl3945: U iwl3945_update_power_cmd Rx timeout = 0
[ 904.000733] iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4
[ 904.012759] iwl3945: I iwl3945_rx_handle r 3 i 2 No handler needed for POWER_TABLE_CMD, 0x77
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4
[ 904.000733] iwl3945: I iwl3945_rx_handle r 4 i 3 No handler needed for REPLY_BT_CONFIG, 0x9b
[ 904.000733] iwl3945: U iwl3945_commit_rxon Sending RXON
[ 904.000733] * without RXON_FILTER_ASSOC_MSK
[ 904.000733] * channel = 1
[ 904.000733] * bssid = 00:00:00:00:00:00
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4
[ 904.016735] iwl3945: I iwl3945_rx_handle r 5 i 4 No handler needed for REPLY_RXON, 0x10
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 115 rate code 0x03
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0403, 56 bytes at 3[3]:4
[ 904.000733] iwl3945: I iwl3945_rx_handle r 6 i 5 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 904.000733] iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0404, 68 bytes at 4[4]:4
[ 904.020735] iwl3945: I iwl3945_rx_handle r = 7, i = 6, REPLY_ADD_STA, 0x18
[ 904.000733] iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0405, 56 bytes at 5[5]:4
[ 904.000733] iwl3945: I iwl3945_rx_handle r 8 i 7 No handler needed for REPLY_RATE_SCALE, 0x47
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0406, 56 bytes at 6[6]:4
[ 904.030303] iwl3945: I iwl3945_rx_handle r 9 i 8 No handler needed for REPLY_RATE_SCALE, 0x47
[ 904.000733] iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 103
[ 904.000733] iwl3945: U is_temp_calib_needed Getting warmer, delta 11,
[ 904.000733] iwl3945: U is_temp_calib_needed Timed thermal calib needed
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x0d
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x0f
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x05
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x07
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x09
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x0b
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 115 dsp 107 rate code 0x01
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x03
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 92 rate code 0x0a
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 92 rate code 0x14
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 92 rate code 0x37
[ 904.000733] iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 92 rate code 0x6e
[ 904.000733] iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0407, 56 bytes at 7[7]:4
[ 904.000733] iwl3945: I iwl3945_rx_handle r 10 i 9 No handler needed for REPLY_TX_PWR_TABLE_CMD, 0x97
[ 904.000733] iwl3945: U iwl3945_alive_start ALIVE processing complete.
[ 904.000733] iwl3945: I iwl3945_rx_handle r = 11, i = 10, REPLY_3945_RX, 0x1b
[ 904.196012] iwl3945: I iwl3945_rx_handle r = 12, i = 11, REPLY_3945_RX, 0x1b
[ 904.000733] iwl3945: I iwl3945_rx_handle r = 13, i = 12, REPLY_3945_RX, 0x1b
[ 904.000733] iwl3945: I iwl3945_rx_handle r = 14, i = 13, REPLY_3945_RX, 0x1b
[ 904.505066] iwl3945: I iwl3945_rx_handle r = 15, i = 14, REPLY_3945_RX, 0x1b
[ 904.609065] iwl3945: I iwl3945_rx_handle r = 16, i = 15, REPLY_3945_RX, 0x1b
[ 904.711355] iwl3945: I iwl3945_rx_handle r = 17, i = 16, REPLY_3945_RX, 0x1b
