From: Nick Kossifidis <mick@madwifi.org>
To: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, jirislaby@gmail.com, mcgrof@gmail.com
Subject: [PATCH 7/12] ath5k: Add RF2425 initial rfgain values
Date: Sun, 20 Jul 2008 06:42:47 +0300 [thread overview]
Message-ID: <20080720034247.GG7440@makis> (raw)
* Add initial RF gain settings for RF2425
Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index afd8689..66af70b 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = {
{ AR5K_RF_GAIN(63), { 0x000000f9 } },
};
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x000001b0 } },
+ { AR5K_RF_GAIN(19), { 0x000001f0 } },
+ { AR5K_RF_GAIN(20), { 0x00000030 } },
+ { AR5K_RF_GAIN(21), { 0x00000070 } },
+ { AR5K_RF_GAIN(22), { 0x00000171 } },
+ { AR5K_RF_GAIN(23), { 0x000001b1 } },
+ { AR5K_RF_GAIN(24), { 0x000001f1 } },
+ { AR5K_RF_GAIN(25), { 0x00000031 } },
+ { AR5K_RF_GAIN(26), { 0x00000071 } },
+ { AR5K_RF_GAIN(27), { 0x000001b8 } },
+ { AR5K_RF_GAIN(28), { 0x000001f8 } },
+ { AR5K_RF_GAIN(29), { 0x00000038 } },
+ { AR5K_RF_GAIN(30), { 0x00000078 } },
+ { AR5K_RF_GAIN(31), { 0x000000b8 } },
+ { AR5K_RF_GAIN(32), { 0x000001b9 } },
+ { AR5K_RF_GAIN(33), { 0x000001f9 } },
+ { AR5K_RF_GAIN(34), { 0x00000039 } },
+ { AR5K_RF_GAIN(35), { 0x00000079 } },
+ { AR5K_RF_GAIN(36), { 0x000000b9 } },
+ { AR5K_RF_GAIN(37), { 0x000000f9 } },
+ { AR5K_RF_GAIN(38), { 0x000000f9 } },
+ { AR5K_RF_GAIN(39), { 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x000000f9 } },
+};
+
static const struct ath5k_gain_opt rfgain_opt_5112 = {
1,
8,
@@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
freq = 0; /* only 2Ghz */
break;
case AR5K_RF2425:
- ath5k_rfg = rfgain_2413;
- size = ARRAY_SIZE(rfgain_2413);
+ ath5k_rfg = rfgain_2425;
+ size = ARRAY_SIZE(rfgain_2425);
freq = 0; /* only 2Ghz */
break;
default:
next reply other threads:[~2008-07-20 3:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-20 3:42 Nick Kossifidis [this message]
2008-07-24 21:39 ` [PATCH 7/12] ath5k: Add RF2425 initial rfgain values Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080720034247.GG7440@makis \
--to=mick@madwifi.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=jirislaby@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).