* [PATCH] ssb-pcicore: Fix IRQ-vector init on embedded devices
@ 2008-07-04 21:44 Michael Buesch
0 siblings, 0 replies; only message in thread
From: Michael Buesch @ 2008-07-04 21:44 UTC (permalink / raw)
To: John Linville
Cc: Steve Brown, OpenWrt Development List, bcm43xx-dev,
linux-wireless
On embedded devices we must not route the interrupts through
the PCI core, if our host-bus is not PCI.
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
---
John, If still possible, please queue for 2.6.26.
Index: wireless-testing/drivers/ssb/driver_pcicore.c
===================================================================
--- wireless-testing.orig/drivers/ssb/driver_pcicore.c 2008-06-10 13:58:23.000000000 +0200
+++ wireless-testing/drivers/ssb/driver_pcicore.c 2008-07-04 23:16:02.000000000 +0200
@@ -537,6 +537,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
int err = 0;
u32 tmp;
+ if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
+ /* This SSB device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
+
if (!pdev)
goto out;
bus = pdev->bus;
--
Greetings Michael.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-07-04 21:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-04 21:44 [PATCH] ssb-pcicore: Fix IRQ-vector init on embedded devices Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).