[ 904.815206] iwl3945: I iwl3945_rx_handle r = 18, i = 17, REPLY_3945_RX, 0x1b
[ 904.920368] iwl3945: I iwl3945_rx_handle r = 19, i = 18, REPLY_3945_RX, 0x1b
[ 905.023113] iwl3945: I iwl3945_rx_handle r = 20, i = 19, REPLY_3945_RX, 0x1b
[ 905.126662] iwl3945: I iwl3945_rx_handle r = 21, i = 20, REPLY_3945_RX, 0x1b
[ 905.227222] iwl3945: I iwl3945_rx_handle r = 22, i = 21, REPLY_3945_RX, 0x1b
[ 905.331355] iwl3945: I iwl3945_rx_handle r = 23, i = 22, REPLY_3945_RX, 0x1b
[ 905.434947] iwl3945: I iwl3945_rx_handle r = 24, i = 23, REPLY_3945_RX, 0x1b
[ 905.539972] iwl3945: I iwl3945_rx_handle r = 25, i = 24, REPLY_3945_RX, 0x1b
[ 905.642494] iwl3945: I iwl3945_rx_handle r = 26, i = 25, REPLY_3945_RX, 0x1b
[ 905.744482] iwl3945: I iwl3945_rx_handle r = 27, i = 26, REPLY_3945_RX, 0x1b
[ 905.849903] iwl3945: I iwl3945_rx_handle r = 28, i = 27, REPLY_3945_RX, 0x1b
[ 905.952192] iwl3945: I iwl3945_rx_handle r = 29, i = 28, REPLY_3945_RX, 0x1b
[ 906.054561] iwl3945: I iwl3945_rx_handle r = 30, i = 29, REPLY_3945_RX, 0x1b
[ 906.157937] iwl3945: I iwl3945_rx_handle r = 31, i = 30, REPLY_3945_RX, 0x1b
[ 906.261683] iwl3945: I iwl3945_rx_handle r = 32, i = 31, REPLY_3945_RX, 0x1b
[ 906.370057] iwl3945: I iwl3945_rx_handle r = 33, i = 32, REPLY_3945_RX, 0x1b
[ 906.470651] iwl3945: I iwl3945_rx_handle r = 34, i = 33, REPLY_3945_RX, 0x1b
[ 906.575539] iwl3945: I iwl3945_rx_handle r = 35, i = 34, REPLY_3945_RX, 0x1b
[ 906.676958] iwl3945: I iwl3945_rx_handle r = 36, i = 35, REPLY_3945_RX, 0x1b
[ 906.781907] iwl3945: I iwl3945_rx_handle r = 37, i = 36, REPLY_3945_RX, 0x1b
[ 906.884714] iwl3945: I iwl3945_rx_handle r = 38, i = 37, REPLY_3945_RX, 0x1b
[ 906.988825] iwl3945: I iwl3945_rx_handle r = 39, i = 38, REPLY_3945_RX, 0x1b
[ 907.095015] iwl3945: I iwl3945_rx_handle r = 40, i = 39, REPLY_3945_RX, 0x1b
[ 907.199731] iwl3945: I iwl3945_rx_handle r = 41, i = 40, REPLY_3945_RX, 0x1b
[ 907.300281] iwl3945: I iwl3945_rx_handle r = 42, i = 41, REPLY_3945_RX, 0x1b
[ 907.404449] iwl3945: I iwl3945_rx_handle r = 43, i = 42, REPLY_3945_RX, 0x1b
[ 907.510529] iwl3945: I iwl3945_rx_handle r = 44, i = 43, REPLY_3945_RX, 0x1b
[ 907.613230] iwl3945: I iwl3945_rx_handle r = 45, i = 44, REPLY_3945_RX, 0x1b
[ 907.717176] iwl3945: I iwl3945_rx_handle r = 46, i = 45, REPLY_3945_RX, 0x1b
[ 907.822254] iwl3945: I iwl3945_rx_handle r = 47, i = 46, REPLY_3945_RX, 0x1b
[ 907.926898] iwl3945: I iwl3945_rx_handle r = 48, i = 47, REPLY_3945_RX, 0x1b
[ 908.029811] iwl3945: I iwl3945_rx_handle r = 49, i = 48, REPLY_3945_RX, 0x1b
[ 908.131948] iwl3945: I iwl3945_rx_handle r = 50, i = 49, REPLY_3945_RX, 0x1b
[ 908.234352] iwl3945: I iwl3945_rx_handle r = 51, i = 50, REPLY_3945_RX, 0x1b
[ 908.337689] iwl3945: I iwl3945_rx_handle r = 52, i = 51, REPLY_3945_RX, 0x1b
[ 908.443049] iwl3945: I iwl3945_rx_handle r = 53, i = 52, REPLY_3945_RX, 0x1b
[ 908.545376] iwl3945: I iwl3945_rx_handle r = 54, i = 53, REPLY_3945_RX, 0x1b
[ 908.648575] iwl3945: I iwl3945_rx_handle r = 55, i = 54, REPLY_3945_RX, 0x1b
[ 908.753390] iwl3945: I iwl3945_rx_handle r = 56, i = 55, REPLY_3945_RX, 0x1b
[ 908.856486] iwl3945: I iwl3945_rx_handle r = 57, i = 56, REPLY_3945_RX, 0x1b
[ 908.964186] iwl3945: I iwl3945_rx_handle r = 58, i = 57, REPLY_3945_RX, 0x1b
[ 909.069826] iwl3945: I iwl3945_rx_handle r = 59, i = 58, REPLY_3945_RX, 0x1b
[ 909.172541] iwl3945: I iwl3945_rx_handle r = 60, i = 59, REPLY_3945_RX, 0x1b
[ 909.275431] iwl3945: I iwl3945_rx_handle r = 61, i = 60, REPLY_3945_RX, 0x1b
[ 909.376238] iwl3945: I iwl3945_rx_handle r = 62, i = 61, REPLY_3945_RX, 0x1b
[ 909.479541] iwl3945: I iwl3945_rx_handle r = 63, i = 62, REPLY_3945_RX, 0x1b
[ 909.582517] iwl3945: I iwl3945_rx_handle r = 64, i = 63, REPLY_3945_RX, 0x1b
[ 909.687793] iwl3945: I iwl3945_rx_handle r = 65, i = 64, REPLY_3945_RX, 0x1b
[ 909.790581] iwl3945: I iwl3945_rx_handle r = 66, i = 65, REPLY_3945_RX, 0x1b
[ 909.895329] iwl3945: I iwl3945_rx_handle r = 67, i = 66, REPLY_3945_RX, 0x1b
[ 909.999498] iwl3945: I iwl3945_rx_handle r = 68, i = 67, REPLY_3945_RX, 0x1b
[ 910.101545] iwl3945: I iwl3945_rx_handle r = 69, i = 68, REPLY_3945_RX, 0x1b
[ 910.206335] iwl3945: I iwl3945_rx_handle r = 70, i = 69, REPLY_3945_RX, 0x1b
[ 910.307497] iwl3945: I iwl3945_rx_handle r = 71, i = 70, REPLY_3945_RX, 0x1b
[ 910.410841] iwl3945: I iwl3945_rx_handle r = 72, i = 71, REPLY_3945_RX, 0x1b
[ 910.513672] iwl3945: I iwl3945_rx_handle r = 73, i = 72, REPLY_3945_RX, 0x1b
[ 910.615989] iwl3945: I iwl3945_rx_handle r = 74, i = 73, REPLY_3945_RX, 0x1b
[ 910.718323] iwl3945: I iwl3945_rx_handle r = 75, i = 74, REPLY_3945_RX, 0x1b
[ 910.824562] iwl3945: I iwl3945_rx_handle r = 76, i = 75, REPLY_3945_RX, 0x1b
[ 910.923815] iwl3945: I iwl3945_rx_handle r = 77, i = 76, REPLY_3945_RX, 0x1b
[ 911.033872] iwl3945: I iwl3945_rx_handle r = 78, i = 77, REPLY_3945_RX, 0x1b
[ 911.137937] iwl3945: I iwl3945_rx_handle r = 79, i = 78, REPLY_3945_RX, 0x1b
[ 911.238903] iwl3945: I iwl3945_rx_handle r = 80, i = 79, REPLY_3945_RX, 0x1b
[ 911.344156] iwl3945: I iwl3945_rx_handle r = 81, i = 80, REPLY_3945_RX, 0x1b
[ 911.450076] iwl3945: I iwl3945_rx_handle r = 82, i = 81, REPLY_3945_RX, 0x1b
[ 911.551590] iwl3945: I iwl3945_rx_handle r = 83, i = 82, REPLY_3945_RX, 0x1b
[ 911.654853] iwl3945: I iwl3945_rx_handle r = 84, i = 83, REPLY_3945_RX, 0x1b
[ 911.758134] iwl3945: I iwl3945_rx_handle r = 85, i = 84, REPLY_3945_RX, 0x1b
[ 911.863013] iwl3945: I iwl3945_rx_handle r = 86, i = 85, REPLY_3945_RX, 0x1b
[ 911.967679] iwl3945: I iwl3945_rx_handle r = 87, i = 86, REPLY_3945_RX, 0x1b
[ 912.072223] iwl3945: I iwl3945_rx_handle r = 88, i = 87, REPLY_3945_RX, 0x1b
[ 912.175516] iwl3945: I iwl3945_rx_handle r = 89, i = 88, REPLY_3945_RX, 0x1b
[ 912.277575] iwl3945: I iwl3945_rx_handle r = 90, i = 89, REPLY_3945_RX, 0x1b
[ 912.383813] iwl3945: I iwl3945_rx_handle r = 91, i = 90, REPLY_3945_RX, 0x1b
[ 912.487476] iwl3945: I iwl3945_rx_handle r = 92, i = 91, REPLY_3945_RX, 0x1b
[ 912.590888] iwl3945: I iwl3945_rx_handle r = 93, i = 92, REPLY_3945_RX, 0x1b
[ 912.695053] iwl3945: I iwl3945_rx_handle r = 94, i = 93, REPLY_3945_RX, 0x1b
[ 912.796621] iwl3945: I iwl3945_rx_handle r = 95, i = 94, REPLY_3945_RX, 0x1b
[ 912.903619] iwl3945: I iwl3945_rx_handle r = 96, i = 95, REPLY_3945_RX, 0x1b
[ 913.003080] iwl3945: I iwl3945_rx_handle r = 97, i = 96, REPLY_3945_RX, 0x1b
[ 913.107853] iwl3945: I iwl3945_rx_handle r = 98, i = 97, REPLY_3945_RX, 0x1b
[ 913.211077] iwl3945: I iwl3945_rx_handle r = 99, i = 98, REPLY_3945_RX, 0x1b
[ 913.312755] iwl3945: I iwl3945_rx_handle r = 100, i = 99, REPLY_3945_RX, 0x1b
[ 913.416518] iwl3945: I iwl3945_rx_handle r = 101, i = 100, REPLY_3945_RX, 0x1b
[ 913.523089] iwl3945: I iwl3945_rx_handle r = 102, i = 101, REPLY_3945_RX, 0x1b
[ 913.623984] iwl3945: I iwl3945_rx_handle r = 103, i = 102, REPLY_3945_RX, 0x1b
[ 913.730164] iwl3945: I iwl3945_rx_handle r = 104, i = 103, REPLY_3945_RX, 0x1b
[ 913.836261] iwl3945: I iwl3945_rx_handle r = 105, i = 104, REPLY_3945_RX, 0x1b
[ 913.944525] iwl3945: I iwl3945_rx_handle r = 106, i = 105, REPLY_3945_RX, 0x1b
[ 914.047370] iwl3945: I iwl3945_rx_handle r = 107, i = 106, REPLY_3945_RX, 0x1b
[ 914.150645] iwl3945: I iwl3945_rx_handle r = 108, i = 107, REPLY_3945_RX, 0x1b
[ 914.254441] iwl3945: I iwl3945_rx_handle r = 109, i = 108, REPLY_3945_RX, 0x1b
[ 914.363621] iwl3945: I iwl3945_rx_handle r = 110, i = 109, REPLY_3945_RX, 0x1b
[ 914.467996] iwl3945: I iwl3945_rx_handle r = 111, i = 110, REPLY_3945_RX, 0x1b
[ 914.571995] iwl3945: I iwl3945_rx_handle r = 112, i = 111, REPLY_3945_RX, 0x1b
[ 914.676813] iwl3945: I iwl3945_rx_handle r = 113, i = 112, REPLY_3945_RX, 0x1b
[ 914.779387] iwl3945: I iwl3945_rx_handle r = 114, i = 113, REPLY_3945_RX, 0x1b
[ 914.881138] iwl3945: I iwl3945_rx_handle r = 115, i = 114, REPLY_3945_RX, 0x1b
[ 914.984393] iwl3945: I iwl3945_rx_handle r = 116, i = 115, REPLY_3945_RX, 0x1b
[ 915.086927] iwl3945: I iwl3945_rx_handle r = 117, i = 116, REPLY_3945_RX, 0x1b
[ 915.191157] iwl3945: I iwl3945_rx_handle r = 118, i = 117, REPLY_3945_RX, 0x1b
[ 915.294049] iwl3945: I iwl3945_rx_handle r = 119, i = 118, REPLY_3945_RX, 0x1b
[ 915.400184] iwl3945: I iwl3945_rx_handle r = 120, i = 119, REPLY_3945_RX, 0x1b
[ 915.500738] iwl3945: I iwl3945_rx_handle r = 121, i = 120, REPLY_3945_RX, 0x1b
[ 915.602275] iwl3945: I iwl3945_rx_handle r = 122, i = 121, REPLY_3945_RX, 0x1b
[ 915.705612] iwl3945: I iwl3945_rx_handle r = 123, i = 122, REPLY_3945_RX, 0x1b
[ 915.807086] iwl3945: I iwl3945_rx_handle r = 124, i = 123, REPLY_3945_RX, 0x1b
[ 915.910337] iwl3945: I iwl3945_rx_handle r = 125, i = 124, REPLY_3945_RX, 0x1b
[ 916.012725] iwl3945: I iwl3945_rx_handle r = 126, i = 125, REPLY_3945_RX, 0x1b
[ 916.115140] iwl3945: I iwl3945_rx_handle r = 127, i = 126, REPLY_3945_RX, 0x1b
[ 916.221353] iwl3945: I iwl3945_rx_handle r = 128, i = 127, REPLY_3945_RX, 0x1b
[ 916.328488] iwl3945: I iwl3945_rx_handle r = 129, i = 128, REPLY_3945_RX, 0x1b
[ 916.432657] iwl3945: I iwl3945_rx_handle r = 130, i = 129, REPLY_3945_RX, 0x1b
[ 916.536670] iwl3945: I iwl3945_rx_handle r = 131, i = 130, REPLY_3945_RX, 0x1b
[ 916.639058] iwl3945: I iwl3945_rx_handle r = 132, i = 131, REPLY_3945_RX, 0x1b
[ 916.744643] iwl3945: I iwl3945_rx_handle r = 133, i = 132, REPLY_3945_RX, 0x1b
[ 916.848746] iwl3945: I iwl3945_rx_handle r = 134, i = 133, REPLY_3945_RX, 0x1b
[ 916.951552] iwl3945: I iwl3945_rx_handle r = 135, i = 134, REPLY_3945_RX, 0x1b
[ 917.055915] iwl3945: I iwl3945_rx_handle r = 136, i = 135, REPLY_3945_RX, 0x1b
[ 917.159119] iwl3945: I iwl3945_rx_handle r = 137, i = 136, REPLY_3945_RX, 0x1b
[ 917.264287] iwl3945: I iwl3945_rx_handle r = 138, i = 137, REPLY_3945_RX, 0x1b
[ 917.366670] iwl3945: I iwl3945_rx_handle r = 139, i = 138, REPLY_3945_RX, 0x1b
[ 917.470456] iwl3945: I iwl3945_rx_handle r = 140, i = 139, REPLY_3945_RX, 0x1b
[ 917.562126] APIC error on CPU0: 40(40)
[ 917.578719] iwl3945: I iwl3945_rx_handle r = 141, i = 140, REPLY_3945_RX, 0x1b
[ 917.677882] iwl3945: I iwl3945_rx_handle r = 142, i = 141, REPLY_3945_RX, 0x1b
[ 917.782914] iwl3945: I iwl3945_rx_handle r = 143, i = 142, REPLY_3945_RX, 0x1b
[ 917.805236] APIC error on CPU0: 40(40)
[ 917.886867] iwl3945: I iwl3945_rx_handle r = 144, i = 143, REPLY_3945_RX, 0x1b
[ 917.990335] iwl3945: I iwl3945_rx_handle r = 145, i = 144, REPLY_3945_RX, 0x1b
[ 918.093254] iwl3945: I iwl3945_rx_handle r = 146, i = 145, REPLY_3945_RX, 0x1b
[ 918.200135] iwl3945: I iwl3945_rx_handle r = 147, i = 146, REPLY_3945_RX, 0x1b
[ 918.303558] iwl3945: I iwl3945_rx_handle r = 148, i = 147, REPLY_3945_RX, 0x1b
[ 918.407554] iwl3945: I iwl3945_rx_handle r = 149, i = 148, REPLY_3945_RX, 0x1b
[ 918.510327] iwl3945: I iwl3945_rx_handle r = 150, i = 149, REPLY_3945_RX, 0x1b
[ 918.612698] iwl3945: I iwl3945_rx_handle r = 151, i = 150, REPLY_3945_RX, 0x1b
[ 918.717753] iwl3945: I iwl3945_rx_handle r = 152, i = 151, REPLY_3945_RX, 0x1b
[ 918.821177] iwl3945: I iwl3945_rx_handle r = 153, i = 152, REPLY_3945_RX, 0x1b
[ 918.923409] iwl3945: I iwl3945_rx_handle r = 154, i = 153, REPLY_3945_RX, 0x1b
[ 919.025810] iwl3945: I iwl3945_rx_handle r = 155, i = 154, REPLY_3945_RX, 0x1b
[ 919.129229] iwl3945: I iwl3945_rx_handle r = 156, i = 155, REPLY_3945_RX, 0x1b
[ 919.235161] iwl3945: I iwl3945_rx_handle r = 157, i = 156, REPLY_3945_RX, 0x1b
[ 919.338217] iwl3945: I iwl3945_rx_handle r = 158, i = 157, REPLY_3945_RX, 0x1b
[ 919.440422] iwl3945: I iwl3945_rx_handle r = 159, i = 158, REPLY_3945_RX, 0x1b
[ 919.543128] iwl3945: I iwl3945_rx_handle r = 160, i = 159, REPLY_3945_RX, 0x1b
[ 919.646116] iwl3945: I iwl3945_rx_handle r = 161, i = 160, REPLY_3945_RX, 0x1b
[ 919.748515] iwl3945: I iwl3945_rx_handle r = 162, i = 161, REPLY_3945_RX, 0x1b
[ 919.852301] iwl3945: I iwl3945_rx_handle r = 163, i = 162, REPLY_3945_RX, 0x1b
[ 919.955427] iwl3945: I iwl3945_rx_handle r = 164, i = 163, REPLY_3945_RX, 0x1b
[ 920.061572] iwl3945: I iwl3945_rx_handle r = 165, i = 164, REPLY_3945_RX, 0x1b
[ 920.168426] iwl3945: I iwl3945_rx_handle r = 166, i = 165, REPLY_3945_RX, 0x1b
[ 920.270509] iwl3945: I iwl3945_rx_handle r = 167, i = 166, REPLY_3945_RX, 0x1b
[ 920.375533] iwl3945: I iwl3945_rx_handle r = 168, i = 167, REPLY_3945_RX, 0x1b
[ 920.480022] iwl3945: I iwl3945_rx_handle r = 169, i = 168, REPLY_3945_RX, 0x1b
[ 920.585277] iwl3945: I iwl3945_rx_handle r = 170, i = 169, REPLY_3945_RX, 0x1b
[ 920.688215] iwl3945: I iwl3945_rx_handle r = 171, i = 170, REPLY_3945_RX, 0x1b
[ 920.793857] iwl3945: I iwl3945_rx_handle r = 172, i = 171, REPLY_3945_RX, 0x1b
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [BUG] iwlwifi 3945 works only with disable_hw_scan=1
2008-06-11 15:07 Maxim Levitsky
@ 2008-06-12 3:28 ` Zhu Yi
2008-06-12 12:13 ` Maxim Levitsky
0 siblings, 1 reply; 5+ messages in thread
From: Zhu Yi @ 2008-06-12 3:28 UTC (permalink / raw)
To: Maxim Levitsky; +Cc: linux-wireless, ipw3945-devel
On Wed, 2008-06-11 at 18:07 +0300, Maxim Levitsky wrote:
> [ 87.270433] wlan0: Initial auth_alg=0
> [ 87.270433] wlan0: authenticate with AP 00:1b:9e:d8:77:02
> [ 87.273477] wlan0: RX authentication from 00:1b:9e:d8:77:02 (alg=0
> transaction=2 status=0)
> [ 87.273477] wlan0: authenticated
> [ 87.273477] wlan0: associate with AP 00:1b:9e:d8:77:02
> [ 87.275823] wlan0: RX AssocResp from 00:1b:9e:d8:77:02 (capab=0x411
> status=0 aid=1)
> [ 87.275823] wlan0: associated
> [ 87.275823] wlan0: switched to short barker preamble
> (BSSID=00:1b:9e:d8:77:02)
> [ 87.276185] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 92.713277] APIC error on CPU0: 40(40)
> [ 97.885625] wlan0: no IPv6 routers present
> [ 111.766658] wlan0: no IPv6 routers present
> [ 112.121332] APIC error on CPU0: 40(40)
> [ 144.876825] APIC error on CPU0: 40(40)
> [ 158.676958] APIC error on CPU0: 40(40)
> [ 212.915533] APIC error on CPU0: 40(40)
> [ 290.079923] APIC error on CPU0: 40(40)
> [ 290.632507] APIC error on CPU0: 40(40)
> [ 296.557068] APIC error on CPU0: 40(40)
> [ 303.989147] APIC error on CPU0: 40(40)
> [ 305.782793] APIC error on CPU0: 40(40)
> [ 307.150566] APIC error on CPU0: 40(40)
> [ 310.248346] APIC error on CPU0: 40(40)
> [ 310.657006] APIC error on CPU0: 40(40)
> [ 311.453595] APIC error on CPU0: 40(40)
> [ 317.468024] APIC error on CPU0: 40(40)
> [ 321.284080] APIC error on CPU0: 40(40)
> [ 328.179853] APIC error on CPU0: 40(40)
> [ 330.127038] APIC error on CPU0: 40(40)
> [ 332.437435] APIC error on CPU0: 40(40)
> [ 335.326931] APIC error on CPU0: 40(40)
> [ 335.881538] APIC error on CPU0: 40(40)
> [ 337.790227] APIC error on CPU0: 40(40)
> [ 368.373446] APIC error on CPU0: 40(40)
> [ 369.809138] APIC error on CPU0: 40(40)
> [ 374.289855] APIC error on CPU0: 40(40)
> [ 375.768238] APIC error on CPU0: 40(40)
> [ 382.440748] APIC error on CPU0: 40(40)
> [ 383.159443] APIC error on CPU0: 40(40)
> [ 383.529522] APIC error on CPU0: 40(40)
> [ 383.906913] APIC error on CPU0: 40(40)
> [ 384.356990] APIC error on CPU0: 40(40)
> [ 384.610941] APIC error on CPU0: 40(40)
> [ 386.305185] APIC error on CPU0: 40(40)
> [ 386.935949] APIC error on CPU0: 40(40)
> [ 390.071741] APIC error on CPU0: 40(40)
> [ 390.403979] APIC error on CPU0: 40(40)
> [ 391.114519] APIC error on CPU0: 40(40)
> [ 391.528138] APIC error on CPU0: 40(40)
> [ 403.677688] APIC error on CPU0: 40(40)
> [ 404.140181] APIC error on CPU0: 40(40)
> [ 406.270920] APIC error on CPU0: 40(40)
> [ 406.927867] APIC error on CPU0: 40(40)
> [ 418.880757] APIC error on CPU0: 40(40)
> [ 419.235211] APIC error on CPU0: 40(40)
> [ 437.974455] APIC error on CPU0: 40(40)
> [ 438.193878] APIC error on CPU0: 40(40)
> [ 443.974790] APIC error on CPU0: 40(40)
> [ 444.177027] APIC error on CPU0: 40(40)
> [ 479.469645] APIC error on CPU0: 40(40)
> [ 479.720979] APIC error on CPU0: 40(40)
> [ 497.925734] APIC error on CPU0: 40(40)
> [ 498.202985] APIC error on CPU0: 40(40)
> [ 526.922424] APIC error on CPU0: 40(40)
> [ 527.607409] APIC error on CPU0: 40(40)
> [ 715.960235] APIC error on CPU0: 40(40)
> [ 716.232556] APIC error on CPU0: 40(40)
> [ 753.480442] APIC error on CPU0: 40(40)
> [ 753.820830] APIC error on CPU0: 40(40)
> [ 774.693756] APIC error on CPU0: 40(40)
> [ 774.867494] APIC error on CPU0: 40(40)
> [ 815.787137] APIC error on CPU0: 40(40)
> [ 816.308363] APIC error on CPU0: 40(40)
> [ 841.546917] APIC error on CPU0: 40(40)
> [ 842.082173] APIC error on CPU0: 40(40)
> [ 847.758887] ACPI: PCI interrupt for device 0000:06:00.0 disabled
It looks the association is succeeded. But 5 minutes later it got an
APIC error. Then I found this error is with lot of devices in your
system. Not sure about what caused this. Can you please try disable MSI
with boot param pci=nomsi?
I don't understand why "disable_hw_scan=1" works for you. Can you also
attach the dmesg for it?
Thanks,
-yi
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] iwlwifi 3945 works only with disable_hw_scan=1
2008-06-12 3:28 ` Zhu Yi
@ 2008-06-12 12:13 ` Maxim Levitsky
0 siblings, 0 replies; 5+ messages in thread
From: Maxim Levitsky @ 2008-06-12 12:13 UTC (permalink / raw)
To: Zhu Yi; +Cc: linux-wireless, ipw3945-devel
Zhu Yi wrote:
> On Wed, 2008-06-11 at 18:07 +0300, Maxim Levitsky wrote:
>> [ 87.270433] wlan0: Initial auth_alg=0
>> [ 87.270433] wlan0: authenticate with AP 00:1b:9e:d8:77:02
>> [ 87.273477] wlan0: RX authentication from 00:1b:9e:d8:77:02 (alg=0
>> transaction=2 status=0)
>> [ 87.273477] wlan0: authenticated
>> [ 87.273477] wlan0: associate with AP 00:1b:9e:d8:77:02
>> [ 87.275823] wlan0: RX AssocResp from 00:1b:9e:d8:77:02 (capab=0x411
>> status=0 aid=1)
>> [ 87.275823] wlan0: associated
>> [ 87.275823] wlan0: switched to short barker preamble
>> (BSSID=00:1b:9e:d8:77:02)
>> [ 87.276185] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [ 92.713277] APIC error on CPU0: 40(40)
>> [ 97.885625] wlan0: no IPv6 routers present
>> [ 111.766658] wlan0: no IPv6 routers present
>> [ 112.121332] APIC error on CPU0: 40(40)
>> [ 144.876825] APIC error on CPU0: 40(40)
>> [ 158.676958] APIC error on CPU0: 40(40)
>> [ 212.915533] APIC error on CPU0: 40(40)
>> [ 290.079923] APIC error on CPU0: 40(40)
>> [ 290.632507] APIC error on CPU0: 40(40)
>> [ 296.557068] APIC error on CPU0: 40(40)
>> [ 303.989147] APIC error on CPU0: 40(40)
>> [ 305.782793] APIC error on CPU0: 40(40)
>> [ 307.150566] APIC error on CPU0: 40(40)
>> [ 310.248346] APIC error on CPU0: 40(40)
>> [ 310.657006] APIC error on CPU0: 40(40)
>> [ 311.453595] APIC error on CPU0: 40(40)
>> [ 317.468024] APIC error on CPU0: 40(40)
>> [ 321.284080] APIC error on CPU0: 40(40)
>> [ 328.179853] APIC error on CPU0: 40(40)
>> [ 330.127038] APIC error on CPU0: 40(40)
>> [ 332.437435] APIC error on CPU0: 40(40)
>> [ 335.326931] APIC error on CPU0: 40(40)
>> [ 335.881538] APIC error on CPU0: 40(40)
>> [ 337.790227] APIC error on CPU0: 40(40)
>> [ 368.373446] APIC error on CPU0: 40(40)
>> [ 369.809138] APIC error on CPU0: 40(40)
>> [ 374.289855] APIC error on CPU0: 40(40)
>> [ 375.768238] APIC error on CPU0: 40(40)
>> [ 382.440748] APIC error on CPU0: 40(40)
>> [ 383.159443] APIC error on CPU0: 40(40)
>> [ 383.529522] APIC error on CPU0: 40(40)
>> [ 383.906913] APIC error on CPU0: 40(40)
>> [ 384.356990] APIC error on CPU0: 40(40)
>> [ 384.610941] APIC error on CPU0: 40(40)
>> [ 386.305185] APIC error on CPU0: 40(40)
>> [ 386.935949] APIC error on CPU0: 40(40)
>> [ 390.071741] APIC error on CPU0: 40(40)
>> [ 390.403979] APIC error on CPU0: 40(40)
>> [ 391.114519] APIC error on CPU0: 40(40)
>> [ 391.528138] APIC error on CPU0: 40(40)
>> [ 403.677688] APIC error on CPU0: 40(40)
>> [ 404.140181] APIC error on CPU0: 40(40)
>> [ 406.270920] APIC error on CPU0: 40(40)
>> [ 406.927867] APIC error on CPU0: 40(40)
>> [ 418.880757] APIC error on CPU0: 40(40)
>> [ 419.235211] APIC error on CPU0: 40(40)
>> [ 437.974455] APIC error on CPU0: 40(40)
>> [ 438.193878] APIC error on CPU0: 40(40)
>> [ 443.974790] APIC error on CPU0: 40(40)
>> [ 444.177027] APIC error on CPU0: 40(40)
>> [ 479.469645] APIC error on CPU0: 40(40)
>> [ 479.720979] APIC error on CPU0: 40(40)
>> [ 497.925734] APIC error on CPU0: 40(40)
>> [ 498.202985] APIC error on CPU0: 40(40)
>> [ 526.922424] APIC error on CPU0: 40(40)
>> [ 527.607409] APIC error on CPU0: 40(40)
>> [ 715.960235] APIC error on CPU0: 40(40)
>> [ 716.232556] APIC error on CPU0: 40(40)
>> [ 753.480442] APIC error on CPU0: 40(40)
>> [ 753.820830] APIC error on CPU0: 40(40)
>> [ 774.693756] APIC error on CPU0: 40(40)
>> [ 774.867494] APIC error on CPU0: 40(40)
>> [ 815.787137] APIC error on CPU0: 40(40)
>> [ 816.308363] APIC error on CPU0: 40(40)
>> [ 841.546917] APIC error on CPU0: 40(40)
>> [ 842.082173] APIC error on CPU0: 40(40)
>> [ 847.758887] ACPI: PCI interrupt for device 0000:06:00.0 disabled
>
> It looks the association is succeeded. But 5 minutes later it got an
> APIC error. Then I found this error is with lot of devices in your
> system. Not sure about what caused this. Can you please try disable MSI
> with boot param pci=nomsi?
>
> I don't understand why "disable_hw_scan=1" works for you. Can you also
> attach the dmesg for it?
>
> Thanks,
> -yi
>
Forgot to tell you that you can ignore the APIC error.
I tested and I know that this error happens always, when CPU fan speed
change, so I guess this is unrelated)
Best regards,
Maxim levitsky
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG] iwlwifi 3945 works only with disable_hw_scan=1
@ 2008-06-11 15:47 Maxim Levitsky
0 siblings, 0 replies; 5+ messages in thread
From: Maxim Levitsky @ 2008-06-11 15:47 UTC (permalink / raw)
To: linux-wireless; +Cc: ipw3945-devel
Maxim Levitsky wrote:
> I recently bought an acer aspire 5720G, and wireless didn't work with
> standard ubuntu 2.6.24 kernel.
>
> I found that specifying the above option 'fixes' the driver
> but I also noticed that list of available access points shrinks
> to just one (the connected) point.
>
> Moreover there is a trouble in changing a access point, it just hangs.
> the button that toggles wireless does work, but doesn't blink.
>
> I then installed latest -git kernel (~ 2.6.26-rc4) and got this:
>
> * I still have to use disable_hw_scan=1
> * Wireless led works thanks to acer-wmi
> * If I disable wireless with the button, I _can't_ re-enable it unless
> I reload the module.
>
> * List of access points doesn't shrink, and I can switch between those points.
>
>
> When I omit disable_hw_scan=1, I get errors about REPLY_SCAN_CMD
> I will send detailed debug info later.
>
> Best regards,
> Maxim Levitsky
I found why I can't reenable wireless with wireless button.
It turns out that iwlwifi doesn't enable the wireless function after a
R/F kill switch was enabled ether by the button or explicitly.
I bisected this to commit 5a66926aa9230810704fd5a127966215fd58881e
in linus tree.
Best regards,
Maxim Levitsky
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-06-12 12:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-06 19:34 [BUG] iwlwifi 3945 works only with disable_hw_scan=1 Maxim Levitsky
-- strict thread matches above, loose matches on Subject: below --
2008-06-11 15:07 Maxim Levitsky
2008-06-12 3:28 ` Zhu Yi
2008-06-12 12:13 ` Maxim Levitsky
2008-06-11 15:47 Maxim Levitsky
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).